550 Geowissenschaften
Refine
Year of publication
Document Type
- Article (540) (remove)
Has Fulltext
- yes (540)
Is part of the Bibliography
- no (540)
Keywords
- climate change (6)
- Climate change (5)
- Atmospheric chemistry (4)
- loess (4)
- Biogeochemistry (3)
- COSMO-CLM (3)
- Geochemistry (3)
- Klimawandel (3)
- Palaeoclimate (3)
- Bayesian network (2)
Institute
- Geowissenschaften (540) (remove)
Carbonate archives record a brief snapshot of the ambient Earth’s surface conditions at their deposition. However, the geologically reasonable extraction and interpretation of geochemical proxy data from ancient, diagenetically altered rock archives is fraught with problems. Three issues stand out: the dichotomy between petrographic and geochemical alteration; the lack of quantitative age constraints for specific diagenetic phases resulting in a poorly constrained admixture of local, basin-wide and over-regional (far-field) features; and an often insufficient understanding of the temperatures and compositions of diagenetic fluids. Here, the archive of Devonian marine limestones exposed to multiple far-field diagenetic events is used as an example to explore the above-listed issues. Methods applied include petrography, micro XRF, fluid inclusion data, clumped isotopes, δ13C and δ18O isotopes, 87Sr/86Sr ratios and quartz trace element data. Devonian limestones studied here were overprinted by two cross-cutting regional fault zones (T ≈ 230 °C) by multiple events between the Variscan Orogeny and the late Paleogene. The following processes are recorded: (i) protolith deposition and partial dolomitisation during rapid burial in the Middle/Late Devonian (T ≈ 180 °C); (ii) deep burial to ca 6.5 km and tectonic/hydrothermal overprint during the Variscan Orogeny in the Carboniferous (T ≈ 90–230 °C); (iii) rapid uplift to 1–2 km burial depth at the end of the Variscan Orogeny and hypogene karstification (T ≈ 50 to 100 °C) initiated by regional geology in the Permian/Triassic; (iv) tectonic/hydrothermal overprint during the opening of the Proto-Atlantic Ocean between the Early Jurassic and the Early Cretaceous (T ≈ 50 to 130 °C); (v) tectonic/hydrothermal overprint including renewed hypogene karstification and hydrothermal calcite cement precipitation (T ≈ 50 to 180 °C) during Alpine Orogeny between the Late Cretaceous and late Paleogene. Despite this complex series of diagenetic events, the protolith limestones largely preserved their respective Middle/Late Devonian dissolved inorganic carbon (DIC) and 87Sr/86Sr signatures. This study documents that geochemical proxy data, placed into their petrographic, paleotemperature, and local to over-regional context, significantly increases the ability to extract quantitative information from ancient carbonate rock archives. Research shown here has wider relevance for carbonate archive research in general.
Highlights
• Constrictional structures range from dome-and-basin folds to coeval folds and boudins.
• Under bulk constriction, the competent layer rotates slower than a passive plane.
• Extension-parallel and –perpendicular folds grow simultaneously.
• Extension-perpendicular folds affect previous boudins.
Abstract
We conducted scaled analogue modelling to show the influence of varying single layer initial orientation on the geometry of folds and boudins in a bulk constrictional strain field. The initial angle between the plane of shortening and the competent layer (θZ(i)) was incrementally increased from 0° to 90° by multiples of 11.25°. While the amount of layer thickening decreased with increasing θZ(i), the deformation structures produced range from pure dome-and-basin folds to coeval folds and boudins. Based on the attitude of fold axes, there are extension-parallel (FEPR) and extension-perpendicular (FEPP) folds, with axes subparallel and subperpendicular to the principal stretching axis (X), respectively. Coeval growth of FEPR folds and boudins occurred when θZ(i) > ca. 25°. The FEPP folds can be subdivided into a first type which affect the entire layer (if θZ(i) ranges between 11.25 and 78.75°) and a second type, referred to as FBEPP folds, which are affecting pre-existing boudins if θZ(i) > 45°. The interlimb angle of all types of folds increases with increasing θZ(i). Folds and boudins similar to the ones produced in this study can be found in salt domes and in tectonites of subduction zones.
Non-matrix-matched calibration of laser ablation ICPMS (trace/major) element data is a common quantification strategy. However, LA sampling is associated with downhole elemental fractionation, potentially causing inaccuracies if the magnitude of fractionation between the sample and reference material (RM) differs. Here, we estimate fractionation factors (FFs) for different elements (El) in a range of RMs relative to NIST SRM610/612 (FFEl/Ca-NIST) and evaluate element-specific corrections for downhole fractionation using these measured FFEl/Ca-NIST. Significantly different mean El/Ca values were observed before and after correction, particularly for the alkali elements (all RMs), and B, Fe, and Zn (some RMs), notably improving accuracy, especially for the alkali elements. In cases where this methodology does not result in an accuracy improvement, this may help identify underlying issues in reported/reference values for RMs, given that this phenomenon should be accounted for. Overall, we recommend considering routine assessment of FFs and applying a FF correction to enhance data quality.
Highlights
• We find DBrfluid/melt = 1.19 to 3.92 for experimental Br degassing from basalt magma into aqueous fluids.
• D <1 under almost dry conditions propose only little Br degassing for dry intra-plate volcanism relative to volcanic arcs.
• An annual global Br flux of 23.5–72.9 × 109 g/y into the atmosphere was calculated.
Abstract
We present the first in-situ partitioning data for bromine between a natural basaltic melt and a coexisting fluid. For this study hydrothermal diamond anvil cell experiments at pressures up to 1.7 GPa were conducted. We combined laser heating to melt the basalt glass with external heating to lower the temperature gradient in the cell and to initiate circulation for the aqueous fluid. Bromine concentrations were measured in-situ with X-ray fluorescence in the basaltic melts, glasses, and in the fluid. From the results we calculated partition coefficients of DBrfluid/melt = 1.19 to 3.92 in the range of 0.4 to 1 GPa for aqueous fluids. Experiments with neon as the surrounding fluid (DBrfluid/melt = 0.38 ± 0.01 at 1.1 GPa) suggest that Br-release from a basalt into volatiles that have no bonding affinity with Br is weak. This should be the case for dry intra-plate volcanic eruptions. From the experimentally gained partition coefficients and from global Br concentration values in melt inclusions of arc magmas, we calculated an annual global Br flux of 23.5–72.9 × 109 g/y.
We present a new experimental dataset on the impact of the heavy halogens chlorine, bromine and iodine on the Raman water bands concerning pressure and their concentration at room temperature. These experiments were conducted at ambient temperature, with variations in halogen concentration and pressure ranging from 0 to 1.4 GPa.
The strength of the Raman water band shift change increases with the ionic size from chlorine, over bromine, to iodine. Our experiments further demonstrate that increased pressure diminishes the impact of the halogen shift change to a varying extent for each of the three halogens. This finding can have significant implications for the salinity calculation of fluid inclusions in minerals such as quartz or olivine. Particularly in the low salinity range, the concentration can be markedly underestimated if the pressure effect is neglected. For experiments in diamond anvil cells involving halogens dissolved in water, the change in Raman water band shifts can serve either as a new tool to monitor pressure, or to monitor the salinity.
Highlights
• We present the first results of a deep learning model based on a convolutional neural network for earthquake magnitude estimation, using HR-GNSS displacement time series.
• The influence of different dataset configurations, such as station numbers, epicentral distances, signal duration, and earthquake size, were analyzed to figure out how the model can be adapted to various scenarios.
• The model was tested using real data from different regions and magnitudes, resulting in the best cases with 0.09 ≤ RMS ≤ 0.33.
Abstract
High-rate Global Navigation Satellite System (HR-GNSS) data can be highly useful for earthquake analysis as it provides continuous high-frequency measurements of ground motion. This data can be used to analyze diverse parameters related to the seismic source and to assess the potential of an earthquake to prompt strong motions at certain distances and even generate tsunamis. In this work, we present the first results of a deep learning model based on a convolutional neural network for earthquake magnitude estimation, using HR-GNSS displacement time series. The influence of different dataset configurations, such as station numbers, epicentral distances, signal duration, and earthquake size, were analyzed to figure out how the model can be adapted to various scenarios. We explored the potential of the model for global application and compared its performance using both synthetic and real data from different seismogenic regions. The performance of our model at this stage was satisfactory in estimating earthquake magnitude from synthetic data with 0.07 ≤ RMS ≤ 0.11. Comparable results were observed in tests using synthetic data from a different region than the training data, with RMS ≤ 0.15. Furthermore, the model was tested using real data from different regions and magnitudes, resulting in the best cases with 0.09 ≤ RMS ≤ 0.33, provided that the data from a particular group of stations had similar epicentral distance constraints to those used during the model training. The robustness of the DL model can be improved to work independently from the window size of the time series and the number of stations, enabling faster estimation by the model using only near-field data. Overall, this study provides insights for the development of future DL approaches for earthquake magnitude estimation with HR-GNSS data, emphasizing the importance of proper handling and careful data selection for further model improvements.
PolarCAP – A deep learning approach for first motion polarity classification of earthquake waveforms
(2022)
Highlights
• We present PolarCAP, a deep learning model that can classify the polarity of a waveform with a 98% accuracy.
• The first-motion polarity of seismograms is a useful parameter, but its manual determination can be laborious and imprecise.
• We demonstrate that in several cases the model can assign trace polar-ity more accurately than a human analyst.
Abstract
The polarity of first P-wave arrivals plays a significant role in the effective determination of focal mechanisms specially for smaller earthquakes. Manual estimation of polarities is not only time-consuming but also prone to human errors. This warrants a need for an automated algorithm for first motion polarity determination. We present a deep learning model - PolarCAP that uses an autoencoder architecture to identify first-motion polarities of earth-quake waveforms. PolarCAP is trained in a supervised fashion using more than 130,000 labelled traces from the Italian seismic dataset (INSTANCE) and is cross-validated on 22,000 traces to choose the most optimal set of hyperparameters. We obtain an accuracy of 0.98 on a completely unseen test dataset of almost 33,000 traces. Furthermore, we check the model generalizability by testing it on the datasets provided by previous works and show that our model achieves a higher recall on both positive and negative polarities.
Highlights
• Germany plans more long-distances water transfers to secure drinking water supply.
• Long-distance water transfers can unfold lock-ins that limit adaptive water governance.
• Our interdisciplinary case study shows how lock-ins emerge over different spaces and times.
• Commercialisation of water but also local protests contributed to various lock-ins.
• We therefore call for context-specific assessments of potentials and risks of LDWT.
Abstract
Germany plans to expand water transfers over long distances in the light of numerous and pressing challenges for drinking water supply. Research on inter- and intrabasin water transfers warns, however, that major investments in large-scale infrastructure systems accompanied by institutional logics and political interests often lead to a so-called lock-in. As a consequence, long-distance water transfers can limit the potential for adaptive water governance in the involved supply areas over decades with negative impacts for people and the environment. By using a case study in Germany as an example, we researched when, where and how such lock-ins around long-distance water transfers emerge. In the infrastructural development of the Elbaue-Ostharz transfer system we found various lock-ins that overlap in space and time. Some are located at the centre others at the margins of the infrastructure and commercialization of the water sector as well as hydraulic and hygienic concerns interlock with local protests in a way that the expansion of the long-distance water transfer infrastructure is presented continuously as imperative. Our findings contribute to a relational understanding of lock-ins of long-distance water transfers as contingent and diverse processes. Given the widespread occurrence of lock-ins, we argue for a context-specific assessment of potentials and risks of long-distance water transfers in times of multiple crises.
Highlights
• New fumarole and thermal water data for Askja and Kverkfjöll volcanoes, Iceland.
• Data compared to modelled compositions and fluxes of magmatic gas.
• Fumarole compositions compatible with origin of CO2 and S from degassing intrusions.
• Intrusive magmatic fluxes sufficient to sustain hydrothermal fluxes of CO2 and S in Iceland
• Magma degassing insignificant/minor source of H2O and Cl to Icelandic hydrothermal fluids
Abstract
Mantle volatiles are transported to Earth's crust and surface by basaltic volcanism. During subaerial eruptions, vast amounts of carbon, sulfur and halogens can be released to the atmosphere during a short time-interval, with impacts ranging in scale from the local environment to the global climate. By contrast, passive volatile release at the surface originating from magmatic intrusions is characterized by much lower flux, yet may outsize eruptive volatile quantities over long timescales. Volcanic hydrothermal systems (VHSs) act as conduits for such volatile release from degassing intrusions and can be used to gauge the contribution of intrusive magmatism to global volatile cycles. Here, we present new compositional and isotopic (δD and δ18O-H2O, 3He/4He, δ13C-CO2, Δ33S-δ34S-H2S and SO4) data for thermal waters and fumarole gases from the Askja and Kverkfjöll volcanoes in central Iceland. We use the data together with magma degassing modelling and mass balance calculations to constrain the sources of volatiles in VHSs and to assess the role of intrusive magmatism to the volcanic volatile emission budgets in Iceland.
The CO2/ΣS (10−30), 3He/4He (8.3–10.5 RA; 3He/4He relative to air), δ13C-CO2 (−4.1 to −0.2 ‰) and Δ33S-δ34S-H2S (−0.031 to 0.003 ‰ and −1.5 to +3.6‰) values in high-gas flux fumaroles (CO2 > 10 mmol/mol) are consistent with an intrusive magmatic origin for CO2 and S at Askja and Kverkfjöll. We demonstrate that deep (0.5–5 kbar, equivalent to ∼2–18 km crustal depth) decompression degassing of basaltic intrusions in Iceland results in CO2 and S fluxes of 330–5060 and 6–210 kt/yr, respectively, which is sufficient to account for the estimated CO2 flux of Icelandic VHSs (3365–6730 kt/yr), but not the VHS S flux (220–440 kt/yr). Secondary, crystallization-driven degassing from maturing intrusions and leaching of crustal rocks are suggested as additional sources of S. Only a minor proportion of the mantle flux of Cl is channeled via VHSs whereas the H2O flux remains poorly constrained, because magmatic signals in Icelandic VHSs are masked by a dominant shallow groundwater component of meteoric water origin. These results suggest that the bulk of the mantle CO2 and S flux to the atmosphere in Iceland is supplied by intrusive, not eruptive magmatism, and is largely vented via hydrothermal fields.
Highlights
• Subcrustal earthquakes detected beneath Fogo volcano, Cape Verde.
• At the focal depth of 40 km temperatures are likely too high for brittle failure.
• The earthquakes may originate from magma injection into a deep subcrustal reservoir.
• This observation indicates a distinct magma supply system of Fogo volcano.
Abstract
Fogo volcano belongs to the Cape Verde hotspot and its most recent eruption occurred from November 2014 to February 2015. From January to December 2016 we operated a temporary seismic network and array on Fogo and were able to locate 289 earthquakes in total. Array analysis shows that most of the events occur within the crust at distances >25 km near the neighboring island of Brava. However, on 15th August 2016 the network recorded an isolated cluster of >20 earthquakes, 13 of which could be located beneath the southern part of Fogo. The differences between S- and P-wave arrival times at steep incidence clearly indicate focal depths between approximately 38 and 44 km whereas receiver-function analyses place the Moho discontinuity at depths between 11 and 14 km. Thus, the earthquakes are located well within the upper mantle directly beneath Fogo. In view of the elevated upper-mantle temperatures within a hotspot regime, we propose that fracturing induced by magmatic injection is the most likely cause for the observed deep earthquakes.
Highlights
• Full automatized analysis of teleseismic XKS shear wave splitting.
• Rapid analysis of large seismological data sets.
• Automated window selection and quality classification.
• Application to the USArray Transportable Array including expansion to Alaska.
• Improved statistical evidence and objectivity of derived effective splitting.
Abstract
Recent technological advances have led to community wide use of large-scale seismic experiments which produce seismic data on previously impossible scales. Standard processing procedures thus require automatization to facilitate a fast and objective analysis of the data. Among these, XKS-splitting is an important tool to derive first insights into the Earth's deformation regimes at depth by studying seismic anisotropy. Most often, shear-wave splitting is interpreted to represent crystallographic preferred orientation (CPO) of mantle minerals like olivine as dominating feature and can thus be used as a proxy of mantle flow processes. Here, we introduce an addition to the MATLAB®-based SplitRacer tool box (Reiss and Rümpker 2017) which automatizes the entire XKS-splitting procedure. This is achieved by the automatization of 1) choosing a time window based on spectral analyses and 2) categorization of results based on three different XKS-splitting methods (energy minimization, rotation correlation and splitting intensity). This provides effective and objective results for splitting as well as null-measurement results. This extension allows to use SplitRacer without a graphical interface and introduces a bootstrapping statistics as error estimate of the single layer joint splitting method. The procedures are designed to allow a fast and more objective analysis of a vast amount of data, as produced by recent seismic deployments (e.g. USArray, AlpArray). We test this automatization by applying the analysis to the USArray data set, which has approximately 1900 stations with between two to fifteen years of data. We can reproduce the general pattern of the results from former studies with the more objective automatic analysis. Based on a joint-splitting approach, we approximate the splitting effect at individual stations by a single anisotropic layer. As we include null-measurements as well as a larger data set as previous studies, we can provide improved statistical evidence for these effective splitting parameters.
Highlights
• We show the first observations of seismo-acoustic tremor at Oldoinyo Lengai, the world's only active carbonatite volcano.
• We observe significant changes in seismic and acoustic tremor properties and their correlation in one year of data collection.
• Using satellite-based thermal data, we identify different volcanic processes (degassing, lava pond dynamics and spattering).
Abstract
We analyze volcanic tremor from Oldoinyo Lengai, Tanzania, which is currently the only active volcano on Earth producing carbonatitic lavas. Here, we use data from the recent SEISVOL deployment and focus on a co-located seismic and infrasound station about 200 m below the summit. We show the very first observations of seismo-acoustic tremor caused by carbonatitic eruptions. This seismo-acoustic tremor is highly variable throughout the ∼one year of data which we characterize by analyzing its seismic amplitude, duration, recurrence, dominant seismic frequency and harmonics. Frequency gliding occurs frequently and over short (minutes to hours) to long time scales (hours to days) and likely reflects different time-dependent mechanisms, such as evenly-spaced repeating events with a change in inter-event times, crater dynamics that alter resonators, and dike intrusions. Seismic and acoustic wavefields correlate well for stronger eruptive sequences but are only partially coherent which suggests that high-frequency seismic tremor (up to 25 Hz) may be caused by the low viscosity of the carbonatitic melt and not by ground-coupled airwaves. In addition, the comparison between seismic-acoustic and satellite InfraRed thermal data allows us to infer different volcanic activity styles which partially alternate throughout the year: intrusive activity and the construction of hornitos, degassing, activity from a lava pond, and varying styles of extrusive activity, in particular spattering. Our study provides important insights into the eruption dynamics of this peculiar volcano which suggests shallow melt storage within the crater floor.
Although global- and catchment-scale hydrological models are often shown to accurately simulate long-term runoff time-series, far less is known about their suitability for capturing hydrological extremes, such as droughts. Here we evaluated simulations of hydrological droughts from nine catchment scale hydrological models (CHMs) and eight global scale hydrological models (GHMs) for eight large catchments: Upper Amazon, Lena, Upper Mississippi, Upper Niger, Rhine, Tagus, Upper Yangtze and Upper Yellow. The simulations were conducted within the framework of phase 2a of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP2a). We evaluated the ability of the CHMs, GHMs and their respective ensemble means (Ens-CHM and Ens-GHM) to simulate observed hydrological droughts of at least one month duration, over 31 years (1971–2001). Hydrological drought events were identified from runoff-deficits and the Standardised Runoff Index (SRI). In all catchments, the CHMs performed relatively better than the GHMs, for simulating monthly runoff-deficits. The number of drought events identified under different drought categories (i.e. SRI values of -1 to -1.49, -1.5 to -1.99, and ≤-2) varied significantly between models. All the models, as well as the two ensemble means, have limited abilities to accurately simulate drought events in all eight catchments, in terms of their occurrence and magnitude. Overall, there are opportunities to improve both CHMs and GHMs for better characterisation of hydrological droughts.
Knowledge about the initial tectonic and depositional dynamics, as well as the influence of early rifting on climate and environmental evolution remains speculative to a large extent, because sediments are usually deeply buried. Within the East African Rift System, inversion tectonics uplifted a few of these successions to the surface hence presenting rare windows into the pre-rift depositional history. One such example, an exceptional 700 m long and up to 60 m high fresh road cut provided the opportunity to study in detail initial rift successions of the southern Albertine Rift (Western Uganda). This focusses on the basal and poorly known Middle to Late Miocene in order to unravel the climatic, environmental, hydrological and tectonic evolution of the initial Albertine Rift. A large and robust multi-proxy dataset was gathered comprising 169 m of stratigraphic thickness, which spans from 14.5 to 4.9 Ma according to a revised lithostratigraphic model. Fieldwork comprised logging of the sedimentary record, spectral gamma ray, magnetic susceptibility and 2D wall mapping with photomosaics. Additionally, the sections were sampled for bulk mineral and clay mineral analysis. The succession exposes a suite of lithofacies and architectural elements detailing the evolution of a fluvio-lacustrine system. Five depositional environments were identified which show an overall back-stepping trend from an alluvial plain to a delta plain and finally palustrine/shallow lacustrine conditions. Mesoscale base-level cycles, preservation potential of architectural elements, and stacking pattern exhibit limited accommodation space. However, it increases over time. This overall trend indicates increasing tectonic subsidence, which can be explained by flexural downwarp within the pre-rift phase and in the upper part grading into fault-controlled crustal extension of the syn-rift phase, which more and more disrupted a large-scale river system. From the Middle Miocene up to the early Pliocene, this study revealed that palaeoclimate trends become marked by increasing and more fluctuating Th concentrations, loss of feldspar, intercalated lenses of hydroxosulphate minerals, and a shift from smectite-dominated to kaolinite-dominated clays. These signals are all interpreted as detrital except for the hydroxosulphates, and they mirror the increasing intensity of chemical weathering and stripping of soils in the catchment. A trend towards increasing humidity is supported by an increase in lacustrine sediment facies and a lake-level rise. Nevertheless, intercalation of hydroxosulphate, ferricretes and pedogenised horizons prove ongoing seasonality and dry intervals. Finally, based on a revised stratigraphic model a sequence stratigraphic correlation of the outcrop's depositional cycles with basin-scale cycles is presented. According to these cycles, transition from the pre-rift to the syn-rift stage is marked by an unconformity and a tectonic pulse in the latest Miocene. However, the response of fluvial supply, the depositional system as well as climate conditions are less punctuated and characterised by gradual trends and temporal delays. The long pre-rift phase (ca 10 Myr) and the gradual transition to the syn-rift phase is in accordance with the active rifting model, which is based on thermal thinning of the lithosphere by asthenospheric upwelling.
Herein, the high-pressure/high-temperature synthesis (11 GPa, 650 °C) of Tb3B10O17(OH)5 in a modified Walker-type multianvil device is presented. The structure of this rare-earth borate was determined by single-crystal X-ray diffraction methods and was found to crystallize orthorhombically in the space group Pmn21 (no. 31) with the unit cell parameters a = 16.2527(4), b = 4.4373(1), and c = 8.8174(2) Å. The new compound was further characterized using infrared spectroscopy, energy-dispersive X-ray spectroscopy, second harmonic generation (SHG) measurements, and temperature-dependent X-ray powder diffraction. Tb3B10O17(OH)5 decomposes to β-Tb(BO2)3 at temperatures higher than 460 °C. With increasing temperatures, the formation of μ-TbBO3 was observed, which transforms to π-TbBO3 upon cooling.
High-pressure/high-temperature synthesis of the new boron-rich terbium hydroxyborate Tb3B12O19(OH)7
(2023)
Monoclinic Tb3B12O19(OH)7 was obtained by multianvil high-pressure/high-temperature syntheses at 6 GPa and 650 °C. The crystal structure was investigated by single-crystal X-ray diffraction methods and space group C2 (no. 5) with the unit cell parameters a = 24.2299(5) Å, b = 4.4667(1) Å, c = 7.0964(2) Å, β = 94.58(1)°, and two formula units per cell were revealed. Powder X-ray diffraction, infrared spectroscopy and the investigation of its second harmonic generation properties support the proposed structural model.
Local climate change risk assessments (LCCRAs) are best supported by a quantitative integration of physical hazards, exposures and vulnerabilities that includes the characterization of uncertainties. We propose to use Bayesian Networks (BNs) for this task and show how to integrate freely-available output of multiple global hydrological models (GHMs) into BNs, in order to probabilistically assess risks for water supply. Projected relative changes in hydrological variables computed by three GHMs driven by the output of four global climate models were processed using MATLAB, taking into account local information on water availability and use. A roadmap to set up BNs and apply probability distributions of risk levels under historic and future climate and water use was co-developed with experts from the Maghreb (Tunisia, Algeria, Morocco) who positively evaluated the BN application for LCCRAs. We conclude that the presented approach is suitable for application in the many LCCRAs necessary for successful adaptation to climate change world-wide.
At high pressures, autoionization – along with polymerization and metallization – is one of the responses of simple molecular systems to a rise in electron density. Nitrosonium nitrate (NO+NO3−), known for this property, has attracted a large interest in recent decades and was reported to be synthesized at high pressure and high temperature from a variety of nitrogen–oxygen precursors, such as N2O4, N2O and N2–O2 mixtures. However, its structure has not been determined unambiguously. Here, we present the first structure solution and refinement for nitrosonium nitrate on the basis of single-crystal X-ray diffraction at 7.0 and 37.0 GPa. The structure model (P21/m space group) contains the triple-bonded NO+ cation and the NO3− sp2-trigonal planar anion. Remarkably, crystal-chemical considerations and accompanying density-functional-theory calculations show that the oxygen atom of the NO+ unit is positively charged – a rare occurrence when in the presence of a less-electronegative element.
Diamonds growing in the Earth’s mantle often trap inclusions of fluids that are highly saline in composition. These fluids are thought to emerge from deep in subduction zones and may also be involved in the generation of some of the kimberlite magmas. However, the source of these fluids and the mechanism of their transport into the mantle lithosphere are unresolved. Here, we present experimental results showing that alkali chlorides are stable solid phases in the mantle lithosphere below 110 km. These alkali chlorides are formed by the reaction of subducted marine sediments with peridotite and show identical K/Na ratios to fluid inclusions in diamond. At temperatures >1100°C and low pressures, the chlorides are unstable; here, potassium is accommodated in mica and melt. The reaction of subducted sediments with peridotite explains the occurrence of Mg carbonates and the highly saline fluids found in diamonds and in chlorine-enriched kimberlite magmas.
Metasomatic reaction zones between mafic and ultramafic rocks exhumed from subduction zones provide a window into mass-transfer processes at high pressure. However, accurate interpretation of the rock record requires distinguishing high-pressure metasomatic processes from inherited oceanic signatures prior to subduction. We integrated constraints from bulk-rock geochemical compositions and petrophysical properties, mineral chemistry, and thermodynamic modeling to understand the formation of reaction zones between juxtaposed metagabbro and serpentinite as exemplified by the Voltri Massif (Ligurian Alps, Italy). Distinct zones of variably metasomatized metagabbro are dominated by chlorite, amphibole, clinopyroxene, epidote, rutile, ilmenite, and titanite between serpentinite and eclogitic metagabbro. Whereas the precursor serpentinite and oxide gabbro formed and were likely already in contact in an oceanic setting, the reaction zones formed by diffusional Mg-metasomatism between the two rocks from prograde to peak, to retrograde conditions in a subduction zone. Metasomatism of mafic rocks by Mg-rich fluids that previously equilibrated with serpentinite could be widespread along the subduction interface, within the subducted slab, and the mantle wedge. Furthermore, the models predict that talc formation by Si-metasomatism of serpentinite in subduction zones is limited by pressure-dependent increase in the silica activity buffered by the serpentine-talc equilibrium. Elevated activities of aqueous Ca and Al species would also favor the formation of chlorite and garnet. Accordingly, unusual conditions or processes would be required to stabilize abundant talc at high P-T conditions. Alternatively, a different set of mineral assemblages, such as serpentine- or chlorite-rich rocks, may be controlling the coupling-decoupling transition of the plate interface.
Talc formation via silica-metasomatism of ultramafic rocks is believed to play key roles in subduction zone processes. Yet, the conditions of talc formation remain poorly constrained. We used thermodynamic reaction-path models to assess the formation of talc at the slab-mantle interface and show that it is restricted to a limited set of pressure–temperature conditions, protolith, and fluid compositions. In contrast, our models predict that chlorite formation is ubiquitous at conditions relevant to the slab-mantle interface of subduction zones. The scarcity of talc and abundance of chlorite is evident in the rock record of exhumed subduction zone terranes. Talc formation during Si-metasomatism may thus play a more limited role in volatile cycling, strain localization, and in controlling the decoupling-coupling transition of the plate interface. Conversely, the observed and predicted ubiquity of chlorite corroborates its prominent role in slab-mantle interface processes that previous studies attributed to talc.
Key Points:
Limited talc formation by Si-metasomatism of ultramafic rocks in subduction zones
Chlorite formation is likely pervasive at the slab-mantle interface
Preferential formation of chlorite has wide-ranging chemical and physical implications for subduction zone processes
Plain Language Summary: In subduction zones, talc can form during chemical reactions of mantle rocks with silica-enriched fluids at the interface between descending oceanic plates and the overriding mantle. Its formation and distribution in subduction zones are believed to affect the volatile budget, rheological properties, and the down-dip limit of the decoupling of the slab-mantle interface. Therefore, illuminating the conditions that facilitate talc formation at high pressure-temperature conditions is key in assessing its roles in fundamental subduction zone processes. Using thermodynamic reaction-path models, we show that the formation of talc at the slab-mantle interface is restricted to a limited set of environmental conditions, because its formation is highly sensitive to the compositions of the mantle rocks and reactant fluids. Contrary to common belief, talc is unlikely to form in high abundance in ultramafic rocks metasomatized by Si-rich slab-derived fluids. Rather, our models predict the ubiquitous formation of chlorite along with other silicate minerals during Si-metasomatism due to the competing effects from other dissolved components that favor their formation over talc. This study calls into question the importance of talc during Si-metasomatism in subduction zones but highlights the more predominant role of chlorite.
Fossil records of early solar irradiation and cosmolocation of the CAI factory: a reappraisal
(2021)
Calcium-aluminum–rich inclusions (CAIs) in meteorites carry crucial information about the environmental conditions of the nascent Solar System prior to planet formation. Based on models of 50V–10Be co-production by in-situ irradiation, CAIs are considered to have formed within ~0.1 AU from the proto-Sun. Here, we present vanadium (V) and strontium (Sr) isotopic co-variations in fine- and coarse-grained CAIs and demonstrate that kinetic isotope effects during partial condensation and evaporation best explain V isotope anomalies previously attributed to solar particle irradiation. We also report initial excesses of 10Be and argue that CV CAIs possess essentially a homogeneous level of 10Be, inherited during their formation. Based on numerical modeling of 50V–10Be co-production by irradiation, we show that CAI formation during protoplanetary disk build-up likely occurred at greater heliocentric distances than previously considered, up to planet-forming regions (~1AU), where solar particle fluxes were sufficiently low to avoid substantial in-situ irradiation of CAIs.
Chloritoid and kyanite coexist in metapelites from the high-pressure/low-temperature Massa Unit in the Alpi Apuane metamorphic complex (Northern Apennines, Italy). The composition of chloritoid is extremely variable throughout the Massa Unit. Fe-chloritoid occurs in association with hematite-free, graphite-bearing schists, whereas strongly zoned Fe-Mg chloritoid is found with hematite and kyanite. We investigated the effect of different bulk Fe2O3 contents in controlling chloritoid composition through phase equilibria modelling of four selected samples, representative of the different chloritoid-bearing parageneses found in the Massa Unit. The ferric iron content, measured through wet chemical titration, ranges from 0 (graphite-chloritoid schist) to 73% of the total iron (hematite-chloritoid schist). We show that Mg-rich chloritoid compositions and stability of kyanite at greenschist to blueschist facies conditions can be reproduced in the MnO–Na2O–K2O–FeO–MgO–Al2O3–SiO2–H2O–TiO2–O (MnNKFMASHTO) chemical system only considering the presence of significant amounts of ferric iron as part of the bulk composition. The stabilization of kyanite at lower grade is directly linked to the presence of Fe2O3, which renders the reactive bulk rock composition effectively enriched in Al2O3 with respect to Fe and Mg. We also document that high Fe2O3 contents exacerbate the effect of chloritoid fractionation, producing strongly zoned Fe-Mg-chloritoid grains. Finally, the P–T modelling of the Massa Units performed in this study allows, for the first time, the recognition of a two-stage evolution at peak conditions, with an earlier pressure peak (1.2–1.3 GPa at 350–400°C), and a later thermal peak (0.7–1.1 GPa at 440–480°C), compatible with subduction, underthrusting and exhumation of the Adria continental margin during growth of the Northern Apennine orogenic wedge.
In subduction zones, sediments and hydrothermally altered oceanic crust, which together form part of the subducting slab, contribute to the chemical composition of lavas erupted at the surface to form volcanic arcs. Transport of this material from the slab to the overlying mantle wedge is thought to involve discreet melts and fluids that are released from various portions of the slab. We use a meta-analysis of geochemical data from eight globally representative arcs to show that melts and fluids from individual slab components cannot be responsible for the formation of arc lavas. Instead, the data are compatible with models that first invoke physical mixing of slab components and the mantle wedge, widely referred to as high-pressure mélange, before arc magmas are generated.
Nontarget screening exhibits a seasonal cycle of PM2.5 organic aerosol composition in Beijing
(2022)
The molecular composition of atmospheric particulate matter (PM) in the urban environment is complex, and it remains a challenge to identify its sources and formation pathways. Here, we report the seasonal variation of the molecular composition of organic aerosols (OA), based on 172 PM2.5 filter samples collected in Beijing, China, from February 2018 to March 2019. We applied a hierarchical cluster analysis (HCA) on a large nontarget-screening data set and found a strong seasonal difference in the OA chemical composition. Molecular fingerprints of the major compound clusters exhibit a unique molecular pattern in the Van Krevelen-space. We found that summer OA in Beijing features a higher degree of oxidation and a higher proportion of organosulfates (OSs) in comparison to OA during wintertime, which exhibits a high contribution from (nitro-)aromatic compounds. OSs appeared with a high intensity in summer-haze conditions, indicating the importance of anthropogenic enhancement of secondary OA in summer Beijing. Furthermore, we quantified the contribution of the four main compound clusters to total OA using surrogate standards. With this approach, we are able to explain a small fraction of the OA (∼11–14%) monitored by the Time-of-Flight Aerosol Chemical Speciation Monitor (ToF-ACSM). However, we observe a strong correlation between the sum of the quantified clusters and OA measured by the ToF-ACSM, indicating that the identified clusters represent the major variability of OA seasonal cycles. This study highlights the potential of using nontarget screening in combination with HCA for gaining a better understanding of the molecular composition and the origin of OA in the urban environment.
Central Europe was affected by a compressional tectonic event in the Late Cretaceous, caused by the convergence of Iberia and Europe. Basement uplifts, inverted graben structures and newly formed marginal troughs are the main expressions of crustal shortening. Although the maximum activity occurred in a short period between 90 and 75 Ma, the exact timing of this event is still unclear. Dating of start and end of basin inversion is very different depending on the applied method. On the basis of borehole data, facies and thickness maps, the timing of basin re-organisation was reconstructed for several basins in Central Europe. The obtained data point to a synchronous start of basin inversion already at 95 Ma (Cenomanian), 5 Million years earlier than commonly assumed. The end of the Late Cretaceous compressional event is more difficult to pinpoint, because regional uplift and salt migration disturb the signal of shifting marginal troughs. Unconformities of Late Campanian to Paleogene age on inverted structures indicate slowly declining uplift rates.
Teleconnections of the Quasi-Biennial Oscillation in a multi-model ensemble of QBO-resolving models
(2021)
The Quasi-biennial Oscillation (QBO) dominates the interannual variability of the tropical stratosphere and influences other regions of the atmosphere. The high predictability of the QBO implies that its teleconnections could lead to increased skill of seasonal and decadal forecasts provided the relevant mechanisms are accurately represented in models. Here modelling and sampling uncertainties of QBO teleconnections are examined using a multi-model ensemble of QBO-resolving atmospheric general circulation models that have carried out a set of coordinated experiments as part of the Stratosphere-troposphere Processes And their Role in Climate (SPARC) QBO initiative (QBOi). During Northern Hemisphere winter, the stratospheric polar vortex in most of these models strengthens when the QBO near 50 hPa is westerly and weakens when it is easterly, consistent with, but weaker than, the observed response. These weak responses are likely due to model errors, such as systematically weak QBO amplitudes near 50 hPa, affecting the teleconnection. The teleconnection to the North Atlantic Oscillation is less well captured overall, but of similar strength to the observed signal in the few models that do show it. The models do not show clear evidence of a QBO teleconnection to the Northern Hemisphere Pacific-sector subtropical jet.
Measurement of iodine species and sulfuric acid using bromide chemical ionization mass spectrometers
(2021)
Iodine species are important in the marine atmosphere for oxidation and new-particle formation. Understanding iodine chemistry and iodine new-particle formation requires high time resolution, high sensitivity, and simultaneous measurements of many iodine species. Here, we describe the application of a bromide chemical ionization mass spectrometer (Br-CIMS) to this task. During the iodine oxidation experiments in the Cosmics Leaving OUtdoor Droplets (CLOUD) chamber, we have measured gas-phase iodine species and sulfuric acid using two Br-CIMS, one coupled to a Multi-scheme chemical IONization inlet (Br-MION-CIMS) and the other to a Filter Inlet for Gasses and AEROsols inlet (Br-FIGAERO-CIMS). From offline calibrations and intercomparisons with other instruments, we have quantified the sensitivities of the Br-MION-CIMS to HOI, I2, and H2SO4 and obtained detection limits of 5.8 × 106, 3.8 × 105, and 2.0 × 105 molec. cm−3, respectively, for a 2 min integration time. From binding energy calculations, we estimate the detection limit for HIO3 to be 1.2 × 105 molec. cm−3, based on an assumption of maximum sensitivity. Detection limits in the Br-FIGAERO-CIMS are around 1 order of magnitude higher than those in the Br-MION-CIMS; for example, the detection limits for HOI and HIO3 are 3.3 × 107 and 5.1 × 106 molec. cm−3, respectively. Our comparisons of the performance of the MION inlet and the FIGAERO inlet show that bromide chemical ionization mass spectrometers using either atmospheric pressure or reduced pressure interfaces are well-matched to measuring iodine species and sulfuric acid in marine environments.
By means of available ice nucleating particle (INP) parameterization schemes we compute profiles of dust INP number concentration utilizing Polly-XT and CALIPSO lidar observations during the INUIT-BACCHUS-ACTRIS 2016 campaign. The polarization-lidar photometer networking (POLIPHON) method is used to separate dust and non-dust aerosol backscatter, extinction, mass concentration, particle number concentration (for particles with radius > 250 nm) and surface area concentration. The INP final products are compared with aerosol samples collected from unmanned aircraft systems (UAS) and analyzed using the ice nucleus counter FRIDGE.
Two types of particles exist in the atmosphere, primary and secondary particles. While primary particles such as soot, mineral dust, sea salt particles or pollen are introduced directly as particles into the atmosphere, secondary particles are formed in the atmosphere by condensation of gases. The formation of such new aerosol particles takes place frequently and at a broad variety of atmospheric conditions and geographic locations. A considerable fraction of the atmospheric particles is formed by such nucleation processes. The newly formed particles may grow by condensation to sizes where they are large enough to act as cloud condensation nuclei and therefore may affect cloud properties. The fundamental processes of aerosol nucleation are described and typical atmospheric observations are discussed. Two recent studies are introduced that potentially change our current understanding of atmospheric nucleation substantially.
Central and western Europe were affected by a compressional tectonic event in the Late Cretaceous, caused by the convergence of Iberia and Europe. Basement uplifts, inverted graben structures, and newly formed marginal troughs are the main expressions of crustal shortening. Although the maximum activity occurred during a short period of time between 90 and 75 Ma, the exact timing of this event is still unclear. Dating of the start and end of Late Cretaceous basin inversion gives very different results depending on the method applied. On the basis of borehole data, facies, and thickness maps, the timing of basin reorganization was reconstructed for several basins in central Europe. The obtained data point to a synchronous start of basin inversion at 95 Ma (Cenomanian), 5 Myr earlier than commonly assumed. The end of the Late Cretaceous compressional event is difficult to pinpoint in central Europe, because regional uplift and salt migration disturb the signal of shifting marginal troughs. Late Campanian to Paleogene strata deposited unconformably on inverted structures indicate slowly declining uplift rates during the latest Cretaceous. The differentiation of separate Paleogene inversion phases in central Europe does not appear possible at present.
We combined biostratigraphical analyses, archaeological surveys, and Glacial Isostatic Adjustment (GIA) models to provide new insights into the relative sea-level evolution in the northeastern Aegean Sea (eastern Mediterranean). In this area, characterized by a very complex tectonic pattern, we produced a new typology of sea-level index point, based on the foraminiferal associations found in transgressive marine facies. Our results agree with the sea-level history previously produced in this region, therefore confirming the validity of this new type of index point. The expanded dataset presented in this paper further demonstrates a continuous Holocene RSL rise in this portion of the Aegean Sea. Comparing the new RSL record with the available geophysical predictions of sea-level evolution indicates that the crustal subsidence of the Samothraki Plateau and the North Aegean Trough played a major role in controlling millennial-scale sea-level evolution in the area. This major subsidence rate needs to be taken into account in the preparation of local future scenarios of sea-level rise in the coming decades.
In partially molten regions inside the Earth, melt buoyancy may trigger upwelling of both solid and fluid phases, i.e., diapirism. If the melt is allowed to move separately with respect to the matrix, melt perturbations may evolve into solitary porosity waves. While diapirs may form on a wide range of scales, porosity waves are restricted to sizes of a few times the compaction length. Thus, the size of a partially molten perturbation in terms of compaction length controls whether material is dominantly transported by porosity waves or by diapirism. We study the transition from diapiric rise to solitary porosity waves by solving the two-phase flow equations of conservation of mass and momentum in 2D with porosity-dependent matrix viscosity. We systematically vary the initial size of a porosity perturbation from 1.8 to 120 times the compaction length. If the perturbation is of the order of a few compaction lengths, a single solitary wave will emerge, either with a positive or negative vertical matrix flux. If melt is not allowed to move separately to the matrix a diapir will emerge. In between these end members we observe a regime where the partially molten perturbation will split up into numerous solitary waves, whose phase velocity is so low compared to the Stokes velocity that the whole swarm of waves will ascend jointly as a diapir, just slowly elongating due to a higher amplitude main solitary wave. Only if the melt is not allowed to move separately to the matrix will no solitary waves build up, but as soon as two-phase flow is enabled solitary waves will eventually emerge. The required time to build them up increases nonlinearly with the perturbation radius in terms of compaction length and might be too long to allow for them in nature in many cases.
Analysing the composition of ambient ultrafine particles (UFP) is a challenging task due to the low mass and chemical complexity of small particles, yet it is a prerequisite for the identification ofparticle sources and the assessment of potential health risks. Here, we show the molecular characterization of UFP, based on cascade impactor (Nano-MOUDI) 10samples that were collected at an air quality monitoring station nearby one of Europe`s largest airports in Frankfurt, Germany. At this station, particle-size-distribution measurements show enhanced number concentration of particles smaller than 50nm during airport operating hours. We sampled the lower UFP fraction (0.010-0.018 μm; 0.018-0.032 μm; 0.032-0.056 μm) when the air masses arrived from the airport. We developed an optimized filter extraction procedure, used ultra-high performance liquid chromatography (UHPLC) for compound separation, and a heated electrospray ionization (HESI) source with an 15Orbitrap high-resolution mass spectrometer (HRMS) as a detector for organic compounds. A non-target screening detected ~200 organic compounds in the UFP fraction with sample-to-blank ratios larger than five. We identified the largest signals as homologous series of pentaerythritol esters (PEE) and trimethylolpropane esters (TMPE), which are base stocks of aircraft lubrication oils. We unambiguously attribute the majority of detected compounds to jet engine lubrication oils by matching retention times, high-resolution/accurate mass (HR/AM) measurements, and comparing MS/MS fragmentation patterns between both ambient samples and commercially available jet oils. For each UFP stage, we created molecular fingerprints to visualize the complex chemical composition ofthe organic fraction and their average carbon oxidation state. These graphs underline the presence of the homologous series of PEE and TMPE, and the appearance of jet oil additives (e.g. tricresyl phosphate (TCP)). Targeted screening on TCP confirmed the absence of the harmful tri-orthoisomer, while we identified a thermal transformation product of TMPE-based lubrication oil (trimethylolpropane phosphate (TMP-P)). Even though a quantitative determination of the identified compounds is limited, the presented method enables the qualitative detection of molecular markers for jet engine lubricants in UFP and thus strongly improves the source apportionment of UFP near airports.
Extensive black shale deposits formed in the Early Cretaceous South Atlantic, supporting the notion that this emerging ocean basin was a globally important site of organic carbon burial. The magnitude of organic carbon burial in marine basins is known to be controlled by various tectonic, oceanographic, hydrological, and climatic processes acting on different temporal and spatial scales, the nature and relative importance of which are poorly understood for the young South Atlantic. Here we present new bulk and molecular geochemical data from an Aptian–Albian sediment record recovered from the deep Cape Basin at Deep Sea Drilling Project (DSDP) Site 361, which we combine with general circulation model results to identify driving mechanisms of organic carbon burial. A multi-million year decrease (i.e. Early Aptian–Albian) in organic carbon burial, reflected in a lithological succession of black shale, gray shale, and red beds, was caused by increasing bottom water oxygenation due to abating tectonic restriction via South Atlantic-Southern Ocean gateways. These results emphasize basin evolution and ocean gateway development as a decisive primary control on enhanced organic carbon preservation in the Cape Basin at geological time scales (>1 Myr). The Early Aptian black shale sequence comprises alternations of shales with high (>5%) and relatively low (~3%) organic carbon content of marine sources, the former being deposited during the global Oceanic Anoxic Event (OAE) 1a, as well as during repetitive events before and after OAE 1a. In all cases, these short-term events of enhanced organic carbon burial coincided with strong influxes of sediments derived from the proximal African continent, indicating closely coupled climate–land–ocean interactions. Supported by our model results, we propose that fluctuations in weathering-derived nutrient input from the southern African continent, linked to fluctuations in pCO2 and/or orbitally driven humidity/aridity, were the underlying drivers of short-term organic carbon burial in the deep Cape Basin. These results suggest that deep marine environments of emerging ocean basins responded sensitively and directly to short term fluctuations in riverine nutrient fluxes. We explain this relationship by the lack of wide and mature continental shelf seas that could have acted as a barrier or filter for nutrient transfer from the continent into the deep ocean.
Extensive black shale deposits formed in the Early Cretaceous South Atlantic, supporting the notion that this emerging ocean basin was a globally important site of organic carbon burial. The magnitude of organic carbon burial in marine basins is known to be controlled by various tectonic, oceanographic, hydrological, and climatic processes acting on different temporal and spatial scales, the nature and relative importance of which are poorly understood for the young South Atlantic. Here we present new bulk and molecular geochemical data from an Aptian–Albian sediment record recovered from the deep Cape Basin at Deep Sea Drilling Project (DSDP) Site 361, which we combine with general circulation model results to identify driving mechanisms of organic carbon burial. A multimillion-year decrease (i.e., Early Aptian–Albian) in organic carbon burial, reflected in a lithological succession of black shale, gray shale, and red beds, was caused by increasing bottom water oxygenation due to abating hydrographic restriction via South Atlantic–Southern Ocean gateways. These results emphasize basin evolution and ocean gateway development as a decisive primary control on enhanced organic carbon preservation in the Cape Basin at geological timescales (> 1 Myr). The Early Aptian black shale sequence comprises alternations of shales with high (> 6 %) and relatively low (∼ 3.5 %) organic carbon content of marine sources, the former being deposited during the global Oceanic Anoxic Event (OAE) 1a, as well as during repetitive intervals before and after OAE 1a. In all cases, these short-term intervals of enhanced organic carbon burial coincided with strong influxes of sediments derived from the proximal African continent, indicating closely coupled climate–land–ocean interactions. Supported by our model results, we show that fluctuations in weathering-derived nutrient input from the southern African continent, linked to changes in orbitally driven humidity and aridity, were the underlying drivers of repetitive episodes of enhanced organic carbon burial in the deep Cape Basin. These results suggest that deep marine environments of emerging ocean basins responded sensitively and directly to short-term fluctuations in riverine nutrient fluxes. We explain this relationship using the lack of wide and mature continental shelf seas that could have acted as a barrier or filter for nutrient transfer from the continent into the deep ocean.
In the Central German Uplands, Fagus sylvatica and Picea abies have been particularly affected by climate change. With the establishment of beech forests about 3000 years ago and pure spruce stands 500 years ago, they might be regarded as ‘neophytes’ in the Hessian forests. Palaeoecological investigations at wetland sites in the low mountain ranges and intramontane basins point to an asynchronous vegetation evolution in a comparatively small but heterogenous region. On the other hand, palynological data prove that sustainably managed woodlands with high proportions of Tilia have been persisting for several millennia, before the spread of beech took place as a result of a cooler and wetter climate and changes in land management. In view of increasingly warmer and drier conditions, Tilia cordata appears especially qualified to be an important silvicultural constituent of the future, not only due to its tolerance towards drought, but also its resistance to browsing, and the ability to reproduce vegetatively. Forest managers should be encouraged to actively promote the return to more stress-tolerant lime-dominated woodlands, similar to those that existed in the Subboreal chronozone.
The ICON single-column mode
(2021)
The single-column mode (SCM) of the ICON (ICOsahedral Nonhydrostatic) modeling framework is presented. The primary purpose of the ICON SCM is to use it as a tool for research, model evaluation and development. Thanks to the simplified geometry of the ICON SCM, various aspects of the ICON model, in particular the model physics, can be studied in a well-controlled environment. Additionally, the ICON SCM has a reduced computational cost and a low data storage demand. The ICON SCM can be utilized for idealized cases—several well-established cases are already included—or for semi-realistic cases based on analyses or model forecasts. As the case setup is defined by a single NetCDF file, new cases can be prepared easily by the modification of this file. We demonstrate the usage of the ICON SCM for different idealized cases such as shallow convection, stratocumulus clouds, and radiative transfer. Additionally, the ICON SCM is tested for a semi-realistic case together with an equivalent three-dimensional setup and the large eddy simulation mode of ICON. Such consistent comparisons across the hierarchy of ICON configurations are very helpful for model development. The ICON SCM will be implemented into the operational ICON model and will serve as an additional tool for advancing the development of the ICON model.
Role of the tropical atlantic for the interhemispheric heat transport during the last deglaciation
(2021)
Abstract
During the last deglaciation abrupt millennial-scale perturbations of the Atlantic Meridional Overturning Circulation massively altered the interhemispheric heat distribution affecting, for example, continental ice volume and hydroclimate. If and how the related cross-equatorial heat transport was controlled by the interplay between the southward-flowing Brazil Current (BC) and northward-flowing North Brazil Current (NBC) remains controversial. To assess the role of tropical heat transport during the last deglaciation, we obtained a high-resolution foraminiferal Mg/Ca-based sea surface temperature (SST) record from the BC domain at 21.5°S. The data reveal a yet undocumented warming of at least 4.6°C of the BC during Heinrich Stadial 1 at ∼16 ka indicating massive oceanic heat accumulation in the tropical South Atlantic. Simultaneously, a strongly diminished NBC prevented the release of this excess heat into the northern tropics. The observed magnitude of heat accumulation substantially exceeds numerical model simulations, stressing the need to further scrutinize atmospheric and oceanic heat transport during extreme climatic events.
Plain Language Summary
The Atlantic overturning circulation underwent abrupt millennial-scale perturbations. Such phases of sluggish oceanic circulation resulted in a substantial reduction of northward heat transport. As a consequence, substantial cooling occurred in the Northern Hemisphere and warming occurred in the Southern Hemisphere with severe effects on tropical precipitation. The distribution of heat within the western tropical Atlantic is accomplished by the southward-flowing BC and the northward-flowing NBC. By reconstructing SSTs for the interval between 20,000 and 10,000 yr before present, we assess the role of both currents in the interhemispheric heat transport during weak Atlantic overturning. We found that a sluggish overturning circulation resulted in anomalous southward heat transport by the BC in concert with a weak NBC, which lead to a yet undocumented warming of at least 4.6°C in the western tropical South Atlantic. This warming significantly exceeds reconstructions based on numerical simulations. This points to the need to further improve our understanding of changes in the cross-equatorial oceanic and atmospheric heat transport in response to rapid changes in ocean circulation, in particular as a significant weakening of the Atlantic overturning circulation is predicted in the wake of anthropogenic climate change.
Production and use of many synthetic halogenated trace gases are regulated internationally due to their contribution to stratospheric ozone depletion or climate change. In many applications they have been replaced by shorter-lived compounds, which have become measurable in the atmosphere as emissions increased. Non-target monitoring of trace gases rather than targeted measurements of well-known substances is needed to keep up with such changes in the atmospheric composition. We regularly deploy gas chromatography (GC) coupled to time-of-flight mass spectrometry (TOF-MS) for analysis of flask air samples and in situ measurements at the Taunus Observatory, a site in central Germany. TOF-MS acquires data over a continuous mass range that enables a retrospective analysis of the dataset, which can be considered a type of digital air archive. This archive can be used if new substances come into use and their mass spectrometric fingerprint is identified. However, quantifying new replacement halocarbons can be challenging, as mole fractions are generally low, requiring high measurement precision and low detection limits. In addition, calibration can be demanding, as calibration gases may not contain sufficiently high amounts of newly measured substances or the amounts in the calibration gas may have not been quantified. This paper presents an indirect data evaluation approach for TOF-MS data, where the calibration is linked to another compound which could be quantified in the calibration gas. We also present an approach to evaluate the quality of the indirect calibration method, select periods of stable instrument performance and determine well suited reference compounds. The method is applied to three short-lived synthetic halocarbons: HFO-1234yf, HFO-1234ze(E), and HCFO-1233zd(E). They represent replacements for longer-lived hydrofluorocarbons (HFCs) and exhibit increasing mole fractions in the atmosphere.
The indirectly calibrated results are compared to directly calibrated measurements using data from TOF-MS canister sample analysis and TOF-MS in situ measurements, which are available for some periods of our dataset. The application of the indirect calibration method on several test cases can result in uncertainties of around 6 % to 11 %. For hydro(chloro-)fluoroolefines (denoted H(C)FOs), uncertainties up to 23 % are achieved. The indirectly calculated mole fractions of the investigated H(C)FOs at Taunus Observatory range between measured mole fractions at urban Dübendorf and Jungfraujoch stations in Switzerland.
Abstract
The mineralogy, chemical composition, and physical properties of cratonic mantle eclogites with oceanic crustal protoliths can be modified by secondary processes involving interaction with fluids and melts, generated in various slab lithologies upon subduction (auto‐metasomatism) or mantle metasomatism after emplacement into the cratonic lithosphere. Here we combine new and published data to isolate these signatures and evaluate their effects on the chemical and physical properties of eclogite. Mantle metasomatism involving kimberlite‐like, ultramafic carbonated melts (UM carbonated melts) is ubiquitous though not pervasive, and affected between ~20% and 40% of the eclogite population at the various localities investigated here, predominantly at ~60–150 km depth, overlapping cratonic midlithospheric seismic discontinuities. Its hallmarks include lower jadeite component in clinopyroxene and grossular component in garnet, an increase in bulk‐rock MgO ± SiO2, and decrease in FeO and Al2O3 contents, and LREE‐enrichment accompanied by higher Sr, Pb, Th, U, and in part Zr and Nb, as well as lower Li, Cu ± Zn. This is mediated by addition of a high‐temperature pyroxene from a UM carbonated melt, followed by redistribution of this component into garnet and clinopyroxene. As clinopyroxene‐garnet trace‐element distribution coefficients increase with decreasing garnet grossular component, clinopyroxene is the main carrier of the metasomatic signatures. UM carbonated melt‐metasomatism at >130–150 km has destroyed the diamond inventory at some localities. These mineralogical and chemical changes contribute to low densities, with implications for eclogite gravitational stability, but negligible changes in shear‐wave velocities, and, if accompanied by H2O‐enrichment, will enhance electrical conductivities compared to unenriched eclogites.
Plain Language Summary
Oceanic crust formed at spreading ridges is recycled in subduction zones and undergoes metamorphism to eclogite. Some of this material is captured in the overlying lithospheric mantle, where it is exhumed by passing magmas. Having formed in spreading ridges, these eclogites have proven invaluable archives for the onset of plate tectonics, for the construction of cratons during subduction/collision, as probes of the convecting mantle from which their precursors formed, and as generators of heterogeneity upon recycling into Earth's convecting mantle. During subduction and until exhumation, interaction with fluids and melts (called metasomatism) can change the mineralogy, chemical composition, and physical properties of mantle eclogites, complicating their interpretation, but a comprehensive study of these effects is lacking so far. We investigated mantle eclogites from ancient continents (cratons) around the globe in order to define hallmarks of metasomatism by subduction‐related fluids and small‐volume ultramafic carbonated mantle melts. We find that the latter is pervasive and occurs predominantly at midlithospheric depths where seismic discontinuities are detected, typically causing diamond destruction and a reduction in density. This has consequences for their gravitational stability and for the interpretation of shearwave velocities in cratons.
Constraining the architecture of complex 3D volcanic plumbing systems within active rifts, and their impact on rift processes, is critical for examining the interplay between faulting, magmatism and magmatic fluids in developing rift segments. The Natron basin of the East African Rift System provides an ideal location to study these processes, owing to its recent magmatic-tectonic activity and ongoing active carbonatite volcanism at Oldoinyo Lengai. Here, we report seismicity and fault plane solutions from a 10-month temporary seismic network spanning Oldoinyo Lengai, Naibor Soito volcanic field and Gelai volcano. We locate 6827 earthquakes with ML -0.85 to 3.6, which are related to previous and ongoing magmatic and volcanic activity in the region, as well as regional tectonic extension. We observe seismicity down to ~17 km depth north and south of Oldoinyo Lengai and shallow seismicity (3 - 10 km) beneath Gelai, including two swarms. The deepest seismicity (~down to 20 km) occurs above a previously imaged magma body below Naibor Soito. These seismicity patterns reveal a detailed image of a complex volcanic plumbing system, supporting potential lateral and vertical connections between shallow- and deep-seated magmas, where fluid and melt transport to the surface is facilitated by intrusion of dikes and sills. Focal mechanisms vary spatially. T-axis trends reveal dominantly WNW-ESE extension near Gelai, while strike-slip mechanisms and a radial trend in P-axes are observed in the vicinity of Oldoinyo Lengai. These data support local variations in the state of stress, resulting from a combination of volcanic edifice loading and magma-driven stress changes imposed on a regional extensional stress field. Our results indicate that the southern Natron basin is a segmented rift system, in which fluids preferentially percolate vertically and laterally in a region where strain transfers from a border fault to a developing magmatic rift segment.
The complete elastic stiffness tensor of thiourea has been determined from thermal diffuse scattering (TDS) using high-energy photons (100 keV). Comparison with earlier data confirms a very good agreement of the tensor coefficients. In contrast with established methods to obtain elastic stiffness coefficients (e.g. Brillouin spectroscopy, inelastic X-ray or neutron scattering, ultrasound spectroscopy), their determination from TDS is faster, does not require large samples or intricate sample preparation, and is applicable to opaque crystals. Using high-energy photons extends the applicability of the TDS-based approach to organic compounds which would suffer from radiation damage at lower photon energies.
Strain localization in the lithosphere and the formation, evolution, and maintenance of resulting plate boundaries play a crucial role in plate tectonics and thermo‐chemical mantle convection. Previously activated lithospheric deformation zones often appear to maintain a “memory” of weakening, leading to tectonic inheritance within plate reorganizations including the Wilson cycle. Different mechanisms have been proposed to explain such strain localization, but it remains unclear which operates on what spatio‐temporal scales, and how to best incorporate them in large‐scale mantle convection models. Here, we analyze two candidates, (1), grain‐size sensitive rheology and, (2), damage‐style parameterizations of yield, stress which are sometimes used to approximate the former. Grain‐size reduction due to dynamic recrystallization can drive localization in the ductile domain, and grain growth provides a time‐dependent rheological hardening component potentially enabling the preservation of rheological heterogeneities. We compare the dynamic weakening and hardening effects as well as the timescales of strength evolution for a composite rheology including grain‐size dynamics with a pseudo‐plastic rheology including damage‐ (or “strain”‐) dependent weakening. We explore the implications of different proposed grain‐size evolution laws, and test to which extent strain‐dependent rheologies can mimic the weakening and hardening effects of the more complex micro‐physical behavior. Such an analysis helps to better understand the parallels and differences between various strain‐localization modeling approaches used in different tectonics and geodynamics communities. More importantly, our results contribute to efforts to identify the key ingredients of strain‐localization and damage hysteresis within plate tectonics and how to represent those in planetary‐scale modeling.
During the first two days of August 2016 a seismic crisis occurred on Brava, Cabo Verde, which – according to observations based on a local seismic network – was characterized by more than a thousand volcano-seismic signals. Brava is considered an active volcanic island, although it has not experienced any historic eruptions. Seismicity significantly exceeded the usual level during the crisis. We report on results based on data from a temporary seismic-array deployment on the neighbouring island of Fogo at a distance of about 35 km. The array was in operation from October 2015 to December 2016 and recorded a total of 1343 earthquakes in the region of Fogo and Brava; 355 thereof were localized. On 1 and 2 August we observed 54 earthquakes, 25 of which could be located beneath Brava. We further evaluate the observations with regards to possible precursors to the crisis and its continuation. Our analysis shows a significant variation in seismicity around Brava, but no distinct precursory pattern. However, the observations suggest that similar earthquake swarms commonly occur close to Brava. The results further confirm the advantages of seismic arrays as tools for the remote monitoring of regions with limited station coverage or access.
Rodrigues Ridge connects the Réunion hotspot track with the Central Indian Ridge (CIR) and has been suggested to represent the surface expression of a sub-lithospheric flow channel. From global earthquake catalogues, the seismicity in the region has been associated mainly with events related to the fracture zones at the CIR. However, some segments of the CIR appear void of seismic events. Here, we report on the seismicity recorded at a temporary array of 10 seismic stations operating on Rodrigues Island from September 2014 to June 2016. The array analysis was performed in the time domain by time shifting and stacking the complete waveforms. Event distances were estimated based on a 1-D velocity model and the travel time differences between S and P wave arrivals. We detected and located 63 new events that were not reported by the global networks. Most of the events (51) are located off the CIR and can be classified as intraplate earthquakes. Local magnitudes varied between 1.6 and 3.7. Four seismic clusters were observed that occurred to the west of the spreading segment of the CIR. The Rodrigues Ridge appeared to be aseismic during the period of operation. The lack of seismic activity along both Rodrigues Ridge and the sections of the CIR to the east of Rodrigues may be explained by partially molten upper-mantle material, possibly in relation to the proposed material flow between the Réunion plume and the CIR.
Tetra-auricupride, ideally AuCu, represents the only species showing the coexistence of Au with an elevated level of Pt, as in the case of a detrital grain studied structurally for the first time, from an ophiolite-associated placer at Bolshoy Khailyk, western Sayans, Russia. We infer that tetra-auricupride can incorporate as much as ~30 mol. % of a “PtCu” component, apparently without significant modification of the unit cell. The unit-cell parameters of platiniferous tetra-auricupride are: a 2.790(1) Å, c 3.641(4) Å, with c/a = 1.305, which are close to those reported for ordered AuCu(I) in the system Au–Cu, and close also to the cell parameters of tetraferroplatinum (PtFe), which both appear to crystallize in the same space group, P4/mmm. These intermetallic compounds and natural alloys are thus isostructural. The closeness of their structures presumably allows Pt to replace Au atoms so readily. The high extent of Cu + Au enrichment is considered to be a reflection of geochemical evolution and buildup in levels of the incompatible Cu and Au with subordinate Pt in a remaining volume of melt at low levels of fO2 and fS2 in the system.