Refine
Year of publication
Document Type
- Doctoral Thesis (593) (remove)
Has Fulltext
- yes (593)
Is part of the Bibliography
- no (593) (remove)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (593) (remove)
In this work the preparation of organic donor-acceptor thin films was studied. A chamber for organic molecular beam deposition was designed and integrated into an existing deposition system for metallic thin films. Furthermore, the deposition system was extended by a load-lock with integrated bake-out function, a chamber for the deposition of metallic contacts via stencil mask technique and a sputtering chamber. For the sublimation of the organic compounds several effusion cells were designed. The evaporation characteristic and the temperature profile within the cells was studied. Additionally, a simulation program was developed, which calculates the evaporation characteristics of different cell types. The following processes were integrated: evaporation of particles, migration on the cell walls and collisions in the gas phase. It is also possible to consider a temperature gradient within the cell. All processes can be studied separately and their relative strength can be varied. To verify the simulation results several evaporation experiments with different cell types were employed. The thickness profile of the prepared thin films was measured position-dependently. The results are in good agreement with the simulation. Furthermore, the simulation program was extended to the field of electron beam induced deposition (EBID). The second part of this work deals with the preparation and characterization of organic thin films. The focus hereby lies on the charge transfer salt (BEDT-TTF)(TCNQ), which has three known structure variants. Thin films were prepared by different methods of co-evaporation and were studied with optical microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy (EDX).The formation of the monoclinic phase of (BEDT-TTF)(TCNQ) could be shown. As a last part tunnel structures were prepared as first thin film devices and measured in a He4 cryostat.
This work deals with the use of dielectrics with high permeability, so-called high-k dielectrics in organic thin-film field-effect transistors (FETs). The central part was the preparation of the high-k dielectric and its implementation in transistors, in which organic semiconductors were used as active layer. A field-effect transistor can be used to measure the charge carrier mobility. Employing high-k dielectrics the carrier concentration in the active layer can be greatly increased. In this way, high charge carrier concentrations in organic layers can be achieved without chemical doping. As high-k dielectric strontium titanate (STO) was selected. It is also available as a niobium-doped and therefore conducting substrate material. Thus, one has an ideal substrate for the growth of the dielectric layer in conjunction with a substrate which acts as gate electrode. As the organic semiconductor the small molecules pentacene and copper phthalocyanine (CuPc) were sublimated, as electrical contacts gold was used. As a key part of this work an ultra high vacuum chamber system was constructed for in situ preparation of field effect transistors. For the deposition of the organic thin films a molecular beam deposition chamber was built, including a manipulator and effusion cells as evaporation sources. For the preparation of the dielectric a sputtering chamber was set-up. Another chamber was used in conjunction with an effusion cell for the deposition of the gold contacts. For the structured deposition of the different layers in the devices a shadow mask system was implemented. Movable masks could be positioned by means of a wobble stick onto the sample carriers. The system thus allowed for the use of masks in all chambers. The different thin films required in the transistor structure were first individually prepared and characterized. For the characterization primarily X-ray diffraction and optical microscopy were used. The growth of pentacene was analyzed on aplha-AlO substrates. With X-ray diffraction the (00l) reflections of the thin film phase were observed. In growth studies of CuPc aplha-AlO and STO substrates were used. With X-ray diffraction the aplha-phase was detected. With increasing substrate temperature an increase in crystallinity, but also an increase in surface roughness was observed. The sputtering of STO as a high-k dielectric was studied and optimized. Simultaneously, a high deposition rate, a smooth film surface and good crystallinity of the layer were required. As the most important parameters the substrate temperature, pressure and sputtering power were identified. Argon and oxygen were employed as sputtering gases, as substrate MgO was used. The films showed in comparison to crystalline STO a distortion to larger lattice constants. The degree of distortion decreased with increasing chamber pressure, on the other hand, deposition rate decreased with increasing chamber pressure as well. By combining the individual deposition processes FETs in bottom-gate geometry were prepared. The first step was always sputtering of the STO dielectric on niobium-doped STO substrates. Subsequently, the electrodes and the organic layer were deposited. For comparison transistors on silicon substrates with silicon dioxide (SiO2) as the dielectric were prepared. To study the transistor properties a measurement setup was build. A dielectric constant of about 190 for the STO in the transistors was achieved. The transistors with CuPc as active layer showed p-type conduction behavior. The transistors with STO as dielectric had a much stronger response than those with SiO2. They reached mobilities of 2E-4 cm2/Vs at very low applied voltages of 3V. It could thus be demonstrated that STO is suitable as a dielectric for organic FETs, and that through the use of high-k dielectrics high charge carrier densities can be achieved.
Next-generation DIRC detectors, like the PANDA Barrel DIRC, with improved optical designs and better spatial and timing resolution, require correspondingly advanced reconstruction and PID methods. The investigation of the PID performance of two DIRC counters and the evaluation of the reconstruction and PID algorithms form the core of this thesis. Several reconstruction and PID approaches were developed, optimized, and tested using hadronic beam particles, experimental physics events, and Geant simulations. The near-final design of the PANDA Barrel DIRC was evaluated with a prototype in the T9 beamline at CERN in 2018. The analysis finds excellent agreement between the experimental data and the Geant simulations for all reconstruction algorithms. The best PID performance of up to $5.2 \pm 0.2$ s.d. $\pi$/K separation at 3.5 GeV/c, was obtained with a time imaging PID method. The PANDA Barrel DIRC simulation, as well as the reconstruction and PID algorithms, were evaluated using experimental data from the GlueX DIRC as part of the FAIR Phase-0 program. The performance validation was carried out using physics events of the GlueX experiment and simulations. The initial analysis results of the commissioning dataset show a $\pi$/K separation power of up to 3 s.d. at a momentum of 3.0-3.5 GeV/c, obtained using a geometric reconstruction algorithm.
Conclusion Scale Integration Based on the results of spike-field coherence, the underlying process of shortterm memory seems to involve networks of different sizes within and, most probably, beyond prefrontal cortex. Spikes, which were generated by single neurons, cooperate with local field potentials, which were the slower fluctuations of the environment. Although differences among behavioral conditions appear to be based on rather few instances of phase-locked spikes, the task-related effects on spike-field coherence are highly reliable and cannot be explained by chance, as the comparison of results from experimental and simulated data shows. The differential locking of prefrontal neuron populations with two different frequency bands in their input signals suggests that neuronal activity underlying short-term memory in prefrontal cortex transiently engages cortical circuits on different spatial scales, probably in order to coordinate distributed processes. NeuroXidence method and Synchronizedfiring Based on the results of the calibration datasets, for bi- and multi-variate cases, the extension of NeuroXidence remains its sensitivity and reliability of detecting coordinate firing events for different processes. Based on this extension of NeuroXidence, we demonstrated that in monkey’s prefrontal cortex during short-term memory task, encoding and maintenance of the information rely on the formation of neuronal assemblies characterized by precise and reliable synchronization of spiking activity on a millisecond time scale, which is consistent with the results from spike-spike coherence. The task and performance dependent modulation of synchrony reflects the dynamic formation of group of neurons has large effect on short-term-memory.
Nanocarbon structures, such as fullerenes and nanotubes, have generated considerable interest and research, due to their unique properties and potential applications. In this thesis, we present a study of the phase transition properties of nanocarbon clusters,in particular, we pay special consideration to fullerenes. The work presented in this thesis is largely theoretical and computational in nature, employing as a tool, molecular dynamics simulations to probe the dynamic stability of fullerenes and associated nanocarbon structures such as graphenes and nanotubes.
In this work we investigate phenomenological aspects of an anisotropic quark-gluon plasma. In the first part of this thesis, we formulate phenomenologicalmodels that take into account the momentumspace anisotropy of the system developed during the expansion of the fireball at early-times. By including the proper-time dependence of the parton hard momentum scale, phard(), and the plasma anisotropy parameter, Xi, the proposed models allow us to interpolate from 0+1 pre-equilibrated expansion at early-times to 0+1 ideal hydrodynamics at late times. We study dilepton production as a valuable observable to experimentally determine the isotropization time of the system as well as the degree of anisotropy developed at early-times. We generalize our interpolating models to include the rapidity dependence of phard and consider its impact on forward dileptons. Next, we discuss how to constrain the onset of hydrodynamics by demanding two requirements of the solutions to the equations of motion of viscous hydrodynamics. We show this explicitly for 0+1 dimensional 2nd-order conformal viscous hydrodynamics and find that the initial conditions are non-trivially constrained. Finally, we demonstrate how to match the initial conditions for 0+1 dimensional viscous hydrodynamics from pre-equilibrated expansion. We analyze the dependence of the entropy production on the pre-equilibrium phase and discuss limitations of the standard definitions of the non-equilibrium entropy in kinetic theory.
Within this thesis, an experimental study of the photo double ionization (PDI) and the simultaneous ionization-excitation is performed for lithium in different initial states Li (1s22l) (l = s, p). The excess energy of the linearly polarized VUV-light is between 4 and 12 eV above the PDI-threshold. Three forefront technologies are combined: a magneto-optical trap (MOT) for lithium generating an ultra-cold and, by means of optical pumping, a state-prepared target; a reaction microscope (ReMi), enabling the momentum resolved detection of all reaction fragments with high-resolution and the free-electron laser in Hamburg (FLASH), providing an unprecedented brilliant photon beam at favourable time structure to access small cross sections. Close to threshold the total as well as differential PDI cross sections are observed to critically depend on the excitation level and the symmetry of the initial state. For the excited state Li (1s22p) the PDI dynamics strongly depends on the alignment of the 2p-orbital with respect to the VUV-light polarization and, thus, from the population of the magnetic substates (mp = 0, ±1). This alignment sensitivity decreases for increasing excess energy and is completely absent for ionization-excitation. Time-dependent close-coupling calculations are able to reproduce the experimental total cross sections with deviations of at most 30%. All the experimental observations can be consistently understood in terms of the long range electron correlation among the continuum electrons which gives rise to their preferential back-to-back emission. This alignment effect, which is observed here for the first time, allows controlling the PDI dynamics through a purely geometrical modification of the target initial state without changing its internal energy.
In der vorliegenden Arbeit wird die Photodoppelionisation (PDI) von Helium (He) experimentell untersucht. Dazu wurde an der Synchrotronstrahlenquelle Advanced Light Source des Lawrence Berkeley National Laboratory (USA) der vollständig differentielle Wirkungsquerschnitt (FDCS) der PDI von He mit linear sowie mit links und rechts zirkular polarisiertem Licht bei den zwei Photon-Energien E_gamma = 179 eV und 529 eV gemessen. Dabei gelang erstmals eine Messung, bei der die Kontinuumsenergie der Fragmente wesentlich über der Bindungsenergie (79 eV) des Systems liegt. Aufgrund dieser hohen Energie lassen die gemessenen Winkel- und Energieverteilungen erstmals Rückschlüsse auf die Wechselwirkungsprozesse in der Ionisation zu. In allen bisherigen Messungen bei niedrigen Photon-Energien überdeckt der Einfluß der Elektron-Elektron-Wechselwirkung im Endzustand alle Spuren der seit langem theoretisch diskutierten Reaktionsmechanismen. Der FDCS der PDI von He wurde mit einer COLTRIMS (COLd Target Recoil Ion Momentum Spectroscopy)-Apparatur gemessen. Hierbei wird das Gastarget durch eine adiabatische Expansion gekühlt und dann mit dem Photon-Strahl zum Überlapp gebracht. Die bei einer Reaktion freigesetzten Elektronen, deren Summenenergie sich zu E_sum = E_1 + E_2 = E_gamma - 79 eV berechnet (die Summenenergie der beiden Elektronen ist gleich der Überschußenergie E_exc), werden mit einer Energie bis zu E_1,2 = 60 eV durch ein elektrisches und magnetisches Feld im vollen Raumwinkel von 4 pi auf einem großen ortssensitiven Detektor abgebildet. Das elektrische Feld projiziert die kalten Rückstoßionen auf einen zweiten ortssensitiven Detektor. Aus der Flugzeit und dem Auftreffort werden der Ladungszustand und der Impuls der Teilchen ermittelt. Ergebnisse: Die Energieaufteilung auf die beiden Elektronen erfolgt asymmetrisch. Diese Asymmetrie ist bei der PDI 450 eV über der Doppelionisationsschwelle (79 eV) stärker ausgeprägt als bei E_exc = 100 eV. Langsame Elektronen werden generell isotrop zur Polarisation emittiert (beta = 0), während die 100 eV-Elektronen einen Anisotropie-Parameter von beta = 1,7 und die sehr schnellen 450 eV-Elektronen sogar eine Dipolverteilung (beta = 2) bzgl. der Polarisationsachse aufweisen. Eine asymmetrische Energieaufteilung zusammen mit einem Anisotropie-Parameter von beta = 2 für die 450 eV-Elektronen zeigt, daß bei der PDI 450 eV über der Schwelle ein Zwei-Stufen-Prozeß vorliegt, in dem das erste Elektron die Energie und den Drehimpuls des Photons aufnimmt. Das zweite Elektron gelangt dann durch den Shake-off oder den Two-Step-One-Mechanismus ins Kontinuum. Sowohl die Häufigkeitsverteilung der Zwischenwinkel der Elektronen als auch der Verlauf der Quadrate der geraden und der ungeraden Amplituden bei der PDI 450 eV über der Schwelle zeigen, daß sehr langsame Elektronen (2 eV) hauptsächlich durch den Shake-off-Mechanismus ins Kontinuum gelangen, während etwas schnellere 30 eV-Elektronen ihre Energie über einen (e,2e)-Stoß (Two-Step-One-Mechanismus) erhalten. Für 100 eV über der Schwelle zeigt sich, daß der Relativimpulsvektor der beiden Elektronen parallel zum Polarisationsvektor steht. Das bedeutet, daß die PDI von He 100 eV über der Schwelle nicht mehr im Gültigkeitsbereich der Wannier-Näherung liegt. Aufgrund der großen Geschwindigkeitsdifferenzen kann die PDI von Helium parallel zum Polarisationsvektor erfolgen. Der gegen den Zwischenwinkel varphi_12 der Elektronen aufgetragene normierte Zirkulare Dichroismus CD_n ist bei E_exc = 100 eV wesentlich stärker ausgeprägt als bei E_exc = 450 eV. Der Wert des Extremums ist für alle Energieaufteilungen - außer der symmetrischen - gleich. Für beide Überschußenergien findet man eine Abhängigkeit der varphi_12-Position des Extremums von der Energieaufteilung. Die Extreme entfernen sich mit zunehmender asymmetrischer Energieaufteilung von varphi_12=180°. Die experimentell gewonnenen Ergebnisse zu den vollständig differentiellen Wirkungsquerschnitten der PDI von He sowohl mit linear als auch mit links und rechts zirkular polarisiertem Licht bei 100 eV und 450 eV über der Doppelionisationsschwelle zeigen insgesamt gute Übereinstimmungen mit den Ergebnissen der convergent-close-coupling-Rechnungen von A. Kheifets und I. Bray.
Die vorliegende Arbeit bietet zunächst einen weiteren Beweis für die Existenz des neutralen Heliumdimers. Darüber hinaus konnten zwei verschiedene Prozesse identifiziert werden, über die die Absorbtion eines Photons zur Ionisation beider Atome des Dimers über sehr große Abstände führen kann. Oberhalb einer Photonenenergie von 65,4 eV konnte ein ICD Prozess beobachtet werden, der über Photoionisation mit gleichzeitiger Anregung von einem der beiden Atome realisiert wird. Bei 77,86 eV konnte ICD über elektronisch angeregte Zustände bis n=6 nachgewiesen werden. In der KER-Verteilung konnten zudem Strukturen gefunden werden, die auf Vibrationsanregungen im Zwischenzustand des Dimer-Ions schließen lassen. Eine vollständig quantenmechanische Rechnung von Sisourat et al. konnte dies schließlich hervorragend bestätigen. Es konnte also ein direkter Blick auf die Vibrationswellenfunktionen des Systems erlangt werden. In anderen Systemen ist dies in der Regel nicht möglich, da sich alle Zustände üblicherweise zu einer strukturlosen Verteilung überlagern. Weiterhin konnte gezeigt werden, dass sich die Winkelverteilungen von ICD- und Photoelektronen in verschiedenen Bereichen des KER mitunter stark voneinander unterscheiden. Dies konnte auf die unterschiedliche Besetzung von verschiedenen Potentialkurven zurückgeführt werden. Unterhalb der Photonenenergieschwelle zur Anregung und Ionisation eines Heliumatoms konnte ein weiterer, zweistufiger Ionisationsmechanismus gefunden werden. Hier wird zunächst durch Photoionisation ein Elektron aus einem der beiden Atome im Dimer freigesetzt. Dieses Photoelektron kann nun am neutralen Atom gestreut werden und dabei ausreichend viel Energie übertragen, um dieses ebenfalls zu ionisieren. Es konnte gezeigt werden, dass der Prozess einer Abhängigkeit von der Polarisation der Synchrotronstrahlung unterliegt, die man für Photoionisation erwarten würde. Die Energie- und Winkelverteilungen der Elektronen konnten daher mit vorangegangenen Elektronenstoß-Experimenten verglichen werden. Die gute Übereinstimmung mit diesen Daten rechtfertigt eine anschauliche Sichtweise des Prozesses als Analogon zum klassischen Billiard-Stoß. Der Two-Step-Prozess wurde bisher zwar schon in vielen Systemen als theoretisches Modell zur Doppelionisation beschrieben, allerdings konnten die einzelnen Unterprozesse bisher nicht gesondert gemessen werden. Die großen Abstände im Heliumdimer ermöglichen erstmals eine deutliche Trennung in Photoionisation an einem Atom und Elektronenstoß (e,2e) am Nachbaratom. Der Two-Step-Prozess konnte außerdem dazu verwendet werden, die ungewöhnliche Grundzustandswellenfunktion des Heliumdimers zu experimentell zu bestätigen. Eine Analyse des gemessenen KER konnte dabei deutliche Abweichungen zu einer klassischen Theorie aufzeigen. Erst eine vollständig quantenmechanische Rechnung des Übergangs von Sisourat et al. konnte die Messdaten beschreiben.
Im Rahmen dieser Dissertation wurde die Photophysik und die elektronische Struktur einer Klasse neuartiger Donator-Akzeptor-Ladungstransfer-Komplexe untersucht. Im Wesentlichen bestehen diese Verbindungen aus einem Ferrocen-Donator (Fc) und organischen Akzeptoren, die über B-N-Bindungen verbrückt sind, welche sich bei dieser Art von makromolekularen Systemen spontan bilden. Zentraler Gegenstand dieser Arbeit war die spektroskopische Untersuchung des Metall-zu-Ligand-Ladungstransfers (engl. Abkürzung: MLCT) im elektronischen Anregungszustand dieser kationischen Komplexverbindungen, die im Weiteren als „Fc-B-bpy“-Verbindungen bezeichnet werden. Die vorliegende Arbeit analysiert eine Vielzahl miteinander verwandter Fc-B-bpy-Derivate. Die Arbeit ist gegliedert in 1.) die Analyse der Absorptionsspektren vom UV- bis zum nahen Infrarot-Spektralbereich (250-1000 nm) von Lösungen, dotierten Polymer-Dünnfilmen und Einkristallen, 2.) die zeitaufgelöste optische Spektroskopie des angeregten Zustands auf der Pikosekunden-Zeitskala, 3.) die Analyse elektrochemischer Messungen an Lösungen, und 4.) die Auswertung quantenchemischer Berechnungen. Für die zeitaufgelösten Messungen wurde ein komplexes optisches Spektroskopie-System mit breitbandigen Femtosekunden-Pulsen sowie den entsprechenden zeitaufgelösten Detektionsmethoden (spektral gefilterte Weißlicht-Detektion) aufgebaut. Die Ergebnisse dieser Arbeit beweisen die Existenz eines MLCT-Übergangs mit fast vollständigem Übergang eines Fc-Donator-Elektrons zum B-bpy-Akzeptor bei optischer Anregung. Die vergleichenden Untersuchungen der spektroskopischen Eigenschaften verschiedener Derivate liefern wichtige Information für die Entwicklung neuartiger Derivate, einschließlich verwandter Polymere, mit verbesserten spektroskopischen Eigenschaften. Es wurden transiente Absorptionsmessungen bestimmter Fc-B-bpy-Derivate in Lösung nach gepulster Anregung der MLCT-Bande (bei 500 nm) über einen Zeitbereich von 0,1-1000 ps und einen Wellenlängenbereich von 460-760 nm vorgenommen. Aus den Messergebnissen geht hervor, dass die Relaxation aus dem angeregten MLCT-Zustand in den Grundzustand auf verschiedenen Zeitskalen geschehen kann, welche im Bereich zwischen ~18 und 900 ps liegen. Ein Vergleich verschiedener Derivate mit unterschiedlicher Flexibilität in der Konformation zeigt, dass die Starrheit der Bindungen zwischen Donatoren und Akzeptoren ein wesentlicher Faktor für die Lebensdauer des angeregten Zustands ist. Wenn die Akzeptorgruppen relativ frei rotieren können, ist es der Verbindung möglich, eine Geometrie einzunehmen, von der aus ein effizienter, strahlungsfreier Übergang in den Grundzustand erfolgen kann. Dieser Befund zeigt einen Weg auf, wie neuartige, verwandte Verbindungen mit größerer Lebensdauer das angeregten Zustands synthetisiert werden können, indem darauf geachtet wird, daß eine starre molekulare Architektur zwischen Donator und Akzeptor verwirklicht wird.