Refine
Year of publication
Document Type
- Doctoral Thesis (593) (remove)
Has Fulltext
- yes (593)
Is part of the Bibliography
- no (593) (remove)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (593) (remove)
In this work the preparation of organic donor-acceptor thin films was studied. A chamber for organic molecular beam deposition was designed and integrated into an existing deposition system for metallic thin films. Furthermore, the deposition system was extended by a load-lock with integrated bake-out function, a chamber for the deposition of metallic contacts via stencil mask technique and a sputtering chamber. For the sublimation of the organic compounds several effusion cells were designed. The evaporation characteristic and the temperature profile within the cells was studied. Additionally, a simulation program was developed, which calculates the evaporation characteristics of different cell types. The following processes were integrated: evaporation of particles, migration on the cell walls and collisions in the gas phase. It is also possible to consider a temperature gradient within the cell. All processes can be studied separately and their relative strength can be varied. To verify the simulation results several evaporation experiments with different cell types were employed. The thickness profile of the prepared thin films was measured position-dependently. The results are in good agreement with the simulation. Furthermore, the simulation program was extended to the field of electron beam induced deposition (EBID). The second part of this work deals with the preparation and characterization of organic thin films. The focus hereby lies on the charge transfer salt (BEDT-TTF)(TCNQ), which has three known structure variants. Thin films were prepared by different methods of co-evaporation and were studied with optical microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy (EDX).The formation of the monoclinic phase of (BEDT-TTF)(TCNQ) could be shown. As a last part tunnel structures were prepared as first thin film devices and measured in a He4 cryostat.
This work deals with the use of dielectrics with high permeability, so-called high-k dielectrics in organic thin-film field-effect transistors (FETs). The central part was the preparation of the high-k dielectric and its implementation in transistors, in which organic semiconductors were used as active layer. A field-effect transistor can be used to measure the charge carrier mobility. Employing high-k dielectrics the carrier concentration in the active layer can be greatly increased. In this way, high charge carrier concentrations in organic layers can be achieved without chemical doping. As high-k dielectric strontium titanate (STO) was selected. It is also available as a niobium-doped and therefore conducting substrate material. Thus, one has an ideal substrate for the growth of the dielectric layer in conjunction with a substrate which acts as gate electrode. As the organic semiconductor the small molecules pentacene and copper phthalocyanine (CuPc) were sublimated, as electrical contacts gold was used. As a key part of this work an ultra high vacuum chamber system was constructed for in situ preparation of field effect transistors. For the deposition of the organic thin films a molecular beam deposition chamber was built, including a manipulator and effusion cells as evaporation sources. For the preparation of the dielectric a sputtering chamber was set-up. Another chamber was used in conjunction with an effusion cell for the deposition of the gold contacts. For the structured deposition of the different layers in the devices a shadow mask system was implemented. Movable masks could be positioned by means of a wobble stick onto the sample carriers. The system thus allowed for the use of masks in all chambers. The different thin films required in the transistor structure were first individually prepared and characterized. For the characterization primarily X-ray diffraction and optical microscopy were used. The growth of pentacene was analyzed on aplha-AlO substrates. With X-ray diffraction the (00l) reflections of the thin film phase were observed. In growth studies of CuPc aplha-AlO and STO substrates were used. With X-ray diffraction the aplha-phase was detected. With increasing substrate temperature an increase in crystallinity, but also an increase in surface roughness was observed. The sputtering of STO as a high-k dielectric was studied and optimized. Simultaneously, a high deposition rate, a smooth film surface and good crystallinity of the layer were required. As the most important parameters the substrate temperature, pressure and sputtering power were identified. Argon and oxygen were employed as sputtering gases, as substrate MgO was used. The films showed in comparison to crystalline STO a distortion to larger lattice constants. The degree of distortion decreased with increasing chamber pressure, on the other hand, deposition rate decreased with increasing chamber pressure as well. By combining the individual deposition processes FETs in bottom-gate geometry were prepared. The first step was always sputtering of the STO dielectric on niobium-doped STO substrates. Subsequently, the electrodes and the organic layer were deposited. For comparison transistors on silicon substrates with silicon dioxide (SiO2) as the dielectric were prepared. To study the transistor properties a measurement setup was build. A dielectric constant of about 190 for the STO in the transistors was achieved. The transistors with CuPc as active layer showed p-type conduction behavior. The transistors with STO as dielectric had a much stronger response than those with SiO2. They reached mobilities of 2E-4 cm2/Vs at very low applied voltages of 3V. It could thus be demonstrated that STO is suitable as a dielectric for organic FETs, and that through the use of high-k dielectrics high charge carrier densities can be achieved.
Next-generation DIRC detectors, like the PANDA Barrel DIRC, with improved optical designs and better spatial and timing resolution, require correspondingly advanced reconstruction and PID methods. The investigation of the PID performance of two DIRC counters and the evaluation of the reconstruction and PID algorithms form the core of this thesis. Several reconstruction and PID approaches were developed, optimized, and tested using hadronic beam particles, experimental physics events, and Geant simulations. The near-final design of the PANDA Barrel DIRC was evaluated with a prototype in the T9 beamline at CERN in 2018. The analysis finds excellent agreement between the experimental data and the Geant simulations for all reconstruction algorithms. The best PID performance of up to $5.2 \pm 0.2$ s.d. $\pi$/K separation at 3.5 GeV/c, was obtained with a time imaging PID method. The PANDA Barrel DIRC simulation, as well as the reconstruction and PID algorithms, were evaluated using experimental data from the GlueX DIRC as part of the FAIR Phase-0 program. The performance validation was carried out using physics events of the GlueX experiment and simulations. The initial analysis results of the commissioning dataset show a $\pi$/K separation power of up to 3 s.d. at a momentum of 3.0-3.5 GeV/c, obtained using a geometric reconstruction algorithm.
Conclusion Scale Integration Based on the results of spike-field coherence, the underlying process of shortterm memory seems to involve networks of different sizes within and, most probably, beyond prefrontal cortex. Spikes, which were generated by single neurons, cooperate with local field potentials, which were the slower fluctuations of the environment. Although differences among behavioral conditions appear to be based on rather few instances of phase-locked spikes, the task-related effects on spike-field coherence are highly reliable and cannot be explained by chance, as the comparison of results from experimental and simulated data shows. The differential locking of prefrontal neuron populations with two different frequency bands in their input signals suggests that neuronal activity underlying short-term memory in prefrontal cortex transiently engages cortical circuits on different spatial scales, probably in order to coordinate distributed processes. NeuroXidence method and Synchronizedfiring Based on the results of the calibration datasets, for bi- and multi-variate cases, the extension of NeuroXidence remains its sensitivity and reliability of detecting coordinate firing events for different processes. Based on this extension of NeuroXidence, we demonstrated that in monkey’s prefrontal cortex during short-term memory task, encoding and maintenance of the information rely on the formation of neuronal assemblies characterized by precise and reliable synchronization of spiking activity on a millisecond time scale, which is consistent with the results from spike-spike coherence. The task and performance dependent modulation of synchrony reflects the dynamic formation of group of neurons has large effect on short-term-memory.
Nanocarbon structures, such as fullerenes and nanotubes, have generated considerable interest and research, due to their unique properties and potential applications. In this thesis, we present a study of the phase transition properties of nanocarbon clusters,in particular, we pay special consideration to fullerenes. The work presented in this thesis is largely theoretical and computational in nature, employing as a tool, molecular dynamics simulations to probe the dynamic stability of fullerenes and associated nanocarbon structures such as graphenes and nanotubes.
In this work we investigate phenomenological aspects of an anisotropic quark-gluon plasma. In the first part of this thesis, we formulate phenomenologicalmodels that take into account the momentumspace anisotropy of the system developed during the expansion of the fireball at early-times. By including the proper-time dependence of the parton hard momentum scale, phard(), and the plasma anisotropy parameter, Xi, the proposed models allow us to interpolate from 0+1 pre-equilibrated expansion at early-times to 0+1 ideal hydrodynamics at late times. We study dilepton production as a valuable observable to experimentally determine the isotropization time of the system as well as the degree of anisotropy developed at early-times. We generalize our interpolating models to include the rapidity dependence of phard and consider its impact on forward dileptons. Next, we discuss how to constrain the onset of hydrodynamics by demanding two requirements of the solutions to the equations of motion of viscous hydrodynamics. We show this explicitly for 0+1 dimensional 2nd-order conformal viscous hydrodynamics and find that the initial conditions are non-trivially constrained. Finally, we demonstrate how to match the initial conditions for 0+1 dimensional viscous hydrodynamics from pre-equilibrated expansion. We analyze the dependence of the entropy production on the pre-equilibrium phase and discuss limitations of the standard definitions of the non-equilibrium entropy in kinetic theory.
Within this thesis, an experimental study of the photo double ionization (PDI) and the simultaneous ionization-excitation is performed for lithium in different initial states Li (1s22l) (l = s, p). The excess energy of the linearly polarized VUV-light is between 4 and 12 eV above the PDI-threshold. Three forefront technologies are combined: a magneto-optical trap (MOT) for lithium generating an ultra-cold and, by means of optical pumping, a state-prepared target; a reaction microscope (ReMi), enabling the momentum resolved detection of all reaction fragments with high-resolution and the free-electron laser in Hamburg (FLASH), providing an unprecedented brilliant photon beam at favourable time structure to access small cross sections. Close to threshold the total as well as differential PDI cross sections are observed to critically depend on the excitation level and the symmetry of the initial state. For the excited state Li (1s22p) the PDI dynamics strongly depends on the alignment of the 2p-orbital with respect to the VUV-light polarization and, thus, from the population of the magnetic substates (mp = 0, ±1). This alignment sensitivity decreases for increasing excess energy and is completely absent for ionization-excitation. Time-dependent close-coupling calculations are able to reproduce the experimental total cross sections with deviations of at most 30%. All the experimental observations can be consistently understood in terms of the long range electron correlation among the continuum electrons which gives rise to their preferential back-to-back emission. This alignment effect, which is observed here for the first time, allows controlling the PDI dynamics through a purely geometrical modification of the target initial state without changing its internal energy.
In der vorliegenden Arbeit wird die Photodoppelionisation (PDI) von Helium (He) experimentell untersucht. Dazu wurde an der Synchrotronstrahlenquelle Advanced Light Source des Lawrence Berkeley National Laboratory (USA) der vollständig differentielle Wirkungsquerschnitt (FDCS) der PDI von He mit linear sowie mit links und rechts zirkular polarisiertem Licht bei den zwei Photon-Energien E_gamma = 179 eV und 529 eV gemessen. Dabei gelang erstmals eine Messung, bei der die Kontinuumsenergie der Fragmente wesentlich über der Bindungsenergie (79 eV) des Systems liegt. Aufgrund dieser hohen Energie lassen die gemessenen Winkel- und Energieverteilungen erstmals Rückschlüsse auf die Wechselwirkungsprozesse in der Ionisation zu. In allen bisherigen Messungen bei niedrigen Photon-Energien überdeckt der Einfluß der Elektron-Elektron-Wechselwirkung im Endzustand alle Spuren der seit langem theoretisch diskutierten Reaktionsmechanismen. Der FDCS der PDI von He wurde mit einer COLTRIMS (COLd Target Recoil Ion Momentum Spectroscopy)-Apparatur gemessen. Hierbei wird das Gastarget durch eine adiabatische Expansion gekühlt und dann mit dem Photon-Strahl zum Überlapp gebracht. Die bei einer Reaktion freigesetzten Elektronen, deren Summenenergie sich zu E_sum = E_1 + E_2 = E_gamma - 79 eV berechnet (die Summenenergie der beiden Elektronen ist gleich der Überschußenergie E_exc), werden mit einer Energie bis zu E_1,2 = 60 eV durch ein elektrisches und magnetisches Feld im vollen Raumwinkel von 4 pi auf einem großen ortssensitiven Detektor abgebildet. Das elektrische Feld projiziert die kalten Rückstoßionen auf einen zweiten ortssensitiven Detektor. Aus der Flugzeit und dem Auftreffort werden der Ladungszustand und der Impuls der Teilchen ermittelt. Ergebnisse: Die Energieaufteilung auf die beiden Elektronen erfolgt asymmetrisch. Diese Asymmetrie ist bei der PDI 450 eV über der Doppelionisationsschwelle (79 eV) stärker ausgeprägt als bei E_exc = 100 eV. Langsame Elektronen werden generell isotrop zur Polarisation emittiert (beta = 0), während die 100 eV-Elektronen einen Anisotropie-Parameter von beta = 1,7 und die sehr schnellen 450 eV-Elektronen sogar eine Dipolverteilung (beta = 2) bzgl. der Polarisationsachse aufweisen. Eine asymmetrische Energieaufteilung zusammen mit einem Anisotropie-Parameter von beta = 2 für die 450 eV-Elektronen zeigt, daß bei der PDI 450 eV über der Schwelle ein Zwei-Stufen-Prozeß vorliegt, in dem das erste Elektron die Energie und den Drehimpuls des Photons aufnimmt. Das zweite Elektron gelangt dann durch den Shake-off oder den Two-Step-One-Mechanismus ins Kontinuum. Sowohl die Häufigkeitsverteilung der Zwischenwinkel der Elektronen als auch der Verlauf der Quadrate der geraden und der ungeraden Amplituden bei der PDI 450 eV über der Schwelle zeigen, daß sehr langsame Elektronen (2 eV) hauptsächlich durch den Shake-off-Mechanismus ins Kontinuum gelangen, während etwas schnellere 30 eV-Elektronen ihre Energie über einen (e,2e)-Stoß (Two-Step-One-Mechanismus) erhalten. Für 100 eV über der Schwelle zeigt sich, daß der Relativimpulsvektor der beiden Elektronen parallel zum Polarisationsvektor steht. Das bedeutet, daß die PDI von He 100 eV über der Schwelle nicht mehr im Gültigkeitsbereich der Wannier-Näherung liegt. Aufgrund der großen Geschwindigkeitsdifferenzen kann die PDI von Helium parallel zum Polarisationsvektor erfolgen. Der gegen den Zwischenwinkel varphi_12 der Elektronen aufgetragene normierte Zirkulare Dichroismus CD_n ist bei E_exc = 100 eV wesentlich stärker ausgeprägt als bei E_exc = 450 eV. Der Wert des Extremums ist für alle Energieaufteilungen - außer der symmetrischen - gleich. Für beide Überschußenergien findet man eine Abhängigkeit der varphi_12-Position des Extremums von der Energieaufteilung. Die Extreme entfernen sich mit zunehmender asymmetrischer Energieaufteilung von varphi_12=180°. Die experimentell gewonnenen Ergebnisse zu den vollständig differentiellen Wirkungsquerschnitten der PDI von He sowohl mit linear als auch mit links und rechts zirkular polarisiertem Licht bei 100 eV und 450 eV über der Doppelionisationsschwelle zeigen insgesamt gute Übereinstimmungen mit den Ergebnissen der convergent-close-coupling-Rechnungen von A. Kheifets und I. Bray.
Die vorliegende Arbeit bietet zunächst einen weiteren Beweis für die Existenz des neutralen Heliumdimers. Darüber hinaus konnten zwei verschiedene Prozesse identifiziert werden, über die die Absorbtion eines Photons zur Ionisation beider Atome des Dimers über sehr große Abstände führen kann. Oberhalb einer Photonenenergie von 65,4 eV konnte ein ICD Prozess beobachtet werden, der über Photoionisation mit gleichzeitiger Anregung von einem der beiden Atome realisiert wird. Bei 77,86 eV konnte ICD über elektronisch angeregte Zustände bis n=6 nachgewiesen werden. In der KER-Verteilung konnten zudem Strukturen gefunden werden, die auf Vibrationsanregungen im Zwischenzustand des Dimer-Ions schließen lassen. Eine vollständig quantenmechanische Rechnung von Sisourat et al. konnte dies schließlich hervorragend bestätigen. Es konnte also ein direkter Blick auf die Vibrationswellenfunktionen des Systems erlangt werden. In anderen Systemen ist dies in der Regel nicht möglich, da sich alle Zustände üblicherweise zu einer strukturlosen Verteilung überlagern. Weiterhin konnte gezeigt werden, dass sich die Winkelverteilungen von ICD- und Photoelektronen in verschiedenen Bereichen des KER mitunter stark voneinander unterscheiden. Dies konnte auf die unterschiedliche Besetzung von verschiedenen Potentialkurven zurückgeführt werden. Unterhalb der Photonenenergieschwelle zur Anregung und Ionisation eines Heliumatoms konnte ein weiterer, zweistufiger Ionisationsmechanismus gefunden werden. Hier wird zunächst durch Photoionisation ein Elektron aus einem der beiden Atome im Dimer freigesetzt. Dieses Photoelektron kann nun am neutralen Atom gestreut werden und dabei ausreichend viel Energie übertragen, um dieses ebenfalls zu ionisieren. Es konnte gezeigt werden, dass der Prozess einer Abhängigkeit von der Polarisation der Synchrotronstrahlung unterliegt, die man für Photoionisation erwarten würde. Die Energie- und Winkelverteilungen der Elektronen konnten daher mit vorangegangenen Elektronenstoß-Experimenten verglichen werden. Die gute Übereinstimmung mit diesen Daten rechtfertigt eine anschauliche Sichtweise des Prozesses als Analogon zum klassischen Billiard-Stoß. Der Two-Step-Prozess wurde bisher zwar schon in vielen Systemen als theoretisches Modell zur Doppelionisation beschrieben, allerdings konnten die einzelnen Unterprozesse bisher nicht gesondert gemessen werden. Die großen Abstände im Heliumdimer ermöglichen erstmals eine deutliche Trennung in Photoionisation an einem Atom und Elektronenstoß (e,2e) am Nachbaratom. Der Two-Step-Prozess konnte außerdem dazu verwendet werden, die ungewöhnliche Grundzustandswellenfunktion des Heliumdimers zu experimentell zu bestätigen. Eine Analyse des gemessenen KER konnte dabei deutliche Abweichungen zu einer klassischen Theorie aufzeigen. Erst eine vollständig quantenmechanische Rechnung des Übergangs von Sisourat et al. konnte die Messdaten beschreiben.
Im Rahmen dieser Dissertation wurde die Photophysik und die elektronische Struktur einer Klasse neuartiger Donator-Akzeptor-Ladungstransfer-Komplexe untersucht. Im Wesentlichen bestehen diese Verbindungen aus einem Ferrocen-Donator (Fc) und organischen Akzeptoren, die über B-N-Bindungen verbrückt sind, welche sich bei dieser Art von makromolekularen Systemen spontan bilden. Zentraler Gegenstand dieser Arbeit war die spektroskopische Untersuchung des Metall-zu-Ligand-Ladungstransfers (engl. Abkürzung: MLCT) im elektronischen Anregungszustand dieser kationischen Komplexverbindungen, die im Weiteren als „Fc-B-bpy“-Verbindungen bezeichnet werden. Die vorliegende Arbeit analysiert eine Vielzahl miteinander verwandter Fc-B-bpy-Derivate. Die Arbeit ist gegliedert in 1.) die Analyse der Absorptionsspektren vom UV- bis zum nahen Infrarot-Spektralbereich (250-1000 nm) von Lösungen, dotierten Polymer-Dünnfilmen und Einkristallen, 2.) die zeitaufgelöste optische Spektroskopie des angeregten Zustands auf der Pikosekunden-Zeitskala, 3.) die Analyse elektrochemischer Messungen an Lösungen, und 4.) die Auswertung quantenchemischer Berechnungen. Für die zeitaufgelösten Messungen wurde ein komplexes optisches Spektroskopie-System mit breitbandigen Femtosekunden-Pulsen sowie den entsprechenden zeitaufgelösten Detektionsmethoden (spektral gefilterte Weißlicht-Detektion) aufgebaut. Die Ergebnisse dieser Arbeit beweisen die Existenz eines MLCT-Übergangs mit fast vollständigem Übergang eines Fc-Donator-Elektrons zum B-bpy-Akzeptor bei optischer Anregung. Die vergleichenden Untersuchungen der spektroskopischen Eigenschaften verschiedener Derivate liefern wichtige Information für die Entwicklung neuartiger Derivate, einschließlich verwandter Polymere, mit verbesserten spektroskopischen Eigenschaften. Es wurden transiente Absorptionsmessungen bestimmter Fc-B-bpy-Derivate in Lösung nach gepulster Anregung der MLCT-Bande (bei 500 nm) über einen Zeitbereich von 0,1-1000 ps und einen Wellenlängenbereich von 460-760 nm vorgenommen. Aus den Messergebnissen geht hervor, dass die Relaxation aus dem angeregten MLCT-Zustand in den Grundzustand auf verschiedenen Zeitskalen geschehen kann, welche im Bereich zwischen ~18 und 900 ps liegen. Ein Vergleich verschiedener Derivate mit unterschiedlicher Flexibilität in der Konformation zeigt, dass die Starrheit der Bindungen zwischen Donatoren und Akzeptoren ein wesentlicher Faktor für die Lebensdauer des angeregten Zustands ist. Wenn die Akzeptorgruppen relativ frei rotieren können, ist es der Verbindung möglich, eine Geometrie einzunehmen, von der aus ein effizienter, strahlungsfreier Übergang in den Grundzustand erfolgen kann. Dieser Befund zeigt einen Weg auf, wie neuartige, verwandte Verbindungen mit größerer Lebensdauer das angeregten Zustands synthetisiert werden können, indem darauf geachtet wird, daß eine starre molekulare Architektur zwischen Donator und Akzeptor verwirklicht wird.
In der vorliegenden Arbeit wurden zeitaufgelöste optische und magneto-optische Untersuchungen an den halb-metallischen gemischtvalenten Manganatverbindungen La0.67Ca0.33MnO3 und Nd0.7Sr0.3MnO3 durchgeführt, die wichtige Informationen über die nach der optischen Anregung ablaufenden Relaxationsprozesse lieferten. Dabei wird das zu untersuchende Material mittels eines intensitätsstarken ultrakurzen Lichtpuls angeregt. Die dadurch erzeugten Änderungen in der komplexen dielektrischen Funktion der Probe tastet man mittels eines zweiten intensitätsschwächeren ultrakurzen Lichtpuls ab. Durch eine variable Weglängendifferenz zwischen den optischen Wegen des Anregeund des Abtastpulses erzeugt man eine variable Zeitverzögerung und kann damit die Änderungen in der dielektrischen Funktion zeitaufgelöst untersuchen....
For this thesis photon and pi0 spectra in Gold-Gold-collisions at an energy of sqrt(s_NN) = 62 GeV were measured using the STAR-experiment at RHIC. Heavy ion collisions allow to study strongly interacting matter under extreme condiditons in the laborartory. Nuclear matter is strongly compressed and heated. Theories predict in a system of strongy interacting matter at high temperature and pressure a phase transition from hadronic matter, in which quarks are bound into hadrons, to a plasma of free quarks and gluons (QGP). To study the properties of this created medium, a number of different observables is available. One possibility to determine the temperature of such a system, is to measure the photon emission from the medium. The experimental difficulty is that there are more mechanisms producing photons than just the thermal production. Photons are produced in hard scattering processes or can be the result of the interaction of hard partons with the medium. According to theoretical calculations the photon yield from hard processes exceeds the thermal production for transverse momenta above 3 GeV/c. Photons from hard processes and thermal photons are referred to as direct photons, because they are produced inside of the medium. The largest part of the photons below pt=3GeV/c, however, comes from electromagnetic decays of hadrons in the final state of the collision. The largest fraction comes from the pi0- and the eta-mesons. Their contribution to the photon spectra can be determined by measuring the spectra of these decaying particles and calculating the resulting, corresponding photon spectra. The experimental difficulty is to measure these spectra to an accuracy of a few percent because the decay photons make up about 90% of all photons in the relevant phase space region. The STAR-experiment provides different detectors to measure photons and pi0-mesons. The primary detector for this kind of measurement are the electromagnetic calorimeters. However, the analysis described in this thesis uses the time projection chamber (TPC). Because photons don't carry electric charge and the TPC is only sensitive to charged particles, a conversion of the photon into an electron-positron-pair is required. This happens inside the electromagnetic fields of the nuclei and the electrons in the atomic shell of the detector material in the experimental setup of STAR. The resulting electron and positron tracks are measrued in the TPC. In chapter 3 the reconstruction of conversions from the measured tracks is described. Chapter 4 discusses the efficiency of the measurement, which is determined with a Monte-Carlo-Method, and the uncertainties of the correction. Chapter 5 presents the results of the analysis. The data set, on which the analysis is based, consists of Gold-Gold-Collisions an a center of mass energy of sqrt(s_NN)=62GeV. The selection criteria for individual events during data taking and during the analysis are explained. The data set is divided into four centrality selection classes. The first result are the transverse momentum and rapidity spectra of inclusive photons for all four centralities and the whole data set. Pi0-spectra versus transverse momentum for the four centralities and the whole data set are also shown. The pi0-spectra are compared to the spectra of pi0-mesons measured by the PHENIX-Collaboration at the same energy and with pi0-spectra measured by STAR at full RHIC energy. In addition a comparison to charged pi+- and pi--spectra is shown, which were also measured by the STAR collaboration. It is attempted to extract the fraction of direct photons by dividing the spectra of inclusive photons by the spectra of simulated decay photons. In these simulations pi0- and eta-spectra are modeled based on the pi+- and pi--spectra. Studying the uncertainties of this procedure shows that the size of the uncertainties is of the same magnitude as the signal of direct photons. Also the systematic uncertainties of the pi+- and pi--spectra are similar. Therefore the measurement of direct photon spectra is not possible. In chapter 6 possibilities are described to reduce the large systematic uncertainties. In addition it is discussed, what could be done with an already existing data set at full RHIC energy and how the addition of a dedicated converter during a future data taking period could reduce the systematic errors. The result of this thesis are inklusive photon and pi0 spectra. The systematic uncertainties were extensively studied. It is described, which enhancements are necessary to provide the perspective for measuring direct photons in the area of 1 to 3 GeV/c transverse momentum.
This dissertation connects two independent fields of theoretical neuroscience: on the one hand, the self-organization of topographic connectivity patterns, and on the other hand, invariant object recognition, that is the recognition of objects independently of their various possible retinal representations (for example due to translations or scalings). The topographic representation is used in the presented approach, as a coordinate system, which then allows for the implementation of invariance transformations. Hence this study shows, that it is possible that the brain self-organizes before birth, so that it is able to invariantly recognize objects immediately after birth. Besides the core hypothesis that links prenatal work with object recognition, advancements in both fields themselves are also presented. In the beginning of the thesis, a novel analytically solvable probabilistic generative model for topographic maps is introduced. And at the end of the thesis, a model that integrates classical feature-based ideas with the normalization-based approach is presented. This bilinear model makes use of sparseness as well as slowness to implement "optimal" topographic representations. It is therefore a good candidate for hierarchical processing in the brain and for future research.
Precise intensity monitoring at CRYRING@ESR: on designing a Cryogenic Current Comparator for FAIR
(2023)
In the field of today’s beam intensity diagnostic there is a significant gap in the non-interceptive, calibrated measurement of the absolute intensity of continuous (unbunched) dc beams with current amplitudes below 1 μA. At the Facility for Antiproton and Ion Research (FAIR) low-intensity DC beams will occur during slow extraction from the synchrotrons as well as for coasting beams of highly-charged or exotic nuclei in the storage rings. The lack of adequate beam instrumentation limits the experimental program as well as the accuracy of experimental results.
The Cryogenic Current Comparator (CCC) can close the diagnostic gap with a high-precision dc current reading independent of ion-species and of beam parameters. However, the established detector design based on a core with high magnetic permeability and on a radial shield geometry has well-known weaknesses concerning magnetic shielding efficiency and intrinsic current noise. To eliminate these weaknesses, a novel coreless CCC with a co-axial shield was constructed and combined with a high-performance SQUID contributed by the Leibniz-Institute of Photonic Technology (Leibniz-IPHT Jena). The new axial CCC model was compared to a radial CCC with the established design provided by the Friedrich-Schiller-University Jena. According to numerical simulations prepared at TU Darmstadt and test measurements of the detectors in the laboratory, the new design offered a significant improvement of the shielding factor – from 75dB to 207dB at the required dimensions – and eliminated all noise contributions from the core material, promising an improved current resolution. Although the lower inductance of the pickup coil reduced the coupling to the beam significantly, the noise properties of the new CCC type were comparable to the classical version with a high-permeability core. However, the expected decrease of the low-frequency noise and thus an increase of the current resolution could not be observed at this stage of development.
Consequently, the classical CCC based on the radial shielding and high-permeability core had to be installed in CRYRING@ESR to provide best possible intensity measurements for the upcoming experimental campaign. In CRYRING the CCC was operated with beam currents between 1nA and 20μA and with different ion species (H, Ne, O, Pb, U). It was shown that the CCC provides a noise-limited current resolution of better than 3.2 nArms at a bandwidth of 200 kHz as well as a noise level below 40 pA/√Hz above 1 kHz. During the operation, the main noise sources of the accelerator environment had to be identified and suitable mitigation strategies were developed. Temperature and pressure fluctuations were suppressed with a newly-designed cryogenic support system based on a 70 l helium bath cryostat, developed and built in collaboration with the Institut für Luft- und Kältetechnik Dresden, in combination with a helium re-liquefier. The cryogenic operating time was restricted to around 7 days, which must be expanded significantly in the future. Digital filters were developed to remove the perturbations of the helium liquefier and of the neighboring dipole magnets. Given the promising results the CCC system can be considered as a prototype for future CCCs at FAIR.
Precise tune determination and split beam emittance reconstruction at the CERN PS synchrotron
(2023)
In accelerator physics, the need to improve the performance and better control the operating point of an accelerator has become, year after year, an increasingly important need in order to achieve higher energies and brightness, as well as point-like particle beams. If this involves increasingly advanced technological developments (in terms, for example, of materials for more intense superconducting magnets), it can not take place in the absence of targeted studies of linear and non-linear beam dynamics. In the context of this Ph.D. thesis in physics, linear and non-linear dynamics of charged particles in circular accelerators is the topic that will be discussed and treated in detail. In particular, the presentation and discussion of the results will be divided in two main topics: the need to know the physical properties of a proton beam; and the development of innovative methods to determine and study the accelerator’s working point. With regard to the first topic, an innovative procedure will be presented to determine the transverse size of the PS beam in the beam extraction phase. Among the different ways the extraction occurs at the PS, the analysed one is based on the transverse splitting of the beam by means of non-linear fields. Thus, the knowledge of the transverse beam size is not trivial since resonant linear and non-linear beam structures (namely, core and islands) arise and, for each of them, the beam size has to be quantified. This parameter is crucial for two main reasons: the accelerator that will receive the beam exiting the upstream accelerator may have restrictions (physical or magnetic) that involve a partial or total loss of the incoming beam; and any experiments located downstream of the considered accelerator may need a beam with a transversal size as constant as possible; consequently, its monitoring and control are essential. The second topic concerns the accurate determination of the working point of an accelerator, defined as the number of transverse oscillations the particle beam travels per unit of accelerator circumference, both horizontally and vertically. This quantity is called horizontal and vertical tune, respectively. Their knowledge is also crucial to understand whether the beam will be stable or unstable. In fact, not all tune values are acceptable, as there are particular values that bring the beam into resonance. In this configuration, the amplitude of the transverse oscillations of the particles increases in an uncontrolled manner and leads to the loss of all or part of the beam. Note that, in particular operating conditions, the resonant conditions are sought and desired to model, in a suitable way, the transversal shape of the beam, such as the above mentioned PS extraction scheme. It is even clearer how much the determination of the machine working point is essential to determine the operating conditions of an accelerator. In this context, several methods (also taken from the field of applied mathematics) to calculate the tune will be demonstrated and tested numerically on different types of synthetic signals. At the end of this description, the use of experimental data will allow to obtain the benchmark of a new method for the direct calculation of some characteristic quantities of non-linear beam dynamics (namely, the amplitude detuning, i.e. the variation of tune as a function of intensity of the perturbation provided to the beam.
In this work we study compact stars, i.e. neutron stars, as cosmic laboratories for the nuclear matter. With a mass of around 1 - 3 solar masses and a radius of around 10km, compact stars are very dense and, besides nucleons, can contain exotic matter such as hyperons or quark matter. The KaoS collaboration studied nuclear matter for densities up to 2-3 times saturation density by analysing kaon multiplicities from Au+Au and C+C collisions. The results show that nuclear matter in the corresponding density region is very compressible, with a compressibility of <200MeV. For such soft nuclear equations of state the maximum masses of neutron stars are ca. 1.8 - 1.9 solar masses, whereas the central densities are higher than 5 times nuclear saturation density and therefore point towards a possible phase transition to quark matter. If quark matter would be present in the interior of neutron stars, so-called hybrid stars, it could be produced already during their birth in supernova explosions. To study this we implement a quark matter phase transition in a hadronic equation of state which is used in supernova simulations. Supernova simulations of low and intermediate mass progenitors and two different bag constants show a collapse of the proto neutron star due to the softening of the equations of state in the quark-hadron mixed phase. The stiffening of the equation of state for pure quark matter halts the collapse and leads to the production of a second shock wave. The second shock wave is energetic enough to lead to an explosion of the star and produces a neutrino burst when passing the neutrinospheres. Furthermore, first studies of the longtime cooling of hybrid stars show, that colour superconductivity can significantly influence the cooling behaviour of hybrid stars, if all quarks form Cooper Pairs. For the so-called CSL phase (colour-spin locking) with pairing energies of several MeV, the cooling of the quark phase is suppressed and the hybrid star appears as a pure hadronic star.
This work focuses on the investigation of K+, K- and ϕ-meson production in Ag(1.58 A GeV)+Ag collisions. The energetically cheapest channel for direct K+ production in binary NN-collisions NN→NΛK+ lies at exactly this energy. For the remaining K- and ϕ-mesons, an excess energy of 0.31 GeV and 0.34 GeV in the centre of mass system has to be provided by the system. This makes these particles an excellent probe for effects inside the medium.
K+ and K- mesons can be reconstructed directly as they possess a cτ of approximately 3.7 m. Using the approximately 3 billion recorded Ag(1.58 A GeV)+Ag 0-30% most central collision events, all reconstructed K+ and K- within the detector acceptance are investigated for their kinematic properties and their particle production rates compared to a selection of existing models.
Das Feld der Hochenergie-Schwerionenforschung hat sich der Untersuchung des Quark-Gluon-Plasmas (QGP) gewidmet. Ein QGP ist ein sehr heißer und dichter Materiezustand, der kurz nach dem Urknall für einige Mikrosekunden das Universum füllte. Unter diesen extremen Bedingungen sind die fundamentalen Bausteine der Materie, die Quarks und Gluonen, quasi frei, also nicht in Hadronen eingeschlossen, wie es unter normalen Bedingungen der Fall ist. Hadronen sind Teilchen, die aus Quarks und Gluonen bestehen. Die bekanntesten Hadronen sind Protonen und Neutronen, die Bestandteile von Atomkernen, aus denen, zusammen mit Elektronen, die gesamte bekannte Materie aufgebaut ist.
Um ein QGP im Labor zu erzeugen, lässt man ultrarelativistische schwere Ionen, wie zum Beispiel Pb-208-Kerne, aufeinander prallen. Dies geschieht am CERN, dem größten Kernforschungszentrum der Welt. Der Teilchenbeschleuniger, welcher Protonen und Pb-Kerne beschleunigt und zur Kollision bringt, heißt Large Hadron Collider (LHC) und ist mit 27 km Umfang der größte der Welt. Bei einer einzigen Pb-Pb Kollision am LHC werden mehrere Tausend Teilchen und Antiteilchen erzeugt. Das dedizierte Experiment zur Untersuchung von Schwerionenkollisionen am LHC ist ALICE. ALICE ist mit mehreren Teilchendetektoren ausgerüstet, die es ermöglichen, tausende Teilchen gleichzeitig zu messen und zu identifizieren.
Unter den produzierten Teilchen befinden sich auch leichte Atomkerne, wenngleich diese nur sehr selten erzeugt werden. Die Anzahl der produzierten Teilchen pro Teilchensorte hängt nämlich von deren Masse ab. In Pb-Pb Kollisionen am LHC sinkt die Anzahl der produzierten (Anti)kerne exponentiell um einen Faktor 1/330 bei Hinzufügen jedes weiteren Nukleons. Die Menge an produzierten Teilchen pro Spezies stellt Informationen über den Produktionsmechanismus beim Übergang vom QGP zum Hadrongas zur Verfügung. Hierbei sind leichte (Anti)kerne von besonderem Interesse, da sie vergleichsweise groß sind und ihre Bindungsenergie bis zu zwei Größenordnungen kleiner ist als die Temperaturen, die bei der Erzeugung der Hadronen vorherrschen. Es ist bis heute noch nicht verstanden, wie leichte (Anti)kerne bei diesen Bedingungen erzeugt werden und überleben können.
Für diese Arbeit wurden ca. 270 Millionen Pb-Pb Kollisionen bei einer Schwerpunktsenergie von 5,02 TeV, die von ALICE im November 2018 aufgezeichnet wurden, analysiert. Es wurde die Produktion von (Anti)triton und (Anti)alpha untersucht. Wegen ihrer großen Masse werden beide Kerne sehr selten produziert, bei weitem nicht bei jeder Kollision. Antialpha ist der schwerste Antikern, der jemals gemessen wurde. Aufgrund dieser Seltenheit ist die Größe des zur Verfügung stehenden Datensatzes entscheidend. Es war möglich, das erste jemals gemessene Antialpha-Transversalimpulsspektrum zu extrahieren. Auch für (Anti)triton und Alpha wurden Transversalimpulsspektren bestimmt.
Die Ergebnisse wurden mit theoretischen Modellen und anderen ALICE Messungen verglichen.
Am Ende wird in einem Ausblick auf das kürzlich durchgeführte Upgrade der ALICE Spurendriftkammer (TPC) eingegangen. In der nächsten, bald startenden Datennahmeperiode wird der LHC seine Kollisionsrate erheblich erhöhen, was es ermöglichen wird, mehr als 100 mal so viele Daten wie bisher aufzuzeichnen. Hiervon werden die in dieser Arbeit beschriebenen (Anti)triton- und (Anti)alpha-Analysen beachtlich profitieren. Um mit den erheblich höheren Kollisionsraten zurecht zu kommen, mussten einige Detektoren, unter anderem die TPC, maßgeblich erneuert werden. In den ersten beiden Datennahmeperioden wurde die TPC mit Vieldrahtproportionalkammern betrieben. Diese sind allerdings viel zu langsam für die geplanten Kollisionsraten. Deshalb wurden sie im Jahr 2019, während einer langen Betriebspause des LHC, durch Quadrupel-GEM (Gas Electron Multiplier) Folien basierte Auslesekammern ersetzt, welche eine kontinuierliche Auslese der TPC ermöglichen. Da es sich um die erste jemals gebaute GEM TPC im Großformat handelt, war ein umfangreiches Forschungs- und Entwicklungs- (F&E) Programm notwendig, um die GEM Auslesekammern zu charakterisieren und zu testen. Im Rahmen dieses F&E Programms wurden am Anfang dieser Promotion systematische Messungen an einer kleinen Test TPC mit Quadrupel-GEM Auslese, die extra zu diesem Zweck gebaut worden war, durchgeführt. Hierbei wurde der Rückfluss der bei der Gasverstärkung erzeugten Ionen in das Driftvolumen der TPC und die Energieauflösung mit verschiedenen GEM Folien Typen und unterschiedlicher Anordnung gemessen. Das Ziel war, möglichst kleine Ionenrückflüsse bei möglichst guter Energieauflösung zu erreichen. Hierbei musste ein Kompromiss gefunden werden, da die beiden Größen sich gegenläufig verhalten. Es war jedoch möglich, mit mehreren GEM Konfigurationen Spannungseinstellungen zu identifizieren, bei denen beide Größen den gewünschten Anforderungen entsprachen.
Der Ursprung der Masse bekannter Teilchen und der Einschlu der Quarks in Hadronen ist einer der grundlegendsten Fragestellungen der modernen Physik. Die Kenntnis des Verhaltens von Kernmaterie unter extremen Bedingungen ist unabdingbar zum Verstandnis der Evolution des Universums und zur Theoriebildung von stellaren Objekten wie Neutronensternen und schwarzen Löchern. Einen experimentellen Zugang zur Untersuchung dieser Problematik stellt die Erzeugung heier und dichter Kernmaterie in ultrarelativistischen Schwerionenkollisionen dar. Hierzu untersucht das NA49 Experiment seit Herbst 1994 am 208-Pb-Strahl des CERN-SPS Pb+Pb Kollisionen bei 158 GeV pro Nukleon. Ein Schwerpunkt des Forschungsprogrammes liegt in der Untersuchung des Zustandes der Materie in der frühen Phase der Reaktion. Nach gegenwartem Stand der Theorie wird bei genugent hoher Energiedichte der Einschlu der Quarks in Hadronen aufgebrochen und ein Zustand der Materie erzeugt, in welchen die eektiven Freiheitsgrade von Hadronen und Hadronen-Resonanzen in die von Quarks und Gluonen übergehen - das sogenannte Quark-Gluon-Plasma (QGP). Die Honung ist nun, da sich die Formation eines solchen QGP im hadronischen Endzustand wiederspiegelt. Es wird erwartet, da die Seltsamkeitsproduktion in einem QGP sich in ihrer Rate und ihren Gleichgewichtswerten von der in einem hadronischen Feuerball-Szenario unterscheidet und sich somit als Signatur fur die Erzeugung eines GQP eignet. Von besonderen Interesse ist hier die Produktion von Hyperonen. Schwerpunkt dieser Arbeit ist die Untersuchung der Produktion von doppelt seltsamen geladenen -Hyperonen in zentralen Pb+Pb Kollisionen. Zu diesem Zweck wurden 58000 zentrale Pb+Pb Ereignisse der im Herbst 1995 aufgezeichneten Reaktionen untersucht. Die Analyse der Daten wurde auschlielich mit der zweiten Spurendriftkammer (VTPC2) durchgeführt. Zur Rekonstruktion der -Hyperonen muten Verfahren entwickelt werden, um die typischen Zerfalls-Topologien der doppelt seltsamen Hyperonen aus der Vielzahl von ca. 700 in der Vertex-TPC gemessenen geladenen Teilchenspuren herauszulösen. Aus den in der kombinatorischen Analyse rekonstruierten 720 und 138 + - Hyperonen konnten Spektren des Transversalimpulses und Rapiditatsverteilungen ermittelt werden. Die gewonnene Phasenraum-Akzeptanz fur die in der VTPC2 gemessenen und + - Hyperonen beträgt ....