Refine
Year of publication
Document Type
- Doctoral Thesis (139) (remove)
Has Fulltext
- yes (139)
Is part of the Bibliography
- no (139)
Keywords
- Stratosphäre (4)
- Eiskeime (3)
- Meteorologie (3)
- Monsun (3)
- Schwerewellen (3)
- Anisotropie (2)
- BTEX (2)
- Belize (2)
- Boden (2)
- Caribbean (2)
Institute
- Geowissenschaften (139) (remove)
In this study, I investigate the crustal and upper mantle velocity structure beneath the Rwenzori Mountains in western Uganda. This mountain range is situated within the western branch of the East African Rift and reaches altitudes of more than 5000 m. I use four different approaches that belong to the travel-time tomography method. The first approach is based on the isotropic tomographic inversion of local data, which contain information about 2053 earthquakes recorded by a network of up to 35 stations covering an area of 140×90 km2. The LOTOS-09 algorithm described here is used to realize this approach. The second approach is based on the anisotropic tomographic inversion of the same local dataset. This method employs the tomographic code ANITA, developed with my participation, which provides 3D anisotropic P and isotropic S velocity distributions based on P and S travel-times from local seismicity. For the P anisotropic model, four parameters for each parameterization cell are determined. This represents an orthorhombic anisotropy with one vertically-oriented predefined direction. Three of the parameters describe slowness variations along three horizontal orientations with azimuths of 0°, 60° and 120°, and one is a perturbation along the vertical axis. The third approach is based on tomographic inversion of the teleseismic data, which contain information about the traveltimes of P-waves coming from 284 teleseismic events recorded by the seismic network stations. The TELELOTOS code, which is my own modification of the LOTOS-09 algorithm, is used in this approach. The TELELOTOS code is designed to iteratively invert the local and/or teleseismic datasets. Finally, I present the results of the new tomographic approach, which is based on the simultaneous inversion of the joint local and teleseismic data. The simultaneous use of these datasets for the tomographic inversion has several advantages. In this case, the velocity structure in the study area can be resolved as deep as in the teleseismic approach. At the same time, in the upper part of the study volume, the resolution of the obtained models is as good as in the local tomography. The TELELOTOS algorithm is used to perform the joint tomographic inversion. Special attention is paid in this work to synthetic testing. A number of different synthetic and real data tests are performed to estimate the resolution ability and robustness of the obtained models. In particular, synthetic tests have shown that the results of the anisotropic tomographic inversion of the local data have to be considered as unsatisfactory. For all approaches used in this study, I present synthetic models that reproduce the same pattern of anomalies as that obtained by inverting the real data. These models are used to interpret the results and estimate the real amplitudes of the obtained anomalies. The obtained models exhibit a relatively strong negative P anomaly (up to -10%) beneath the Rwenzori Mountains. Low velocities are found in the northeastern part of the array at shallower depths and are most likely related to sedimentary deposits, while higher velocities are found beneath the eastern rift shoulder and are thought to be related to old cratonic crust. The presence of low velocities in the northwestern part of the array may be caused by a magmatic intrusion beneath the Buranga hot springs. Relatively low velocities were observed within the lower crust and upper mantle in the western and southern parts of the study area (beneath the rift valley and the entire length of the Rwenzori range). The higher amplitude of the low-velocity anomaly in the south can be related to the thinner lithosphere in the southern part of the Albertine rift. In the center of the study area, a small negative anomaly is observed, with the intensity increasing with depth. This anomaly is presumably related to a fluids rising up from a plume branch in the deeper part of the mantle. According to the interpretation of the local earthquake distribution, the Rwenzori Mountains are located between two rift valleys with flanks marked by normal faults. The Rwenzori block is bounded by thrust faults that are probably due to compression.
Delthyridoid spiriferids are characterized by a global abundance and fast evolution during Silurian and Devonian, and, therefore, are used as important biostratigraphical and palaeobiogeographical tools. In this work, delthyridoid brachiopod faunas from different regions of today’s world, resp., of different palaeobiogeographical units, are compared side-by-side to investigate their phylogenetic relationships and to improve, in a second step, the palaeobiogeography from Late Silurian to Early Eifelian time. A new systematics of Delthyridoidae is established which is more complicated than hitherto assumed. The results of this study are mainly based on direct comparison of articulated and isolated brachiopod shells, external and internal moulds, as well as latex casts and serial sections. The computer supported cladistic analyses have turned out not to be useful due to different kinds of preservation resulting in an incomplete matrix which is insufficient for reliable cladograms. A further problem in terms of cladistical analyses are various convergences during the evolution of spiriferids. Many characters evolved independently from each other at different times in each lineage so that autapomorphies are hardly or not at all recognizable. As a result, families and genera are only definable by a combination of characters rather than by a single or a few autapomorphies. As a new method, 3D reconstruction from serial sections is introduced which made it possible for the first time to compare directly mouldic and shelly material. Preliminary results are presented herein. Statistical analyses of measurements taken from new taxa are made but regarded as a descriptive argument rather than a deciding factor for taxonmy due to incomplete preservation and/or tectonic deformation. Brachiopods, especially type material, from collections of different institutions and museums are studied as well as personal material, whenever possible collected from topotype outcrops. Emended diagnoses, if necessary, from family to species level are given. During this work several new taxa have been erected: 7 new families: Australospiriferidae, Murchisonispiriferidae, Orientospiriferidae, Otospiriferidae, Patriaspiriferidae, Rostrospiriferidae, and Trigonospiriferidae; 6 new genera, 1 of these in open nomenclature: Cyclopterospirifer, Hallispirifer, Parlinispirifer, Murchisonispirifer, Shujiapingensispirifer, and gen. nov. B; and 3 new species: Patriaspirifer merriami, Patriaspirifer johnsoni, and Murchisonispirifer feldmani; 1 taxon is defined as nomen novum: Orientospirifer nakaolingensis wani. In the framework of this project, 2 families: Filispiriferidae and Multispiriferidae; 1 subfamily: Multiplicatispiriferinae, 6 genera, 1 of them in open nomenclature: Frequentispirifer, Leonispirifer, Multiplicatispirifer, Ovetensispirifer, Turcispirifer, and Gen. A; and 9 new species, 3 of them in open nomenclature: Filispirifer hamadae, Leonispirifer leonensis, Multiplicatispirifer foumzguidensis, Oventensispirifer novascotianus, Quiringites arensentiae, Turcispirifer turciae, Multiplicatispirifer cf. foumzguidensis, Quiringites cf. arensentiae, and ?Turcispirifer sp. A which have already been established are also described in this work. The brachiopod faunas studied consist of externally very similar spiriferids which have been identified as same genera, species, or even subspecies in earlier times. These forms are considered as 6 distinct morphotypes Howellella-, Arduspirifer-, Acrospirifer-, Euryspirifer-, Paraspirifer-, and Multiplicatispirifer-like morphotypes, which are briefly introduced. The new systematics is characterized by different clades, the European/North African delthyridoid spiriferid clade, the North American delthyridoid spiriferid clade, the Asian delthyridoid spiriferid clade, the Malvinokaffric delthyridoid spiriferid clade, and the delthyridoid multiplicated spiriferid clade. Each of them is described in a cladistic and in a phylogenetic way. Their phylogenetic relationship sheds new light on palaeobiogeographical interpretations for the different stages from Late Silurian to early Middle Devonian time. A tendency for increasing endemicity is seen until the end of the Early Emsian, which is interrupted by short term regional faunal exchange within a province or within a realm, followed by a loss of endemicity resulting in global distribution of brachiopod genera until the end of Givetian time. The Old World Realm is re-defined due to the lack of phylogenetic relationship between its faunas and subdivided into the European Realm, consisting of the Gondwanan and Avalonian provinces, and the Asian Realm, consisting of the Siberian, Sino, and Mongolian provinces. A reconstruction of Lower Devonian palaeobiographical map is introduced.
NASAs Stardust Mission ist die erste Mission, die - nach den Apollo Missionen zum Mond - Material von einem extraterrestrischen Körper erfolgreich für die Untersuchung auf der Erde, zurückgebracht hat. Desweiteren konnten erfolgreich Proben von einem Interstellaren Partikelstrom aufgesammelt werden, der das Sonnensystem derzeit passiert. Die Mission erlaubt einen Einblick in die Beschaffenheit der Kometenpartikel, die Rolle von Kometen im Sonnensystem sowie den Eintrag von Staub in die Zodiakalwolke. Desweiteren erlaubt die Analyse der Kometenpartikel den direkten Vergleich zu bereits untersuchten Meteoriten und Interplanetaren Staub Partikeln (IDPs) die auf der Erde bzw. deren Stratosphäre gesammelt wurden. Stardust ist die vierte ”Discovery” Mission und wurde am 7. Februar 1999 gestartet. Während des Fluges zum Kometen 81P/Wild 2 wurde ein interstellarer Partikelstrom beprobt und der Asteroid Annefrank passiert. Nach fünf Jahren kam es zum Zusammentreffen mit dem Kometen 81P/Wild 2 und über fünf Minuten, wurden Proben mit einer Auffangvorrichtung eingesammelt. Es dauerte weitere zwei Jahre bis die Stardust Sonde die Proben erfolgreich zur Erde zurückgebracht hat und zur Untersuchung freigegeben wurden. Interstellare und kometare Partikel wurden mit einer tennisschlägerartigen Auffangvorrichtung eingefangen, die aus einer Vielzahl von Aerogel Zellen aufgebaut ist. Das für die Stardust Mission verwendete Aerogel besteht aus SiO2 dessen dendritische Struktur zu 99,8 % aus Luft (Poren) besteht. Dadurch erscheint es nahezu transparent, was die optische Suche mit Mikroskopen nach den Einschlagsspuren der Körner vereinfacht. Die jeweiligen Partikel wurden auf unterschiedlichen Seiten der Vorrichtung eingefangen, da unterschiedliche Eigenschaften des Aerogels notwendig waren und um sie später voneinander unterscheiden zu können. Die Seite, in der die Kometenpartikel eingefangen wurde, musste Körner mit unterschiedlichen Grössen, Morphologien und niedrigeren Geschwindigkeiten abbremsen, während auf der interstellaren Seite die Körner von wesentlich höheren Geschwindigkeiten abgebremst werden mussten. Die Aerogelzellen haben ein variierendes Dichteprofil: an der Oberfläche ist die Dichte geringer (5 mg/ml) und erhöht sich mit der Tiefe auf 30-50 mg/ml. Dieses Dichteprofil ist notwendig, da beim Einschlag der Körner auf das Auffangmedium ein hoher Druck entsteht, der umso geringer ist, je niedriger die Dichte im Moment des Auftreffens ist. Die Aerogelzellen für die Kometenpartikel haben drei Lagen mit unterschiedlichen Dichten, die Zellen für die interstellaren Körner haben zwei unterschiedliche Dichten (Tsou et al., 2003)....
Das Ziel dieser Studie ist es, die Möglichkeiten und Grenzen von hochauflösenden Klimaprojektionen in orographisch beeinflussten Gebieten an den Beispielen der europäischen Alpen und des Himalajas zu prüfen. Insbesondere wird die Fragestellung untersucht, ob beobachtete regionale Muster in den höher aufgelösten Daten besser wiedergegeben werden als in den antreibenden großskaligen Daten. Dazu werden regionale Klimasimulationen des COSMO-CLM Modells und Daten von zwei statistischen Regionalisierungsmethoden mit ERA40 Reanalysen sowie Daten des globalen Atmosphäre-Ozean Modells ECHAM5/MPIOM für verschiedene Parameter des Klimasystems verglichen. Ein Vergleich mit den Reanalysen anhand täglicher Niederschlagsstatistiken ergibt, dass die COSMO-CLM Niederschlagsdaten auf der 0.5° Skala vergleichbar sind mit ERA40 Niederschlägen und mit statistisch regionalisierten ERA40 Niederschlägen. Eine zusätzliche Fehlerkorrektur der COSMO-CLM Niederschläge liefert gute Ergebnisse. Dabei sind jedoch etwa 500 Regentage notwendig, um eine robuste Fehlerabschätzung zu gewährleisten. Für das südasiatische Gebiet ist eine realistische Wiedergabe des indischen Sommermonsuns (ISM) in den Modellen von hoher Relevanz. Betrachtet man nur die Mittelwerte und zeitlichen Variabilitäten von verschiedenen Indizes des ISM, so liefert das COSMO-CLM keinen Mehrwert im Vergleich zu den antreibenden Daten. Allerdings werden die räumlichen Strukturen von Niederschlag und vertikaler Windscherung, sowie die zeitliche Korrelation der modellierten Indizes gegenüber dem ECHAM5/MPIOM Modell verbessert. Die durchgeführten COSMO-CLM Projektionen für die Jahre 1960 bis 2100 zeigen negative Trends des ISM für die SRES Szenarien A2, A1B und B1. Die negativsten Trends sind dabei im Szenario A2 zu finden, gefolgt von A1B und B1. Fast keine Trends zeigen sich im commitment Szenario. Trotz großen zeitlichen Variabilitäten sind die Abnahmen in Niederschlagsmengen, ausgehender langwelliger Strahlung und Windscherung statistisch signifikant in großen Regionen des Simulationsgebietes. Für Nordwest-Indien weisen die Projektionen teilweise einen Rückgang der Monsunniederschläge von über 70% in 100 Jahren auf. Der Rückgang der Windscherung ist hauptsächlich auf Veränderungen in der oberen Troposphäre bei 200 hPa zurück zu führen. Während in den COSMO-CLM Projektionen alle Indizes des ISM synchrone Negativtrends aufweisen, sind die Trends für den Monsunregen über Indien im globalen ECHAM5/MPIOM Model positiv. Gemäß den Definitionen der verschiedenen Indizes, sind jedoch synchrone Trends wahrscheinlicher und das COSMO-CLM liefert zu den globalen ISM Projektionen ebenfalls einen Mehrwert. Insgesamt zeigen die Ergebnisse dieser Studie, dass das COSMO-CLM wertvolle regionale Zusatzinformationen zu den globalen Modellen in den beiden untersuchten Regionen liefert. Für die Einzugsgebiete der oberen Donau und des oberen Brahmaputra liefern die COSMO-CLM Projektionen einen signifikanten Anstieg der Temperatur für alle Jahreszeiten der Jahre 1960 bis 2100. Die Werte sind generell höher im Brahmaputragebiet, mit den größten Trends in der Region des tibetanischen Plateaus. Im Niederschlag zeigen die saisonalen Anteile ebenfalls klare Trends, beispielsweise eine Zunahme des Frühjahrsniederschlags im Einzugsgebiet der oberen Donau. Die größten Trends werden wiederum in der Region des tibetanischen Plateaus projiziert mit einem Anstieg von bis zu 50% in der Länge der Trockenperioden zwischen Juni und September und einem gleichzeitigen Anstieg von etwa 10% für die maximale Niederschlagsmenge an fünf aufeinander folgenden Tagen. Für die Region Assam in Indien, zeigen die Projektionen zudem eine Zunahme von 25% in der Anzahl der aufeinander folgenden trockenen Tage während der Monsunzeit
The TTL is the transition layer between the tropical troposphere and stratosphere, and is the main region where tropospheric air enters the stratosphere. In this thesis different transport processes are studied by using in situ measurements of tracers. Long-lived tracers were measured with the High Altitude Gas Analyzer (HAGAR) on board the M55 Geophysica aircraft. The instrument was developed by the University of Frankfurt and measures the long-lived tracers CO2, N2O, CFC-12, CFC-11, H-1211, SF6, CH4 and H2 with two gas chromatographic channels and a CO2 sensor (LICOR). The measurements are supported by CO and O3 measurements of other instruments. Two campaigns were conducted to obtain measurements in the TTL: SCOUT-O3 (November/December 2005 in Darwin, Australia) and AMMA-SCOUT-O3 (August 2006 in Ouagadougou, Burkina Faso). After a general introduction of the thesis in chapters one and two, the third chapter describes the findings during this last campaign. Five local flights are analyzed to study the different transport processes that occur in the tropical tropopause layer above West-Africa: deep convection up to the level of main convective outflow, vertical mixing after overshooting of air in deep convection, horizontal inmixing from the extratropical lower stratosphere, and horizontal transport across the subtropical barrier. Main findings are that the TTL over West-Africa is mostly influenced by remote convection. The subtropical barrier is not a strong barrier but more a region of transition between the extratropical and the tropical stratosphere. Chapter 4 presents the results obtained during the SCOUT-O3 campaign. From the eight local flights the last four flights (051129, 051130a, 051130b, 051205) show enhanced values of ozone, CO and CO2 between 355 and 380 K potential temperature in comparison with the first four flights (051116, 051119, 051123, 051125). Horizontal inmixing from the extra-tropical stratosphere and influence of the local convective system Hector cannot explain the enhanced values of the two flights on 30 November Therefore, other possible explanations for these enhanced CO, CO2 and ozone levels are proposed. The first explanation is vertical mixing in the vicinity of the jet stream. However, the jet cannot explain the differences between the flights on 30 November and the flights on 29 November and 5 December. Another possible explanation is influence of polluted boundary layer air masses from the Indonesian region. Especially air sampled during the flights on November 30 crossed large parts of northern Indonesia between 8 and 10 days before the measurements. Convective uplift of biomass burning and other pollution plumes can transport CO and ozone precursors into the upper troposphere, where they can significantly enhance the ozone production. The last chapter deals with the vertical ascent rate in the TTL and uses measurements of both the SCOUT-O3 and AMMA-SCOUT-O3 campaign as well as data from previous aircraft campaigns (TROCCINOX and APE-THESEO). Time scales and residence times for mean vertical transport in the background TTL are estimated for different seasons and over different geographic regions using in situ observations of CO2 and long-lived tracers. The vertical transport time scales are constrained using the seasonal variation of CO2 in the tropical troposphere as a “tracer clock” for vertical ascent. Two methods are applied to calculate the residence time in the layer between 360 and 390 K potential temperature. The first method uses the slope of the CO2 index, the second method fits the CO2 index directly to the measurements assuming a constant ascent rate. The first method yields residence times for Australia,West Africa, and Brazil of the same order, 35-45 days to 380 K and 50 days to 390 K (where no value can be derived for Australia as the slope is changing approximately one month before the campaign). For APE-THESEO, the method does not yield reasonable results. The best estimates using the second method show moderate residence times between 360 and 390 K of 60±25 days SCOUT-O3 (NH autumn) and 43±8 days for AMMA/SCOUT-O3 (NH summer). These results agree well with the results calculated using the first method. For APE-THESEO and TROCCINOX the best fits yield shorter residence times of 23±7 and 40±10 days, respectively, both during winter. These results correspond well to the expectations based on the seasonal variation of the Brewer-Dobson circulation.
Within the present study the occurrence and fate of the organophosphorus flame retardants and plasticizers tris(2-chloroethyl) phosphate (TCEP), tris(2-chloro-1-methylethyl) phosphate (TCPP), tris(1,3-dichloro-2-propyl) phosphate (TDCP), tris(2-butoxyethyl) phosphate (TBEP), tri-iso-butyl phosphate (TiBP), and tri-n-butyl phosphate (TnBP) in precipitation, lake water, surface runoff and groundwater from urban and remote areas in Germany was investigated between June 2007 and October 2009. 255 samples of precipitation, 210 samples of lentic surface water and 72 samples of groundwater were analyzed for the six organophosphates (OPs) by solid phase extraction followed by gas chromatography-mass spectrometry. The research focused on aspects concerning (1) the atmospheric washout of OPs by precipitation, (2) the temporal variation of OP concentrations in precipitation and in lentic surface waters as well as (3) the pollution of groundwater by OPs. The results of the study emphasize the importance of precipitation as an all-season entry-pathway for OPs in the aquatic environment, particularly in densely populated urban environments with high traffic volume and abundant usage of flame-protected products. No seasonal trends were observed for all analytes in precipitation at the urban sampling site. TCPP dominated in all precipitation and storm water holding tank (SWHT) water samples with maximum levels exceeding 1 µg/L. An accumulation of OPs deposited in SWHTs was observed with concentrations often exceeding those observed in wet precipitation. Median concentrations of TCPP (880 ng/L), TDCP (13 ng/L), and TBEP (77 ng/L) at the urban SWHT were more than twice as high as those measured at the urban precipitation sampling site (403 ng/L, 5 ng/L, 21 ng/L) located close to the SWHT. OP levels in more remote lakes were often below or close to the limits of quantitation (LOQ). Nevertheless, TCPP was the substance with the highest median concentration in rural volcanic lakes (7–18 ng/L) indicating an atmospheric transport of the compound. At urban lakes the median OP concentrations were in the range of 23–61 ng/L (TCEP), 85–126 ng/L (TCPP), <LOQ–53 ng/L (TBEP), 8–10 ng/L (TiBP), and 17–32 ng/L (TnBP). In laboratory experiments, TBEP, TiBP, and TnBP were photochemically degraded in spiked lake water samples upon exposure to sunlight. In the SWHT a seasonal trend with decreasing concentrations in summer/autumn was evident for TiBP and TnBP but not for the chlorinated OPs. The decreasing concentrations can be explained by in-lake photodegradation. Results have also shown that the occurrence of OPs in groundwater is depending on the anthropogenic impact during groundwater recharge/natural replenishment. Infiltration of precipitation was found to be no important entry-pathway for OPs into aquifers at rural sites. Highest OP concentrations (>0.1 µg/L) were determined in groundwater polluted by percolating leachate from contaminated sites or groundwater recharged via bank filtration of OP-loaded recipients. Concentrations of TCEP, TCPP, TiBP and TnBP in groundwater decreased rapidly (89–97%) during bank filtration with increasing distance from the recipient due to adsorption processes and/or biotransformation. Although TCEP and TCPP are stable within the aquifer, they are not suitable as conservative organic tracers in groundwater.
The Alborz Mountains are forming a ~100 km wide, E-W trending mountain chain where individual summits are up to 5000 m in elevation. The Alborz Mountains range are part of the Alpine orogen and are straddling a 2000 km wide area S of the Caspian Sea. The rocks of the Alborz Mountains consist of Neogen sediments, which are affected by folding and faulting. In the western part of the Alborz Mountains the folds and faults are trending NW-SE, whereas in the eastern part they are trending NE-SW. GPS data confirm N-S shortening including dextral strike-slip along ESE-WNW trending faults, and sinistral strike-slip along ENE-WSW trending faults. The present thesis is focusing on the active Garmsar salt nappe, the fragmented roof of which is pierced by rock salt which extruded near the front of the Alborz Mountains Range. During the past 5 m.y. the front of the Alborz chain migrated towards SSW on top of the salt of the Garmsar basin. The salt was squeezed towards SSW and took place at the Great Kavir. The extruded salt is forming the Eyvanekey plateau between the cities of Eyvanekey and Garmsar. Both the Garmsar salt nappe and the Eyvanekey plateau are dextrally displaced for ca. 9 km along the Zirab-Garmsar fault. Structural analyses of the Garmsar salt nappe indicate three different groups of joints which are trending perpendicular and parallel to the local mechanical anisotropy. The folds of the study area are congruent (type 2 and 3 after Ramsay) resulting from viscose inhomogeneous flow. InSAR-Investigations suggest the Alborz Mountains to be lifted up by ca. 1 cm/a, while horizontal shortening is active at a rate of 8 ±2 mm/a. These values are consistent with GPS data. Based on nine „Advanced Synthetic Aperture Radar“ (ASAR) scenarios, produced by the ENVISAT satellite of the European space agency between 2003 and 2006, we used interferograms to map the displacement via 22 increments during 2 – 18 months. The results suggest that the topographic height of the surface of the salt is changing at a rate which is controlled by the season. The displacement ranges from subsidence at -40 to -50 mm/a to uplift of 20 mm/a. In order to investigate the time-dependent deformation with high spatial resolution, we used algorithms which are based on data of small base lines (SBAS). The resulting interferometric SAR time series analyses also suggest that the study area is largely subsiding at a rate that is controlled by the seasons. The map with the averaged LOS deformation velocities, on the other hand, suggests the subsidence to increase from the upper part of the salt nappe towards deeper topographic 5 levels of the agricultural lowlands. The major part of subsidence is probably caused by the annual rainfall which results in subrosion of salt. The spatial changes in the subsidence rate are probably controlled by the distribution of fountains, mining activity at the margin of the salt glacier, and faults and fractures inside the salt. Striking seasonal imprints are obvious along the agricultural areas which are surrounding the Garmsar salt nappe. These areas are rapidly subsiding in summer and spring when groundwater is used for irrigations. The maximum rate of subsidence (40-50 mm/a) is located E and W of the Eyvanekey plateau, where large areas are irrigated. The maximum displacement is 20 mm/a in the farmland and 5 mm/a in the center of the salt nappe. Depth estimates using Euler deconvolution method for gravimetric and magnetic data suggest the salt to extrude from a depth less than ca. 2000 m. The gravity field of the study area is characterized by strong anomalies in the SW and weak anomalies in the NE. A considerable negative anomaly in the N indicates that the northern part subsided, whereas the southern part was lifted up. The seismic data show three major horizons inside the Miocene sediments: the Lower Red Formation, the Qom Formation, and the Upper Red Formation. The western part of the study area seems to be free from salt domes. The layers of the upper part of the Qom Formation show thinning along the NE and NW trending faults. In some areas the seismic reflectors indicate steep faults close the saddle of the folds. NE-SW-, NW-SE and E-Wtrending faults prevail. Analogue experiments have been carried out to extend our knowledge about the evolution of the Garmsar salt dome. We used a scaled model (34 cm * 25 cm * 2.5 cm) that was shortened perpendicular to its long side. The wedge shape of the Alborz Mountains was simulated by a wedge consisting of Styrofoam. Rock salt was simulated using Polydimethylsiloxan (PDMS), a linear viscous material with a viscosity of 2.3*104 Pa s and a density of 0.96 g/cm3 at room temperature. Other sediments were modeled using dry quartz sand. The experimental results can be used to simulate the structural evolution of the study area: The Alborz deformation front was emplaced on top of the salt rocks in the Garmsar area while migrating towards SSW. A salt basin and a salt extrusion have also been produced in the model. Cross sections through the wedge shaped analogue model indicate N- and S-dipping reverse faults, which are in line with the wedge shape of the Alborz chain. Moreover, ENE-WSW trending sinistral and ESE-WNW trending dextral strike-slip faults led to N-S shortening during the Miocene. Structural marker horizons, 6 which have been turned into Z-folds on the western fold limbs and to S-folds on the eastern fold limbs, are comparable with the folds of the study area. Solving the problem of waste is one of the central tasks of environmental protection. It is becoming increasingly difficult to find suitable sites that are acceptable to the public. Salt and salt formations have relevant properties to be utilizing as a repository for each kind of waste. The favorable properties make rock salt highly suitable as a host rock, in particular for nonradioactive and radioactive wastes. The Qom and Garmsar basins are the nearest salt diapirs to the Tehran province, and there are suitable repositories for waste disposal. Based on surface and subsurface data, the Garmsar salt diapir has been investigated as a case example for its suitability as a host and repository for various types of waste. The data used are based on field studies, interferometry, and geophysical investigations. The results of this study suggest the deep bedded salt of the Garmsar Salt Basin to be an appropriate host for the deposition of industrial waste. Rock salt of surficial layers or domes, on the other hand, is not regarded as an appropriate candidate for waste disposal.
Until now, the NW Indian Ocean was sparsely covered with coral proxy records, and records from the Maldives Archipelago do not exist. The first such coral proxy record from the central Maldives is presented in this study. It originates from a massive Porites lutea (Quoy and Gaimard, 1833) colony that was sampled March 2007 in the lagoon of Rasdhoo Atoll (4°N/ 73°W), which is located in the central Maldives. The record spans a period of 90 yrs and reaches back to 1917 AD with monthly to bimonthly resolution. This study investigates temporal variations of the skeletal stable oxygen (delta18O) and carbon (delta13C) isotopes, the strontium-to-calcium (Sr/Ca), and the annual extension-rates, and their relationship to historical climate variations 1917-2007. Annual extension-rates show an increase over the 20th century, and are correlated with instrumental sea surface temperatures (SST). The interannual variation of the extension-rates within 2.5-4 years is driven by the El Niño-Southern Oscillation (ENSO). The amount of skeletal extension during the summer months is triggered by variations in the strength of the SW monsoon. Interannual and decadal variability in monsoon current activity (18-19 yrs) and rainfall over India are an expression of the summer monsoon strength. This is the reason why a statistical link between coral extension-rates and precipitation over India can be established. This implies that annual extension-rates in corals can be used as a new proxy for Indian monsoon variability on decadal resolution. The delta18O record exhibits the 20th century warming trend that is influenced by the effect of monsoon-induced cooling. delta18O also reveals interannual ENSO triggered variability, which is due to ENSO-forced variations in SST and sea surface salinity (SSS). A decadal variation at 12-14 yrs cannot be linked to SST variations in the NW Indian Ocean, but with decadal variations of SSS. They could be caused by ENSO- forced variations of the monsoon currents during the mature phase of ENSO teleconnections in the Indian Ocean in boreal winter. The Sr/Ca record does not indicate a significant warming, in spite of the observed SST rise at the sampling site. Changes in seawater Sr/Ca cannot be excluded. Nevertheless, interannual ENSO forcing is still evident. Evidence for the Pacific Decadal Oscillation (PDO) is found during 1917-1955. Afterwards, the Sr/Ca data indicate the disappearance of PDO forcing. By the combination of Sr/Ca and delta18O it is possible to detect ~80% of historical El Niño and La Niña events at the sample site. This study confirms the notion that interannual to multi-decadal climate fluctuations in the Pacific play a crucial role for climate variability in the Indian Ocean.
Die vorliegende Arbeit wurde im Rahmen des Forschungsprojekts „Integrierte Analyse von mobilen, organischen Fremdstoffen in Fließgewässern“ (INTAFERE) am Institut für Physische Geographie an der Goethe-Universität Frankfurt erstellt. In INTAFERE wurde das Gefährdungspotenzial von mobilen, organischen Fremdstoffen (MOF) für aquatische Ökosysteme und die natürlichen Wasserressourcen in integrierter und partizipativer Art und Weise untersucht. MOF sind chemische Substanzen, die in Alltagsprodukten enthalten sind und durch unterschiedliche Eintragsfade in unbekannten Mengen in Oberflächengewässer eingetragen werden. Problematisch sind aus Umweltgesichtspunkten ihre Eigenschaften: sie besitzen im Wasser eine hohe Mobilität und sind schwer abbaubar. Dies führt zu einer Persistenz über lange Zeiträume. Für einige dieser Substanzen wurde zudem gezeigt, dass sie in sehr geringen Konzentrationen biologisch aktiv sind und für aquatische Ökosysteme eine Gefahr darstellen. In INTAFERE wurden drei zentrale Ziele verfolgt: Charakterisierung des Problemfeldes MOF, Erzeugung von praxisrelevantem Wissen für das Management von MOF und Entwicklung einer Softwareanwendung, die gesellschaftliche Aushandlungsprozesse durch eine transparente Darstellung der Wirkungszusammenhänge im Problemfeld unterstützt. Um einen Beitrag für die Erfüllung der Ziele zu leisten, war es die Aufgabe der Verfasserin, eine Akteursanalyse und -modellierung durchzuführen sowie Zukunftsszenarien im Bereich der MOF zu entwickeln. Dafür existierte keine adäquate Methodik, daher verfolgt die Dissertation zum einen die Entwicklung einer Methodik und zum anderen deren Anwendung im Kontext des Projektes INTAFERE. Da im Forschungsprozess die Durchführung von Analysen, die wissenschaftliche und gesellschaftliche Sichtweise der Problematik sowie die Erarbeitung von praktischen Lösungen im Mittelpunkt standen, wurde eine transdisziplinäre Herangehensweise gewählt. Ziel war es, eine Methodik zu entwerfen, die sowohl eine Entwicklung von Szenarien als auch eine Modellierung von Handlungsentscheidungen umfasst. Eine Modellierung und Visualisierung von Handlungsentscheidungen ist notwendig, um Strategien für ein Umweltproblem für verschiedene Szenarien zu ermitteln, und damit einen Lernprozess der Stakeholder zu initiieren. Dies wurde mit der transdisziplinären Methode „Akteursbasierte Modellierung“ umgesetzt. Hierbei wurden insbesondere Aspekte der Problemwahrnehmung von Akteuren und deren Darstellung, der partizipativen Szenarienentwicklung sowie der semi-quantitativen Modellierung von Handlungsentscheidungen berücksichtigt. Die Verfasserin hat mit der semi-quantitativen akteursbasierten Modellierung eine Methode erarbeitet und getestet, die bisher unverbundene Komponenten (wie die Software Dynamic Actor Network Analysis (DANA) und die Szenarienentwicklung) zusammenführt. Um Handlungsentscheidungen unter verschiedenen Szenarien zu modellieren hat die Autorin eine sequentielle Modellierung entwickelt, die mit der Software DANA durchgeführt werden kann. Die dafür notwendige Weiterentwicklung von DANA wurde von Dr. Pieter Bots (TU Delft) umgesetzt. Die akteursbasierte Modellierung läuft in drei methodischen Schritten ab: 1. Modellierung von Akteurs-Sichtweisen in Form von Wahrnehmungsgraphen und deren Analyse, aufbauend auf Ergebnissen von qualitativen, leitfaden-gestützten Expertengesprächen (= Akteursmodellierung), 2. partizipative Szenarienentwicklung mit den Akteuren und 3. Zusammenführung der Ergebnisse der Akteursmodellierung und der Szenarienentwicklung und darauf aufbauend eine sequentielle Modellierung von Handlungsentscheidungen und deren Auswirkungen auf Schlüsselfaktoren. Im Zuge der Anwendung auf das Problemfeld der MOF wurde für folgende Akteure jeweils ein Wahrnehmungsgraph modelliert: Obere Wasserbehörde, Umweltbundesamt, Umwelt- und Verbraucherschutzorganisationen, Wasserversorger sowie für die Hersteller von verschiedenen MOF, weiterhin für die European Flame Retardants Association und die Weiterverarbeitende Industrie. Das Ergebnis der Szenarienentwicklung waren vier Szenarien: ein Gesundheitsszenario, unter der Annahme von hohen lokalen Umweltstandards durch nachhaltigkeitsorientierte KonsumentInnen, ein Umweltszenario, in dem eine starke Regulierung und nachhaltigkeitsorientierter Konsum Hand in Hand gehen, ein Globalisierungsszenario, in dem Wirtschaftsmacht und preisbewusste KonsumentInnen statt staatliche Regulierung vorherrschen und ein Technikszenario, unter der Annahme, dass Kläranlagen, bedingt durch eine starke Regulierung, aufgerüstet werden. Bei der Modellierung von Handlungsentscheidungen wurden die Wahrnehmungsgraphen und die vier Szenarien miteinander verknüpft. Pro Substanz wurde ein Modell entwickelt, welches die wichtigsten Systemkomponenten in einer angemessenen Komplexität umfasst und die von den Akteuren gemeinsam getragene Einschätzung der Wirkungsbeziehungen darstellt. Insgesamt wurden 16 Modelle entwickelt. Basierend auf den simulierten Akteurshandlungen wurden relativen Veränderungen der Schlüsselfaktoren Produktion, Import und Leistungsfähigkeit der Kläranlagen für die vier genannten Szenarien berechnet. In Zusammenarbeit mit Pieter Bots konnten algorithmische Beiträge zur Analyse- und Modellierungssoftware DANA getestet und verbessert werden. Da keine vollständige und zugleich leicht verständliche Einführung zu DANA vorlag, wurde für Nutzer im Rahmen dieser Dissertation eine Anleitung verfasst, die die Modellierung von Wahrnehmungsgraphen und deren Analyse sowie alle Schritte der akteursbasierten Modellierung mit DANA erläutert.