Refine
Year of publication
- 2009 (158) (remove)
Document Type
- Article (81)
- Doctoral Thesis (69)
- Book (5)
- Report (3)
Has Fulltext
- yes (158)
Is part of the Bibliography
- no (158) (remove)
Keywords
- Gentherapie (3)
- ADC (2)
- Biochemie (2)
- Crystallography (2)
- HIV (2)
- Kraftmikroskopie (2)
- Licht-Sammel-Komplex (2)
- Ligand <Biochemie> (2)
- Membranproteine (2)
- Quantenchemie (2)
Institute
- Biochemie und Chemie (158) (remove)
Enantioselective carbon-carbon bond-forming reactions, particularly, using organocatalysts represent one of the most important areas in modern synthetic chemistry. New concepts and methods in organocatalysis are emerging continuously, allowing more selective, economically more appealing and environmentally friendlier transformations. Chiral Brønsted-acid catalysts have recently emerged as a new class of organocatalysts for a number of enantioselective carbon-carbon bond-forming reactions. The first part of this thesis focused on the new development of new Brønsted acid-catalyzed enantioselective Nazarov cyclizations. The Nazarov reaction belongs to the group of electrocyclic reactions and is one of the most versatile methods for the synthesis of five-membered rings, which are the key structural elements of numerous natural products. In general, the Nazarov cyclization can be catalyzed by Brønsted or Lewis acids. However, only a few asymmetric variations have been described, of which most require the use of large amounts of chiral metal complexes. The reactivities of Nazarov cyclizations are also depending on the substituents of the divinyl ketone substrates as described in the first chapter. The substrates to study Brønsted acid-catalyzed enantioselective Nazarov cyclization were prepared following the known procedures. The dihydropyran was treated with tBuLi in THF at –78 oC and then the α,β-unsaturated aldehydes 1 were added to the reaction mixture to afford the corresponding alcohols 2 in moderate to good yields. The alcohols 2 were oxidized to divinyl ketones 3 employing Dess-Martin periodinane/pyridine (DMP/py) in CH2Cl2 at room temperature to obtain the divinyl ketones 3 in moderate to good yields (Scheme 1). Scheme 1. Preparation of substrates in order to study Brønsted acid-catalyzed enantioselective Nazarov cyclization and subsequent transformations. At the starting point, an evaluation of suitable Brønsted acid catalysts for the enantioselective Nazarov cyclization of divinyl ketone 3a was performed. The initial reactions conducted with various BINOL-phosphoric acids 4a-4e in toluene at 60 oC provided the mixture of cis and trans cyclopentenones 5a with enantioselectivities of up to 82% ee (Table 1, entries 1-5). Eventually, improved reactivity could be achieved by using the corresponding N-triflylphosphoramides 4f and 4g, which even at 0 oC gave complete conversion after ten minutes. Additionally, it was shown that the use of these catalysts significantly enhanced both the diastereoselectivity (cis/trans ratio up to 7:1) and the enantioselectivity (up to 96% ee; Table 1, entries 6 and 7). Table 1. Evaluation of Brønsted acids 4a-4g in the enantioselective Nazarov cyclization. The scope of the Brønsted acid-catalyzed enantioselective Nazarov cyclization of various divinyl ketones 3 was explored under an optimized reaction condition (Scheme 2). Treatment of divinyl ketones 3 in CHCl3 in the presence of 2 mol% chiral BINOL-Ntriflylphosphoramide 4g at 0 oC for 1-6 h provided the corresponding cyclopentenone 5 in good yields (45-92%) with excellent enantioselectivities (up to 93% ee) (Scheme 2). Furthermore, the isomerization of cis-cyclopentenone under basic condition led to the corresponding trans-cyclopentenone without loss of enantiomeric purity. This efficient method introduced here was not only the first example of an organocatalytic electrocyclic reaction but also represented the first enantioselective activation of a carbonyl group catalyzed by a chiral BINOL phosphoric acid. Compared to the metal-catalyzed reaction, special features of this new Brønsted acid-catalyzed electrocyclization are the lower catalyst loadings (2 mol%), higher enantioselectivities, accessibility to all possible stereoisomers, as well as the mild conditions. ....
Die 5-Lipoxygenase (5-LO) ist das Schlüsselenzym in der Biosynthese proinflammatorischer Leukotriene, die maßgeblich an der Entstehung allergischer und entzündlicher Erkrankungen wie Arthritis, Asthma und kardiovaskulären Erkrankungen beteiligt sind (23). Humane 5-LO besteht aus 673 Aminosäuren und besitzt ein Molekulargewicht von 77,8 kDa (25). Das Protein besteht aus einer größeren katalytischen Domäne, die ein zentrales Eisen(II)-Atom enthält, dass für die zweistufige LTA4-Bildung aus Arachidonsäure benötigt wird, und einer kleineren C2-ähnlichen Domäne, die Bereiche für die Membran- sowie Ca2+-Bindung enthält. Durch Stimulation von intakten Zellen kommt es zu einer Translokation der 5-LO an die Kernmembran. Die Wechselwirkung mit dem membranständigen FLAP fördert die 5-LO-Leukotrienbildung. Die vorliegende Arbeit beschäftigte sich mit niedermolekularen Modifikationen der 5-LO durch U-73122 und Glutathion sowie mit der Charakterisierung von 5-LO-Inhibitoren. U-73122 ist ein Inhibitor, der in vitro und in vivo mit einem IC50-Wert von 30 nM bzw. 2,4 µM die 5-LO-Aktivität hemmt (2). U-73122 verfügt über eine thiol-reaktive Maleinimid-Gruppe, wodurch die Substanz kovalent an einige 5-LO-Cysteine (Cys-99, -159 und weitere) binden kann. Entsprechende U-73122-5-LO-Peptide konnten nach Trypsin-Verdau der 5-LO mit MALDI-MS-Messungen nachgewiesen werden. Für diesen Zweck musste eine effiziente Aufreinigung für native 5-LO (Reinheit > 95%) entwickelt werden. Um die Veränderung der 5-LO-Aktivität nach U-73122-Zugabe zu untersuchen, wurden Cystein/Serin-5-LO-Mutanten hergestellt. Es konnte festgestellt werden, dass die Mutante C416S-5-LO nicht mehr effektiv durch U-73122 gehemmt werden konnte. Daher ist anzunehmen, dass U-73122 an Cystein-416 der 5-LO bindet und die 5-LO-Produktbildung hemmt. Auf der 5-LO-Oberfläche kann ein Bereich lokalisiert werden, der einen Zugang für das Substrat zum aktiven Zentrum der 5-LO bilden könnte (238,239). Dieser Bereich liegt in unmittelbarer Nähe zu Cystein-416. Daher besteht die Möglichkeit, dass U-73122, nachdem es an Cystein-416 gebunden hat, diesen Bereich hemmend beeinflussen kann. Es konnte nachgewiesen werden, dass Glutathion an mehrere Cysteine der 5-LO (Cystein-99, -264 und -449) kovalent binden kann. Um Veränderungen der 5-LO-Aktivität durch in vivo Glutathionylierungen zu zeigen, wurden HeLa-Zellen mit 5-LO, Cystein-/Serin-5-LO-Mutanten sowie FLAP transfiziert und mit Diamid inkubiert. Es konnte festgestellt werden, dass die native sowie FLAP-gesteigerte 5-LO-Produktbildung durch Diamid gehemmt wird. Dies konnte ebenfalls für die Mutante 3W-5-LO beobachtet werden. Zusätzlich wurden verschiedene Cystein-/Serin-5-LO-Punktmutanten sowie eine 4fach Mutante (C159S/C300S/C416S/C418S-5-LO = 2D-5-LO) untersucht. Das Verhalten dieser Mutanten konnte in drei Gruppen eingeteilt werden. Gruppe A (C159S-, C300S- und C418S-5-LO) wurde durch Diamid nicht beeinflusst. Gruppe B (C416S- und 2D-5-LO) zeigte eine sehr starke Stimulation der 5-LO±FLAP-Leukotrienbildung nach Zugabe von Diamid. Bei Gruppe C (C99S-, C264S- und C449S-5-LO) konnte eine FLAP-gesteigerte 5-HETE-Bildung beobachtet werden. Durch Diamid kommt es zu Glutathionylierungen von zellulären Proteinen, da reduziertes Glutathion (GSH) zu reaktiveren oxidierten Glutathion (GSSG) umgesetzt wird. An der 5-LO-Oberfläche können in Folge an verschiedenen Cysteinen Glutathione binden. Durch die Glutathion-Bindung wird eine stark polare Struktur auf der 5-LO-Oberfläche eingebracht. Dadurch kommt es zu einer verminderten Membranbindung und Produktbildung der nativen 5-LO. Die 5-LO-Oberfläche der 2D-5-LO-Mutante kann an verschiedenen Positionen keine Glutathione mehr binden, es kommt es zu einer stärkeren Wechselwirkung mit Membranbestandteilen und zu einer erhöhten 5-LO-Leukotrienbildung. Für Celecoxib konnte gezeigt werden, dass neben der COX2-Hemmung auch die 5-LO-Aktivität mit einem IC50-Wert von 3-10 µM gehemmt werden kann (268). Im Rahmen dieser Arbeit wurden HeLa-Zellen mit 5-LO±FLAP transfiziert, um den Einfluss von Celecoxib auf FLAP zu untersuchen. Celecoxib führt zu einer direkten Hemmung der 5-LO. ML3000 (Licofelon) wurde als dualer COX/5-LO-Inhibitor entwickelt und hemmt die 5-LO-Aktivität in intakten Zellen, aber nicht im Homogenat. Daher wurden Versuche mit 5-LO±FLAP-tranfizierten HeLa-Zellen durchgeführt, um den Einfluss von ML3000 auf die FLAP-gesteigerte 5-LO-Leukotrienbildung zu zeigen. Aus diesen und weiteren Ergebnissen unserer Arbeitsgruppe konnte gefolgert werden, dass ML3000 ein FLAP-Inhibitor ist (277). Garsubellin A ist strukturverwandt zu Hyperforin, einem dualen COX/5-LO-Inhibitor (204). Garsubellin A hemmt die 5-LO-Aktivität im Homogenat von PMNL und am gereinigten Enzym mit einer IC50 von 10-30 µM. Verbindungen, die den Bicyclo[3.3.1]nonan-Grundkörper des Garsubellin A und Hyperforin enthalten, wurden auf ihr inhibitorisches Potential getestet. Es konnte gezeigt werden, dass der Bicyclo[3.3.1]nonan-Grundkörper alleine nicht für eine 5-LO-Hemmung ausreicht, sondern eine freie Carbonsäure sowie eine bis zwei Prenylierungen vorliegen müssen, um eine 5-LO-Hemmung zu erzielen. Sind diese Voraussetzungen vorhanden, wird die 5-LO-Aktivität in intakten PMNL mit einer IC50 von 10 µM und an gereinigter 5-LO mit 0,3-1 µM gehemmt.
We developed the Pharmacophore Alignment Search Tool (PhAST), a text-based technique for rapid hit and lead structure searching in large compound databases. For each molecule, a two-dimensional graph of potential pharmacophoric points (PPPs) is created, which has an identical topology as the original molecule with implicit hydrogen atoms. Each vertex is coloured by a symbol representing the corresponding PPP. The vertices of the graph are canonically labelled. The symbols associated with the vertices are combined to a so-called PhAST-Sequence beginning with the vertex with the lowest canonical label. Due to the canonical labelling the created PhAST-Sequence is characteristic for each molecule. For similarity assessment, PhAST-Sequences are compared using the sequence identity in their global pairwise alignment. The alignment score lies between 0 (no similarity) and 1 (identical PhAST-Sequences). In order to use global pairwise sequence alignment, a score matrix for pharmacophoric symbols was developed and gap penalties were optimized. PhAST performed comparably and sometimes superior to other similarity search tools (CATS2D, MOE pharmacophore quadruples) in retrospective virtual screenings using the COBRA collection of drugs and lead structures. Most importantly, the PhAST alignment technique allows for the computation of significance estimates that help prioritize a virtual hit list.
Molecules of the title compound, C40H42BrNO6, are located on a crystallographic twofold rotation axis. As a result, the nitro group and bromine residue are mutually disordered with equal occupancies. The propoxy-substituted aromatic rings are close to parallel to each other [dihedral angle = 21.24 (1)°], whereas the propenoxy-substituted rings enclose a dihedral angle of 70.44 (1)°. The dihedral angles between the methylene C atoms and the aromatic rings shows that the propenoxy substituted rings are bent away from the calixarene cavity [dihedral angle between the planes = 35.22 (8)°], whereas the propoxy-substituted rings are almost perpendicular [79.38 (10)°] to the plane of the methylene C atoms. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(C–C) = 0.006 A° ; disorder in main residue; R factor = 0.065; wR factor = 0.130; data-to-parameter ratio = 11.8.
The transporter associated with antigen processing (TAP) is an essential machine of the adaptive immune system that translocates antigenic peptides from the cytosol into the endoplasmic reticulum lumen for loading of major histocompatibility class I molecules. To examine this ABC transport complex in mechanistic detail, we have established, after extensive screening and optimization, the solubilization, purification, and reconstitution for TAP to preserve its function in each step. This allowed us to determine the substrate-binding stoichiometry of the TAP complex by fluorescence cross-correlation spectroscopy. In addition, the TAP complex shows strict coupling between peptide binding and ATP hydrolysis, revealing no basal ATPase activity in the absence of peptides. These results represent an optimal starting point for detailed mechanistic studies of the transport cycle of TAP by single molecule experiments to analyze single steps of peptide translocation and the stoichiometry between peptide transport and ATP hydrolysis.
PERIOD proteins are central components of the Drosophila and mammalian circadian clocks. The crystal structure of a Drosophila PERIOD (dPER) fragment comprising two PER-ARNT-SIM (PAS) domains (PAS-A and PAS-B) and two additional C-terminal alpha-helices (alphaE and alphaF) has revealed a homodimer mediated by intermolecular interactions of PAS-A with tryptophane 482 in PAS-B and helix alphaF. Here we present the crystal structure of a monomeric PAS domain fragment of dPER lacking the alphaF helix. Moreover, we have solved the crystal structure of a PAS domain fragment of the mouse PERIOD homologue mPER2. The mPER2 structure shows a different dimer interface than dPER, which is stabilized by interactions of the PAS-B beta-sheet surface including tryptophane 419 (equivalent to Trp482dPER). We have validated and quantitatively analysed the homodimer interactions of dPER and mPER2 by site-directed mutagenesis using analytical gel filtration, analytical ultracentrifugation, and co-immunoprecipitation experiments. Furthermore we show, by yeast-two-hybrid experiments, that the PAS-B beta-sheet surface of dPER mediates interactions with TIMELESS (dTIM). Our study reveals quantitative and qualitative differences between the homodimeric PAS domain interactions of dPER and its mammalian homologue mPER2. In addition, we identify the PAS-B beta-sheet surface as a versatile interaction site mediating mPER2 homodimerization in the mammalian system and dPER-dTIM heterodimer formation in the Drosophila system.
In the title compound, C11H14O4, an intermediate for the synthesis of a new kind of estrogen receptor modulator, all non-H atoms lie on a common plane (r.m.s. deviation = 0.0472 Å). All C-C bonds in the side chain are in a trans conformation, and the hydroxyl group is also trans to the methylene chain. In the crystal structure, molecules form centrosymmetric dimers showing a head-to-head arrangement which is stabilized by O-H...O hydrogen bonds. A weak C-H...O contact is also present.
Tumoren epithelialen Ursprungs weisen häufig eine vermehrte Expression und/oder Mutationen des epidermalen Wachstumsfaktor-Rezeptors (EGFR) auf. Durch die übermäßig starke bzw. permanente Vermittlung von Überlebens- und Proliferationssignalen an die betroffene Zelle trägt dies direkt zum Voranschreiten der Tumorerkrankung bei. Für eine Reihe von Tumorentitäten ist bekannt, dass eine abnorme Expression von EGFR mit einer schlechteren Prognose für den Krankheitsverlauf und die mittlere Überlebenszeit betroffener Krebspatienten korreliert. Begleitend zur systemischen Chemotherapie solcher Tumoren wird eine gerichtete Therapie zur Eindämmung der EGFR-vermittelten Signaltransduktion durch den Einsatz von Tyrosinkinase-Inhibitoren (TKI) oder EGFR-spezifischer monoklonaler Antikörper (mAb) erzielt. Bei der therapeutischen Anwendung monoklonaler anti-EGFR Antikörper wurden in einigen Fällen lediglich milde Nebenwirkungen wie z.B. Hautausschläge beobachtet, wobei das Auftreten dieser Effekte mit dem Therapieerfolg korrelierte. Eine Reihe von monoklonalen Antikörpern, die gegen ErbB Rezeptor-Tyrosinkinasen gerichtet sind, sind mittlerweile zur Tumortherapie zugelassen, darunter der chimäre anti-EGFR Antikörper Cetuximab (Erbitux®, ImClone/BMS/Merck) zur Behandlung von metastasierenden Kolonkarzinomen sowie Karzinomen des Kopf- und Halsbereichs, der humane anti-EGFR Antikörper Panitumumab (Vectibix®, Amgen) bei metastasierenden Kolonkarzinomen, und der humanisierte anti-ErbB2 Antikörper Trastuzumab (Herceptin®, Genentech/Roche) bei Brustkrebs. Weitere Antikörper befinden sich derzeit in fortgeschrittenen Phasen der klinischen Entwicklung, darunter der humanisierte anti-EGFR Antikörper Matuzumab (Merck/Takeda). Klinische Daten zeigen, dass Patienten mit EGFR positiven Tumoren, die gegenüber etablierter Chemotherapie resistent sind, von der Behandlung mit anti-EGFR Antikörpern profitieren. Durch aktivierte EGF-Rezeptoren induzierte mitogene Signale werden vermindert bzw. blockiert, indem die Antikörper mit hoher Affinität an ErbB Rezeptoren auf der Zelloberfläche binden und die Ligandenbindung bzw. die Dimerisierung verhindern, die zur Bildung aktivierter Rezeptor Dimere nötig ist. Auf diese Weise wird die mitogene Signalübertragung aktivierter ErbB-Rezeptor Dimere verhindert und die Proliferation der Tumorzelle wird verlangsamt oder kommt zum Stillstand. Es gibt Hinweise, dass darüber hinaus sekundäre Effektormechanismen des Immunsystems wie die antikörperabhängige zellvermittelte Zytotoxizität (ADCC) oder die komplementabhängige Zytotoxizität (CDC) gegen Antikörper-markierte Tumorzellen die anti-tumorale Wirksamkeit dieser Antikörper noch verstärken. Die lebensverlängernde Wirkung der Behandlung mit diesen Antikörpern ist ein Beispiel für die erfolgreiche Anwendung einer zielgerichteten Krebstherapie durch passive Immuntherapie. Zu Beginn dieser Arbeit waren die genauen Bindungsstellen der therapeutischen anti-EGFR Antikörper Cetuximab und Matuzumab noch unbekannt. Die Kenntnis der Lage der Epitope auf dem EGFR Molekül könnte wichtige Hinweise zur Aufklärung der Wirkungsmechanismen dieser Antikörper liefern und Ansätze zur weiteren Optimierung dieser Therapeutika aufzeigen. Aus vorangegangenen Experimenten war bekannt, dass Cetuximab und Matuzumab Epitope auf dem EGFR erkennen, die eine intakte Raumstruktur des Rezeptors voraussetzen. Diese Beobachtungen konnten in dieser Arbeit bestätigt werden, ferner konnte die Lage der Epitope auf die EGFR Ektodomäne III/L2 eingegrenzt werden. Da sowohl Cetuximab als auch Matuzumab nicht-lineare, konformationelle Epitope erkennen, wurde eine Variante der Phage Display Methode zur Identifizierung von Peptiden gewählt, die mit den hypervariablen Regionen (CDR) dieser Antikörper interagieren, welche die Bindungsspezifität der Antikörper vermitteln. Ziel dieser Experimente war die Identifizierung von Peptiden, welche die konformationellen Epitope von Cetuximab bzw. Matuzumab in linearer bzw. zyklisch restringierter Form nachbilden. Die Aminosäuresequenzen solcher sogenannter Mimotope könnten zur Identifizierung entsprechender Oberflächenstrukturen am EGFR Molekül herangezogen werden. In der vorliegenden Arbeit wurden aus kommerziell erhältlichen Bibliotheken genetisch modifizierter M13 Bakteriophagen, die randomisierte lineare bzw. zyklische Peptide als N-terminale Fusion am Oberflächenprotein pIII exponieren (M13KE), unter Anwendung der „Delayed Infectivity Panning“ (DIP) Methode Peptide angereichert, die von Cetuximab bzw. Maztuzumab erkannt werden. Zur Anreicherung von M13KE Bakteriophagen mit CDR-spezifischen Fusionspeptiden mittels DIP wurde zunächst ein „single-chain“ Antikörperfragment aus der cDNA von Matuzumab konstruiert und in den bakteriellen Expressionsvektor pIB-Tx kloniert. Mit dem resultierenden Konstrukt pIB-Tx-scFv(E72K) bzw. dem bereits vorhandenen analogen Konstrukt pIB-Tx-scFv(225), welches das „single-chain“ Antikörperfragment von Cetuximab enthält, wurden E. coli HB101 Bakterien transformiert, um die bakterielle Oberflächenexpression dieser Antikörperfragmente zum Einsatz in DIP Experimenten zu erreichen. In alternierenden positiven und negativen Selektionsrunden wurden unter Einsatz dieser scFv-exprimierenden E. coli HB101 Bakterien in Biopanning Experimenten Phagen mit solchen Fusionspeptiden angereichert, die selektiv an die „single-chain“ Antikörperfragmente von Cetuximab bzw. Matuzumab binden. Phagen ELISA Experimente mit M13KE Einzelklonen zeigten, dass aus allen eingesetzten Bibliotheken Phagen mit Fusionspeptiden isoliert werden konnten, die an den jeweiligen parentalen Antikörper des zur Selektion eingesetzten „single-chain“ Antikörperfragmentes binden. Ein Teil der Phagenklone wies eine zumindest partielle Kreuzreaktivität zu dem entsprechenden anderen anti-EGFR Antikörper auf, obwohl sie auf Bindung an diesen nicht selektioniert worden waren. Die Sequenzanalyse der Fusionspeptide lieferte keine gemeinsame Consensus Sequenz, es konnten jedoch kurze, gemeinsame Sequenzmotive identifiziert werden. In MTT-Zytotoxizitätsassays wurden diese Klone als mögliche Kompetitoren der Bindung des gegen EGFR gerichteten Immuntoxins scFv(225)-ETA in MTT-Zytotoxizitätsassays eingesetzt. Ein Teil der selektionierten Fusionspeptide war in der Lage, die Bindung der aus dem „single-chain“ Antikörperfragment von Cetuximab scFv(225) bestehenden Zellbindungsdomäne des Immuntoxins scFv(225)-ETA an EGFR exprimierende Zellen zu kompetieren. Auch für einige Fusionspeptide, die zunächst nur auf Bindung an Matuzumab selektioniert worden waren, wurde dies beobachtet. Peptide, welche die Bindung des Immuntoxins an EGFR kompetieren, weisen in ihren pIII-Fusionspeptiden laut Sequenzanalyse die gemeinsamen Sequenzmotive KTL bzw. YPLG auf. Nach einem Abgleich der Sequenzen der kompetierenden, kreuzreaktiven Peptide mit KTL bzw. YPLG Motiven wurden zwei Peptide ausgewählt und zur Immunisierung von Kaninchen eingesetzt. In MTT-Zytotoxizitätsassays wurde zunächst bestätigt, dass die synthetischen Peptide in der Lage sind, durch Kompetition spezifisch die Bindung des gegen EGFR gerichteten Immuntoxins scFv(225)-ETA und dessen zytotoxische Wirkung auf EGFR exprimierende Zellen zu verhindern. Kaninchenseren und aus diesen affinitätsgereinigte anti-Peptid Antikörper zeigten in ELISA Experimenten konzentrationsabhängige Bindung an die immobilisierten synthetischen Peptide. Die Bindung der anti-EGFR Antikörper Cetuximab und Matuzumab an die synthetischen Peptide konnte ebenfalls bestätigt werden. In einer Reihe von Experimenten wurde untersucht, ob die Immunisierung mit potentiellen Mimotopen der anti-EGFR Antikörper eine endogene humorale Immunantwort gegen den humanen EGFR bewirkt hatte. Die Bindung der affinitätsgereinigten anti-Peptid Antikörper an den Rezeptor auf der Oberfläche EGFR-exprimierender Tumorzellen wurde zunächst in Durchflusszytometrie (FACS) Experimenten analysiert. Für die gereinigten anti-Peptid Antikörper wurde spezifische Bindung an murine Renca-lacZ/EGFR Zellen sowie an humane A431 Vulvakarzinomzellen detektiert, die den humanen EGFR auf der Oberfläche exprimieren. Die Bindung an A431 konnte durch Vorinkubation der Antikörper mit einem Überschuss der entsprechenden synthetischen Peptide vollständig verhindert werden. In einer weiteren Serie von FACS Experimenten konnte gezeigt werden, dass die Bindung der Antikörper Cetuximab und Matuzumab an EGFR durch eine Vorinkubation von Renca-lacZ/EGFR Zellen mit den gereinigten anti-Peptid Antikörpern deutlich reduziert werden konnte. Dies ist ein Beweis für die Fähigkeit der in Immunisierungsexperimenten generierten anti-Peptid Antikörper, die Bindungsstellen von Cetuximab und Matuzumab am EGFR zumindest teilweise zu besetzen. Diese Beobachtungen zeigen, dass durch Immunisierung mit den hier ausgewählten synthetischen Peptiden in Versuchstieren die Bildung von Antikörpern mit ähnlichen Eigenschaften wie Cetuximab bzw. Matuzumab und somit eine endogene Immunantwort gegen den humanen EGFR ausgelöst werden konnte. In Immunfluoreszenz Experimenten wurde die Bindung der anti-Peptid Antikörper an Renca-lacZ/EGFR Zellen erneut überprüft und mittels konfokaler Laser Scanning Mikroskopie (CLSM) visualisiert. In diesen Experimenten wurde für gereinigte anti-Peptid Antikörper (KTL Motiv bzw. YPLG Motiv) Bindung an die Zelloberfläche bzw. membrannahe intrazelluläre Strukturen beobachtet, die der Lokalisierung der Bindungssignale der parallel getesteten anti-EGFR Antikörper Cetuximab, Matuzumab und dem murinen anti-EGFR Antikörper R-1 entsprach. Die Bindung der anti-Peptid Antikörper konnte durch Zugabe eines Überschusses der jeweiligen synthetischen Peptide verhindet werden. In einer weiteren Serie von Immunfluoreszenz Experimenten wurde der humane EGFR auf Renca-lacZ/EGFR Zellen gleichzeitig mit anti-KTL bzw. anti-YPLG Peptid Antikörpern aus Kaninchen sowie dem murinen anti-EGFR Antikörper R-1 detektiert. Durch eine Überlagerung der Signale konnte eindeutig eine Kolokalisation nachgewiesen werden. Dies ist ein Beweis dafür, dass es sich bei der Bindung der anti-Peptid Antikörper an die Oberfläche von Renca-lacZ/EGFR um Bindung an den humanen EGFR handelt. In Lysaten von EGFR exprimierenden Zelllinien konnte mit gereinigten anti-Peptid Antikörpern ein Protein detektiert werden, dessen Größe dem humanen EGFR entspricht. Die durch Stimulation des humanen EGFR mit dem natürlichen Peptidliganden EGF hervorgerufene Autophosphorylierung des Rezeptors in A431 Zellen konnte durch Zugabe von anti-Peptid Antikörpern teilweise inhibiert werden, allerdings nicht in dem gleichen Ausmaß, wie dies für die als Positivkontrollen eingesetzten anti-EGFR Antikörper Cetuximab und Matuzumab beobachtet wurde. In MTT-Zytotoxizitätsassays konnte darüber hinaus eine teilweise Kompetition der Bindung des rekombinanten Toxins TGF!-ETA an EGFR-exprimierende A431 Zellen, und somit eine teilweise Kompetition des natürlichen Peptidliganden TGF! an EGFR durch Vorinkubation mit anti-Peptid Antikörpern nachgewiesen werden. Zur näherungsweisen Quantifizierung der Affinitäten der anti-Peptid Antikörper und der anti-EGFR Antikörper Cetuximab und Matuzumab für die synthetischen Peptide (KTL Motiv und YPLG Motiv) bzw. für die gereinigte extrazelluläre Domäne des humanen EGFR (sEGFR) wurden ELISA Bindungstests durchgeführt. Die aus den Bindungskurven berechneten Affinitätswerte zeigen, dass die anti-Peptid Antikörper an sEGFR im nanomolaren Bereich binden und damit ca. 200-fach niedrigere Affinitäten für den Rezeptor besitzen als die affinitätsoptimierten anti-EGFR Antikörper Cetuximab bzw. Matuzumab. Die Affinitäten der anti- Peptid Antikörper für die synthetischen Peptide liegen ebenfalls im nanomolaren Bereich, während Cetuximab und Matuzumab lediglich mikromolare Affinitäten für die Peptide besitzen. Durch „Epitope Mapping“ in silico vorhergesagte mögliche Oberflächenstrukturen auf EGFR, welche die Peptidmimotope mit KTL bzw. YPLG Motiven nachbilden, sind direkt benachbart zu den mittlerweile publizierten Bindungsstellen von Matuzumab und Cetuximab bzw. EGF in der Ektodomäne III/L2 von EGFR (Li et al., 2005; Schmiedel et al., 2008) und zeigten im Falle des Peptides mit KTL Motiv Übereinstimungen mit Teilen beider Epitope. Möglicherweise ist dieses Peptid in der Lage, alternative Strukturen mit KTL bzw. KTI Motiven an der Oberfläche von EGFR nachzubilden, die Gemeinsamkeiten mit beiden Epitopen von Cetuximab bzw. Matuzumab besitzen und daher von beiden Antikörpern erkannt werden können. Eine endgültige Klärung der Bindung der hier identifizierten Peptide an Cetuximab bzw. Matuzumab bzw. der Bindung der anti-Peptid Antikörper an EGFR könnte in nachfolgenden Untersuchungen mittels Röntgenkristallographie bzw. NMR strukturell aufgeklärt werden – die hierzu nötigen Peptide bzw. Proteine liegen bereits in gereinigter Form vor. Eine Optimierung der hier identifizierten Mimotope zur Steigerung der Affinitäten der induzierten anti-Peptid Antikörper für EGFR könnte zur Entwickung von Vakzinen führen, die eine Alternative zur wiederholten, kostenintensiven passiven Immunisierung von Patienten mit EGFR-exprimierenden Tumoren mit monoklonalen Antikörpern darstellen könnte.
In the production of integrated circuits (ICs), photolithography plays a key role in wafer structuring. The basic principle of photolithography is the selective processing of areas (etching, implantation, metallisation etc.) while the others are covered and therefore protected by the resist. After each process step the resist, now modified, has to be removed. In the history of semiconductor manufacturing this has been accomplished with a mixture of H2SO4 and H2O2, H2SO4 and O3 or a plasma etch. As the structure sizes decreased they reached a stage where they had to be exposed to light of shorter wavelengths for the photolithography, going from i-line (365 nm) to DUV (248 nm and 193 nm). This change in wavelength now requires new resists and therewith new stripping methods. Beside the changes in the resist the finer structures are also more sensitive to damages caused by the resist strip. Along with this the demand for cost reduction and environment-friendliness poses a big challenge for modern resist stripping. In this study ozone in deionised water (DI/O3) was the basic chemistry investigated as it is cost efficient in production and disposal as well as environment friendly. Furthermore it is a chemistry known to cause no damage to the wafers. DI/O3 has been successfully applied to strip i-line resists. The challenge now is to find ways and means to make DI/O3 strip even highly implanted DUV resists which currently can only be removed by a plasma etch. To achieve this a detailed understanding of the behaviour of ozone in DI water and the influence of factors both chemical and physical on the stripping efficiency at the different stages in the process is necessary. Along with this, methods which enable the elucidation of resist structures and the changes they undergo during the process of photolithography as well as during the ozone strip have to be developed. This will enable us to understand the mechanisms involved and hence, ideally, develop ozone-based stripping solutions customized for each resist and process step. For this purpose the ozone decomposition in DI water with and without additives was studied via UV-Vis spectroscopy. Radicals generated within the ozone decomposition were trapped and quantified, the resists were studied directly on the wafer with IR and Raman spectroscopy and stripped with DI/O3-mixtures and different setups to find optimum conditions for a complete and damage free resist strip. UV-Vis spectroscopy at 260 nm was used to study ozone decomposition and the factors, both chemical and physical, which influence it. These factors are pH, different additives at the same pH, temperature and mixing of the solution. For the radical determination trapping reactions with MeOH and DMSO both forming CH2O which is further converted to DDL as the detectable species were compared with a variation of the classical iodometric titration acting as an absolute method without the need of calibration. IR spectroscopy proved to be a suitable method for the structural characterisation of the resists and the tracking of the changes undergone during the various processing steps as well as the ozone based stripping. For the stripping with DI/O3 IR spectroscopy delivered well-defined spectra. These displayed significant peak changes which support the assumption of classical ozonolysis as the decomposition mechanism for the unimplanted resist. For the study of the resist crust originating from ion implantation IR was fundamentally unsuitable and was replaced by Raman spectroscopy and microscopy. Raman spectra showed the crust to be of a highly carbon containing structure. Regrettably, the peak assignable to the crust was too broad for the exact composition of the crust to be determined. The wavelength region of the peak corresponds to that of peaks of glassy carbon and highly ordered and conventional graphite. Such a broad peak suggests that the structure of the crust is not uniform but contains more than one carbon modification. As the purpose of all these studies is to enable or improve DI/O3 based resist stripping on unimplanted as well as high-dose implanted resists the removal efficiency of DI/O3 spiked with different additives that alter the pH was studied. For these unimplanted resists the maximum efficiency could be achieved at pH = 5 – 7. Lowering or increasing the pH beyond this range gave poor results. The stripping of highly implanted resists could be achieved only at harsh conditions with a high pH-level of 12 - 13 with a narrow process window showing no stripping at lower pHs and severe damages at higher levels. The principle application of DI/O3 stripping chemistry could be proved but the currently required process time unfortunatelly is too long for commercial application and needs further optimisation.
Flavins are employed to transform physical input into biological output signals. In this function, flavins catalyze a variety of light-induced reactions and redox processes. However, nature also provides flavoproteins with the ability to uncouple the mediation of signals. Such proteins are the riboflavin-binding proteins (RfBPs) with their function to store riboflavin for fast delivery of FMN and FAD. Here we present in vitro and in vivo data showing that the recently discovered archaeal dodecin is an RfBP, and we reveal that riboflavin storage is not restricted to eukaryotes. However, the function of the prokaryotic RfBP dodecin seems to be adapted to the requirement of a monocellular organism. While in eukaryotes RfBPs are involved in trafficking riboflavin, and dodecin is responsible for the flavin homeostasis of the cell. Although only 68 amino acids in length, dodecin is of high functional versatility in neutralizing riboflavin to protect the cellular environment from uncontrolled flavin reactivity. Besides the predominant ultrafast quenching of excited states, dodecin prevents light-induced riboflavin reactivity by the selective degradation of riboflavin to lumichrome. Coordinated with the high affinity for lumichrome, the directed degradation reaction is neutral to the cellular environment and provides an alternative pathway for suppressing uncontrolled riboflavin reactivity. Intriguingly, the different structural and functional properties of a homologous bacterial dodecin suggest that dodecin has different roles in different kingdoms of life.
The membrane-bound heterotrimeric nitrate reductase A (NarGHI) catalyzes the oxidation of quinols in the cytoplasmic membrane of Escherichia coli and reduces nitrate to nitrite in the cytoplasm. The enzyme strongly stabilizes a menasemiquinone intermediate at a quinol oxidation site (Q(D)) located in the vicinity of the distal heme b(D). Here molecular details of the interaction between the semiquinone radical and the protein environment have been provided using advanced multifrequency pulsed EPR methods. (14)N and (15)N ESEEM and HYSCORE measurements carried out at X-band ( approximately 9.7 GHz) on the wild-type enzyme or the enzyme uniformly labeled with (15)N nuclei reveal an interaction between the semiquinone and a single nitrogen nucleus. The isotropic hyperfine coupling constant A(iso)((14)N) approximately 0.8 MHz shows that it occurs via an H-bond to one of the quinone carbonyl group. Using (14)N ESEEM and HYSCORE spectroscopies at a lower frequency (S-band, approximately 3.4 GHz), the (14)N nuclear quadrupolar parameters of the interacting nitrogen nucleus (kappa = 0.49, eta = 0.50) were determined and correspond to those of a histidine N(delta), assigned to the heme b(D) ligand His-66 residue. Moreover S-band (15)N ESEEM spectra enabled us to directly measure the anisotropic part of the nitrogen hyperfine interaction (T((15)N) = 0.16 MHz). A distance of approximately 2.2 Abetween the carbonyl oxygen and the nitrogen could then be calculated. Mechanistic implications of these results are discussed in the context of the peculiar properties of the menasemiquinone intermediate stabilized at the Q(D) site of NarGHI.
Im Rahmen dieser Arbeit wurde das Protein CtaG aus Paracoccus denitrificans eingehend charakterisiert. Es wurde überprüft, ob dieses 21 kDa große Membranprotein als Kupferchaperon und Assemblierungsfaktor für die Untereinheit I der Cytochrom c Oxidase, das heißt für die Biogenese des CuB-Zentrums, in Frage kommt. Eine bioinformatische Analyse zeigte zunächst, dass CtaG, ein Homolog des eukaryotischen Proteins Cox11, zu den am stärksten konservierten Assemblierungsfaktoren der Cytochrom c Oxidase gehört. Interessanterweise sind diese Proteine alle an der Biogenese der redoxaktiven Metallzentren beteiligt, und nur sie sind auch in Paracoccus denitrificans konserviert. Somit stellt Paracoccus ein ideales Modellsystem dar, um die essentiellen Schritte der Biogenese der Cytochrom c Oxidase zu untersuchen. Ein lösliches Fragment von CtaG (CtaGLF) wurde heterolog in E. coli exprimiert und mit Hilfe eines spaltbaren His6-tags aufgereinigt. Es wurde ein Protokoll entwickelt, mit dessen Hilfe die Aggregation des löslichen Fragments minimiert und das Protein in hochreiner, aggregatfreier Form isoliert werden kann. Rekonstitutionsversuche zeigten, dass CtaGLF ein spezifisch Cu(I)-bindendes Protein ist. Nach der heterologen Expression in E. coli ist CtaGLF kofaktorfrei. Ein Protokoll zur in vitro Rekonstitution mit Kupferionen wurde entwickelt, mit welchem ein stöchiometrisches Kupfer/Protein-Verhältnis erreicht wird. Gelfiltrations- und ICP-MS-Analysen zeigten, dass CtaGLF Kupferionen ausschließlich als Dimer bindet. Rekonstitutionen bei denen Cu(I), Cu(II), Co(II), Fe(II), Mn(II), Mg(II) und Ni(II) sowohl einzeln als auch simultan angeboten wurden, führten zwar zu wenig reproduzierbaren absoluten Stöchiometrien, bestätigten aber, dass CtaGLF bevorzugt Cu(I) bindet. Mutagenesestudien bewiesen einerseits, dass drei Cysteinreste maßgeblich für die Kupferbindung verantwortlich sind und deuteten andererseits darauf hin, dass zwei identische, punktsymmetrische Bindungsstellen des CtaGLF-Dimers die Kupferionen koordinieren. Mit Hilfe einer Multiseq-Analyse wurden zunächst hochkonservierte Oberflächenreste von CtaG identifiziert. Eine Auswahl dieser Aminosäuren wurde per gerichteter Mutagenese ersetzt und der Effekt dieser Mutationen auf Stöchiometrie, Affinität und Dimerisierung von CtaGLF wurde untersucht. Die Affinitäten wurden dabei mit Hilfe von Kompetitionsexperimenten mit dem Cu(I)-spezifischen Chelator BCA analysiert. Insgesamt vier mögliche Szenarien für die Kupferbindung von CtaG wurden postuliert und anhand der Datenlage diskutiert. Das Szenario III, welches die Datenlage am besten zu erklären vermag, sieht eine trigonale Koordination der Kupferionen vor, an welcher die Cysteine des hochkonservierten CFCF-Motivs einer Polypeptidkette ein gemeinsames Koordinationsfeld mit dem nahe der Transmembranhelix gelegenen Cystein 38 der jeweils anderen Polypeptidkette bilden. Mit Hilfe von UV/Vis-spektroskopischen Messungen wurde gezeigt, dass die Bindung von Kupferionen an CtaGLF zu einer Absorption bei 358 nm führt. Diese kann mit einem Extinktionskoeffizienten von E delta 358 nm = 936 M-1cm-1 zur Beobachtung des Kupfertransfers von CtaGLF auf einen Akzeptor verwendet werden. Um eine Beteiligung von CtaG bei der Insertion des CuB-Ions in die Untereinheit I der Cytochrom c Oxidase (UE I) zu beweisen, wurden zwei Arbeitshypothesen aufgestellt und empirisch untersucht: Die erste Hypothese geht von einer posttranslationalen Kupferinsertion aus. Die UE I wird laut dieser Hypothese zunächst vollständig exprimiert und in die Membran inseriert, bevor das Kupferion über einen Kanal in das 13 Å unterhalb der Membranoberfläche gelegene aktive Zentrum der Oxidase inseriert wird. Drei Ansätze wurden zur empirischen Überprüfung dieser Hypothese verfolgt: Erstens wurde ein in vitro Transferassay etabliert, bei dem heterolog exprimierte, kofaktorfreie UE I als Akzeptor für Kupferionen von CtaGLF diente. Zweitens wurden bioinformatische Analysen durchgeführt um potentielle Interaktionsflächen zwischen CtaG und UE I zu identifizieren. Und drittens wurde mit Hilfe koaffinitätschromatographischer Versuche eine Interaktion zwischen CtaG und kofaktorfreier UE I untersucht. Die Ergebnisse dieser Untersuchungen sprechen allesamt gegen eine posttranslationale CtaG-vermittelte Insertion von Kupferionen in die UE I der Cytochrom c Oxidase. Die zweite Hypothese geht davon aus, dass die prosthetischen Häm- und Kupfergruppen bereits vor der vollständigen Membraninsertion, das heißt kotranslational auf die UE I übertragen werden. Um diese Hypothese zu überprüfen, wurden ebenfalls mehrere Ansätze verfolgt: Erstens wurde die UE I in Gegenwart und Abwesenheit von CtaG heterolog in E. coli exprimiert und anschließend aufgereinigt. In Abwesenheit weiterer Assemblierungsfaktoren ist CtaG in diesem System nicht dazu in der Lage den Kupfergehalt der UE I zu erhöhen. Zweitens wurde mit Hilfe von Blau-Nativ Gelen und Crosslinking-Versuchen im nativen Wirt Paracoccus denitrificans nach einer Wechselwirkung zwischen CtaG und UE I gesucht. Insbesondere die Ergebnisse der Crosslinking-Versuche deuten auf einen Assemblierungskomplex hin, der sowohl CtaG als auch die UE I der Cytochrom c Oxidase enthält. In einem dritten Ansatz wurde ein zellfreies Expressionssystem etabliert, welches direkten Zugang zu naszierenden Ketten der UE I ermöglicht. Dieses System erscheint vielversprechend und dient derzeit als Basis für weitere Biogenesestudien. Die Ergebnisse der vorliegenden Arbeit zeigen, dass CtaG ein spezifisch Cu(I)-bindendes Protein ist, das im Zuge der Kupferbindung dimerisiert und in Paraoccus denitrificans in einem hochmolekularen Komplex gemeinsam mit UE I vorliegt. Die gegenwärtige Datenlage spricht dafür, dass CtaG als Kupferchaperon an der Biogenese der Cytochrom c Oxidase beteiligt ist und das CuB-Ion in einem kotranslationalen Mechanismus in die UE I der Cytochrom c Oxidase inseriert.
Na+/H+ antiporters are ubiquitous membrane proteins involved in ion homeostasis and pH sensing. The amino acid sequence of one such antiporter, MjNhaP1, from Methanococcus jannaschii, shows a significant homology to eukaryotic sodium proton exchangers like NHE1 from Homo sapiens and SOS1 of Arabidopsis thaliana than to the well-characterized Escherichia coli NhaA or NhaB. MjNhaP1 shows activity at acidic pH unlike NhaA, which is active at basic pH. 13 transmembrane helices have been predicted to be present in NhaP1. A projection map, calculated by Cryo-EM of 2D crystals of MjNhaP1 grown at pH 4, showed it to be a dimer containing elongated densities in the centre of the dimer and a cluster of density peaks on either side of the dimer core (Vinothkumar et al., 2005). Incubation of 2D crystals at pH 8 on the EM grid resulted in well-defined conformational changes, clearly evident in a difference map as a major change in density distribution within the helix bundle (Vinothkumar et al., 2005). The aim of this dissertation is to understand the working mechanism of MjNhaP1 by determining its three-dimensional structure. The aim was initially approached by structure determination by X-ray crystallography. The limitation for this method was the low expression yield, which was 0.5–0.7mg/ml (Vinothkumar et al., 2005). After various optimization trials, the expression yield of the recombinant protein could be elevated to 2-2.5mg of pure protein per litre of culture by the method of autoinduction (Studier et al., 2005). To obtain well diffracting 3D crystals, purification conditions (Vinothkumar et al., 2005) were modified. 3D crystals were obtained under various conditions, which has so far not diffracted X-Ray beyond 8Å. Parallely, optimization of parameters (Vinothkumar et al., 2005) for 2D crystals formation was carried out. A combination of 1% DDM used for lipid solubilization, and 1% OG in the buffer of the purified protein produced 1-2 μm wide tubular 2D crystals of NhaP1. This batch of crystal proved to be the optimal for data collection at higher tilt angle with the electron microscope. A 3D map showed p22121 symmetry and revealed a tight dimer with an oval shape. The region in the central part of the dimer is composed of several tilted helices forming an interface between both monomers. On either side of the dimer interface, a group of six tightly packed helices form a bundle. This bundle contains three straight helices in the centre of the monomer and three helices in the periphery. Comparison of the structures of E.coli NhaA and M. jannaschii NhaP1 show substantial differences in length and slope of corresponding helices between both antiporters. A 3D model of NhaP1 based on the 3D map revealed 13 helices, which has been named as A-M to distinguish it from the NhaA helices. Overlaying the X-ray structure onto the 3D map revealed that the disrupted helices IV and XI of NhaA superimpose two central helices at similar position in the 3D map of NhaP1. The disrupted helices IV and XI in the X-ray structure of NhaA have been proposed as the putative ion-binding and translocation site (Hunte C et al, 2005; Arkin IT et al, 2007; Screpanti & Hunte (2007). This motif appears to be present also in NhaP1, as suggested by the close fit of NhaA helices IV and XI on the putative helices E and L of the NhaP1 model. These two putative helices E and L in NhaP1 contain the highly conserved TDP and GPRVVP motif, which are crucial for antiporter activity (Hellmer et al., 2002, Hellmer et al., 2003). In the overlay, helix V of NhaA containing the two essential, conserved aspartates D163 and D164 fits the density of the putative helix F of NhaP1, which contains the conserved motif FNDP. The homologous D161 in the FNDP motif of NhaP1 is essential for transport activity as show by mutagenesis (Hellmer at al., 2003). Significant differences are visible in the region of the dimer interface of the 3D map of NhaP1 occupied by helices VI, VII, and VIII in NhaA. This region shows an extra helical density (A) in the 3D map of NhaP1. By alignment of MjNhaP1 sequence with the amino acid sequences of several Na+/H+ exchangers, it was evident that the additional helix (A) is located in the N terminus of NhaP1. In our sequence alignment, a putative hydrophobic segment corresponding to this additional helix A is present in other archaeal and eukaryotic antiporters but not in any of the bacterial ones. The N-terminus of the human Na+/H+ exchanger NHE1 has been predicted to contain a highly hydrophobic signal peptide. This indicates the probability of the N-terminal helix A of NhaP1 to be an uncleaved signal peptide. Besides being a signal sequence targeting NhaP1 to the membrane, the map suggests that this helix might be involved in the formation of dimer contacts between both monomers. A gene duplication event is evident in the 3D map of NhaP1, as not only the helices D, E, F and K, L, M are related by an inverted repeat but also the helices B, C and I, J are related. We present here the three-dimensional architecture of a Na+/H+ antiporter from archaea. The presence of the 13th helix suggests the location of the N-terminus to be located in the cytosol and the C-terminus in the periplasm. This would orient NhaP1 in an inverted manner in the membrane in comparison to NhaA. Further structural information at higher resolution and biochemical and biophysical investigations are required to confirm the topology.
Die genetische Information innerhalb einer Zelle kodiert nicht nur die spezifische Struktur und Funktion von Proteinen, sondern auch die Entstehung dieser Struktur durch den Prozess der Proteinfaltung. Aus zahlreichen experimentellen und theoretischen Studien wurde offensichtlich, dass Faltung und Entfaltung von Proteinen in vielen zellulären Prozessen eine entscheidende Rolle spielt. Diese Beobachtungen führten zu der zwangsläufigen Erkenntnis, dass das Unvermögen von Proteinen sich korrekt zu falten oder korrekt gefaltet zu bleiben der Auslöser für viele verschiedene Arten biologischen Fehlverhaltens ist und infolgedessen unterschiedliche Krankheitsformen mit sich bringt. Die strukturelle und dynamische Charakterisierung von nicht-nativen Proteinzuständen ist daher eine wichtige Grundlage einerseits zur Erforschung der krankheitsauslösenden Prozesse, andererseits aber auch zum generellen Verständnis der Proteinfaltung an sich. Allein hochauflösende NMR-Experimente können detaillierte Informationen über Struktur und Dynamiken solcher Zustände auf atomarer Ebene liefern. In der vorliegenden Arbeit wurde die C-terminale Domäne des humanen Prionenproteins [hPrP(121-230)] unter Bedingungen untersucht, bei denen dieses Protein permanent in einem nicht-nativen Zustand vorliegt. Dies wurde durch die Verwendung einer hochmolaren Harnstofflösung (8 M, pH 2,0) erreicht. Zur Untersuchung dieses nicht-nativen Zustands mittels NMR wurde das PrP(121-230) in E.coli-Zellen isotopenmarkiert exprimiert und in Mengen von einigen Milligramm aufgereinigt. Nach der sequentiellen Zuordnung der 13Ca-, 13Cb-, 13CO-, 1Ha- und 1HN-Resonanzen konnte aus den sekundären chemischen Verschiebungen auf Regionen innerhalb der Polypeptidkette geschlossen werden, die erhöhte b-faltblattartige Konformationsanteile enthalten. Heteronukleare Relaxa-tionsraten wurden zur Untersuchung der konformationellen Dynamik herangezogen. Auch hier konnten Regionen verminderter Mobilität (hydrophobe Cluster) nachgewiesen werden, die mit den zuvor entdeckten Bereichen aus der Analyse der chemischen Verschiebungen übereinstimmten. Die Messung von R1r-Relaxationsraten erbrachte zudem keine Hinweise auf konformationellen Austausch auf der μs-ms-Zeitskala. Weiterhin wurde der Einfluss der Disulfidbrücke auf Konformation und Dynamik des hPrP(121-230) untersucht. Dies wurde durch die Reduktion der Disulfidbrücke und die anschließende Methylierung der beiden Cysteine erreicht. Im Gegensatz zu der Analyse der chemischen Verschiebungen zeigte die Auswertung der konformationellen Dynamiken dramatische Unterschiede zwischen den oxidierten und reduzierten Zuständen des hPrP(121-230). Insbesondere im Bereich um die beiden Cysteine konnten große Unterschiede festgestellt werden; im reduzierten Zustand führte die zusätzliche Bewegungsfreiheit zu erhöhten Dynamiken und gab den Blick auf zusätzliche hydrophobe Bereiche frei, die im oxidierten Zustand durch hohe Relaxationsraten verdeckt geblieben waren. Ein weiterer wesentlicher Unterschied zwischen dem oxidierten und dem reduzierten Zustand des hPrP(121-230), der mit Hilfe des Fluoreszenzfarbstoffes Thioflavin T beschrieben werden konnte, bestand in der Fähigkeit Fibrillen auszubilden; während das oxidierte hPrP diese Eigenschaft besaß, führte der Verlust der intakten Disulfidbrücke zu einer Proteinkonformation, die nicht mehr zur Bildung von fibrillären Strukturen im Stande war. Im weiteren Verlauf der Arbeit wurden die strukturellen, dynamischen und kinetischen Charakteristika des hPrP(121-230) mit denen des murinen Prionenproteins mPrP(121-232) sowohl im oxidierten als auch im reduzierten Zustand verglichen. Auf der Basis der chemischen Verschiebungen und der heteronuklearen Relaxationsdaten konnte gezeigt werden, dass beide Proteine in den jeweiligen komplementären Zuständen (oxidiert bzw. reduziert) sehr ähnliche strukturelle und dynamische Eigenschaften besitzen. Aufgrund einiger Aminosäureaustausche in den beiden Proteinsequenzen kommt es jedoch zu kleineren Unterschieden, die jedoch nur in lokalen Bereichen der Polypeptidkette zum Tragen kommen. Somit konnte gezeigt werden, dass das mPrP(121-232) als ein geeignetes Modellsystem für das humane Prionenprotein dienen kann. Abschließend wurde der Einfluss von insgesamt zwölf verschiedenen Punktmutationen, die beim Menschen mit Prionenerkrankungen assoziiert sind, auf das Aggregationsverhalten des mPrP(121-232) untersucht. Dabei fiel zum einen auf, dass die Aggregation mit zunehmender Proteinkonzentration schneller verlief, zum anderen aber auch, dass es insbesondere bei geringen Proteinkonzentrationen zu signifikanten Unterschieden in der Aggregationsgeschwindigkeit der verschiedenen mutierten Proteinkonstrukte kommt. Zusammenfassend ist festzustellen, dass in dieser Arbeit strukturelle und dynamische Eigenschaften der nicht-nativen Zustände von hPrP(121-230) und mPrP(121-232) sowohl im oxidierten als auch im reduzierten Zustand durch die Verwendung von NMRspektroskopischen Experimenten charakterisiert werden konnten. Zudem konnte mit Hilfe von Fluoreszenzspektroskopie das Aggregationsverhalten der einzelnen Proteinzustände beschrieben und in einem ersten Schritt der Einfluss von verschiedenen Punktmutationen auf die Aggregationsgeschwindigkeit ermittelt werden.
A solid-supported membrane (SSM) is an alkanethiol/lipid hybrid membrane with comparable lipid mobility, conductivity, and capacitance than a black lipid membrane (BLM). However, mechanical perturbations, which usually destroy a BLM, do not influence the life-time of a SSM, which is mechanically so stable that solutions may be rapidly exchanged at its surface. This key property has been utilized in this thesis to characterize electrophysiologically two bacterial secondary active transporters (MelB and LacY) as well as to investigate the specific interactions between ions and lipid membranes. These three different projects are summarized below: (1) The properties of lipid membranes, which represent the most important biological interface between intracellular and extracellular compartments, are essentially modulated by the ionic composition of the surrounding aqueous medium. To investigate specific interactions between ions and lipid membranes, solutions of different ionic composition were exchanged at the surface of a SSM through a flow system. This solution exchange resulted in charge translocations that were interpreted in terms of binding of the ions to the lipid headgroups at the SSM surface. We found that chaotropic anions and kosmotropic cations are attracted to the membrane independent of the membrane composition. In particular, the same behaviour was found for lipid headgroups bearing no charge like monoolein. This general trend is modulated by the electrostatic interaction of the ions with the lipid headgroup charge. Our experimental results are in agreement with recent molecular dynamic simulations of PC membranes. (2) Rapid solution exchange on a solid-supported membrane (SSM) is investigated using fluidic structures and a solid-supported membrane in a wall jet geometry. The flow was analyzed with a new technique based on specific ion interactions with the surface combined with an electrical measurement. The critical parameters affecting the time course of the solution exchange and the transfer function describing the time resolution of the SSM system were determined. The experimental data indicate that the solution transport follows a plug flow geometry while the rise of the surface concentration can be approximated by Hagen Poiseuille flow with ideal mixing at the surface of the SSM. Using an improved cuvette design a solution exchange as fast as 2 ms was achieved at the surface of a solid supported membrane. As an application of the technique the rate constant of a fast electrogenic reaction in the melibiose permease MelB, a bacterial (Escherichia coli) sugar transporter, is determined. For comparison, the kinetics of a conformational transition of the same transporter was measured using stopped-flow tryptophan fluorescence spectroscopy. The relaxation time constant obtained for the charge displacement agrees with that determined in the stopped-flow experiments. This supports the previous proposition that upon sugar binding MelB undergoes an electrogenic conformational transition with a rate constant of k ~ 250 s-1. (3) Electrogenic events due to activity of wild-type lactose permease from Escherichia coli (LacY) were investigated with proteoliposomes containing purified LacY adsorbed on a solid-supported membrane electrode. Downhill sugar/H+ symport into the proteoliposomes generates transient currents. Studies at different lipid to protein ratios and at different pH values, as well as inactivation by N-ethylmaleimide, show that the currents are due specifically to the activity of LacY. From analysis of the currents under different conditions and comparison with biochemical data, it is apparent that the predominant electrogenic event in downhill sugar/H+ symport is H+ release. In contrast, LacY mutants E325A and C154G, which bind ligand normally but are severely defective with respect to lactose/H+ symport, exhibit a minor electrogenic event upon addition of LacY-specific substrates, representing only 6% of the total charge displacement of the wild-type. This activity is due either to substrate binding per se or to a conformational transition following substrate binding. We propose that turnover of LacY involves at least two electrogenic reactions: (i) a minor reaction that occurs upon sugar binding and is due to a conformational transition in LacY; and (ii) a major reaction due to cytoplasmic release of H+ during downhill sugar/H+ symport, which is the limiting step for this mode of transport.
Lentiviral vectors mediate gene transfer into dividing and most non-dividing cells. Thereby, they stably integrate the transgene into the host cell genome. For this reason, lentiviral vectors are a promising tool for gene therapy. However, safety and efficiency of lentiviral mediated gene transfer still needs to be optimised. Ideally, cell entry should be restricted to the cell population relevant for a particular therapeutic application. Furthermore, lentiviral vectors able to transduce quiescent lymphocytes are desirable. Although many approaches were followed to engineer retroviral envelope proteins, an effective and universally applicable system for retargeting of lentiviral cell entry is still not available. Just before the experimental work of this thesis was started, retargeting of measles virus (MV) cell entry was achieved. This virus has two types of envelope glycoproteins, the hemagglutinin (H) protein responsible for receptor recognition and the fusion (F) protein mediating membrane fusion. For retargeting, the H protein was mutated in its interaction sites for the native MV receptors and a ligand or a single-chain antibody (scAb) was fused to its ectodomain. It was hypothesised that the retargeting system of MV can be transferred to lentiviral vectors by pseudotyping human immunodeficiency virus-1 (HIV-1) derived vector particles with the MV glycoproteins. As the unmodified MV glycoproteins did not pseudotype HIV vectors, two F and 15 H protein variants carrying stepwise truncations or amino acid (aa) exchanges in their cytoplasmic tails were screened for their ability to form MV-HIV pseudotypes. The combinations Hcd18/Fcd30, Hcd19/Fcd30 and Hcd24+4A/Fcd30 led to most efficient pseudotype formation with titers above 10exp6 transducing units /ml, using concentrated particles. The F cytoplasmic tail was truncated by 30 aa and the H cytoplasmic tail was truncated by 18, 19 or 24 residues with four added alanines after the start methionine in the latter case. Western blot analysis indicated that particle incorporation of the MV glycoproteins was enhanced upon truncation of their cytoplasmic tails. With the MV-HIV vectors high titers on different cell lines expressing one or both MV receptors were obtained, whereas MV receptor-negative cells remained untransduced. Titers were enhanced using an optimal H to F plasmid ratio (1:7) during vector particle production. Based on the described pseudotyping with the MV glycoprotein variants, HIV vectors retargeted to the epidermal growth factor receptor (EGFR) or the B cell surface marker CD20 were generated. For the production of the retargeted vectors MVaEGFR-HIV and MVaCD20-HIV, Fcd30 together with a native receptor blind Hcd18 protein, displaying at its ectodomain either the ligand EGF or a scAb directed against CD20 were used. With these vectors, gene transfer into target receptor-positive cells was several orders of magnitude more efficient than into control cells. The almost complete absence of background transduction of non-target cells was e.g. demonstrated in mixed cell populations, where the CD20-targeting vector selectively eliminated CD20-positive cells upon suicide gene transfer. Remarkably, transduction of activated primary human CD20-positive B cells was much more efficient with the MVaCD20-HIV vector than with the standard pseudotype vector VSV-G-HIV. Even more surprisingly, MVaCD20-HIV vectors were able to transduce quiescent primary human B cells, which until then had been resistant towards lentiviral gene transfer. The most critical step during the production of MV-HIV pseudotypes was the identification of H cytoplasmic tail mutants that allowed pseudotyping while retaining the fusion helper function. In contrast to previously inefficient targeting strategies, the reason for the success of this novel targeting system must be based on the separation of the receptor recognition and fusion functions onto two different proteins. Furthermore, with the CD20-targeting vector transduction of quiescent B cells was demonstrated for the first time. Own data and literature data suggest that CD20 binding and hyper-cross-linking by the vector particles results in calcium influx and thus activation of quiescent B cells. Alternatively this feature may be based on a residual binding activity of the MV glycoproteins to the native MV receptors that is insufficient for entry but induces cytoskeleton rearrangements dissolving the post-entry block of HIV vectors. Hence, in this thesis efficient retargeting of lentiviral vectors and transduction of quiescent cells was combined. This novel targeting strategy should be easily adaptable to many other target molecules by extending the modified MV H protein with appropriate specific domains or scAbs. It should now be possible to tailor lentiviral vectors for highly selective gene transfer into any desired target cell population with an unprecedented degree of efficiency.
The five-membered ring of the title compound, C10H14NO, is almost planar [mean deviation from best plane = 0.006 (1) Å]. The N-O bond is in the plane of the five-membered ring. The molecule is positioned about a pseudo-mirror plane at y = 0.375. In the crystal, molecules are connected by intermolecular C-H...O contacts into layers parallel to (010). Key indicators: single-crystal X-ray study; T = 167 K; mean σ(C–C) = 0.002 Å; R factor = 0.062; wR factor = 0.157; data-to-parameter ratio = 27.3.
This thesis describes the structural characterization of interactions between biological relevant ribonucleic acid biomacromolecules (RNAs) and selected ligands to optimize the methodologies for the design of pharmacological lead compounds. To achieve this aim, not only the structures of the RNA, the ligand and their complexes need to be known, but also information about the inherent dynamics, especially of the target RNA, are necessary. To determine the structure and dynamics of these molecules and their complexes, liquid state nuclear magnetic resonance spectroscopy (NMR) is a suitable and powerful method. The necessity for these investigations arises from the lack of knowledge in RNA-ligand interactions, e.g. for the development of new medicinal drugs targeting crucial RNA sequences. In the first chapters of this thesis (Chapters II to IV), an introduction into RNA research is given with a focus on RNA structural features (Chapter II), into the interacting molecules, the biology of the specific RNA targets and the further development of their ligands (Chapter III) and into the NMR theory and methodologies used within this thesis (Chapter IV). Chapter II begins with a description of RNA characteristics and functions, placing the focus on the increasing attention that these biomacromolecules have attracted in recent years due to their diverse biological functionalities. This is followed by a detailed description of general structural features of RNA molecules. The biological functions of the RNAs investigated in this thesis (Human immunodeficiency virus PSI- and TAR-RNA and Coxsackievirus B3 Stemloop D in the 5’-cloverleaf element), together with their known structural characteristics are introduced in Chapter III. Furthermore, a description of the investigated ligands is given, focusing on the methods how their affinity and specificity were determined. The introduction is completed in Chapter IV, where the relevant NMR theory and methodologies are explained. First, kinetics and thermodynamics of ligand binding are summarized from an NMR point of view. Subsequently, a detailed description of the resonance assignment procedures for RNAs and peptidic ligands is given. This procedure mainly concentrates on the assignment of the proton resonances, which are essential for the later structure calculation from NMR restraints. The procedure for NMR structure calculation of RNA and its complexes follows with a short introduction into the programs ARIA and HADDOCK. The final part of this chapter explains the relaxation theory and the methodology to extract dynamic information from autocorrelated relaxation rates via the model-free formalism. In the Chapters V to VII of this thesis, the original publications are included and grouped into three topics. Chapter V comprehends the publications on the investigations of HIV PSI-RNA and its hexapeptidic ligand. These three publications[1-3] focus on the characterization of the ligand and its binding properties, its structure and the optimization of its composition aiming to improve its usage for further spectroscopic investigations.
Channelrhodopsin-2, or ChR2, is a light-gated inward rectifying cation channel. Ever since its first characterisation (Nagel et al., 2003), it has been used extensively in the light-activated control of neural cells in culture as well as in living animals like mice, Caenorhabditis elegans and Drosophila melanagaster. Despite its broad application in the field of neuroscience, little is known about the properties of this ion channel. The aim of this thesis is to elucidate the single channel conductance under different conditions using stationary noise analysis on whole cell recordings of a HEK293 cell line that stably expresses the truncated ChR2 (amino acids 1-315), which behaves identically to the full length protein (Nagel et al., 2003). Stationary noise analysis is based on the fact that the ion channel noise due their opening and closing has a characteristic form of a plateau at low frequency points and a following decrease of power with 1/f² in difference power spectra, which are composed of the difference of fast Fourier transformed (FFT) stationary whole-cell recordings with and without illumination. From the parameters yielded by an approximation of the power spectra with a Lorentzian function the single channel conductance can be estimated. The single channel conductance of ChR2 was determined at -60 mV applied for different cations, yielding values of 91 ± 25 fS (Guanidine+), 42 ± 7 fS (Na+), 61 ± 18 fS (Li+) and 37 ± 14 fS (Methylammonium+). With 200 mM Guanidine+ outside of the cells and measurements between 0 mV and -60 mV applied, it could be shown that the inward rectification is still present on the scale of the single channel. Noise Analysis with concentrations between 40 and 200 mM Guanidine+ showed a saturation of the single channel conductance with high Guanidine+ concentrations with a maximal conduction of 129 ± 9 fS (Michaelis Menten approximation: Km = 82 ± 14 mM). Activation Energies of the rate constants k (2πfc, with fc = corner frequency of the Lorentzian function) and koff (1/τoff, with τoff = closing time of the channel at -60 mV) were determined to be 75 ± 23 kJ/mol and 64 ± 11 kJ/mol, respectively, which are similar to the value determined for the Channelrhodopsin-1 closing times (~60 kJ/mol; Nagel et al., 2002). The activation energy of the ChR2 single channel conductance was determined to be 21.2 ± 20.8 kJ/mol, which also is similar to the activation energy of the ChR1 current amplitude (20 kJ/mol; Nagel et al., 2002). The amount of active ChR2 channels in the membrane (160,000 or 226 ChR2/μm²) as well as the single channel current (-7.5 ± 0.6 fA) could be determined by variation of the light intensity (0.05 mW mm-2 to 5.3 mW mm-2). In the course of this thesis, the single channel parameters of the ChR2 mutant H134R were also determined. H134R had been previously published as a “gainof- function” mutant (Nagel et al., 2005a). The increased macroscopic current amplitude of H134R could be explained by an increased lifetime of the channel in comparison to the wildtype ChR2. Within the margin of error both single channel conductances in the presence of 200 mM Guanidine+ of the wildtype (91.1 ± 24.9 fS) and the H134R (89.4 ± 30.7 fS) are the same. In the presence of 200 mM Lithium+ values of 60.6 ± 17.8 fS for the wildtype ChR2 and 50.8 ± 9.6 fS for the H134R mutant were determined. This thesis marks the first in depth analysis of the single channel conductance of ChR2. Using stationary noise analysis the single channel conductance of Channelrhodopsin-1 as well as interesting Channelrhodopsin-2 mutants can also be analysed in the future.
The title compound, Cs2Mg(H2P2O7)2·2H2O, is isostructural with the related known isoformular phosphates. The crystal framework consists of corner-sharing MgO6 and H2P2O7 polyhedra, leading to tunnels parallel to the b-axis direction in which Cs+ ions are located. The H2P2O7 unit shows a bent eclipsed conformation. The Mg2+ ion lies on an inversion center. The water molecules form hydrogen bonds to O atoms of two different dihydrogenphosphate ions, which are further hydrogen bonded to symmetry-equivalent dihydrogenphosphate ions. Key indicators: single-crystal X-ray study; T = 173 K; mean σ(P–O) = 0.006 Å; R factor = 0.048; wR factor = 0.125; data-to-parameter ratio = 12.3.