Refine
Year of publication
Document Type
- Doctoral Thesis (597) (remove)
Has Fulltext
- yes (597)
Is part of the Bibliography
- no (597) (remove)
Keywords
- Quark-Gluon-Plasma (8)
- Schwerionenphysik (8)
- CERN (5)
- Heavy Ion Collisions (5)
- Ionenstrahl (5)
- LHC (5)
- Monte-Carlo-Simulation (5)
- Quantenchromodynamik (5)
- Schwerionenstoß (5)
- Teilchenbeschleuniger (5)
Institute
- Physik (597) (remove)
Im Rahmen des FAIR Projektes wurde ein neuartiger Prototyp eines nicht strahlzerstörenden Bunch Struktur Monitors (BSM) am GSI UNILAC entwickelt. Ziel ist es, ein zuverlässiges Diagnosegerät zu entwickeln, welches die longitudinale Struktur der Ionenbunche innerhalb des LINACs untersuchen kann. Notwendig ist hierbei eine effektive Zeitauflösung deutlich unter 100 ps, bei möglichst wenigen Makropuls Mittelungen. Nach der erfolgreichen Inbetriebnahme soll der BSM Prototyp dazu dienen, die Umsetzbarkeit eines weiteren nichtinvasiven Geräts für den geplanten Proton-LINAC bei FAIR mit einer notwendigen Zeitauflösung von 10 ps zu beurteilen.
Die numerische Simulation von Materialien, welche dem Hochstrom-Ionenstrahl ausgesetzt sind, zeigten einen sehr hohen thermischen Stress. Daher wurde der Ansatz eines nicht strahlzerstörenden Diagnosegerätes verfolgt. Das Design beruht auf der Erzeugung von Sekundärelektronen durch Strahl-Restgas Kollisionen im Strahlrohr. Durch das Anlegen eines homogenen Hochspannungspotentials von bis zu -31 kV, wird ein Elektronenstrahl erzeugt, welcher die zeitliche Struktur des Ionenbunches trägt. Die zeitliche Information des Elektronenstrahles wird beim Durchfliegen eines HF-Ablenkers, welcher resonant an die 36 MHz des Beschleunigers gekoppelt ist, in eine räumliche Intensitätsverteilung umgewandelt. Anschließend wird die Elektronenverteilung auf einem bildgebenden MCP-Phosphor-Detektor durch eine CCD-Kamera detektiert und in die Bunch Struktur überführt.
Intensive Untersuchungen der BSM Eigenschaften ergaben eine höchste Auflösung von 37 ±6.3 ps bei gleichzeitig akzeptabler Intensität auf dem MCP-Detektor. Unter anderem wurden auch stabile Einzelschussmessungen durchgeführt, welche für die Profilmessung nur einen einzelnen Makropuls benötigten, statt über typischerweise 8-32 Pulse zu mitteln.
Durch die systematische Manipulation der Bunchlänge durch einen Rebuncher sind nicht gaußförmige Profile von 280 ps bis 650 ps detektiert worden, welche als Studie für eine Emittanzbestimmung genutzt worden sind. In Abhängigkeit des Analyseverfahrens sind Werte von εGauss = 1.42 ±0.14 keV/u ns bis εSD = 3.03 ±0.33 keV/u ns für die Emittanz bestimmt worden.
Des Weiteren ist ein Finite-Elemente Modell erstellt worden, um die Zeitstruktur der Sekundärelektronen innerhalb des elektronenoptischen Systems zu bestimmen. Für das Setup mit der höchsten Auflösung von 37 ps ergab sich eine zusätzliche Zeitverbreiterung von 5.6 ps, welche nur geringfügig die experimentell bestimmte Auflösung verschlechtert.
Der nicht strahlzerstörende BSM liefert eine ausreichend hohe zeitliche Auflösung für detailreiche Untersuchung der longitudinalen Bunchstruktur, ohne negative Einflüsse auf den Ionenstrahl auszuüben. Fortgeschrittene Messungen, wie longitudinale Emittanzbestimmung und Makropulsanalysen, sind möglich und werden dazu beitragen, die LINAC Strukturen besser zu verstehen und weiter zu optimieren.
Obwohl bei der Umsetzung des Arbeitsprinzips für den geplanten Proton-LINAC die veränderten Strahlparameter berücksichtigt werden müssen, zeigen die Ergebnisse, wie die Zeitstrukturuntersuchung und die erreichte Phasenauflösung von 0.5° bei 36 MHz, dass zeitliche Auflösungen bei Aufrechterhaltung der Phasenauflösung von bis zu 10 ps für einen neuen BSM Prototypen möglich sind.
The PhD addresses the feasibility of reconstructing open charm mesons with the Compressed Baryonic Matter experiment, which will be installed at the FAIR accelerator complex at Darmstadt/Germany. The measurements will be carried out by means of a dedicated Micro Vertex Detector (MVD), which will be equipped with CMOS Monolithic Active Pixel Sensors (MAPS). The feasibility of reconstructing the particles with a proposed detector setup was studied.
To obtain conclusive results, the properties of a MAPS prototype were measured in a beam test at the CERN-SPS accelerator. Based on the results achieved, a dedicated simulation software for the sensors was developed and implemented into the software framework of CBM (CBMRoot). Simulations on the reconstruction of D0-mesons were carried out. It is concluded that the reconstruction of those particles is possible.
The PhD introduces the physics motivation of doing open charm measurements, represents the results of the measurements of MAPS and introduces the innovative simulation model for those sensors as much as the concept and results of simulations of the D0 reconstruction.
Der Radiofrequenzquadrupol (RFQ) wird typischerweise als erstes beschleunigendes Element in Beschleunigeranlagen eingesetzt. Das elektrische Quadrupolfeld ermöglicht die gleichzeitige Fokussierung und Beschleunigung des Ionenstrahls. Zudem ist der RFQ in der Lage den Gleichstromstrahl von der Ionenquelle zu Teilchenpaketen (Bunche) zu formen, die von den nachfolgenden Driftröhrenbeschleunigern benötigt werden. Ziel der vorliegenden Arbeit war die Untersuchung zur Realisierbarkeit eines 325 MHz 4-rod RFQ Beschleunigers. Die Frequenz von 325 MHz stellt eine ungewöhnlich hohe Betriebsfrequenz für die 4-rod Struktur dar und wird z.B. für den Protonenlinac des FAIR Projektes benötigt. Ein Problem hierbei war, dass durch die bauartbedingten unsymmetrischen Elektrodenaufhängung und der hohen Frequenz ein, das Quadrupolfeld überlagerndes, Dipolfeld erzeugt wird. Dieses störende Feld kann z.B. zu einem Versatz der Strahlachse führen. Hierzu wurde die 4-rod Struktur in Simulationen grundlegend auf Einflüsse von verschiedenen Parametern auf die Resonanzfrequenz und das Dipolfeld untersucht. Es wurden Lösungsstrategien erarbeitet das Diopolfeld zu kompensieren und auf einen Prototypen angewendet. Zudem wurde das Verhalten höherer Schwingungsmoden dieser Struktur simuliert. In diesem Rahmen wurden auch Simulationen zu Randfeldern zwischen den 4-rod Elektroden und der Tankwand untersucht, um nachteilige Effekte für die Strahlqualität auszuschließen. Basierend auf den Simulationsergebnissen wurde ein Prototyp angefertigt. Dieser Prototyp wurde zur Demonstration der Betriebseigenschaften mit Leistungen bis 40 kW getestet. Hierbei wurde die Elektrodenspannung mittels Gammaspektroskopie bestimmt und daraus die Shuntimpedanz berechnet. Diese Werte wurden mit anderen Methoden der Shuntimpedanzbes- timmung verglichen. Außerdem wurden alternative RFQ Resonatorkonzepte ebenfalls auf ihre Realisierbarkeit für den Protonenlinac untersucht. Die Einflüsse verschiedener Parameter auf die Betriebsfrequenz, die Möglichkeiten des Frequenztunings und der Einstellung der longitudinalen Spannungsverteilung gefertigter Modelle wurden in einer Diskussion gegenübergestellt.
Die vorliegende Arbeit befasste sich mit der Entwicklung und der Aufbau einer neuartigen Fingerdriftröhren-Struktur als Teil des neuen Vorbeschleunigers COSY-SCL am Kernforschungszentrum in Jülich. In dieser Arbeit wird die Entwicklung der Spiralresonatoren beschrieben, die als Nachbeschleuniger direkt hinter den RFQs zum Einsatz kommen sollen. Als mögliche Option zur Verbesserung der Strahlqualität wurden Fingerdriftröhren vorgeschlagen. Mit Hilfe dieser Struktur ist es möglich, mit geringer zusätzlicher Leistung eine Fokussierung des Ionenstrahls in der beschleunigenden Struktur zu erreichen. Dies war bisher nur bei niedrigen Energien mit der RFQ-Struktur möglich. Bei höheren Energien ist man stets auf magnetische Quadrupollinsen angewiesen. Dies führt jedoch gerade in einem Geschwindigkeitsbereich bis ca. 10 % der Lichtgeschwindigkeit zu Problemen, da die zur Verfügung stehenden Abmessungen zu gering sind. Nachdem zunächst das COSY-SCL Projekt vorgestellt wurde und die grundlegende Theorie für RFQ und Driftröhrenbeschleuniger behandelt wurde, wurden in Kapitel 5 Rechnungen zur Strahldynamik mit dem Programm RFQSIM vorgestellt. Aufgrund der hohen benötigten Gesamtspannung fiel die Entscheidung, einen Vierspaltresonator mit einer geerdeten Mitteldriftröhre aufzubauen. Durch diese Veränderung wurde es möglich, die Feldstärken in den einzelnen Spalten gleichmäßiger zu verteilen und niedriger zu halten, und die benötigte Verlustleistung zu minimieren. Die Teilchendynamik in einem Beschleunigungsspalt mit Fingerelektroden wurde mit einem neuen Transportmodul in RFQSIM untersucht, das den Transport geladener Teilchen durch beliebige dreidimensionale Elektrodenkonfiguration ermöglicht. Mit Hilfe der Fingerdriftröhren ist es möglich, die transversale Ausdehnung des Strahls am Ausgang des Nachbeschleunigers zu verringern und die Anpassung an einen folgenden Beschleuniger zu vereinfachen, ohne das große Einbußen bezüglich der Effektivität der Beschleunigung in Kauf genommen werden müssen. Um die HF Eigenschaften der beiden Beschleunigerstrukturen zu vergleichen, wurden sie mit dem MWS Programm numerisch berechnet. Um genauere Aussagen über die Eigenschaften des elektrischen Feldes zu machen, wurde eine Multipolanalyse der Felder durchgeführt. Damit lässt sich eine Aussage über die Stärke der Fokussierung und mögliche Feldfehler machen. Dabei zeigte sich, dass die auftretenden Feldfehler vernachlässigbar klein sind und sogar störende Effekte unterdrückt werden. Abschließend wurde der Aufbau des Resonators und den daran durchgeführten Messungen auf Meßsenderniveau behandelt. Resultat dieser Untersuchungen ist eine Struktur, die sehr gut und effektiv als Nachbeschleuniger hinter dem RFQ für COSY-SCL eingesetzt werden kann. Durch den Einsatz der Fingerdriftröhren kann mit einer einzelnen Struktur sowohl die Aufgabe der Beschleunigung als auch der Fokussierung bei mittleren Teilchenenergien bewältigt werden. Der neue fokussierende Spiralresonator entspricht in seinen Eigenschaften einer RFQ-Struktur für höhere Teilchengeschwindigkeiten. Die Ergebnisse dieser Arbeit zeigen, wie attraktiv eine solche Lösung mit Fingerdriftröhren ist. Deshalb ist geplant, in einem nächsten Schritt Strahltests durchzuführen, da die beschriebene Driftröhrenstruktur mit ihren Eigenschaften sehr gut für die Beschleunigung von Ionen in dem Geschwindigkeitsbereich zwischen RFQ- und IH Struktur geeignet ist und ein Einsatz z.B. in dem FLAIR Projekt möglich wäre.
Resistive Plate Chambers (RPCs) are gaseous parallel plate avalanche detectors that implement electrodes made from a material with a high volume resistivity between 10 high 7 and 10 high 12 omega cm. Large area RPCs with 2mm single gaps operated in avalanche mode provide above 98% efficiency and a time resolution of around 1 ns up to a flux of several kHz/cm high 2. These Trigger RPCs will, as an example, equip the muon detector system of the ATLAS experiment at CERN on an area of 3650 m high 2 and with 355.000 independent read out channels. Timing RPCs with a gas gap of 0.2 to 0.3mm are widely used in multi gap configurations and provide 99% efficiency and time resolution down to 50 ps. While their performance is comparable to existing scintillator-based Time-Of-Flight (TOF) technology, Timing RPCs feature a significantly, up to an order of magnitude, lower price per channel. They will for example equip the 176 m high 2 TOF barrel of the ALICE experiment at CERN with 160.000 independent read out cells. RPCs were originally operated in streamer mode providing large signals which simplifies readout electronics and gap uniformity requirements. However, high rate applications and detector aging issues made the operation in avalanche mode popular. This was also facilitated by the development of new highly quenching C2F4H2-based gas mixtures with small contents of SF6. While the physics of streamers is difficult to study, the avalanche mode opened the possibility for a detailed simulation of the detector physics processes in RPCs. Even though RPCs were introduced in the early eighties and have been (will be) used in experiments, there are still disagreements about the explanation of several aspects of the RPC performance. The high efficiency of single gap RPCs would require a large ionization density of the used gases, which according to some authors contradicts measurements. Even in the case of a large ionization density the gas gain has to be extremely large, in order to arrive at the observed RPC efficiency. This raises other questions: A very strong space charge effect is required to explain the observed small avalanche charges around 1 pC. Doubts have been raised whether an avalanche can progress under such extreme conditions without developing into a streamer. To overcome these difficulties, other processes, like the emission of an electron from the cathode, were suggested. Moreover, the shape of measured charge spectra of single gap RPCs differs largely from what is expected from the statistics of the primary ionization and the avalanche multiplication. In this thesis we discuss the detector physics processes of RPCs, from the primary ionization and the avalanche statistics to the signal induction and the read out electronics. We present Monte-Carlo simulation procedures that implement the described processes. While the fundament of the described model and some results were already published elsewhere [1], the subject of this thesis is the implementation of the space charge effect. We present analytic formulas for the electrostatic potential of a point charge in the gas gap of an RPC. These formulas were developed in collaboration with the University of Graz [2] and were published in [3, 4]. The simulation model presented in [1] is completed by the dynamic calculation of the space charge field using these formulas. Since the gas parameters like drift velocity and the Townsend and attachment coefficients depend on the electric field, they are calculated dynamically as well. The functional dependence of these parameters on the field is obtained with the simulation programs MAGBOLTZ and IMONTE. For the primary ionization parameters, we use the values that are predicted by the program HEED. While the described procedure only simulates the longitudinal avalanche development towards the anode of the RPC, we also present more dimensional models that allow a careful study of the transverse repulsive and attractive forces of the space charge fields, and of the consequences for the avalanche propagation. We shall show that the efficiencies of single gap Timing RPCs is indeed explained by the high primary ionization density (about 9.5 /cm as predicted by HEED) and a large effective Townsend coefficient (around 113 /mm as predicted by IMONTE). We show that the space charge field reaches the same magnitude as the applied electric field in avalanches at large gas gain. This strong space charge effect effectively suppresses large values for the avalanche charges. The shape of the simulated charge spectra is very similar to the measurements. Also the simulated average charges are close to the experimental results. RPCs are operated in a strong space charge regime over a large range of applied voltage, contrary to wire chambers. We apply only standard detector physics simulations to RPCs. The performance of Timing and Trigger RPCs is well reproduced by our simulations. The results concerning the space charge effect were presented and discussed at the 'RPC 2001' workshop [5] and on the '2002 NSS/MIC' conference [6].
Determination of the structure of complex I of Yarrowia lipolytica by single particle analysis
(2004)
Komplex I enthält ein Flavinmononukleotid sowie mindestens acht Eisen- Schwefel Zentren als redoxaktive Cofaktoren. Da ein wesentlicher Teil des mitochondrialen Genoms für Untereinheiten von Komplex I codiert, betrifft eine Vielzahl von mitochondrialen Erkrankungen diesen Enzymkomplex.
Komplex I wurde bisher aus Mitochondrien, Chloroplasten und Bakterien isoliert. Die Minimalform von Komplex I wird in Bakterien gefunden, wo er aus 14 (bzw 13 im Falle einer Genfusion) Untereinheiten besteht und eine Masse von etwa 550 kDa aufweist. Generell werden sieben hydrophile und sieben hydrophobe Untereinheiten mit über 50 vorhergesagten Transmembranhelices gefunden. Im Komplex I aus Eukaryoten wurde eine grössere Anzahl zusätzlicher, akzessorischer Untereinheiten nachgewiesen. Hier werden die sieben hydrophoben Untereinheiten vom mitochondrialen Genom codiert, während alle anderen Untereinheiten kerncodiert sind und in das Mitochondrium importiert werden müssen.
Die obligat aerobe Hefe Yarrowia lipolytica wurde als Modellsystem zur Untersuchung von eukaryotischem Komplex I etabliert. Die bisher am besten untersuchte Hefe Saccharomyces cerevisiae enthält keinen Komplex I. Hier wird die Oxidation von NADH durch eine andere Klasse von sogenannten alternativen NADH Dehydrogenasen durchgeführt. Auch Y. lipolytica enthält ein solches alternatives Enzym, das allerdings mit seiner Substratbindungsstelle zur Aussenseite der inneren Mitochondrienmembran orientiert ist. Durch molekularbiologische Manipulation konnte eine interne Version dieses Enzymes exprimiert werden, wodurch es möglich ist, letale Defekte in Komplex I Deletionsmutanten zu kompensieren. Mittlerweile wurden alle Voraussetzungen geschaffen, um kerncodierte Untereinheiten von Komplex I aus Y. lipolytica gezielt genetisch zu verändern. Die Proteinreinigung wird durch die Verwendung einer auf einem His-tag basierenden Affinitätsreinigung erheblich erleichtert...
The PANDA experiment at FAIR will perform world class physics studies using high-intensity cooled antiproton beams with momenta between 1.5 and 15 GeV/c. A rich physics program requires very good particle identification (PID). Charged hadron PID for the barrel section of the target spectrometer has to cover the angular range of 22-140° and separate pions from kaons for momenta up to 3.5 GeV/c with a separation power of at least 3 standard deviations. The system that will provide it has to be thin and operate in a strong magnetic field. A ring imaging Cherenkov detector using the DIRC principle meets those requirements. The design of the PANDA Barrel DIRC is based on the successful BABAR DIRC counter with several important changes to improve the performance and optimize the costs. The design options are being studied in detailed Monte Carlo simulation, and implemented in increasingly complex system prototypes and tested in particle beams. Before building the full system prototypes the radiator bars and lenses are measured on the test benches. The performance of the DIRC prototype was quantified in terms of the single photon Cherenkov angle resolution and the photon yield. Results for two full system prototypes will be presented. The prototype in 2011 aimed at investigating the full size expansion volume. It was found that the resolution for this configuration is at the level of in good agreement with ray tracing simulation results. A more complex prototype, tested in 2012, provided the first experience with a compact fused silica prism expansion volume, a wide radiator plate, and several advanced lens options for the focusing system. The performance of the baseline configuration of the prototype with a standard lens and an air gap met the requirements for the PANDA PID for most of the polar angle range but failed at polar angles around 90° due to photon loss at the air gap. Measurements with a prototype high-refractive index compound lens without an air gap at a polar angle of 128° beam angle showed a good resolution of σΘC = 11.8 ± 0.7 mrad and a high photon yield of Nph = 26.1 ± 0.4. Even at polar angles close to 90° the photon yield with this lens exceeded 15 detected photons per particle, meeting the PANDA Barrel DIRC PID requirements for the entire phase space and demonstrating that the compact focusing DIRC is a very promising option for PANDA.
This dissertation presents the development of a new radio frequency quadrupole (RFQ) structure of the 4-rod type with an operating frequency of 108 MHz for the acceleration of heavy ions with mass-to-charge ratios of up to 8.5 at high duty cycles up to CW operation ("continuous wave") at the High Charge Injector (HLI) of the GSI Helmholtz Centre for Heavy Ion Research in Darmstadt.
The need to develop a completely new RFQ for the HLI arises from the fact that with the previously designed and built 4-rod RFQ structure, which was commissioned at the HLI in 2010 as part of the planned HLI upgrade program, the desired operating modes in both pulsed and CW operation could not be achieved even after several years of operating experience and considerable efforts to eliminate or at least mitigate the severe operational instabilities. Mechanical vibrations of the electrodes, which result in strong modulated power reflection, as well as the high thermal sensitivity proved to be particularly problematic.
In addition to the RF design of the new RFQ by simulations performed with the CST Microwave Studio software, the focus of the investigations fell on the mechanical analysis of vibrations on the electrode rods caused by RF operation, for which the ANSYS Workbench software was used. Due to the high thermal load of the RFQ structure of more than 30 kW/m in CW operation, an accurate analysis of the thermal effects on electrode deformation as well as resulting frequency detuning of the resonator is also required, which was investigated by simulations within the capabilities of CST Mphysics Studio.
Based on the results of the design studies carried out by simulations and the thereby achieved design optimizations, a 4-rod RFQ prototype with 6 stems was finally manufactured, on which most of the properties expected from the simulations could be validated by measurements of the RF characteristics as well as of the vibration behavior.
Finally, based on the results of the pre-tests and considering a newly developed beam dynamics concept, a completely revised RF design for a new full-length HLI-RFQ was derived from the prototype design.
Die extrem hohen Interaktionsraten, die mit dem CBM Experiment verfügbar sein werden, erlauben die Messung von einigen der herausfordensten Observablen im Feld der Schwerionenphysik. Im besonderen die Messung von Dileptonen im mittleren Massenbereich ist nahezu unmöglich für eine Vielzahl anderer Experimente, da die extrem kleinen Wirkungsquerschnitte der Produktionskanäle das Auftreten eines messbaren Ereignisses so selten machen, so dass es nicht möglich ist eine ausreichende Anzahl dieser Ereignisse zu messen. Hinzu kommt, dass speziell im Energiebereich des CBM Experiments bisher absolut keine Messdaten verfügbar sind, obwohl es zahlreiche Hinweise von theoretischer Seite und von Messungen bei größeren Kollisionsenergien darauf gibt, dass wir im Energiebereich des CBM Experiments bedeutende Entdeckungen machen k¨onnten. Eine solche Messung dieser Observable könnte einen direkten Zugang zu Informationen bezüglich eines potentiellen Phasenubergangs von hadronischer Materie (bzw. im Hadronengas) in den Zustand eines Quark-Gluonen Plasmas liefern. Zusätzlich bieten Dileptonen noch die Möglichkeit Indikatoren für eine Wiederherstellung der chiralen Symmetrie zu messen...
The development of the designs of the superconducting CH cavities of the HELIAC project from CH0 [27] to CH1 and CH2 [1] has undergone permanent improvements and adaptations based on the learned experiences of each previous cavity. For example, the design of CH1 and CH2 focused on mechanical stabilization and optimization of performance by minimizing peak electric and magnetic fields. As a result, the changes made there were already able to increase stability and performance compared to CH0 by simplifying the design in different ways. The process of designing both cavities was time reasonable, since they are identical in construction and thus only one design had to be developed. However, for both the development and manufacturing of an entire accelerator of individual CH cavities, this type of design would become too time consuming and costly. In order to reduce this time-consuming design process and accelerate the fabrication of superconducting CH cavities, and also reduce costs, a modular cavity design for mass production of superconducting CH cavities was developed as presented in this thesis. In the following section, the conclusions gained in this work and the results already presented will be summarized once again.
So in the first chapters of this thesis the theoretical foundations were laid, which are necessary for the description of superconducting cavities and for their development process, like a theoretical description of superconductivity itself (see chapter 2), the physical basics of RF-acceleration and of the CH cavity (see chapter 3), but also the effects that limit the superconducting cavities in terms of acceleration (see chapter 4) or the properties and laws from structural mechanics needed in later measurements and simulation (see chapter 5). Based on the theoretical foundations given in these sections, all measurements, evaluations and simulations made in the following sections were made.
Cancer has become one of the most fatal diseases. The Heidelberg Heavy Ion Cancer Therapy (HICAT) has the potential to become an important and efficient treatment method because of its excellent “Bragg peak” characteristics and on-line irradiation control by the PET diagnostics. The dedicated Heidelberg Heavy Ion Cancer Therapy Project includes two ECR ion sources, a RF linear injector, a synchrotron and three treatment rooms. It will deliver 4*10 high 10 protons, or 1*10 high 10 He, or 1*10 high 9 Carbons, or 5*10 high 8 Oxygens per synchrotron cycle with the beam energy 50-430AMeV for the treatments. The RF linear injector consists of a 400AkeV RFQ and of a very compact 7AMeV IH-DTL accelerator operated at 216.816MHz. The development of the IH-DTL within the HICAT project is a great challenge with respect to the present state of the DTL art because of the following reasons: • The highest operating frequency (216.816MHz) of all IH-DTL cavities; • Extremely large cavity length to diameter ratio of about 11; • IH-DTL with three internal triplets; • The highest effective voltage gain per meter (5.5MV/m); • Very short MEBT design for the beam matching. The following achievements have been reached during the development of the IH-DTL injector for HICAT : The KONUS beam dynamics design with LORASR code fulfills the beam requirement of the HICAT synchrotron at the injection point. The simulations for the IH-DTL injector have been performed not only with a homogeneous input beam, but also with the actual particle distribution from the exit of the HICAT RFQ accelerator as delivered by the PARMTEQ code. The output longitudinal normalized emittance for 95% of all particles is 2.00AkeVns, the emittance growth is less than 24%, while the X-X’ and Y-Y’ normalized emittance are 0.77mmmrad and 0.62mmmrad, respectively. The emittance growth in X-X’ is less than 18%, and the emittance growth in Y-Y’ is less than 5%. Based on the transverse envelopes of the transported particles, the redesign of the buncher drift tubes at the RFQ high energy end has been made to get a higher transit time factor for this novel RFQ internal buncher. An optimized effective buncher gap voltage of 45.4KV has been calculated to deliver a minimized longitudinal beam emittance, while the influence of the effective buncher voltage on the transverse emittance can be neglected. Six different tuning concepts were investigated in detail while tuning the 1:2 scaled HICAT IH model cavity. ‘Volume Tuning’ by a variation of the cavity cross sectional area can compensate the unbalanced capacitance distribution in case of an extreme beta-lambda-variation along an IH cavity. ‘Additional Capacitance Plates’ or copper sheets clamped on drift tube stems are a fast way for checking the tuning sensitivity, but they will be replaced by massive copper blocks mounted on the drift tube girders finally. ‘Lens Coupling’ is an important tuning to stabilize the operation mode and to increase or decrease the coupling between neighboring sections. ‘Tube Tuning’ is the fine tuning concept and also the standard tuning method to reach the needed field distributions as well as the gap voltage distributions. ‘Undercut Tuning’ is a very sensitive tuning for the end sections and with respect to the voltage distribution balance along the structure. The different types of ‘plungers’ in the 3rd and 4th sections have different effects on the resonance frequency and on the field distribution. The different triplet stems and the geometry of the cavity end have been also investigated to reach the design field and voltage distributions. Finally, the needed uniform field distribution along the IH-DTL cavity and the corresponding effective voltage distribution were realized, the remaining maximum gap voltage difference was less than 5% for the model cavity. The several important higher order modes were also measured. The RF tuning of the IH-DTL model cavity delivers the final geometry parameters of the IH-DTL power cavity. A rectangular cavity cross section was adopted for the first time for this IH-DTL cavity. This eases the realization of the volume tuning concept in the 1st and 2nd sections. Lens coupling determines the final distance between the triplet and the girder. The triplets are mounted on the lower cavity half shell. The Microwave Studio simulations have been carried out not only for the HICAT model cavity, but also for the final geometry of the IH-DTL power cavity. The field distribution for the operation mode H110 fits to the model cavity measurement as well as the Higher Order Modes. The simulations prove the IH-DTL geometrical design. On the other hand, the precision of one simulation with 2.3 million mesh points for full cross section area and the CPU time more than 15hours on a DELL PC with Intel Pentium 4 of 2.4GHz and 2.096GRAM were exploited to their limit when calculating the real parameters for the two final machining iterations during production. The shunt impedance of the IH-DTL power cavity is estimated by comparison with the existing tanks to about 195.8MOmega/m, which fits to the simulation result of 200.3MOmega/m with reducing the conductivity to the 5.0*10 high 7 Omega-1m-1. The effective shunt impedance is 153 MOmega/m. The needed RF power is 755kW. The expected quality factor of the IH-DTL cavity is about 15600. The IH-DTL power cavity tuning measurements before cavity copper plating have been performed. The results are within the specifications. There is no doubt that the needed accuracy of the voltage distribution will be reached with the foreseen fine tuning concepts in the last steps.
The Facility for Antiproton and Ion Research (FAIR) at GSI Darmstadt will provide unprecedented intensities of protons and heavy ions up to uranium at energies of up to 29 GeV for protons and 2.7 GeV/u for Uranium 28+. To achieve high intensities in the synchrotron accelerators, high beam currents have to be provided by the injector linear accelerators. High current heavy ion beams are provided by the Universal Linear Accelerator (UNILAC), which in its current state will not be able to provide the required FAIR beam currents. This thesis deals with the development of upgrades for the UNILAC to ensure its high current capability. The first improvement is a matching section (MEBT) for the interface between the RFQ and the IH-DTL of the existing high current injector HSI at the UNILAC. With this new MEBT section, particle losses are eliminated and the overall beam quality is improved. As a second improvement, a complete replacement of the existing Alvarez-DTL is presented. A combination of efficient IH-type cavities and KONUS beam dynamics results in a reduction of the linac length from about 60 m (Alvarez) to just 23 m (new IH-DTL) while providing the same energy and fulfilling FAIR requirements of a high beam current and beam quality. This thesis contains a detailed beam dynamics design of the new linac including some fundamental investigations of the KONUS beam dynamics concept. A cross-check of the beam dynamics design was performed with two independent multi-particle simulation codes. Detailed error studies were conducted to investigate the influence of manufacturing, alignment and operating errors on the beam dynamics performance. Additionally, all five linac cavities were designed, optimized, and their RF parameters including power requirements calculated to provide a comprehensive linac design.
Im Rahmen dieser Arbeit wurde ein verbessertes Buncher-System für Hochfrequenzbeschleuniger mit niedrigem und mittlerem Ionenstrom entwickelt. Die entwickelte Methodik hat ermöglicht, ein effektives, vereinfachtes Buncher-System für die Injektion in HF-Beschleuniger wie RFQs, Zyklotrons, DTLs usw. zu entwerfen, welches kleine Ausgangsemittanzen und beträchtliche Strahltransmissionen erzielt. Um einen mono-energetischen und kontinuierlichen Strahl aus einer Ionenquelle für den Einschuss in eine Hochfrequenz-Beschleunigerstruktur anzupassen, wird eine Energiemodulation benötigt, die im weiteren Verlauf (Driftstrecke) zur Längsfokussierung des Strahls führt. Durch eine Sägezahnwellenform wird die ideale Energiemodulation aufgrund der linearen Abhängigkeit zwischen der Energie der Teilchen und ihren relativen Phasen erreicht. Dies ist jedoch technologisch nicht möglich, da Teilchenbeschleuniger Spannungsniveaus im Bereich kV bis 100 kV benötigen. Dagegen ist für eine solche Zielsetzung eine räumliche Trennung der sinusförmigen Anregung mit der Grundfrequenz und höheren Harmonischen möglich.
Daher wurde in dieser Arbeit ein verbesserter harmonischer Buncher, der sogenannte „Double Drift Harmonic Buncher - DDHB“ entwickelt, welcher zahlreiche Vorteile hat. Eine geringe longitudinale Emittanz sowie finanzielle Aspekte sprechen für diesen Lösungsansatz. Die Hauptelemente eines DDHB Systems sind zwei Kavitäten, die durch eine Driftlänge L1 getrennt sind, wobei der erste Resonator mit der Grundfrequenz bei -90° synchroner Phase und angelegter Spannung V1 und der zweite Resonator bei der zweiten harmonischen Frequenz mit +90 synchroner Phase und angelegter Spannung V2 betrieben werden. Schließlich ist eine zweite Drift L2 am Ende des Arrays für eine longitudinale Strahlfokussierung am Hauptbeschleunigereingang erforderlich. Somit erfüllt ein solcher Aufbau das angestrebte Ziel einer hohen Einfangseffizienz und einer kleinen longitudinalen Emittanz durch Anpassen der vier Designparameter V1, L1, V2 und L2.
Das Verständnis der Fokussierung, ausgehend von einem Gleichstromstrahl, einschließlich der Raumladungskräfte, ist einer der wesentlichen Bestandteile der Strahlphysik. Viele kommerzielle Codes bieten Simulationsmöglichkeiten in diesem Anwendungsbereich. Ihre Ansätze bleiben jedoch dem Anwender meist verborgen, oder es fehlen wichtige Details zur genauen Abbildung des vorliegenden Konzepts. Daher bestand eine Hauptaufgabe dieser Arbeit darin, einen speziellen Multi-Particle-Tracking-Beam-Dynamics-Code (BCDC) zu entwickeln, bei dem der Raumladungseffekt während des Bunch-Vorgangs, ausgehend von einem DC-Strahl berechnet wird. Der BCDC - Code enthält elementare Routinen wie Drift und Beschleunigungsspalt oder magnetische Linse für die transversale Strahlfokussierung und Raumladungsberechnungen unter Berücksichtigung der Auswirkungen der nächsten Nachbar-Bunche (NNB). Der Raumladungsalgorithmus in BCDC basiert auf einer direkten Coulomb- Gitter-Gitter-Wechselwirkung und Berechnungen des elektrischen Feldes durch Lokalisierung der Ladungsdichte auf einem kartesischen Gitter. Um Genauigkeit zu erreichen, werden die Feldberechnungen in Längsrichtung symmetrisch um das zentrale Bucket (βλ-Größe) erweitert, so dass das Simulationsfeld dreimal so groß ist. Die zentrale Teilchenverteilung wird dann nach jedem Schritt in die benachbarten Buckets kopiert. Anschließend werden die resultierenden Felder im Hauptgitterfeld neu berechnet, indem die elektrischen Felder im Hauptgitterfeld mit denen aus den benachbarten Regionen überlagert werden. Ohne diese Methode würde z. B. ein kontinuierlicher Strahl, welcher jedoch in der Simulation nur innerhalb einer Zelle der Länge βλ definiert ist, zu einer resultierenden Raumladungsfeldkomponente Ez an beiden Rändern der Zelle führen. Ein solches unphysikalisches Ergebnis konnte durch die Anwendung der NNB-Technik bereits weitgehend eliminiert werden. Zusätzlich zum NNB-Feature verfügt das BCDC über eine weitere Besonderheit nämlich die sogenannte Raumladungskompensation (SCC). Aufgrund der Ionisierung des Restgases kommt es entlang des Niederenergiestrahltransports zu einer teilweisen Raumladungskompensation, und zwar am und hinter dem Bunchersystem mit unterschiedlichen Prozentsätzen. Eines der Hauptziele des DDHB-Konzepts besteht darin, es für Hochstromstrahlanwendungen zu entwickeln. Dabei ermöglicht die teilweise Raumladungskompensation, dass das Design in der Praxis höhere Stromniveaus erreicht. Dadurch ist das BCDC-Programm ein leistungsstarkes Werkzeug für Simulationen in künftigen, stromstarken Projekten. Proof-of-Principle-Designs wurden in dieser Arbeit entwickelt.
This Dissertation deals with the development of FAIR-relevant X-ray diagnostics based on the interaction of lasers and particle beams with matter. The associated experimental methods are supposed to be employed in the HIHEX-experiments in the HHT-cave of the GSI Helmholtz Center for Heavy-Ion Research GmbH (GSI) in Phase-0 and in the APPA-cave at the Facility for Antiproton and Ion Research in Darmstadt, Germany.
Diagnostic of high aerial density targets that will be used in FAIR experiments demands intense and highly penetrating X-ray sources. Laser generated well-directe relativistic electron beams that interact with high Z materials is an excellent tool for generation of short-pulse high luminous sources of MeV-gammas.
In pilot experiments carried out at the PHELIX laser system, GSI Darmstadt, relativistic electrons were produced in a long scale plasma of near critical electron density (NCD) by the mechanism of the direct laser acceleration (DLA). Low density polymer foam layers preionised by a well-defined nanosecond laser pulse were used as NCD targets. The analysis of the measured electron spectra showed up to 10- fold increase of the electron "temperature" from T_Hot = 1–2 MeV, measured for the case of the interaction of 1–2 ×10^19 Wcm^(−2) ps-laser pulse with a planar foil, up to 14 MeV for the case when the relativistic laser pulse propagates through the by a ns-pulse preionised foam layer. In this case, up to 80–90 MeV electron energy was registered. An increase of the electron energy was accompanied by a strong increase of the number of relativistic electrons and well-defined directionality of the relativistic electron beam measured to be (12 ±1)° (FWHM). This directionality increases the gamma flux on target by far compared to the soft X-ray sources.
Additionally to laser based active diagnostics, passive techniques involving inherent X-ray fluorescence radiation of projectile and target emitted during heavy-ion target interaction can be used to measure the ion beam distribution on shot. This information is of great importance, since the target size is chosen to be smaller than the beam focus in order to ensure homogeneous heating of the HIHEX-target by the ion beam. High amounts of parasitic radiation and activation of experimental equipment is expected for experiments at the APPA-cave. For this reason, all electronic devices must be placed at a safe distance to the target chamber. In order to transport the signal over a large distance, the X-ray image of the target irradiated by heavy-ions has to be converted into an optical one.
For these purposes, the X-ray Conversion to Optical radiation and Transport (XCOT)-system was developed in the frame of a BMBF-project and commissioned in two beamtimes at the UNILAC, GSI during this work.
In experiments, we observed intense radiation of target atoms (K-shell transitions in Cu at 8–8.3 keV and L-shell transition in Ta) ionised in collisions with heavy ions as well as Doppler-shifted L-shell transitions of Au-projectiles passing through targets. This radiation can be used for monochromatic (dispersive elements like bent crystals) or polychromatic (pinhole) 2D X-ray mapping of the ion beam intensity distribution in the interaction region during the beam-target interaction. We measured the efficiency of the X-ray photon production depending on the target thickness and the number of ions passing through the target. The spatial resolution of the XCOT-system based on the multi-pinhole camera was measured to be (91±17) μm for the image magnification factor M = 2. It was considerably improved by application of a toroidally bent quartz crystal and reached 30 μm at M = 6. This resolution is optimal to image the distribution of a 1mm in diameter ion beam. As next step, the XCOT-system will be tested during the SIS18 beam-time at the HHT-experimental area.
The work presented in this thesis addresses a key issue of the CBM experiment at FAIR, which aims to study charm production in heavy ion collisions at energies ranging from 10 to 40 AGeV . For the first time in this kinematical range, open charm mesons will be used as a probe of the nuclear fireball. Despite of their short decay length, which is typically in the order of few 100 µm in the laboratory frame, those mesons will be identified by reconstructing their decay vertex.
Development of prototype components for the Silicon Tracking System of the CBM experiment at FAIR
(2013)
The CBM experiment at future accelerator facility FAIR will investigate the properties of nuclear matter under extreme conditions. The experimental programm is different from the heavy-ion experiments at RHIC (BNL) and LHC (CERN) that create nuclear matter at high temperatures. In contrast, the study of the QCD phase diagram in the region of the highest net baryon densities and moderate temperatures that is weakly explored will be performed with high precision. For this, collisions of different heavy-ion beams at the energies of 10–45GeV/nucleon with nuclear target will be measured.
The physics programme of the CBM experiment includes measurement of both rare probes and bulk observables that originate from various phases of a nucleus-nucleus collision. In particular, decay of particles with charm quarks can be registered by reconstructing the decay vertex detached from the primary interaction point by several hundreds of micrometers (e.g., decay length c Tau = 123 µm for D0 meson). For this, precise tracking and full event reconstruction with up to 600 charged particle tracks per event within acceptance are required. Other rare probes require operation at interaction rate of up to 10MHz. The detector system that performs tracking has to provide high position resolution on the order of 10 µm, operate at high rates and have radiation tolerant design with low material budget.
The Silicon Tracking System (STS) is being designed for charged-particle tracking in a magnetic field. The system consists of eight tracking station located in the aperture of a dipole magnet with 1T field. For tracks with momentum above 1GeV, momentum resolution of such a system is expected to be about 1%. In order to fulfill this task, thorough optimization of the detector design is required. In particular, minimal material budget has to be achieved.
Production of a detector module requires research and development activities with respect to the module components and their integration. A detector module is a basic functional unit that includes a sensor, an analogue microcable and frontend electronics mounted on a support structure. The objective of the thesis is to perform quality assurance tests of the prototype module components in order to validate the concept of the detector module and to demonstrate its operation using radioactive sources and particle beams.
Double-sided silicon microstrip detectors have been chosen as sensor technology for the STS because of the combination of a good spatial resolution, two-dimensional coordinate measurement achieved within low material budget (0.3%X0), high readout speed and sufficient radiation tolerance. Several generations of double-sided silicon microstrip sensors have been manufactured in order to explore the radiation hard design features and the concept of a large-area sensor compatible with ladder-type structure of the detector module. In particular, sensors with double metal layer on both sides and active area of 62×62mm2 have been produced. Electrical characterization of the sensors has been performed in order to establish the overall operability as well as to extract the device parameters. Current-voltage, capacitance-voltage characteristics and interstrip parameters have been measured.
Readout of the sensors has been done using self-triggering front-end electronics. A front-end board has been developed based on the n-XYTER readout chip with data driven architecture and capable of operating at 32MHz readout rate. The front-end board included an external analog-to-digital converter (ADC). Calibration of the ADC has been performed using both 241Am X-ray source and external pulse generator. Threshold calibration and investigation of temperature dependence of chip parameters has been carried out.
Low-mass support structures have been developed using carbon fibre that has the rigidity to hold the detector modules and introduce minimal Coulomb scattering of the particle tracks. Analogue microcables have been produced with aluminium traces on a polyimide substrate, thus combining good electrical connection with low material budget. Microcable structure includes several layers optimized for low trace capacitance and thus low-noise performance.
A demonstrator tracking telescope has been constructed and operated in several beam tests including 2.5GeV proton beam at COSY synchrotron (Jülich). Three tracking stations have been complemented with several beam hodoscopes. Analysis of the beam data has yielded information on analogue and timing response, beam profile. Tracking and alignment information has been obtained. Beam stability has been evaluated using specially developed monitoring tools.
As a result of conducted studies, performance of the module components have been evaluated and requirements to the detector module have been formulated. Practical suggestions have been made with respect to the structure of the detector module, whereas precise definition of the final detector module design was outside of the scope of this thesis.
A basic introduction to RFQs has been given in the first part of this thesis. The principle and the main ideas of the RFQ have been described and a small summary of different resonator concepts has been given. Two different strategies of designing RFQs have been introduced. The analytic description of the electric fields inside the quadrupole channel has been derived and the limitation of these approaches were shown. The main work of this thesis was the implementation and analysis of a Multigrid Poisson solver to describe the potential and electric field of RFQs which are needed to simulate the particle dynamics accurately. The main two ingredients of a Multigrid Poisson solver are the ability of a Gauß-Seidel iteration method to smooth the error of an approximation within a few iteration steps and the coarse grid principle. The smoothing corresponds to a damping of the high frequency components of the error. After the smoothing, the error term can well be approximated on a coarser grid in which the low frequency components of the error on the fine grid are converted to high frequency errors on the coarse grid which can be damped further with the same Gauß-Seidel method. After implementation, the multigrid Poisson solver was analyzed using two different type of test problems: with and without a charge density. After illustrating the results of the multigrid Poisson solver, a comparison to the field of the old multipole expansion method was made. The multipole expansion method is an accurate representation of the field within the minimum aperture, as limited by cylindrical symmetry. Within these limitations the multigrid Poisson solver and the multipole expansion method agree well. Beyond the limitation the two method give different fields. It was shown that particles leave the region in which the multipole expansion method gives correct fields and that the transmission is affected therefrom as well as the single particle dynamic. The multigridPoisson solver also gives a more realistic description of the field in the beginning of the RFQ, because it takes the tank wall into account, and this effect is shown as well. Closing the analysis of the external field, the transmission and fraction of accelerated particles of the set of 12 RFQs for the two different methods were shown. For RFQs with small apertures and big modulations the two different method give different values for the transmission due to the limitation of the multipole expansion method. The internal space charge fields without images was analyzed at the level of single particle dynamic and compared to the well known SCHEFF routine from LANL, showing major differences for the analyzed particle. For comparing influences on the transmissions of the set of 12 RFQs a third space charge routine (PICNIC) was considered as well. The basic shape of the transmission curve was the same independent of space charge routines, but the absolute values differ a little from routine to routine, with SCHEFF about 2% lower than the other routines. The multigrid Poisson solver and PICNIC agree quite well (less than 1%), but PICNIC has an extremely long running time. The major advantage of the multigrid Poisson solver in calculating space charge effects compared to the other two routines used here is that the Poisson solver can take the effect of image charges on the electrodes into account by just changing the boundaries to have the shape of the vanes whereas all other settings remain unchanged. It was demonstrated that the effect of image charges on the vanes on the space charge field is very big in the region close to the electrodes. Particles in that region will see a stronger transversely defocusing force than without images. The result is that the transmission decreases by as much as 10% which is considerably more than determined by other (inexact) routines before. This is an important result, because knowing about the big effect of image charges on the electrodes it allows it to taken into account while designing the RFQ to increase the performance of the machine. It is also an important factor in resolving the traditional difference observed between the transmission of actual RFQs and the transmission predicted by earlier simulations. In the last chapter of this thesis some experimental work on the MAFF (Munich Accelerator for Fission Fragments) IH-RFQ is described. The machine was assembled in Frankfurt and a beam test stand was built. The shunt impedance of the structure was measured using different techniques, the output energy of the structure were measured and finally its transmission was determined and compared to the beam dynamics simulations of the RFQ. Unfortunately, the transmission measurements were done without exact knowledge of the beam’s emittance. So the comparison to the simulation is somewhat rough, but with a reasonable guess of the emittance a good comparison between the measurement and simulation was obtained.
The laser-driven acceleration of protons from thin foils irradiated by hollow high-intensity laser beams in the regime of target normal sheath acceleration is reported for the first time. The use of hollow beams aims at reducing the initial emission solid angle of the TNSA source, due to a flattening of the electron sheath at the target rear side. The experiments were conducted at the PHELIX laser facility at the GSI Helmholtzzentrum für Schwerionenforschung GmbH with laser intensities in the range from 10^18 to 10^20 W/cm^2. We observed an average reduction of the half opening angle by (3.07±0.42)° or (13.2±2)% when the targets have a thickness between 12 to 14 μm. In addition, the highest proton energies were achieved with the hollow laser beam in comparison to the typical Gaussian focal spot.
Heterodyne array receivers are employed in radio astronomy to reduce the observing time needed for mapping extended sources. One of the main factors limiting the amount of pixels in terahertz receivers is the difficulty of generating a sufficient amount of local oscillator power. Another challenge is efficient diplexing and coupling of local oscillator and signal power to the detectors. These problems are attacked in this dissertation by proposing the application of two vacuum electronic terahertz amplifier types for the amplification of the LO-signal and by introducing a new method for finding the defects in a quasioptical diplexer.
A traveling wave tube (TWT) design based on a square helix slow wave structure (SWS) at 825 GHz is introduced. It exhibits a simulated small-signal gain of 18.3 dB and a 3-dB bandwidth of 69 GHz. In order to generate LO-power at even higher frequencies, the operation of an 850-GHz square helix TWT as a frequency doubler has been studied. A simulated conversion efficiency of 7% to 1700 GHz, comparable with the state-of-art solid-state doublers, has been achieved for an input power of 25 mW.
The other amplifier type discussed in this work is a 1-THz cascade backward wave amplifier based on a double corrugated waveguide SWS. Specifically, three input/output coupler types between a rectangular waveguide and the SWS are presented. The structures have been realized with microfabrication, and the results of loss measurements at 1 THz will be shown.
Diplexing of the LO- and signal beams is often performed with a Martin-Puplett interferometer. Misalignment and deformation of the quasioptical components causes the polarization state of the output signal to be incorrect, which leads to coupling losses. A ray-tracing program has been developed for studying the influence of such defects. The measurement results of the diplexer of a multi-pixel terahertz receiver operated at the APEX telescope have been analyzed with the program, and the results are presented. The program allows the quasioptical configuration of the diplexer to be corrected in order to obtain higher receiver sensitivity.
The Compressed Baryonic Matter (CBM) Experiment will investigate heavy ion collisions and reactions at interaction rates of 100 kHz in a targeted energy range of up to 11 AGeV for systems such as gold-gold or lead-lead. It will be one of the major scientific experiments of the Facility for Antiproton and Ion Research in Europe (FAIR) currently under construction at the site of the GSI Helmholtzzentrum für Schwerionenforschung (GSI) in Darmstadt, Germany. CBM is going to be a fixed target experiment consisting of a superconducting magnet, multiple detectors of various types, and high-performance computing for online event reconstruction and selection. The detector closest to the interaction point of the experiment will be the Micro Vertex Detector (MVD). Consisting of four planar stations equipped with custom CMOS pixel sensors, it will allow to reconstruct the primary vertex with high precision and will help to reconstruct secondary vertices and identify particles originating from conversion in the detector material.
Due to the high interaction rates foreseen for CBM, understanding and minimizing systematic errors due to the detectors’ operating conditions will become all the more important to obtain significant measurement results, as statistical errors in the measurements of many observables are diminishing due to the enormous amount of data available.
Furthermore, the MVD will be the first detector based on CMOS pixel sensors used in a large physics experiment, that will be operated in vacuum. As a result, many aspects of the mechanical and electrical integration of the detector require careful testing and validation.
This thesis addresses both those challenges specifically for the Micro Vertex Detector with the development of a control system for the operation and validation of the MVD prototype “PRESTO” in vacuum. The prototype was selected as device under test as the final MVD is not yet built.
The developed control system helps a) to operate the prototype safely and keep it at the desired working point and b) to record important time-series data of the state of the detector prototype. Those two aspects allow the control system (which might later serve as a ‘blueprint’ for the final detector) to minimize the mentioned systematic errors as much as possible and to contribute to the understanding of remaining systematic errors using correlations with the time-series data. The controlled operation of the prototype in vacuum allowed to validate the integration concepts from a wide range of mechanical and electrical aspects in an endurance test for more than a year with 24/7 operation.
The prototype for this study itself was named “PRESTO” (standing for ‘PREcursor of the Second sTatiOn of the CBM-MVD’). It represents one quadrant of an MVD detector plane, equipped with a total of 15 MIMOSA-26 sensors on the front and back side of a carrier plate. Within this thesis, major parts of the prototype itself were designed. Custom ultra-thin flat flexible cables for data and power were designed and validated. Furthermore, the CNC-machined Aluminium heatsink to mount and cool the prototype design was refined to increase thermal performance. A custom vacuum feedthrough for a total of 21 flat ribbon cables was designed and fabricated. The read-out chain for MIMOSIS-26 was extended to cover a total of 8 sensors with a single and newer TRB-3 FPGA board and was set-up with the prototype. Vacuum equipment including chambers, hoses, pumps, valves and gauges were integrated to form a large vacuum testing system. A cooling circuit for the prototype was assembled comprising an external chiller, hoses, vacuum feedthroughs, as well as temperature, flow and pressure sensors.
The control system was developed to serve the needs of the prototype, while taking the requirements of the final MVD already into account. The main design goals of the control system are:
• compatibility with the other detectors and the overall CBM experiment,
• access to real-time measurements of all necessary parameters (‘process values’),
• reliable, fail-safe operation of the detector,
• recording of all time-series data (‘archiving’),
• cost efficiency and acceptance within the physics community,
• good usability for the users (‘operators’),
• long-term maintainability.
The recorded time-series data of the process variables (i.e. sensor readings) allow a post-measurement analysis of variations in the detector performance. The longterm archiving of all relevant system parameters is therefore of outstanding importance, which is why the software intended for this purpose – called “archiver” – was given special attention in this thesis.
For this reason in particular, it is necessary to implement a comprehensive control system that allows the detector to be operated safely under these conditions and cooled effectively. Before the start of this doctoral thesis, vigilant and extensively trained operators were always necessary for this. The control system that has been developed makes it possible that, after basic training, the detector can also be operated by a less specialised shift supervisor during measurement campaigns.
...
The Compressed Baryonic Matter (CBM) is one of the core experiments at the future Facility for Anti-proton and Ion Research (FAIR), Darmstadt, Germany. Its goal is to investigate nuclear matter characteristics at high net-baryon densities and moderate temperatures. The Silicon Tracking System (STS) is a central detector system of CBM.
It is placed inside a 1Tm magnet and operated at a temperature of about −10 °C to keep radiation-induced bulk current in the 300μm double-sided microstrip silicon sensors low. The design of the STS aims to minimize the material budget in the detector acceptance (2.5° < θ < 25°). In order to do so, the readout electronics is placed outside the active area, and the analog signals are transported via ultra-thin micro-cables. The STS comprises eight tracking stations with 876 modules. Each module is assembled on a carbon fiber ladder, which is subsequently mounted in the C-shaped aluminum frame.
The scope of the thesis focused on developing a modular control system framework that can be implemented for different sizes of experimental setups. The developed framework was used for setups that required a remote operation, like the irradiation of the powering modules for the front-end electronics (FEE), but also in laboratory-based setups where the automation and archiving were needed (thermal cycling of the STS electronics).
The low voltage powering modules will be placed in the vicinity of the experiment, therefore they will experience a total dose of up to 40mGy over the 10 years of STS lifetime.
To estimate the effects of the radiation on the low-voltage module performance, a dedicated irradiation campaign took place. It aimed at estimating the rate of radiation induced soft errors, that lead to the switch off of the FEE.
Regular power cycles of multiple front-end boards (FEBs) pose a risk to the experiment operation. Firstly, such behavior could negatively influence the physics performance but also have deteriorating effects on the hardware. It was further assessed what are the limitations of the FEBs with respect to the thermal cycling and the mechanical stress. The results served as an indication of possible failure modes of the FEB at the end of STS lifetime. Failure modes after repeated cycles and potential reasons were determined (e.g., Coefficient of Thermal Expansion (CTE) difference between the materials).
Due to the conditions inside the STS efficient temperature and humidity monitoring and control are required to avoid icing or water condensation on the electronics or silicon sensors. The most important properties of a suitable sensor candidate are resilience to the magnetic field, ionizing radiation tolerance, and fairly small size.
A general strategy for ambient parameters monitoring inside the STS was developed, and potential sensor candidates were chosen. To characterize the chosen relative humidity sensors the developed control framework was introduced. A sampling system with a ceramic sensor and Fiber Optic Sensors (FOS) were identified as reliable solutions for the distributed sensing system. Additionally, the industrial capacitive sensors will be used as a reference during the commissioning.
Two different designs of FOS were tested: a hygrometer and 5 sensors multiplexed in an array. The FOS hygrometer turned out to be a more reliable solution. One of the possible reasons for a worse performance is a relatively low distance between the subsequent sensors (15 cm) and a thicker coating. The results obtained from the time response study pointed out that the thinner coating of about 15μm should be a good compromise between the humidity sensitivity and the time response.
The implementation of the containerized-based control system framework for the mSTS is described in detail. The deployed EPICS-based framework proved to be a reliable solution and ensured the safety of the detector for almost 1.5 years. Moreover, the data related to the performance of the detector modules were analyzed and significant progress in the quality of modules was noted. Obtained data was also used to estimate the total fluence, which was based on the leakage current changes.
The developed framework provided a unique opportunity to automate and control different experimental setups which provided crucial data for the STS. Furthermore, the work underlines the importance of such a system and outlines the next steps toward the realization of a reliable Detector Control System for STS.
The upcoming CBM Experiment at FAIR aims at exploring the region of highest net baryonic densities reproducible in energetic heavy ion collisions. Due to the very high beam intensities expected at FAIR, unprecedented data regarding rare observables such as charm quarks and hyperons will be accessible. Open charm mesons are particularly interesting, since they support the reconstruction of the total charm cross-section in order to search for exotic phenomena, e.g. a phase transition towards the quark-gluon plasma which is predicted by several theoretical models. Open charm studies will be performed via secondary vertex reconstruction with a suitable Micro-Vertex Detector (MVD). The CBM-MVD is currently in the development and prototyping phase with primary design goals concentrating on spatial resolution, radiation hardness, material budget, and readout performance. CMOS Monolithic Active Pixel Sensors (MAPS) provide an excellent spatial resolution for the MVD in the order of few um in combination with a low material budget (50 um thickness) and high radiation hardness. The active volume of the devices is formed from the epitaxial layer of standard CMOS wafers. This allows for integration of pixels together with analogue and digital data processing circuits on one single chip. This option was explored with the MIMOSA-26 prototype, which integrates functionalities like pedestal correction, correlated double sampling, discrimination and data sparsification based on zero suppression combined with a small and dense pixel matrix. The pixel array composed of 576 lines of 1152 pixels is read out in a column-parallel rolling shutter mode. One discriminator per column and the digital data processing circuits are located on the same chip in a 3 mm wide area beneath the pixel matrix allowing for binary hit encoding. This area also contains the circuits for pedestal correction and the configuration memory, which is programmed via JTAG. The preprocessed digital data is read out via two 80 Mbit/s LVDS links per sensor, which stream their data continuously based on a low-level protocol.
Within the scope of this thesis, a readout concept of the CBM-MVD is proposed and studied based on the current MIMOSA sensor generation. The backbone of the system is formed by the Readout Controller boards (ROCs) featuring FPGA microchips and optical links. Several ROC prototypes are considered using the synergy with the HADES Experiment. Finally, the TRB3 board is selected as a possible candidate for the initial FAIR experiments. Furthermore, a highly scalable, hardware independent FPGA firmware is implemented in order to steer and read out multiple MIMOSA-26 sensors. The reconfigurable firmware is also designed with the support for future MIMOSA sensor generations. The free-streaming sensor data is deserialized and error-checked, prior to its transmission over a suitable network interface. In order to demonstrate the validity of the concept, a readout network similar to the HADES Data Acquisition (DAQ) system is developed. The ROC is tested on the HADES TRB2 boards and data is acquired using suitable MAPS add-on boards and the TrbNet protocol.
In the context of the CBM-MVD prototype project, a readout network with 12 MIMOSA-26 sensors has been prepared for an in-beam test at the CERN SPS facility. A comprehensive control system is designed comprising customized software tools. The subsequent in-beam test is used to validate the design choices. As a result, the system could be operated synchronously and dead-time free for several days. The readout network behavior in a realistic operating environment has been carefully studied with the outcome the the TrbNet based approach handles the MVD prototype setup without any difficulties. A procedure to keep the sensors synchronous even in case of a data overflow has been pioneered as well. After the beam test, improvements and conceptual changes to the readout systems are being addressed which allow an integration into the global CBM DAQ system.
Development of the timing system for the Bunch-to-Bucket transfer between the FAIR accelerators
(2017)
The FAIR project is aiming at providing high-energy beams of ions of all elements from hydrogen to uranium, antiprotons and rare isotopes with high intensities. The existing accelerator facility of GSI and the future FAIR facility employ a variety of circular accelerators like heavy ion synchrotrons (SIS18 and SIS100) and storage rings (ESR, CRYRING, CR and HESR) for the preparation of secondary beams and experiments. Bunches are required to be transferred into rf buckets among GSI and FAIR ring accelerators for different purposes. Without the proper transfer, the beam will be subject to various beam quality deterioration and even to beam losses. Hence, the proper bunch-to-bucket (B2B) transfer between two rings is of great importance for FAIR and is the topic, which has been investigated in this thesis.
These circular accelerators of GSI and FAIR have different ratios in their circumference. For example, the circumference ratio between SIS100 and SIS18 is an integer and between SIS18 and ESR is close to an integer and between CR and HESR is far away from an integer. The ring accelerators are connected via a complicated system of beam transfer lines, targets for the secondary particle production and the high energy separators mentioned above. For FAIR, not only the primary beams are required to be transferred from one ring to another, but also the secondary beams, e.g. the antiproton or rare isotope beams produced by the antiproton (pbar) target, the fragment separator (FRS) or the superconducting fragment separator (Super-FRS). An important topic for this system of accelerators is the proper transfer of beam between the different circular accelerators. Bunches of one ring must be transferred into buckets of another ring within an upper bound time constraint (e.g. 10 ms for most FAIR use cases) and with an acceptable B2B injection center mismatch +-1 degree for most FAIR use cases). Hence, a flexible FAIR B2B transfer system is required to realize the different complex B2B transfers between the FAIR rings in the future. In the focus of the system development and of this thesis is the transfer from SIS18 to SIS100, which can be tested at GSI on the transfer from SIS18 to ESR and from ESR to CRYRING. The system is based on the existing technical basis at GSI, the low-level radio frequency (LLRF) system and the FAIR control system. It coordinates with the Machine Protection System (MPS), which protects SIS100 and subsequent accelerators and experiments from damage caused by high intensity primary beams in case of malfunctioning. Besides, it indicates the beam status and the actual beam injection time for the beam instrumentation and diagnostics.
The conceptual realization of the FAIR B2B transfer system was introduced in this thesis for the first time. It achieves the most FAIR B2B transfers with a tolerable B2B injection center mismatch (e.g. +-1 degree) and within an upper bound time (e.g. 10 ms). It supports two synchronization methods, the phase shift and frequency beating methods. It is flexible to support the beam transfer between two rings with different ratios in their circumference and several B2B transfers running at the same time, e.g. the B2B transfer from SIS18 to SIS100 and at the same time the B2B transfer from ESR to CRYRING. It is capable to transfer beam of different ion species from one machine cycle to another and to transfer beams between two rings via the FRS, the pbar target and the Super-FRS. It allows various complex bucket filling pattern. In addition, it coordinates with the MPS system, which protects the SIS100 and subsequent accelerators or experiments from beam induced damage.
A list of criteria for the preservation of beam qualities during the rf frequency modulation of the phase shift method was analyzed. As an example the beam reaction on three different rf frequency modulation examples were analyzed for SIS18 beams. According to the beam dynamic analysis, there is a maximum value for the rf frequency modulation. The first derivative of the rf frequency modulation must be continuous and small enough and the second derivative must be small enough.
In addition to the analysis from the viewpoint of beam dynamics, two test setups were built. The first test setup was used to characterize the FAIR timing network – white rabbit network for the B2B transfer. In the second test setup, the firmware of the FAIR B2B transfer system was evaluated, which was running on the soft CPU, LatticeMico32, of the Scalable Control Unit - the FAIR standard Front End Controller. Besides, the boundary conditions of the different trigger scenarios of the SIS18 extraction and SIS100 injection kicker magnets were investigated. Finally, the application of the FAIR B2B transfer system for all FAIR use cases was demonstrated.
The dissertation plays a significant important role for the realization of the FAIR B2B transfer system and the further practical application of the system to all FAIR use cases.
The study of the electromagnetic structure of hadrons plays an important role in understanding the nature of matter. In particular the emission of lepton pairs out of the hot and dense collision zone in heavy-ion reactions is a promising probe to investigate in-medium properties of hadrons and in general the properties of matter under such extreme conditions. The first experimental observation of an enhanced di-electron yield in the invariant-mass region 0:3 - 0:7 GeV/c2 in p+Be collisions at 4:9 GeV/u beam energy [2] was announced by the DLS collaboration [1]. Recent results of the HADES collaboration show a moderate enhancement above n Dalitz decay contributions for 12C+12C at 1 and 2 GeV/u [3, 4] confirming the DLS results. There are several theoretical explanations of this observation, most of them focusing on possible in-medium modifications of the properties of vector mesons. At low beam energies the question whether the observed excess is related to any in-medium effects remains open because of uncertainties in the description of elementary di-electron sources. In this work the di-electron production in p+p and d+p reactions at a kinetic beam energy of 1:25 GeV/u measured by the HADES spectrometer is discussed. At Ekin = 1:25 GeV/u, i.e. below the n meson production threshold in proton-proton reactions, the delta Dalitz decay is expected to be the most abundant source above the pi 0 Dalitz decay region. The observed large difference in di-electron production in p+p and d+p collisions suggests that di-electron production in the d+p system is dominated by the n+p interaction. In order to separate delta Dalitz decays and np bremsstrahlung the di-electron yield observed in p+p and n+p reactions, both measured at the same beam energy, has been compared. The main interest here is the investigation of iso-spin effects in baryonic resonance excitations and the off-shell production of vector mesons [5]. We indeed observe a large difference in di-electron production in p+p and n+p reactions. Results of these studies will be compared to recent calculations. We will also present our experimentally defined cocktail for heavy-ion data. At much higher beam energies experimental results of the CERES [6] and NA60 [7] collaborations also show an enhancement in the invariant mass region 0:3 - 0:7 GeV/c2, in principle similar to the situation in DLS. A strong excess of lepton pairs observed by recent high energy heavy-ion dilepton experiments hint to a strong influence of baryons, however no data exist at highly compressed baryonic matter, achievable in heavy-ion collisions from 8 - 45 GeV/u beam energy. These conditions would allow to study the expected restoration of chiral symmetry by measuring in-medium modifications of hadronic properties, an experimental program which is foreseen by the future CBM experiment at FAIR. The experimental challenge is to suppress the large physical background on the one hand and to provide a clean identification of electrons on the other hand. In this work, strategies to reduce the combinatorial background in electron pair measurements with the CBM detector are discussed. The main goal is to study the feasibility of effectively reducing combinatorial background with the currently foreseen experimental setup, which does not provide electron identification in front of the magnetic field.
Der langsame Neutroneneinfang-Prozess (s-Prozess) ist für die Erzeugung von rund der Hälfte der Elemente zwischen Eisen und Blei verantwortlich. Sein Reaktionspfad enthält entlang des Stabilitätstals einige Verzweigungspunkte an instabilen Isotopen, deren Neutroneneinfangquerschnitte die Produktion schwererer Elemente und deren Isotopen-Verhältnisse beeinflussen. Kennt man ihre Zerfalls- und Neutroneneinfangraten unter den angenommenen stellaren Bedingungen ist es möglich, Rückschlüsse auf die physikalischen Umstände während des s-Prozesses zu ziehen. Einer dieser Verzweigungspunkte ist 63-Ni. Die experimentelle Bestimmung des differentiellen Wirkungsquerschnittes für den Neutroneneinfang an diesem Isotop ist das primäre Ergebnis der vorliegenden Arbeit. Der 63-Ni(n,gamma)- Wirkungsquerschnitt hat Einfluss auf die Häufigkeiten von 64-Ni, die Kupfer- und die Zink-Isotope. Die Sensitivität der Produktion dieser Nuklide in s-Prozess-Szenarien wurde ebenfalls im Rahmen dieser Arbeit anhand von Simulationen des entsprechenden Nukleosynthesenetzwerkes untersucht. Zudem wurde die Datenlage für s-Prozess-Modelle mit einer Flugzeit-Messung des 63-Cu(n,gamma)-Wirkungsquerschnitts erweitert.
Die beiden Experimente zur Querschnittsbestimmung von 63-Ni und 63-Cu fanden am Los Alamos Neutron Science Center in New Mexico, USA statt. Eine aus angereichertem 62-Ni hergestellte 63-Ni-Probe wurde im Rahmen einer Flugzeit-Messung gepulst mit Neutronen bestrahlt. Der Nachweis der prompten Gammastrahlung aufgrund von Neutroneneinfängen erfolgte mit dem 4π-BaF_2-Detektor DANCE. Die kalorimetrische Messung macht den Q-Wert der Reaktion für jedes Einfangereignis zugänglich und erlaubt die Unterscheidung von Ereignissen verschiedener Isotope. Es konnte gezeigt werden, dass diese Methode die Bestimmung von Querschnitten selbst mit Proben ermöglicht, die nur zu einem Bruchteil aus dem zu untersuchenden Isotop bestehen. Der 63-Ni(n,gamma)-Wirkungsquerschnitt wurde für den Energiebereich von 40 eV bis 500 keV mit einer maximalen Unsicherheit von 15% bestimmt. Es zeigte sich, dass theoretische Abschätzungen den Querschnitt bislang um etwa einen Faktor 2 unterschätzten. In demselben Energiebereich konnte der 63-Cu(n,gamma)-Wirkungsquerschnitt mit einer maximalen Unsicherheit von 8% vermessen werden.
Das Strahldynamikdesign für den MYRRHA-Injektor wurde im Hinblick auf eine hohe Zuverlässigkeit und Verfügbarkeit, sowie eine verbesserte Strahlausgangsemittanz, neu entwickelt und erfüllt nun die Anforderungen des Kernreaktors.
In der statistischen Fehleranalyse zeigt sich die Strahldynamik der CH-Sektion als äußerst robust und liefert selbst unter pessimistischen Fehlerannahmen eine Transmission von über 99,9 %.
Das neue Injektorkonzept bietet wesentliche Vorteile gegenüber dem in „MAX Referenzdesign 2012“ vorgestellten Injektordesign und wird als neues „MAX Referenzdesign 2014“ für den MYRRHA-Injektor verwendet. Die guten strahldynamischen Eigenschaften des neuen Injektordesigns konnten in Vergleichsrechnungen mit TraceWin am IN2P3@CNRS1 (Institut National de Physique Nucléaire et de Physique des Particules @ Centre National de la Recherche Scientifique, Orsay, Frankreich) bestätigt werden.
Neben der Strahldynamik wurde das HF-Design für die benötigten Beschleunigerkavitäten entwickelt und ebenfalls für eine hohe Zuverlässigkeit und Verfügbarkeit optimiert. Das HF-Design der CH-Strukturen ist für eine größtmögliche Ausfallsicherheit auf den Betrieb mit niedrigen elektrischen Feldgradienten, weit unterhalb der technischen Leistungsgrenzen und Möglichkeiten der jeweiligen Kavität, ausgelegt.
Im Rahmen dieser Arbeit wurde die katalytische Wirkung von massenselektierten Edelmetallclustern in photographischen Entwicklern an möglichst praxisnahen photographischen Modellsystemen untersucht, um die bei der Belichtung und der anschließenden Entwicklung von photographischen Filmmaterialien ablaufenden Prozesse besser verstehen zu können. Hierzu wurden präformierte und anschließend massenspektrometrisch größenselektierte Edelmetallclusterionen sanft auf photographische Emulsionskörner aufgebracht und anschließend untersucht, wie die deponierten Clusterionen die chemische Reduktion dieser gelatinefreien Silberhalogenid-Mikrokristalle im Entwickler beeinflussen. Apparatives Kernstück ist eine in den letzten drei Jahren in der Arbeitsgruppe von Prof. L. Wöste an der Freien Universität in Berlin entwickelte Anlage mit der es möglich ist, Edelmetallcluster definierter Größe in so ausreichender Menge durch Sputtern zu erzeugen, daß auch nach kurzen Depositionszeiten genügend viele Cluster auf Oberflächen deponiert werden können. Hohe Teilchenströme von Silbercluster-Kationen wurden über einen weiten Größenbereich (Ag1 + -Ag34+) erzeugt. Der Silbercluster mit der geringsten Intensität im Spektrum, das besonders interessante Ag4 +, wurde mit einem Clusterstrom von 800 pA bei guter Massenauflösung erzeugt. Für Silbercluster-Anionen erzielt man annähernd die gleichen Teichenströme wie für die entsprechenden -Kationen. Durch Sputtern von Gold-Silber-Mischtargets ließen sich AunAgm+-Clusterionen bis zu einer Masse von 2200 amu erzeugen. Um die Forderung nach einem langsamen Aufbringen der Cluster auf die Oberfläche („soft landing“) zu erfüllen, wurden die Cluster mit Hilfe von zwei mit Stoßgas gefüllten Quadrupolen abgebremst. Durch die so verwirklichte sanfte Deposition der Cluster ist es erstmals gelungen, die photographische Wirkung der auf primitive Emulsionskörner deponierten Cluster in definierter, reproduzierbarer und daher aussagekräftiger Weise zu untersuchen. Das war möglich, weil die Depositionsenergien der Cluster (< 1 eV) unterhalb der Bindungsenergien der hier deponierten Edelmetallcluster liegen und somit eine Verfälschung der Resultate durch Fragmentation der Clusterionen ausgeschlossen werden konnte. Es konnte nachgewiesen werden, daß erst ab Depositionsenergien von ³ 5 eV eine vermehrte Fragmentation der Cluster zu erwarten ist. Ob ein Silbercluster an einem Emulsionskorn dessen bevorzugte Entwickelbarkeit einleitet, hängt nicht nur von der Größe des Aggregates und seiner Ladung ab, sondern auch vom Redoxpotential des photographischen Entwicklers. Positiv geladene Silbercluster aus mindestens vier Atomen (Agn+, n³4) katalysieren den Entwicklungsprozeß der Emulsionskörner bei Redoxpotentialen, die negativer als -310 mV (Ag/AgCl-Referenzelektrode) sind. Aber auch Ag3+-Cluster führen noch zu einer Entwickelbarkeit, wenn das Redoxpotential unterhalb -350 mV liegt. Im Gegensatz zu Ag3+-Clustern können Ag3--Cluster, ebenso wie Ag4+-Cluster, die Entwicklung bereits bei einem Redoxpotential von -310 mV katalysieren. Kleinere Silberaggregate, ob positiv oder negativ geladen, führen nicht zu einer bevorzugten Entwickelbarkeit der mit ihnen belegten Silberhalogenidkörner. Ein Einfluß der Kornmorphologie (Kuben, Oktaeder, T-grains) auf die kritische Clustergröße konnte nicht nachgewiesen werden. Erstmals war es auch möglich, Gold-Silber-Mischclusterionen auf ihre photographische Wirkung hin zu untersuchen. Dabei zeigte sich, daß die katalytische Wirkung von Gold-Silber-Mischclusterionen auf die Entwickelbarkeit der sie enthaltenden Emulsionskörner allein durch den Silberanteil der Cluster bestimmt wird. Mischcluster Ag1Aum+ (m³2) und Ag2Aum+ (m³1) katalysieren die Entwicklung nicht, unabhängig vom Redoxpotential. Dagegen leiten Ag3Aum + (m³2), entsprechend den Agn+-Clustern (n³4) bei Redoxpotentialen negativer als -310 mV die Entwicklung ein. Mischcluster mit höherem Silberanteil (AgnAum+; n³4, m³1) ändern ihre katalytische Wirkung gegenüber reinen Silberclustern entsprechender Größe nicht. Erstmals konnte auch der Begriff „Goldlatensifikation“ präzisiert werden. Die hier gefundnen Ergebnisse zeigen eindeutig, daß von einer solchen nur dann gesprochen werden kann, wenn sich die Goldatome an das Trimer anlagern. Dagegen kann die alleinige Substitution von Silber durch Gold sowohl als empfindlichkeitssteigernder Mechanismus bei der Goldlatensifikation als auch bei der Goldreifung ausgeschlossen werden. Reine Goldcluster-Kationen bis zum Au7 + zeigen keine katalytische Wirkung.
Gegenstand dieser Arbeit war die Untersuchung der optischen und elektronischen Eigenschaften von metallorganischen Materialien, die mit dem Verfahren der Elektronenstrahlinduzierten Deposition hergestellt wurden. Da es sich bei diesen noch relativ unerforschten Endprodukten um Materialmengen von wenigen Nanogramm Gewicht und geometrische Abmessungen im Sub-µm-Bereich handelt, wurden hierzu neue Verfahren der Herstellung, Strukturierung und Charakterisierung entwickelt. Sowohl die optischen als auch die elektronischen Eigenschaften dieser Deponate besitzen einen gemeinsamen physikalischen Nenner in ihrer inneren Morphologie: ein nanokristallines dielektrisches Verbundmaterial, das aus metallischen Kristalliten und organischen Polymeren gebildet wird. Im Hinblick auf die Durchführung der Untersuchungen war das Augenmerk auf zwei potentielle industrielle Anwendungen gerichtet: den Photonischen Kristallen und den Einzelelektronen-Phänomenen bei Raumtemperatur. Mit Hilfe von Beugungsexperimenten im Fernfeld wird ein Verfahren gezeigt, das eine der periodischen Struktur von Photonischen Kristallen angepaßte Charakterisierung von Materialstrukturen mit optischer Bandlücke ermöglicht. Das mathematische Grundgerüst bildet dabei eine rigorose Streutheorie, die als Lösung der Helmholtz-Gleichung an dielektrischen Zylindern mit wenigen hundert nm Durchmesser den Experimenten zugrunde gelegt wird und sowohl für die praktische Dimensionierung des Versuchsaufbaus als auch für die theoretische Auswertung der Meßdaten, z.B. für die Brechungsindexbestimmung, dient. Die Herstellung und Kontrolle der Eigenschaften von Einzelelektronen-Tunnelelementen (SETs, Single Electron Tunneling Devices), welche bei hohen Temperaturen mit einer abzählbar kleinen Anzahl von Elektronen noch arbeiten, dürfte wohl eine der größten Herausforderungen in der heutigen Festkörperelektronik sein. Obwohl die Idee dazu, auf Basis der "Orthodoxen Theorie", bis auf die 80er Jahre des vergangenen Jahrhunderts zurückgeht, konnten nennenswerte Ergebnisse nur unter "Laborbedingungen" mit entsprechend hohem experimentellem Aufwand erzielt werden. In der vorliegenden Arbeit wird ein neuer Weg gegangen, um die beiden wesentlichen Bedingungen der orthodoxen Theorie, nämlich die Kleinheit der Kapazitäten und hohe Tunnelwiderstände, durch das ungeordnete nanokristalline Netzwerk der metallorganischen Deponate zu erfüllen. Die Motivation hierzu liegt in der hochohmigen organischen Matrix der Deponate, die mit darin eingebetteten elektrisch isolierten Nanokristalliten (die mit Durchmessern zwischen 1 nm und 2.5 nm ausgezeichnete Quantenpunkte bilden) eine ideale Umgebung für den Betrieb von Einzelelektronen-Tunnelelementen bereitstellen. Ein stabiles Verhalten unter hohen Temperaturen und eine ausgeprägte Resistenz gegen quantenmechanische Fluktuationen (z. B. dem Co-Tunneln oder Hintergrundladungen) wird durch den Aufbau von nanokristallinen Netzwerken, die in der Arbeit als "Über-SET" bezeichnet werden, erreicht. Mit Hilfe der entwickelten speziellen Technik lassen sich Nanokristallite elektrisch bis zur quantenmechanischen Tunnelgrenze voneinander isolieren und als Quantenpunkte betreiben. Die dabei beobachtbaren Phänomene sind diskretisierte I/U-Kennlinien und das Blockade-Verhalten der Spannung bei Raumtemperatur, deren Entstehung in Monte-Carlo-Simulationen auf zwei physikalische Grundprinzipien zurückgeführt wird: der Ausbildung von Einfangzuständen (Traps) für Elektronen an Grenzstellen und dem Mechanismus des negativen differentiellen Widerstandes (NDR, Negative Differential Resistance). Beide Effekte fungieren in einer gegenseitigen Kombination zueinander durch Coulomb-Wechselwirkungen zu einem mikroskopischen Schalter für den gesamten Strom.
Aufgebautes Zwei-Farben Lasersystem: Das für diese Arbeit aufgebaute Zwei-Farben Lasersystem erfüllt im Hinblick auf Abstimmbarkeit wie auch auf die erreichbare Ausgangsleistung die für diese Arbeit gesetzten Ziele. Für weiterführende Experimente muss allerdings berücksichtigt werden, dass für eine Steigerung der Ausgangsleistung, wie auch eine weiterführende Stabilisierung weitere Untersuchungen nötig sind, bei denen aber das jetzige System als Grundlage dienen kann und die mit ihm gewonnenen Erkenntnisse berücksichtigt werden müssen. Auch die verwendete Nahfeld-Beleuchtung erfüllt vor allem mit der automatischen Steuerung verknüpft wertvolle Dienst bei der Charakterisierung der untersuchen LT-GaAs Photomischer. Dieses System ist allerdings nicht geeignet, als direkter Entwurf für das endgültige System des SOFIA- oder ALMA-Projektes anzusehen, was auch nie seine Aufgabe war. Numerische Simulation: Die in dieser Arbeit vorgestellte numerische Simulation des DC-Stromverhaltens stellt einen guten Ansatz dar, die Effekte, die durch eine inhomogene Beleuchtung der Photomischer bedingt durch die verwendete Glasfaser entstehen, quantitativ und qualitativ zu erfassen und sie mit realen Photomischern und den durchgeführten Messungen in Verbindung zu bringen. Durchgeführte Nahfeld-Messungen: Die in dieser Arbeit vorgestellten automatischen Nahfeld-Messungen über einen 1D- und 2D-Bereich ermöglichen mit Hilfe des aufgebauten Lasersystems die in dieser Arbeit untersuchten LT-GaAs Photomischer in ihrem Verhalten zu untersuchen, wie es auch möglich ist, ein vollständiges Kennlinien-Feld aufzunehmen.
The HADES (High Acceptance DiElectron Spectrometer) is an experimental
apparatus installed at the heavy-ion synchrotron SIS-18 at GSI, Darmstadt.
The main physics motivation of the HADES experiment is the measurement
of e+e− pairs in the invariant-mass range up to 1 GeV/c2 in heavy-ion collisions
as well as in pion and proton-induced reactions.
The HADES physics program is focused on in-medium properties of the light
vector mesons ρ(770), ω(783) and φ(1020), which decay with a small branching
ratio into dileptons. Dileptons are penetrating probes which allow to study
the in-medium properties of hadrons. However, in heavy-ion collisions, the
measurement of such lepton pairs is difficult because they are rare and have a
very large combinatorial background.
Recently, HADES has been upgraded with new detectors and new electronics
in order to handle higher intensity beams and reactions with heavy nuclei up
to Au.
HADES will continue for a few more years its rich physics program at its
current place at SIS-18 and then move to the upcoming international Facility
for Antiproton and Ion Research (FAIR) accelerator complex. In this context
the physics results presented in this work are important prerequisites for the investigation
of in-medium vector meson properties in p + A and A+A collisions.
This work consists of five chapters. The first chapter introduces the physics
motivation and a review of recent physics results. In the second chapter, the
HADES spectrometer is described and its sub-detectors are presented. Chapter
three deals with the issue of lepton identification and the reconstruction of
the dielectron spectra in p + p collisions is presented. Here, two reactions
are characterized: inclusive and exclusive dilepton production reactions. From
the spectra obtained, the corresponding cross sections are presented with the
respective statistical and systematical errors. A comparison with theoretical
models is included as well. Conclusions are given in chapter four.
The final part of this work is dedicated to the HADES upgrade, whose goal
is among others the achievement of a reliable and fast data acquisition of the
Multiwire Drift Chambers (MDCs). Chapter five presents my contribution to
this successful project during the three years of my stay at GSI.
Der Urknall vor ungefähr 13.8 Milliarden Jahren markiert die Entstehung des Universums. Die gesamte Energie und Materie war in einem Punkt konzentriert und expandiert seitdem kontinuierlich. Wenige Sekundenbruchteile nach dem Urknall war die Temperatur und Dichte dieser Materie extrem hoch und die erschaffenen Elementarteilchen, speziell Quarks und Gluonen, durchliefen einen Zustand den man als Quark-Gluon-Plasma (QGP) bezeichnet und innerhalb dessen die starke Wechselwirkung dominiert. Innerhalb dieses Plasmas können Quarks und Gluonen, welche sonst in Hadronen gebunden sind, sich frei bewegen. Die direkte Beobachtung des frühzeitlichen QGPs ist mit heutigen Mitteln nicht möglich. Allerdings ist es möglich die Dynamik und Kinematik innerhalb eines künstlich erzeugten QGPs zu erforschen und damit Rückschlüsse auf die Vorgänge während des Urknalls zu machen.
Um künstliche QGPs unter kontrollierten Bedingungen zu erzeugen, werden heutzutage ultrarelativistische Schwerionen zur Kollision gebracht. Der stärkste je gebaute Schwerionenbeschleuniger LHC befindet sich am Kernforschungzentrum CERN in der Nähe von Genf. Das ALICE Experiment, als eines der vier großen Experimente am LHC, wurde speziell gebaut um das QGP näher zu untersuchen. Vollständig ionisierte Bleikerne werden mit nahezu Lichtgeschwindigkeit in den Experimenten zur Kollision gebracht. Die deponierte Energie lässt die Temperatur der Quarks und Gluonen innerhalb der kollidierenden Nukleonen ansteigen bis eine kritische Temperatur überschritten wird und ein Phasenübergang in das QGP erfolgt. Im Laufe der Kollision kühlt das Medium ab und gelangt unter die kritische Temperatur. Nun werden aus den ehemals freien Quarks Hadronen gebildet. Diese Hadronen oder Zerfallsprodukte dieser Hadronen können daraufhin in die Detektoren des Experiments fliegen und werden dann dort gemessen.
Es gibt mehrere mögliche Observablen des QGP, die messbar mit dem ALICE Experiment sind. Die Observablen, die in dieser Arbeit detailliert untersucht werden, sind die invariante Masse und der Paartransversalimpuls eines Dielektrons. Ein Dielektron besteht aus einem Elektron und einem Positron, welche miteinander korreliert sind. Dielektronen sind ideale Sonden zur Vermessung des QGPs. Sie werden durch verschiedene Prozesse während allen Kollisionsphasen produziert, wie beispielsweise bei den initialen, harten Stößen der kollidierenden Nukleonen oder durch den elektromagnetischen Zerfall verschiedener Hadronen wie π0 und J/ψ. Zusätzlich strahlt das QGP Dielektronen abhängig von seiner Temperatur ab. Theoretisch erlaubt dies die direkte Temperaturmessung des QGPs. Ein weiterer Vorteil der Dielektronenmessung gegenüber der Messung von Hadronen liegt darin, dass Elektronen und Positronen keine Farbladungen tragen und somit auch nicht mit der dominierenden starken Wechselwirkung innerhalb des QGPs interagieren und somit unbeeinflusst Informationen über seine Dynamik liefern können.
In dieser vorliegenden Arbeit werden Dielektronenspektren als Funktion der invarianten Masse und des Paartransversalimpulses in Blei-Blei-Kollisionen mit einer Schwerpunktsenergie von √sNN = 5.02 TeV gemessen. Das erste Mal in Schwerionenkollisionen konnte an einem der großen LHC Experimente der minimale Transversalimpuls der gemessenen Elektronen und Positronen auf peT > 0.2 GeV/c minimiert werden. Dies gibt im Vergleich zu der publizierten Messung mit peT > 0.4 GeV/c die Möglichkeit auch sogenannte weiche Prozesse zu messen, erhöht aber auch den Komplexit ätsgrad der Messung durch massiv gesteigerten Untergrund. Zusätzlich ist die Messung zentralitäsabhängig durchgeführt. Zentralität ist ein Maß für den Abstand der beiden Bleikerne zum Zeitpunkt der Kollision. Je zentraler eine Kollision, desto größer ist die deponierte Energie und desto größer und heißer ist das erzeugte QGP und die daraus resultierenden Effekte.
Die gemessenen Dielektronenverteilungen werden mit dem erwarteten Beiträgen aus hadronischen Zerfällen verglichen. Die Messung ergibt, dass der Beitrag aus semileptonischen Zerfällen von Charmquarks gemessen im Vakuum, welcher mit der Anzahl der binären Nukleon-Nukleon-Kollisionen in Blei-Blei-Ereignissen hochskaliert ist, nicht das Dielektronenspektrum beschreibt. Eine Modifizierung des Beitrag gemäß des unabhängig gemessenen nuklearen Modifikationsfaktors für einzelne Elektronen aus Charm- und Beautyquarks verbessert die Beschreibung des Dielektronenspektrums. Zusätzlich wurde der Beitrag virtueller direkter Photonen abgeschätzt. Die gemessenen Werte sind vergleichbar mit vorangegangenen Messungen bei einer niedrigeren Schwerpunktsenergie. Ebenso ist es möglich in periphären Kollisionen einen Beitrag durch eine Quelle zu vermessen, die Dielektronen bei niedrigem Transversalimpuls pT,ee < 0.15 GeV/c aussendet.
Die Untersuchung der Eigenschaften von Hadronen und ihren Konstituenten (Quarks und Gluonen) in heißer und/oder dichter Kernmaterie ist eines der Hauptziele der Physik mit schweren Ionen. Der Zustand dichter und heißer Materie kann im Labor für kurze Zeit in der Reaktionszone von relativistischen Schwerionenkollisionen geschaffen werden. Einen Einblick über die Eigenschaften der starken Wechselwirkung und über die Massenerzeugung der Hadronen geben Dileptonen-Experimente, da Leptonen nicht von der starken Wechselwirkung beeinflusst werden. Unabhängig von der Strahlenergie zeigen die invarianten Massenspektren der Dileptonen in Schwerionenkollisionen im Vergleich zur Superposition der erwarteten hadronischen Zerfälle im Vakuum einen Überschuss im invarianten Massenbereich 0,2 - 0,6 GeV/c². Während dieser Überschuss bei CERN-SPS Energien in Zusammenhang mit der In-Medium-Modifikation der Spektralfunktion des Rho-Mesons gebracht wird, konnte die hohe Zahl der Dileptonen, die von der DLS Kollaboration in C + C und Ca + Ca bei 1 GeV/u beobachtet wurde, bis zum Erscheinen der HADES Daten nicht zufrieden stellend erklärt werden. Die Diskrepanz zwischen experimentellen Daten und Transportrechnungen erhielt den Namen "DLS Puzzle". In diesem Zusammenhang wurde eine kontroverse Diskussion über die Validität der Ergebnisse der DLS Kollaboration geführt. Das HADES Detektorsystem (High Acceptance Di-Electron Spectrometer), das sich am Schwerionensynchroton der Gesellschaft für Schwerionenforschung (GSI) in Darmstadt befindet, ist zur Zeit das einzige Experiment, das Dielektronen bei Projektilenergien von 1 - 2 GeV/u misst. Es tritt somit die Nachfolge des DLS Experiments an. Jedoch ist HADES durch zahlreiche technische Verbesserungen, u.a. Massenauflösung und Akzeptanz, im Vergleich zum Spektrometer DLS ein Experiment der 2. Generation. Erste Ergebnisse der Messung 12C + 12C bei 2 GeV/u der HADES Kollaboration bestätigen den generellen Trend einer erhöhten Zählrate im Vergleich zu den erwarteten Beiträgen von hadronischen Zerfällen. Es stellt sich die Frage, wie sich diese Beobachtung zu kleineren Strahlenergien hin fortsetzt. Im Rahmen der vorliegenden Arbeit wird die mit dem HADES Detektorsystem durchgeführte Messung der Dielektronenproduktion in der Schwerionenkollision 12C + 12C bei einer Projektilenergie von 1 GeV/u ausgewertet. Wesentliche Zielsetzungen sind u. a. die Überprüfung der DLS Daten und die Bestimmung der Anregungsfunktion des Überschusses. In der Analyse wird demonstriert, dass Leptonen effizient nachgewiesen werden. Die dargestellte Paaranalyse zeigt, dass der kombinatorische Untergrund erfolgreich reduziert und die Menge der wahren Dielektronen weitgehend erhalten werden kann. Nach Abzug des kombinatorischen Untergrundes werden die effizienzkorrigierten und normierten invarianten Massen-, Transversalimpuls- und Rapiditätsverteilungen der Dielektronen untersucht. Die Ergebnisse werden mit hadronischen Cocktails verschiedener theoretischer Ansätze verglichen. Diese beinhalten die Beiträge kurz- und langlebiger Dileptonenquellen einer thermischen Quelle (PLUTO) sowie mikroskopische Transportrechnungen (HSD,IQMD). Im Massenbereich 0,2 - 0,6 GeV/c² wird der gemessene Überschuss relativ zu den Vorhersagen bestätigt. Zusammen mit den Ergebnissen der Messung 12C + 12C bei 2 GeV/u zeigt sich, dass der Überschuss mit abnehmender Strahlenergie relativ zunimmt. Eine detaillierte Analyse zeigt, dass der Überschuss in dem Massenintervall 0,15 - 0,5 GeV/c² als Funktion der Projektilenergie entsprechend der Zahl der produzierten neutralen Pionen und nicht wie die Zahl des Eta-Mesons skaliert. Der direkte Vergleich der HADES mit den DLS Ergebnissen zeigt, dass die Daten der vorliegenden Arbeit mit den für lange Zeit angezweifelten DLS Resultaten übereinstimmen. Die Frage nach dem physikalischen Ursprung des Überschusses rückt somit erneut in den Vordergrund. In diesem Zusammenhang ist das Studium der Dileptonenproduktion in elementaren Reaktionen p + p und d + p wichtig. Neuere Rechnungen mit einem One Boson Exchange (OBE) Modell deuten darauf hin, dass die Beiträge von p-p und hauptsächlich p-n zur Bremsstrahlung signifikant höher sind als bisher vermutet. Eine aktualisierte Transportrechnung (HSD), deren Parametrisierung der Bremsstrahlung durch dieses OBE Resultat inspiriert ist, scheint in der Lage zu sein, die Ergebnisse der Messungen 12C + 12C bei 1 GeV/u der HADES und DLS Kollaboration recht gut zu beschreiben. Die entsprechenden Vergleiche sind dargestellt und werden diskutiert. Aber auch die Transportrechnung IQMD erklärt die HADES Daten recht gut. Daher ist es offensichtlich, dass eine direkte Gegenüberstellung der OBE Modellrechnungen und der von der HADES Kollaboration gemessenen und derzeit analysierten Daten zur Dileptonenproduktion in p + p und d + p Reaktionen erforderlich ist. Nur so können sichere Schlüsse über den Ursprung der Dileptonen bei SIS Energien gezogen werden.
In dieser Arbeit konnten erstmals differentielle Ionisationswirkungsquerschnitte für Antimaterie-Materie-Stöße gemessen werden. Mit Hilfe der COLd Target Recoil Ion Momentum Spectroscopy (COLTRIMS) wurden die Stoßsysteme p± + He ® p± + He+1 + ebei einer Einschußenergie von etwa 1 MeV untersucht. Die experimentellen Ergebnisse für die Einfachionisation von Helium durch Antiprotonenstöße werden mit denen für Protonenstöße verglichen. Dies erlaubt den Stoßmechanismus in Abhängigkeit von der Richtung der störenden Kraft zu studieren. Als Ergebniss konnte die Post-Collision-Interaction (PCI) in der longitudinalen Richtung des Stoßes (Projektilrichtung) quantitativ bestimmt werden. Trotz der großen experimentellen Schwierigkeiten (hochenergetischer Antiprotonenstrahl, geringer Antiprotonenstrom, große Strahldivergenz und Strahlungsuntergrund durch Antiprotonenzerfall) konnten absolute die Wirkungsquerschnitte in Abhängigkeit vom Longitudinalimpuls gemessen werden. Innerhalb der experimentellen Fehler zeigen die Longitudinalimpulsverteilungen keine Abhängigkeit vom Projektilvorzeichen. Die folgende Tabelle faßt die mittleren Impulse des Elektrons und des Rückstoßions für Antiprotonen- und Protonenstöße zusammen Rückstoßion Elektron Antiproton 0.07±0.045 a.u. 0.087±0.039 a.u. Proton 0.075±0.025 a.u. 0.075±0.007 a.u. Die Tabelle zeigt, daß nach dem Stoß die Elektronen in beiden Stoßsystemen etwas nach vorne emittiert werden. Das steht im Widerspruch zu den theoretischen Vorhersagen, wonach erwartet wird, daß die Elektronen im Protonenstoß etwas nach „vorne“ und im Antiprotonenstoß etwas nach „hinten“ emittiert werden. Das Rückstoßion agiert in beiden Systemen als Beobachter. Dies widerspricht ebenfalls den Vorhersagen, wonach erwartet wird, daß das Rückstoßion im Protonenstoß etwas nach hinten und im Antiprotonenstoß etwas nach vorne emittiert wird. Die experimentellen Ergebnisse zeigen eine bessere Übereinstimmung mit den Continuum-Distorted-Wave (CDW) Rechnungen als mit den Classical- Trajectory-Monte-Carlo (CTMC) Rechnungen. Im Vergleich zur Stößen mit schnellen hochgeladenen Ionen zeigen die Daten dieser Arbeit, daß die Elektronen die Impulsverluste des Projektils kompensieren, während in hochgeladenen Ion-Atom-Stöße die Rückstoßionen den Impuls der Elektronen kompensieren.
Während den ersten Mikrosekunden nach dem Urknall glaubt man, dass unser Universum aus einer heißen, dichten und stark wechselwirkenden Materie bestanden haben soll, welche man das Quark-Gluonen-Plasma (QGP) nennt.
In diesem Medium sind die elementaren Bausteine der Materie, die Quarks und die Gluonen, nicht mehr in Hadronen gebunden, sondern können sich stattdessen wie quasi-freie Teilchen verhalten.
Für die ALICE Kollaboration an CERN's Large Hadron Collider (LHC) ist die Untersuchung dieses Mediums eines der Hauptziele. Um dieses Medium im Labor zu erzeugen, werden Protonen und Nukleonen auf nahezu Lichtgeschwindigkeit beschleunigt und anschließend zur Kollision gebracht. Dabei werden Schwerpunktsenergien von bis zu 13 TeV bei Proton-Proton (pp) Kollisionen und bis zu 5.02 TeV bei Blei-Blei (Pb--Pb) Kollisionen erreicht.
Bei solchen hochenergetischen Kollisionen werden die kritischen Werte der Energiedichte und Temperatur von jeweils ungefähr 1 GeV/c und undgefähr 155 MeV überschritten, welche mithilfe von "lattice QCD" bestimmt wurden. Sie bieten daher die perfekten Voraussetzungen für einen Phasenübergang von normaler Materie zu einem QGP.
Die Entwicklung eines solchen Mediums, beginnend bei der eigentlichen Kollision, gefolgt von der Ausbildung des Plasmas und der letztendlichen Hadronisierung, kann jedoch nicht direkt untersucht werden, da das Plasma eine extrem kurze Lebensdauer hat.
Die Studien die das QGP untersuchen möchten, müssen sich deshalb auf Teilchenmessungen und deren Veränderung aufgrund von Einflüssen durch das Medium beschränken.
Es ist noch nicht definitiv geklärt, ob sich ein QGP nur in Kollisionen schwerer Ionen bildet, oder ob dies auch in kleineren Kollisionssystemen wie Proton-Proton oder Proton-Blei der Fall ist.
Damit in dieser Thesis Einschränkungen bezüglich einer möglichen Erzeugung eines mini-GQP in kleinen Kollisionssystemen gemacht werden kann, wird der Fokus auf Messungen von neutralen Pionen und Eta Mesonen mit dem ALICE Detektor am CERN LHC gesetzt. Hierfür wird in einem Referenzsystem von Proton-Proton Kollisionen bei sqrt(s)=8 TeV und in einem Proton-Blei (p--Pb) System bei sqrt(sNN)=8.16 TeV, welches eine nukleare Modifikation erfährt, gemessen und die Ergebnisse verglichen.
Da in Proton-Proton Kollisionen die Bildung eines QGP, aufgrund zu geringer Energiedichte, nicht erwartet wird, dient eine Messung in diesem System als Messbasis, um Effekte der Kollision selbst von Effekten nach der Kollision zu separieren, welche die Teilchenproduktion beeinflussen.
Teilchen können zusätzlich zu dem QGP auch mit kalter Kernmaterie interagieren, was sich in asymmetrischen Proton-Blei Kollisionen testen lässt. In diesem Kollisionssystem wird größtenfalls ein vergleichsweise kleines QGP gebildet, wohingegen das Blei Ion selbst als kalte Kernmaterie agieren kann.
Zusätzlich zu den Mesonenmessungen wird in dieser Thesis auch die Erzeugung von direkten Photonen bei niedrigen Transversalimpulsen (pT) in multiplizitätsabhängigen p--Pb Kollisionen bei einer Schwerpunktsenergie von sNN=5.02 TeV gemessen, welche als direkte Probe, sowie als charakteristisches Signal des QGP gilt.
Die neutralen Pionen, welche in dieser Thesis gemessen werden, kann man als einen Überlagerungszustand der zwei leichtesten Quarksorten, dem "up" (u) und dem "down" (d) Quark, sowie deren entsprechenden Anti-Teilchen verstehen.
Das eta meson hingegen hat einen zusätzlichen Anteil des "strange" Quarks und eine resultierende höhere Masse.
Quarks sind Teil des Standardmodells der Teilchenphysik, welches die Elementarteilchen und die zwischen ihnen wirkenden Elementarkräfte, ausgeübt durch Bosonen, beschreibt.
Das Modell umfasst insgesamt sechs Quarks, welche sich durch ihre Masse und Ladung unterscheiden und als Grundbestandteil von gebundenen Zuständen, sogenannten Hadronen, fungieren.
Die "up" und "down" Quarks gelten hierbei als die leichtesten Quarks und kommen daher am häufigsten in der Natur vor. Das bekannteste Beipiel stellen hier die allgemein bekannten Protonen (uud) und Neutronen (udd) dar, welche die Grundkomponenten von Nukleonen sind.
Die restlichen Quarks tragen eine deutlich höhere Masse und haben daher eine große Tendenz, sich in leichtere Quarks umzuwandeln, wodurch ihre Lebensdauer sehr gering ist. Die "top" und "bottom" Quarks, welche die Schwersten sind, können daher nicht in gewöhnlicher Materie gefunden werden.
Sie können jedoch experimentell durch hoch energetische Teilchenkollisionen erzeugt werden und indirekt über ihre Zerfallsprodukte nachgewiesen werden.
Quarks tragen eine elektrische Ladung von entweder 1/3 oder 2/3, sowie eine Farbladung, wobei Letztere verantwortlich für ihre Bindung in Hadronen ist.
Hadronen bestehen entweder aus drei Quarks, dann werden sie Baryonen genannt, oder aus einem Quark-Antiquark Paar, welches Meson genannt wird.
Diese gebundenen Zustände erfüllen eine insgesamt neutrale Farbladung, sowie eine vollzählige elektrische Ladung.
Des Weiteren gibt es auch exotische Penta-Quark Zustände, welche aus vier Quarks und einem Antiquark bestehen und bereits experimentell nachgewiesen wurden.
Aufgrund der starken Wechselwirkung, welche durch Gluonen vermittelt wird, können Quarks nicht einzeln beobachtet werden.
...
Direct photon emission from heavy-ion collisions has been calculated and compared to available experimental data. Three different models have been combined to extract direct photons from different environments in a heavy-ion collision: Thermal photons from partonic and hadronic matter have been extracted from relativistic, non-viscous 3+1-dimensional hydrodynamic calculations. Thermal and non-thermal photons from hadronic interactions have been calculated from relativistic transport theory. The impact of different physics assumptions about the thermalized matter has been studied. In pure transport calculations, a viscous hadron gas is present. This is juxtaposed with ideal gases of hadrons with vacuum properties, hadrons which undergo a chiral and deconfinement phase transition and with a system that has a strong first-order phase transition to a deconfined ideal gas of quarks and gluons in the hybrid model calculations with the various Equations of State. The models used for the determination of photons from both hydrodynamic and transport calculations have been elucidated and their numerical properties tested. The origin of direct photons, itemised by emission stage, emission time, channel and baryon number density, has been investigated for various systems, as have the transverse momentum spectra and elliptic flow patterns of direct photons. The differences of photon emission rates from a thermalized transport box and the hadronic photon emission rates that are used in hydrodynamic calculations are found to be very similar, as are the spectra from calculations of heavy-ion collisions with transport model and hybrid model with hadronic Equation of State. Taking into account the full (vacuum) spectral function of the rho-meson decreases the direct photon emission by approximately 10% at low photon transverse momentum. The numerical investigations show that the parameter with the largest impact on the direct photon spectra is the time at which the hydrodynamic description is started. Its variation shows deviations of one to two orders of magnitude. In the regime that can be considered physical, however, the variation is less than a factor of 3. Other parameters change the direct photon yield by up to approximately 20%. In all systems that have been considered -- heavy-ion collisions at E_lab = 35 AGeV and 158 AGeV, (s_NN)**1/2 = 62.4 GeV, 130 GeV and 200 GeV -- thermal emission from a system with partonic degrees of freedom is greatly enhanced over that from hadronic systems, while the difference between the direct photon yields from a viscous and a non-viscous hadronic system (transport vs. hydrodynamics) is found to be very small. Predictions for direct photon emission in central U+U-collisions at 35 AGeV have been made. Since non-soft photon sources are very much suppressed at this energy, experimental results should very easily be able to distinguish between a medium that is entirely hadronic and a system that undergoes a phase transition from partonic to hadronic matter. In the case of lead-lead collisions at 158 AGeV, the situation is not so clear. In central collisions, the complete direct photon spectra including prompt photons seem to favour hadronic emission sources, while the partonic calculations only slightly overpredict the data. In peripheral collisions at the same energy, the hadronic contribution is more than one order of magnitude smaller than the prompt photon contribution, which fits the available experimental data. A similar picture presents itself at higher energies. At RHIC energies, however, the difference between transport calculations and hadronic hybrid model calculations is largest. Hybrid model calculations with partonic degrees of freedom can describe the experimental results in gold-gold collisions at 200 GeV. The elliptic flow component of direct photon emission is found to be consistently positive at small transverse momenta. This means that the initial photon emission from a non-flowing medium does not completely overshine the emission patterns from later stages. High-pt photons dominantly come from the beginning of a heavy-ion collision and therefore do not carry the directed information of an evolving medium.
Binary neutron star mergers represent unique observational phenomena because all four fundamental interactions play an important role at various stages of their evolution by leaving imprints in astronomical observables. This makes their accurate numerical modeling a challenging multiphysics problem that promises to increase our understanding of the high-energy astrophysics at play, thereby providing constraints for the underlying fundamental theories such as the gravitational interaction or the strong interaction of dense matter. For example, the first and so far only multi-messenger observation of the binary neutron star merger GW170817 resulted in numerous bounds on the parameters of isolated non-rotating neutron stars, e.g., their maximum mass or their distribution in radii, which can be directly used to constrain the equation of state of cold nuclear matter. While many of these results stem from the observation of the inspiral gravitational-wave signal, the postmerger phase of binary neutron star mergers encodes even more details about the extreme physics of hot and dense neutron star matter. In this Thesis we focus on the exploration of dissipative and shearing effects in binary neutron star mergers in order to identify novel approaches to constrain hot and dense neutron star matter.
The first effect is the well-motivated dissipation of energy due to the bulk viscosity which arises from violations of weak chemical equilibrium. We start by exploring the impact of bulk viscosity on black-hole accretion. This simplified problem gives us the opportunity to develop a test case for future codes taking into account the effects of dissipation in a fully general-relativistic setup and build intuition in the physics of relativistic dissipation. Next, we move on to isolated neutron stars and binary neutron star mergers by developing a robust implementation of bulk-viscous dissipation for numerical relativity simulations. We test our implementation by calculating the damping of eigenmodes of isolated neutron stars and the violent migration scenario. Finally, we present the first results on the impact of bulk viscosity on binary neutron star mergers. We identify a number of ways how bulk viscosity impacts the postmerger phase, out of which the suppression of gravitational-wave emission and dynamical mass ejection are the most notable ones.
In the last part of this Thesis we investigate how the shearing dynamics at the beginning of the merger affects the amplification of different initial magnetic-field topologies. We explore the hypothesis that magnetic fields which are located only in a small region near the stellar surface prior to merger lead to a weaker magnetic-field amplification. We show first evidence which confirms this hypothesis and discuss possible implications for constraining the physics of superconduction in cold neutron stars.
The aim of this thesis is to provide a complete and consistent derivation of second-order dissipative relativistic spin hydrodynamics from quantum field theory. We will proceed in two main steps. The first one is the formulation of spin kinetic theory from quantum field theory using the Wigner-function formalism and performing an expansion in powers of the Planck constant. The essential ingredient here is the nonlocal collision term. We will find that the nonlocality of the collision term arises at first order in the Planck constant and is responsible for the spin alignment with vorticity, as it allows for conversion between spin and orbital angular momentum.
In the second step, this kinetic theory is used as the starting point to derive hydrodynamics including spin degrees of freedom. The so-called canonical form of the conserved currents follows from Noether’s theorem.
Applying an HW pseudo-gauge transformation, we obtain a spin tensor and energy-momentum tensor with obvious physical interpretation. Promoting all components of the HW tensors to be dynamical, we derive
second-order dissipative spin hydrodynamics. The additional equations of motion for the dissipative currents are obtained from kinetic theory generalizing the method of moments to include spin degrees of freedom.
Das Spektrum der Einfachionisation von Helium unterhalb der Doppelionisationsschwelle bei 79 eV ist reich an komplexen Strukturen. Eine Vielzahl von Resonanzen tritt dort auf. Diese Resonanzen sind unmittelbar verbunden mit doppelt angeregten Zuständen von Helium. Unterhalb einer Photonenenergie von ca. 77 eV liegen diese Resonanzen geordnet vor, und sie können dort mit Hilfe weniger Quantenzahlen klassifiziert werden. Das trifft aber nicht auf den Bereich dicht unterhalb der Doppelionisationsschwelle zu, d.h. zwischen ca. 78,2 eV und 79 eV. Hier verlieren die bis dahin verwendeten Quantenzahlen ihre Gültigkeit. Dieses Gebiet ist sowohl theoretisch als auch experimentell nahezu unerforscht. Traditionelle experimentelle Methoden stoßen hier auf Hindernisse, die auch in den kommenden Jahren höchstwahrscheinlich nicht überwunden werden können. Das größte Problem hierbei sind die sehr geringen Reaktionsraten. Aus diesem Grund wurde im Rahmen dieser Arbeit ein neuer Weg gewählt, der diese Probleme weitgehend hinter sich läßt und Untersuchungen in dieser äußerst schwer zugänglichen Region ermöglicht. Die neue Technik weist gegenüber bisherigen Methoden eine um mehrere Größenordnungen gesteigerte Nachweiseffizienz auf, wodurch Messungen in diesem Energiebereich innerhalb eines vernünftigen Zeitrahmens praktisch erst ermöglicht werden. Erreicht wird dies durch ein Spektrometer, das zu allen Raumrichtungen hin sensitiv ist und die Impulse und Flugrichtungen der emittierten Elektronen individuell für jede einzelne Reaktion nachweisen kann. Die Elektronen werden zusammen mit dem jeweiligen He+-Ion in Koinzidenz nachgewiesen, wodurch eine sehr effiziente Unterdrückung von Untergrundereignissen realisiert wird. Die vorgestellte Meßmethode basiert auf der sogenannten Coltrims-Technik, die seit einigen Jahren im Bereich der Atom- und Molekülphysik äußerst erfolgreich eingesetzt wird. Ihre Anwendung auf niederenergetische Elektronen mit kinetischen Energien im Bereich zwischen 0 eV und 0,5 eV war bisher jedoch nur sehr eingeschränkt möglich und mit großen Unsicherheiten verbunden, da in diesem Fall die Einflüsse verschiedener Störquellen wie beispielsweise das Erdmagnetfeld berücksichtigt werden müssen. Diese Probleme konnten gelöst werden, so daß nun auch winkelaufgelöste Messungen an Elektronen mit weniger als 100 meV kinetischer Energie möglich sind. Die Apparatur wurde im Rahmen einer Messung am Berliner Synchrotron BESSY II erfolgreich eingesetzt. Untersucht wurden die partiellen Wirkungsquerschnitte sN(E) der verschiedenen Ausgangskanäle der Reaktion g(E) + He -> He** -> e- + He+(N), wobei E die Photonenenergie und N die Hauptquantenzahl des erzeugten Heliumions ist. Zusätzlich wurde zu jedem dieser Reaktionskanäle die Winkelverteilung bN(E) der emittierten Elektronen bestimmt. Ziel der Messung war es, zunächst einen Bereich des Energiespektrums abzudecken, für den theoretische Vorhersagen existieren. Im weiteren Verlauf der Messung wurde dieser Bereich ausgedehnt bis hin zur Doppelionisationsschwelle. Die Ergebnisse werden verschiedenen theoretischen Vorhersagen gegenübergestellt und diskutiert. Die aufgenommenen Daten umfassen auch Bereiche des Energiespektrums, für die noch keine theoretischen Ergebnisse vorliegen (78,3 eV<E<78,9 eV). Die hier beobachteten Verhaltensweisen insbesondere der Winkelverteilungen der emittierten Elektronen werden mit veröffentlichten Daten verglichen, die bei einer Photonenenergie von E=80,1 eV aufgenommen wurden, d.h. dicht oberhalb der Doppelionisationsschwelle. Die beobachteten Parallelen können innerhalb eines klassischen Modells interpretiert werden.
The theoretical and experimental investigation of exotic hadrons like tetraquarks is an important branch of modern elementary particle physics. In this thesis I investigate different four-quark systems using lattice QCD and search for evidence of stable tetraquark states or resonances.
Lattice QCD as a non-perturbative approach to QCD allows an accurate and reliable determination of the masses of strongly bound hadrons.
However, most tetraquarks appear as weakly bound states or resonances, which makes a theoretical investigation using lattice QCD difficult due to the finite spatial volume. A rigorous treatment of such systems is feasible using the so-called Lüscher method. This allows to calculate the scattering amplitude based on the finite-volume energy spectrum determined in a lattice QCD calculation. Similarly to the analysis of experimental data, this scattering amplitude can be used to determine the binding energies of bound states or the masses and decay widths of resonances in the infinite volume.
In my work I calculate the low-energy energy spectra of different four-quark systems and use - if necessary - the Lüscher method to determine the masses of potential tetraquark states.
I focus on systems consisting of two heavy antiquarks and two light quarks, where at least one of the heavy antiquarks is a bottom quark.
Even though such tetraquarks have not yet been experimentally detected, they are considered promising candidates for particles that are stable with respect to the strong interaction.
A decisive step for successfully calculating low-lying energy levels for such four-quark systems is a carefully chosen set of creation operators, which represent the physical states most accurately. In addition to operators that generate a local structure where all four quarks are located at the same space-time point, I also use so-called scattering operators that resemble two spatially separated mesons. These scattering operators turned out to be relevant for successfully determining the lowest energy levels and are therefore essential, especially if a Lüscher analysis is carried out.
In my work, I considered two different lattice setups to study the four-quark systems $\bar{b}\bar{b}ud$ with $I(J^P)=0(1^+) $, $\bar{b}\bar{b}us$ with $J^P=1^+ $ and $\bar{b}\bar{c}ud$ with $I(J^P)=0(0^+) $ and $I(J^P)=0(1^+) $ and to predict potential tetraquark states. In both setups, I considered scattering operators. While in the first setup I used them only as annihilation operators, in the second setup they were included both as creation and annihilation operators. Additionally, in the second lattice setup, I performed a simplified investigation of the $\bar{b}\bar{b}ud$ system with $I(J^P)=0(1^-) $, which is a potential candidate for a tetraquark resonance. The results of the investigation of the mentioned four-quark systems can be summarized as follows:
For the $ \bar{b}\bar{b}ud $ four-quark system with $ I(J^P)=0(1^+) $ I found a deeply bound ground state slightly more than $ 100\,\textrm{MeV} $ below the lowest meson-meson threshold. The existence of a corresponding $\bar{b}\bar{b}ud$ tetraquark in the infinite volume was confirmed using a Lüscher analysis and possible systematic errors due to the use of lattice QCD were taken into account.
Similar results were obtained for the $ \bar{b}\bar{b}us $ four-quark system with $ J^P=1^+ $. Again, I found a ground state well below the lowest meson-meson threshold, but slightly weaker bound than for the $ \bar{b}\bar{b}ud $ system. Effects due to the finite volume turned out to be negligible for this system, as already predicted for the $ \bar{b}\bar{b}ud $ system. \item For the $ \bar{b}\bar{c}ud $ four-quark systems with $ (J^P)=0(0^+) $ and $ (J^P)=0(1^+) $ I was able to rule out the existence of a deeply bound tetraquark states based on the energy spectrum in the finite volume. However, by means of a scattering analysis using the Lüscher method, I found evidence a broad resonance for both channels.
In the case of the $ \bar{b}\bar{b}ud $ four-quark system with $ I(J^P)=0(1^-) $, I could neither confirm the existence of a resonance, nor rule out its existence with certainty.
In particular, my investigations showed that the results of the two different lattice simulations are consistent. The theoretical prediction of the bound tetraquark states $\bar{b}\bar{b}ud$ and $\bar{b}\bar{b}us$ as well as the tetraquark resonances in the $\bar{b}\bar{c}ud$ system in this work represent an important contribution to the future experimental search for exotic hadrons and can support the discovery of previously unobserved particles.
Die vorliegende Dissertation untersucht die Nichtgleichgewichtsdynamik von relativistischen Schwerionenkollisionen ausgehend von der anfänglichen Produktion von Teilchen durch den Zerfall von Strings, der Bildung eines Quark-Gluon-Plasmas (QGP), dessen kinetische und chemische Äquilibrierung als Funktion der Zeit sowie seine Transporteigenschaften im Gleichgewicht bei endlicher Temperatur und endlichem chemischen Potential. Ein Verständnis der frühen Phase der Schwerionenkollisionen ist insbesondere von großen Interesse, da letztere eine Verbindung zwischen den ersten Nukleon-Nukleon Kollisionen und der Quark-Gluon-Plasma Phase herstellen, die zu einem späteren Zeitpunkt ein gewisses Maß an Thermalisierung zeigt. Allerdings können nur Nichtgleichgewichts-Theorien eine Verbindung zwischen dem anfänglichen QGP und seiner - zumindest partiellen - Thermalisierung herstellen. Um die Dynamik eines stark wechselwirkenden Mediums wie des Quark-Gluon-Plasmas zu beschreiben, reichen übliche Transportgleichungen (basierend auf der Boltzmann-Gleichung) nicht aus und es müssen komplexere Theorien, die auch für stark korrelierte Medien geeignet sind, angewendet werden. Hier kommen hydrodynamische Simulationen oder Transportrechnungen - basierend auf verallgemeinerten Transportgleichungen - zum Einsatz. Solche verallgemeinerte Transportgleichungen, wie die Kadanoff-Baym-Gleichungen, ergeben sich aus der quantenmechanischen Nichtgleichgewichts-Vielteilchentheorie, in der Green’s- Funktionen in Minkowski Raum-Zeit die interessierenden Größen sind, um die Dynamik des betrachteten Mediums zu beschreiben. Mit geeigneten Näherungen kann man so kinetische Transportgleichungen erhalten, die eine einheitliche Behandlung von stabilen und instabilen Teilchen auch außerhalb des Gleichgewichts ermöglichen. Diese Bestandteile bilden die Basis des Transportmodells Parton-Hadron-String Dynamics (PHSD), welches daher ein geeignetes ’Instrument’ ist um die verschiedenen Phasen einer Schwerionenkollision zu analysieren, egal ob die verschiedenen Formen der Materie im Gleichgewicht sind oder nicht.
In dieser Arbeit wird zunächst die Quantenchromodynamik (QCD) vorgestellt und erklärt, wie diese Theorie im Laufe der Jahre entwickelt wurde um ein wichtiger Bestandteil des Standardmodells der Teilchenphysik zu werden. Wir werden weiterhin die verbleibenden Herausforderungen in unserem Verständnis der QCD vorstellen, die sich primär auf das Phasendiagramm der stark wechselwirkenden Materie konzentrieren.
Im zweiten Kapitel untersuchen wir die Nichtgleichgewichts-Feldtheorie und die damit verbundenen Techniken - wie die Keldysh-Kontur - zur Beschreibung der Green’schen Funktionen als wesentlichen Freiheitsgrade. Wir leiten die Evolutionsgleichung für die Green’schen Funktionen her, d. h. die Kadanoff Baym-Gleichungen am Beispiel einer skalaren Feldtheorie.
Im nächsten Kapitel wird das Transportmodell Parton-Hadron-String Dynamics (PHSD), welches die Anwendung der verallgemeinerten Transportgleichungen zur Beschreibung relativistischer Schwerionenkollisionen darstellt, vorgestellt.
Wir beginnen im Kapitel 4 mit der Untersuchung der Nichtgleichgewichtseigenschaften des Quark-Gluon-Plasmas, welches bei relativistischen Schwerionenkollisionen erzeugt wird. Zu diesem Zweck vergleichen wir die Quark-Gluon-Plasmaentwicklung aus dem PHSD mit einem viskosen hydrodynamischen Modell, bei dem ein lokales kinetisches und chemisches Gleichgewicht angenommen wird.
Im Kapitel 5 konzentrieren wir uns auf das frühe Vorgleichgewichtsstadium ultra-relativistischer Schwerionenkollisionen und insbesondere auf die Freiheitsgrade der QGP-Phase in diesem Stadium. Wir untersuchen die Auswirkungen eines QGP, welches anfänglich entweder aus einem System aus massiven Gluonen (Szenario I) oder alternativ aus Quarks und Antiquarks (Szenario II) besteht. Das nächste Kapitel wird ebenfalls die Produktion von Teilchen im Frühstadium von Schwerionenkollisionen behandeln, jedoch bei niedrigeren Kollisionsenergien. Hier wird eine mikroskopische Beschreibung des K+/pi+-Verhältnisses im Vordergrund stehen, d. h. die Erklärung des Maximums in diesem Verhältnis bei etwa 30 A GeV ("Horn") in zentralen Au+Au (oder Pb+Pb) Kollisionen. Insbesonders werden wir die Modifikation des String-Fragmentierungsprozesses (über den Schwinger-Mechanismus) in einer Umgebung mit hoher hadronischer Dichte aufgrund der teilweisen Wiederherstellung der chiralen Symmetrie untersuchen.
In Kapitel 7 erweitern wir das Parton-Hadron-String Dynamics (PHSD)-Transportmodell im partonischen Sektor, indem wir explizit die totalen und differentiellen partonischen Streuungsquerschnitte als Funktion der Temperatur T und des baryochemischen Potentials μB berechnen auf der Basis der effektiven Propagatoren und Kopplungen des Dynamical QuasiParticle Models (DQPM), welches auch die generelle Zeitentwicklung der partonischen Freiheitsgrade beschreibt. Wir finden nur eine sehr bescheidene Änderung von n/s mit dem baryonchemischen Potential μB in Abhängigkeit von der skalierten Temperatur T/Tc(μB). Dies gilt auch für eine Vielzahl von hadronischen Observablen aus zentralen A+A Kollisionen im Energiebereich von 5 GeV < vsNN < 200 GeV bei der Implementierung der differentiellen Querschnitte in das PHSD-Modell. Da wir in Schwerionen-Observablen nur kleine Spuren einer μB-Abhängigkeit finden - obwohl die effektiven Partonenmassen und Kollisionsbreiten sowie deren Partonenquerschnitte eindeutig von μB abhängen - impliziert dies, dass man eine beträchtliche Partonendichte und ein großes Raum-Zeit-QGP-Volumen zur Untersuchung der Dynamik in der partonischen Phase benötigt. Diese Bedingungen sind nur bei hohen Kollisionsenergien erfüllt, bei denen μB jedoch eher niedrig ist. Wenn andererseits die Kollisionsenergie verringert und somit μB erhöht wird, wird die hadronische Phase dominant und dementsprechend wird es zunehmend schwieriger, Signale aus der Partonendynamik auf der Basis von "Bulk"-Observablen zu extrahieren.
In this thesis, various aspects on the theoretical description of ultracold bosonic atoms in optical lattices are investigated. After giving a brief introduction to the fundamental concepts of BECs, atomic physics, interatomic interactions and experimental procedures in chapter (1), we derive the Bose-Hubbard model from first principles in chapter (2). In this chapter, we also introduce and discuss a technique to efficiently determine Wannier states, which, in contrast to current techniques, can also be extended to inhomogeneous systems. This technique is later extended to higher dimensional, non-separable lattices in chapter (5). The many-body physics and phases of the Bose-Hubbard is shortly presented in chapter (3) in conjunction with Gutzwiller mean-field theory, and the recently devised projection operator approach. We then return to the derivation of an improved microscopic many-body Hamiltonian, which contains higher band contributions in the presence of interactions in chapter (4). We then move on to many-particle theory. To demonstrate the conceptual relations required in the following chapter, we derive Bogoliubov theory in chapter (5.3.4) in three different ways and discuss the connections. Furthermore, this derivation goes beyond the usual version discussed in most textbooks and papers, as it accounts for the fact, that the quasi-particle Hamiltonian is not diagonalizable in the condensate and the eigenvectors have to be completed by additional vectors to form a basis. This leads to a qualitatively different quasi-particle Hamiltonian and more intricate transformation relations as a result. In the following two chapters (7, 8), we derive an extended quasi-particle theory, which goes beyond Bogoliubov theory and is not restricted to weak interactions or a large condensate fraction. This quasi-particle theory naturally contains additional modes, such as the amplitude mode in the strongly interacting condensate. Bragg spectroscopy, a momentum-resolved spectroscopic technique, is introduced and used for the first experimental detection of the amplitude mode at finite quasi-momentum in chapter (9). The closely related lattice modulation spectroscopy is discussed in chapter (10). The results of a time-dependent simulation agree with experimental data, suggesting that also the amplitude mode, and not the sound mode, was probed in these experiments. In chapter (11) the dynamics of strongly interacting bosons far from equilibrium in inhomogeneous potentials is explored. We introduce a procedure that, in conjunction with the collapse and revival of the condensate, can be used to create exotic condensates, while particularly focusing on the case of a quadratic trapping potential. Finally, in chapter (12), we turn towards the physics of disordered systems derive and discuss in detail the stochastic mean-field theory for the disordered Bose-Hubbard model.
In der vorliegenden Arbeit wurden mikroskopische Studien zur Äquilibrierung von partonischer und hadronischer Materie im Rahmen einer Nichtgleichgewichts-Transporttheorie durchgeführt, die sowohl hadronische als partonische Freiheitsgrade enthält und den Übergang zwischen beiden Phasen dynamisch beschreibt. Des Weiteren wurden die thermischen Eigenschaften des Gleichgewichtszustandes der stark wechselwirkenden Materie untersucht, insbesondere Fluktuationen in der Teilchenzahl wie auch höhere Momente von Observablen und deren Verhältnisse. Besonderes Interesse galt dabei den Transportkoeffizienten wie Scher- und Volumenviskosität sowie der elektrischen Leitfähigkeit.
Die Methode der Nichtgleichgewichts-Green'schen Funktionen - initiiert von Schwinger sowie Kadanoff und Baym - wurde vorgestellt um hochenergetische Kern-Kern Kollisionen zu beschreiben. Weiterhin wurde der Schwinger-Keldysh Formalismus benutzt um im Sinne einer Zweiteilchen-irrediziblen Näherung (2PI) die Dynamik von 'resummierten' Propagatoren und Kopplungen in konsistenter Weise zu beschreiben. Des Weiterhin wurden generalisierte Transportgleichungen auf der Basis der Kadanoff-Baym Gleichungen (in Phasenraumdarstellung) abgeleitet und ein Testteilchenverfahren zur Lösung dieser Gleichungen vorgestellt. Damit wurde der formale Rahmen der Parton-Hadron-String Dynamik (PHSD) abgesteckt.
Das PHSD Transportmodell wurde sodann für die Lösung der expliziten Fragestellungen in dieser Arbeit verwendet. Die 'Eingangsgrößen' des Modells wurden in Kapitel 3 aufgeführt. Weiterhin wurde aufgezeigt, dass das Transportmodell alle Phasen einer relativistischen Schwerionenkollision konsistent beschreibt, d.h. angefangen von den primären harten Stoßprozessen und der Bildung von 'Strings' zur Formierung einer partonischen Phase, den Wechselwirkungen in dieser Phase sowie die
dynamische Beschreibung der Hadronisierung. Weiterhin enthält das Modell zudem die hadronischen Endzustandswechselwirkungen bis zum Ausfrieren der hadronischen Freiheitsgrade bei geringer Dichte. ...
Light scalar mesons can be understood as dynamically generated resonances. They arise as 'companion poles' in the propagators of quark-antiquark seed states when accounting for hadronic loop contributions to the self-energies of the latter. Such a mechanism may explain the overpopulation in the scalar sector - there exist more resonances with total spin J=0 than can be described within a quark model.
Along this line, we study an effective Lagrangian approach where the isovector state a_{0}(1450) couples via both non-derivative and derivative interactions to pseudoscalar mesons. It is demonstrated that the propagator has two poles: a companion pole corresponding to a_{0}(980) and a pole of the seed state a_{0}(1450). The positions of these poles are in quantitative agreement with experimental data. Besides that, we investigate similar models for the isodoublet state K_{0}^{*}(1430) by performing a fit to pion-kaon phase shift data in the I=1/2, J=0 channel. We show that, in order to fit the data accurately, a companion pole for the K_{0}^{*}(800), that is, the light kappa resonance, is required. A large-N_{c} study confirms that both resonances below 1 GeV are predominantly four-quark states, while the heavy states are quarkonia.
In this thesis we have studied the physics of different ultracold Bose-Fermi mixtures in optical lattices, as well as spin 1=2 fermions in a harmonic trap. To study these systems we generalized dynamical mean-field theory for a mixture of fermions and bosons, as well as for an inhomogeneous environment. Generalized dynamical mean-field theory (GDMFT) is a method that describes a mixture of fermions and bosons. This method consists of Gutzwiller mean-field for the bosons, and dynamical mean-field theory for the fermions, which are coupled on-site by the Bose-Fermi density-density interaction and possibly a Feshbach term which converts a pair of up and down fermions into a molecule, i.e. a boson. We derived the self-consistency equations and showed that this method is well-controlled in the limit of high lattice coordination number z. We develop real-space dynamical mean-field theory for studying systems in an inhomogeneous environment, e.g. in a harmonic trap. The crucial difference compared to standard DMFT is that we are taking into account that different sites are not equivalent to each other and thus take into account the inhomogeneity of the system. Different sites are coupled by the real-space Dyson equation. ...