Refine
Year of publication
- 2017 (236) (remove)
Document Type
- Article (140)
- Preprint (52)
- Doctoral Thesis (23)
- Conference Proceeding (8)
- Master's Thesis (7)
- Contribution to a Periodical (3)
- Bachelor Thesis (2)
- Other (1)
Has Fulltext
- yes (236)
Is part of the Bibliography
- no (236) (remove)
Keywords
- QCD phase diagram (3)
- Biophysics and structural biology (2)
- Cryo-electron microscopy (2)
- D-wave (2)
- Gabor lens (2)
- Gabor-Linse (2)
- I-wave (2)
- LHC (2)
- QCD (2)
- Research article (2)
Institute
- Physik (236) (remove)
The pathological skin phenotype caused by hyperglycemia is an important indicator for the progress of diabetes mellitus. An early detection of diabetes assures an early intervention to regulate the carbohydrate metabolism. In this publication a non-invasive detection principle based on the measurement of complex scattering parameters in the millimeter-wave frequency range is presented. The measurement principle provides evidence of the applicability for the identification of different glycemic states in animal models. The method proposed here can be used to predict diabetes status in animal models and is interesting for application on humans in view of safeness of millimeter-wave radiation. Furthermore the complex scattering parameters give important information about the anatomic varieties between the analyzed skin samples of the different mice strains. In contrast to other methods, our approach is less sensitive to skin variations between animals.
The toolbox for imaging molecules is well-equipped today. Some techniques visualize the geometrical structure, others the electron density or electron orbitals. Molecules are many-body systems for which the correlation between the constituents is decisive and the spatial and the momentum distribution of one electron depends on those of the other electrons and the nuclei. Such correlations have escaped direct observation by imaging techniques so far. Here, we implement an imaging scheme which visualizes correlations between electrons by coincident detection of the reaction fragments after high energy photofragmentation. With this technique, we examine the H2 two-electron wave function in which electron–electron correlation beyond the mean-field level is prominent. We visualize the dependence of the wave function on the internuclear distance. High energy photoelectrons are shown to be a powerful tool for molecular imaging. Our study paves the way for future time resolved correlation imaging at FELs and laser based X-ray sources.
Secretins form multimeric channels across the outer membrane of Gram-negative bacteria that mediate the import or export of substrates and/or extrusion of type IV pili. The secretin complex of Thermus thermophilus is an oligomer of the 757-residue PilQ protein, essential for DNA uptake and pilus extrusion. Here, we present the cryo-EM structure of this bifunctional complex at a resolution of ~7 Å using a new reconstruction protocol. Thirteen protomers form a large periplasmic domain of six stacked rings and a secretin domain in the outer membrane. A homology model of the PilQ protein was fitted into the cryo-EM map. A crown-like structure outside the outer membrane capping the secretin was found not to be part of PilQ. Mutations in the secretin domain disrupted the crown and abolished DNA uptake, suggesting a central role of the crown in natural transformation.
Die vorliegende Arbeit hat das Ziel, Plasmen koaxialer Beschleuniger in Hinblick auf die Erzeugung hoher Elektronendichten sowie als intensive UV/VUV-Backlighterquelle zu untersuchen. Hierzu wurde zunächst die Geometrie eines einzelnen Beschleunigers charakterisiert und optimiert, um die bestmöglichen Voraussetzungen für die anschließend durchgeführten Untersuchungen zur Kollision und Kompression der erzeugten Plasmen zu schaffen.
Das Funktionsprinzip des verwendeten Plasmabeschleunigers basiert auf einer Lorentzkraft, die aus dem Stromfluss zwischen zwei koaxial angeordneten Elektroden und dem damit verbundenen Magnetfeld resultiert. Da weder Stromdichte noch Magnetfeld homogen sind, wirkt auch die Lorentzkraft inhomogen auf die Plasmaschicht. Unter Einbeziehung von Simulationen wurde der Abstand zwischen den Elektroden auf 2,5 mm gesetzt, sodass die Ausprägung dieser Inhomogenität möglichst gering gehalten wird. Um ein Pinchen des Plasmas am Ende der Elektroden zu vermeiden haben die Elektroden im Gegensatz zu Plasma Focus Devices die gleiche Länge. Der mit 130 nH niederinduktive elektrische Aufbau ermöglicht die zur Ausbildung einer Plasmaschicht erforderlichen Stromanstiegsraten in der Größenordnung von 10^11 A/s.
Die Messung der Geschwindigkeit der Plasmaschicht erfolgte mit einem Array aus sechs Dioden, die gleichzeitig die Geschwindigkeitsabnahme im Rezipienten dokumentieren. Zusätzlich wurden die Messungen mit Kameraaufnahmen verglichen. Bei einer Elektrodenlänge von 100 mm konnten mit dem verwendeten Heliumgas Schichtgeschwindigkeiten von bis zu (79,49 ± 7,98) km/s erreicht werden. Die Untersuchung von Elektroden mit 200 mm Länge verfolgte das Ziel, durch die größere Beschleunigungszeit höhere Geschwindigkeiten und kinetische Energien der austretenden Plasmaschicht zu erreichen. Es zeigte sich jedoch, dass es hierbei zur Ausbildung einer zweiten Entladung und einer damit verbundenen Abbremsung des Initialplasmas kommt. Die Untersuchungen ergaben, dass die optimale Elektrodenlänge dadurch gegeben ist, dass der Austritt des Plasmas aus dem Beschleuniger zum Zeitpunkt des ersten Stromnulldurchgangs erfolgt. Für die Berechnung der optimalen Elektrodenlänge wurde ein Skalierungsgesetz gefunden, die auf experimentellen Ergebnissen und Simulationen basiert.
Mit spektroskopische Messungen der Stark-Verbreiterung der Hβ-Linie konnte die Elektronendichte des Plasmas zeit- und ortsintegriert bestimmt werden. Die hierbei erzielte Maximaldichte von (6,83 ± 0,83) · 10^15 cm^-3 wurde bei 9 kV und 70 mbar gemessen. Die nach der Boltzmann-Methode zeit- und ortsintegriert bestimmten Elektronentemperaturen bewegt sich bei etwa 1 eV.
Nach ausreichender Charakterisierung des Einzelbeschleunigers wurde das Experiment um einen zweiten, baugleichen Plasmabeschleuniger erweitert, um die planare Kollision zweier Plasmen zu untersuchen. Die maximal gemessene Elektronendichte von n max e = (1,36 ± 0,21) · 10^16 cm^-3 bei 9 kV und 70 mbar stellt im Vergleich zum Einzelplasma eine Steigerung um einen Faktor von 2,48 dar und ist mit einer Temperaturerhöhung einhergehend. Diese Elektronendichteerhöhung lässt sich nicht durch einfaches Durchdringen der Schichten erklären. Vielmehr muss es in der Kollisionszone zu Wechselwirkungsprozesse in Form von Kompression, zur Erzeugung neuer Ladungsträger oder der Kombination aus beidem kommen.
Das Spektrum im UV/VUV-Bereich weist Linien von ab 85 nm auf. Dies stellt eine Verbesserung gegenüber dem Einzelbeschleuniger dar, bei dem die hochenergetischste Spektrallinie erst bei 97 nm gemessen wurde. In der Kollisionskonfiguration mit einem Beschleunigerabstand von 30 mm steigt die integrierte Gesamtintensität des Spektrums bis 300 nm zudem um einen Faktor von etwa 5,2.
Als Alternative zur Plasmakollision wurde die Kompression des Plasmas des Einzelbeschleunigers durch unterschiedliche Trichtergeometrien untersucht. Die untersuchten Trichter der ersten und zweiten Generation unterscheiden sich im Wesentlichen im Durchmesser der kleineren Öffnung. Dieser wurde basierend auf Simulationen von 5 mm auf 0,5 mm reduziert. Die Dichtediagnostik der ersten Trichtergeneration erfolgte hierbei über Hα-Linie, da die Verbreiterung der Hβ-Linie zu stark und daher nicht mehr anwendbar war. Die Auswertung der Halbwertsbreiten der Hα-Linie führt zu Elektronendichten in der Größenordnung von bis zu 1018 cm−3 bei Spannungen von 9 kV. Diese Steigerung um 1,5 bis 2,5 Größenordnungen im Vergleich zum Einzelbeschleuniger ist deutlich höher als das Verhältnis der Flächen des initialen Plasmas bzw. dem Ende des Trichters von etwa acht.
Der Trichter mit verringerter Öffnung wurde bei 5 kV und 5 mbar vermessen, um die mechanische Belastung durch den hohen Druck gering zu halten. Die Bestimmung der Elektronendichte erfolgte durch die Verbreiterung der Kupferlinie bei 479,4 nm nach den quadratischen Stark-Effekt. Trotz der im Vergleich zur ersten Trichtergeneration reduzierten Entladungsenergie und verringertem Druck sind die gemessenen Elektronendichten ebenfalls bei bis zu 10^18 cm^-3.
Durch die Kompression des Plasmas weist das Spektrum im UV/VUV-Bereich bereits Linien ab Wellenlängen etwa 53 nm auf, wobei es unter Berücksichtigung der Transmissionsgrenze von Helium bei 50 nm denkbar ist, dass das Plasma noch niedrigere Wellenlängen emittiert.
Aufgrund der gesammelten Ergebnisse lässt sich festhalten, dass sich die Elektronendichte sowohl durch die Kollision zweier Plasmen als auch durch die Kompression in Trichtergeometrien steigern lässt. Der Verdichtungseffekt der Trichterkompression ist hierbei um ein vielfaches höher, als bei der Plasmakollision. Dies spiegelt sich auch im UV/VUV-Spektrum wider. Beide Versuchsanordnungen eignen sich als Linienstrahler, allerdings weist das Spektrum der Trichterkompression Linien deutlich höherer Anregungszustände auf.
Die Arbeit beschäftigt sich mit der Herstellung sowie der strukturellen und magnetischen Charakterisierung von zwei Materialklassen von kupferbasierten zweidimensionalen Quanten-Spin-Systemen: Quadratische Gitter von Dimeren sowie geometrisch frustrierte Kagomé Gitter. In beiden Systemen werden Substitutionen vorgestellt die zu verbesserten Eigenschaften führen.
Ion channel gating is essential for cellular homeostasis and is tightly controlled. In some eukaryotic and most bacterial ligand-gated K+ channels, RCK domains regulate ion fluxes. Until now, a single regulatory mechanism has been proposed for all RCK-regulated channels, involving signal transduction from the RCK domain to the gating area. Here, we present an inactive ADP-bound structure of KtrAB from Vibrio alginolyticus, determined by cryo-electron microscopy, which, combined with EPR spectroscopy and molecular dynamics simulations, uncovers a novel regulatory mechanism for ligand-induced action at a distance. Exchange of activating ATP to inactivating ADP triggers short helical segments in the K+-translocating KtrB dimer to organize into two long helices that penetrate deeply into the regulatory RCK domains, thus connecting nucleotide-binding sites and ion gates. As KtrAB and its homolog TrkAH have been implicated as bacterial pathogenicity factors, the discovery of this functionally relevant inactive conformation may advance structure-guided drug development.
Im Rahmen dieser Arbeit wird darauf eingegangen, welche Anpassungen erforderlich sind, um Protonendichten vergleichbar zu bereits erzeugten Elektronendichten in Gabor-Linsen zu erhalten. Zur Vorbereitung zukünftiger Experimente werden vergleichende Simulationen zum Einschluss der Ladungsträgerdichten durchgeführt und die Strahldynamik bei der Wechselwirkung eines positiven Ionenstrahls mit einem in einer Gabor-Linse eingeschlossenen Protonenplasma untersucht. Die Ergebnisse der Strahldynamiksimulationen werden mit theoretischen Berechnungen vertieft, in dem die Brennweite einer Gabor-Linse, die mit einer beliebigen Teilchensorte gefüllt ist, berechnet und die Drift-Masse eingeführt wird.
Eine weitere analytische Betrachtung ist die Erweiterung der Teilchendynamik in der Gabor-Linse auf beliebige Anfangsbedingungen, in dem die dazugehörige Differentialgleichung entkoppelt und ganz allgemein gelöst wird. Die daraus berechneten Trajektorien der Teilchen führen zu einem besseren Verständnis, das weitere Anwendungen erschließen könnte.
Recently the Universal Linear Accelerator (UNILAC) serves as a powerful high duty factor (25%) heavy ion beam accelerator for the ambitious experiment program at GSI. Beam time availability for SHE (Super Heavy Element)-research will be decreased due to the limitation of the UNILAC providing Uranium beams with an extremely high peak current for FAIR simultaneously. To keep the GSI-SHE program competitive on a high level and even beyond, a standalone superconducting continuous wave (100% duty factor) LINAC in combination with the upgraded GSI High Charge State injector is envisaged. In preparation for this, the first LINAC section (financed by HIM and GSI) will be tested with beam in 2017, demonstrating the future experimental capabilities. Further on the construction of an extended cryo module comprising two shorter Crossbar-H cavities is foreseen to test until end of 2017. As a final R&D step towards an entire LINAC three advanced cryo modules, each comprising two CH cavities, should be built until 2019, serving for first user experiments at the Coulomb barrier.
The study of lattice gauge theories with Monte Carlo simulations is hindered by the infamous sign problem that appears under certain circumstances, in particular at non-zero chemical potential. So far, there is no universal method to overcome this problem. However, recent years brought a new class of non-perturbative Hamiltonian techniques named tensor networks, where the sign problem is absent. In previous work, we have demonstrated that this approach, in particular matrix product states in 1+1 dimensions, can be used to perform precise calculations in a lattice gauge theory, the massless and massive Schwinger model. We have computed the mass spectrum of this theory, its thermal properties and real-time dynamics. In this work, we review these results and we extend our calculations to the case of two flavours and non-zero chemical potential. We are able to reliably reproduce known analytical results for this model, thus demonstrating that tensor networks can tackle the sign problem of a lattice gauge theory at finite density
The detailed biophysical mechanisms through which transcranial magnetic stimulation (TMS) activates cortical circuits are still not fully understood. Here we present a multi-scale computational model to describe and explain the activation of different pyramidal cell types in motor cortex due to TMS. Our model determines precise electric fields based on an individual head model derived from magnetic resonance imaging and calculates how these electric fields activate morphologically detailed models of different neuron types. We predict neural activation patterns for different coil orientations consistent with experimental findings. Beyond this, our model allows us to calculate activation thresholds for individual neurons and precise initiation sites of individual action potentials on the neurons’ complex morphologies. Specifically, our model predicts that cortical layer 3 pyramidal neurons are generally easier to stimulate than layer 5 pyramidal neurons, thereby explaining the lower stimulation thresholds observed for I-waves compared to D-waves. It also shows differences in the regions of activated cortical layer 5 and layer 3 pyramidal cells depending on coil orientation. Finally, it predicts that under standard stimulation conditions, action potentials are mostly generated at the axon initial segment of cortical pyramidal cells, with a much less important activation site being the part of a layer 5 pyramidal cell axon where it crosses the boundary between grey matter and white matter. In conclusion, our computational model offers a detailed account of the mechanisms through which TMS activates different cortical pyramidal cell types, paving the way for more targeted application of TMS based on individual brain morphology in clinical and basic research settings.
Motivated by the necessary replacement of the GSI UNILAC poststripper linac, a compact and efficient linac design based on IH-type cavities has been developed. Using KONUS beam dynamics, it was possible to design a linac consisting of only five cavities that can be operated by the existing UNILAC RF amplifier structure. The transversal focusing scheme is based on magnetic quadrupole triplet lenses. The optimized design provides full transmission and low emittance growth for the design current of 15 emA U28+, accelerating the beam from 1.4 MeV/u to 11.4 MeV/u. Extensive error studies were performed to define tolerances and verify the stability of the design with respect to misalignment and injection parameters. The design provides a compact and cost effective alternative to a new Alvarez linac. With a total length of just 22.8 meters it will leave room for future energy upgrades in the UNILAC tunnel.
Relativistic jets from active galactic nuclei (AGN) often display a non-uniform structure and are, under certain conditions, susceptible to a number of instabilities. An interesting example is the development of non-axisymmetric, Rayleigh-Taylor type instabilities in the case of differentially rotating two-component jets, with the toroidal component of the magnetic field playing a key role in the development or suppression of these instabilities. We have shown that higher magnetization leads to stability against these non-axisymmetric instabilities. Using ray-casting on data from relativistic MHD simulations of two-component jets, we now investigate the effect of these instabilities on the synchrotron emission pattern from the jets. We recover many well known trends from actual observations, e.g., regarding the polarization fraction and the distribution of the position angle of the electric field, in addition to a different emitting region, depending on the stability of the jet.
Autophagy is a physiological process for the recycling and degradation of cellular materials. Forming the autophagosome from the phagophore, a cup-shaped double-membrane vesicle, is a critical step in autophagy. The origin of the cup shape of the phagophore is poorly understood. In yeast, fusion of a small number of Atg9-containing vesicles is considered a key step in autophagosome biogenesis, aided by Atg1 complexes (ULK1 in mammals) localized at the preautophagosomal structure (PAS). In particular, the S-shaped Atg17-Atg31-Atg29 subcomplex of Atg1 is critical for phagophore nucleation at the PAS. To study this process, we simulated membrane remodeling processes in the presence and absence of membrane associated Atg17. We show that at least three vesicles need to fuse to induce the phagophore shape, consistent with experimental observations. However, fusion alone is not sufficient. Interactions with 34-nm long, S-shaped Atg17 complexes are required to overcome a substantial kinetic barrier in the transition to the cup-shaped phagophore. Our finding rationalizes the recruitment of Atg17 complexes to the yeast PAS, and their unusual shape. In control simulations without Atg17, with weakly binding Atg17, or with straight instead of S-shaped Atg17, the membrane shape transition did not occur. We confirm the critical role of Atg17-membrane interactions experimentally by showing that mutations of putative membrane interaction sites result in reduction or loss of autophagic activity in yeast. Fusion of a small number of vesicles followed by Atg17-guided membrane shape-remodeling thus emerges as a viable route to phagophore formation.
The phenomenon of jet quenching provides essential information about the properties of hot and dense matter created in ultra-relativistic heavy-ion collisions. Recent results from experiments at the Large Hadron Collider (LHC) show evidence for an unexpectedly similar suppression of both light and heavy flavor jets. Furthermore, the role of radiative energy loss of heavy quarks is still under active discussion within the theoretical community. By employing the parton cascade Boltzmann Approach to Multi-Parton Scatterings (BAMPS), which numerically solves the 3+1 D Boltzmann equation both for light and heavy flavor partons, we calculate the nuclear modification factor of inclusive and b-tagged reconstructed jets in 0–10% central sLHC=2.76ATeV Pb + Pb collisions. Based on perturbative QCD cross sections we find a suppression of both light and heavy flavor jets. While the inclusive jets are slightly too strong suppressed within Bamps in comparison with data, both elastic + radiative and only elastic interactions lead to a realistic b-tagged jet suppression. To further investigate light and heavy flavor energy loss we predict the R dependence of inclusive and b-tagged jet suppression. Furthermore, we propose the medium modification of b-tagged jet shapes as an observable for discriminating between different heavy quark energy loss scenarios.
In its weak field limit, Scalar-tensor-vector gravity theory introduces a Yukawa-correction to the gravitational potential. Such a correction depends on the two parameters, α which accounts for the modification of the gravitational constant, and μ∗−1 wwhich represents the scale length on which the scalar field propagates. These parameters were found to be universal when the modified gravitational potential was used to fit the galaxy rotation curves and the mass profiles of galaxy clusters, both without Dark Matter. We test the universality of these parameters using the temperature anisotropies due to the thermal Sunyaev–Zeldovich effect. In our model the intra-cluster gas is in hydrostatic equilibrium within the modified gravitational potential well and it is described by a polytropic equation of state. We predict the thermal Sunyaev–Zeldovich temperature anisotropies produced by Coma cluster, and we compare them with those obtained using the Planck 2013 Nominal maps. In our analysis, we find α and the scale length, respectively, to be consistent and to depart from their universal values. Our analysis points out that the assumption of the universality of the Yukawa-correction to the gravitational potential is ruled out at more than 3.5σ at galaxy clusters scale, while demonstrating that such a theory of gravity is capable to fit the cluster profile if the scale dependence of the gravitational potential is restored.
The goal of heavy ion reactions at low beam energies is to explore the QCD phase diagram at high net baryon chemical potential. To relate experimental observations with a first order phase transition or a critical endpoint, dynamical approaches for the theoretical description have to be developed. In this summary of the corresponding plenary talk, the status of the dynamical modeling including the most recent advances is presented. The remaining challenges are highlighted and promising experimental measurements are pointed out.
We present a method that enables the identification and analysis of conformational Markovian transition states from atomistic or coarse-grained molecular dynamics (MD) trajectories. Our algorithm is presented by using both analytical models and examples from MD simulations of the benchmark system helix-forming peptide Ala5, and of larger, biomedically important systems: the 15-lipoxygenase-2 enzyme (15-LOX-2), the epidermal growth factor receptor (EGFR) protein, and the Mga2 fungal transcription factor. The analysis of 15-LOX-2 uses data generated exclusively from biased umbrella sampling simulations carried out at the hybrid ab initio density functional theory (DFT) quantum mechanics/molecular mechanics (QM/MM) level of theory. In all cases, our method automatically identifies the corresponding transition states and metastable conformations in a variationally optimal way, with the input of a set of relevant coordinates, by accurately reproducing the intrinsic slowest relaxation rate of each system. Our approach offers a general yet easy-to-implement analysis method that provides unique insight into the molecular mechanism and the rare but crucial (i.e., rate-limiting) transition states occurring along conformational transition paths in complex dynamical systems such as molecular trajectories.
Walter Greiner: in memoriam
(2017)
Walter Greiner (29 October 1935 - 6 October 2016) was a German theoretical physicist. His scientific research interests include the thematic areas of atomic physics, heavy ion physics, nuclear physics, elementary particle physics (particularly quantum electrodynamics and quantum chromodynamics). He is most known in Germany for his series of books in theoretical physics, but he is also well known around the world. Greiner was born on October 29, 1935, in Neuenbau, Sonnenberg, Germany. He studied physics at the University of Frankfurt (Goethe University in Frankfurt Am Main), receiving in this institution a BSci in physics and a Master’s degree in 1960 with a thesis on plasma-reactors, and a PhD in 1961 at the University of Freiburg under Hans Marshal, with a thesis on the nuclear polarization in μμ-mesic atoms. During the period of 1962 to 1964 he was assistant professor at the University of Maryland, followed by a position as research associate at the University of Freiburg, in 1964. Starting in 1965, he became a full professor at the Institute for Theoretical Physics at Goethe University until 2003. Greiner has been a visiting professor to many universities and laboratories, including Florida State University, the University of Virginia, the University of California, the University of Melbourne, Vanderbilt University, Yale University, Oak Ridge National Laboratory and Los Alamos National Laboratory. In 2003, with Wolf Singer, he was the founding Director of the Frankfurt Institute for Advanced Studies (FIAS), and gave lectures and seminars in elementary particle physics. He died on October 6, 2016 at the age of 80.
Walter Greiner was an excellent teacher, researcher, friend. And he was a great supporter of the series of events known by the acronyms IWARA - International Workshop on Astronomy and Relativistic Astrophysics, STARS - Caribbean Symposium on Cosmology, Gravitation, Nuclear and Astroparticle Physics, and SMFNS - International Symposium on Strong Electromagnetic Fields and Neutron Stars. Walter Greiner left us. But his memory will remain always alive among us who have had the privilege of knowing him and enjoy his wisdom and joy of living.
The KER for electron capture of vibrational cooled HeH+ and H3 + ions at 20 keV from residual gas atoms has been measured in the Frankfurt Low Energy Storage Ring (FLSR). At a vacuum in the order of few 10-11 mbar, this residual gas consists to 99% of H2 molecules. For the identification of the recoil products of this reaction, a recoil spectrometer (with an MCP-detector with position and time sensitive read out) was installed at one of the focus points (IP) in the FLSR. The planned extension of this set up by a gas target to a full COLTRIMS reaction microscope will be discussed.
According to a proposal by 't Hooft, information loss introduced by constraints in certain classical dissipative systems may lead to quantization. This scheme can be realized within the Bateman model of two coupled oscillators, one damped and one accelerated. In this paper we analyze the links of this approach to effective Hamiltonians where the environmental degrees of freedom do not appear explicitly but their effect leads to the same friction force appearing in the Bateman model. In particular, it is shown that by imposing constraints, the Bateman Hamiltonian can be transformed into an effective one expressed in expanding coordinates. This one can be transformed via a canonical transformation into Caldirola and Kanai's effective Hamiltonian that can be linked to the conventional system-plus-reservoir approach, for example, in a form used by Caldeira and Leggett.
In this work we present, for the first time, the non-perturbative renormalization for the unpolarized, helicity and transversity quasi-PDFs, in an RI′ scheme. The proposed prescription addresses simultaneously all aspects of renormalization: logarithmic divergences, finite renormalization as well as the linear divergence which is present in the matrix elements of fermion operators with Wilson lines. Furthermore, for the case of the unpolarized quasi-PDF, we describe how to eliminate the unwanted mixing with the twist-3 scalar operator.
We utilize perturbation theory for the one-loop conversion factor that brings the renormalization functions to the MS-scheme at a scale of 2 GeV. We also explain how to improve the estimates on the renormalization functions by eliminating lattice artifacts. The latter can be computed in one-loop perturbation theory and to all orders in the lattice spacing.
We apply the methodology for the renormalization to an ensemble of twisted mass fermions with Nf = 2 + 1 + 1 dynamical quarks, and a pion mass of around 375 MeV.
Motivated by recent experimental suggestions of charge-order-driven ferroelectricity in organic charge-transfer salts, such as κ-(BEDT-TTF)2Cu[N(CN)2]Cl, we investigate magnetic and charge-ordered phases that emerge in an extended two-orbital Hubbard model on the anisotropic triangular lattice at 3/4 filling. This model takes into account the presence of two organic BEDT-TTF molecules, which form a dimer on each site of the lattice, and includes short-range intramolecular and intermolecular interactions and hoppings. By using variational wave functions and quantum Monte Carlo techniques, we find two polar states with charge disproportionation inside the dimer, hinting to ferroelectricity. These charge-ordered insulating phases are stabilized in the strongly correlated limit and their actual charge pattern is determined by the relative strength of intradimer to interdimer couplings. Our results suggest that ferroelectricity is not driven by magnetism, since these polar phases can be stabilized also without antiferromagnetic order and provide a possible microscopic explanation of the experimental observations. In addition, a conventional dimer-Mott state (with uniform density and antiferromagnetic order) and a nonpolar charge-ordered state (with charge-rich and charge-poor dimers forming a checkerboard pattern) can be stabilized in the strong-coupling regime. Finally, when electron–electron interactions are weak, metallic states appear, with either uniform charge distribution or a peculiar 12-site periodicity that generates honeycomb-like charge order.
Transition path sampling is a powerful tool in the study of rare events. Shooting trial trajectories from configurations along existing transition paths proved particularly efficient in the sampling of reactive trajectories. However, most shooting attempts tend not to result in transition paths, in particular in cases where the transition dynamics has diffusive character. To overcome the resulting efficiency problem, we developed an algorithm for “shooting from the top.” We first define a shooting range through which all paths have to pass and then shoot off trial trajectories only from within this range. For a well chosen shooting range, nearly every shot is successful, resulting in an accepted transition path. To deal with multiple mechanisms, weighted shooting ranges can be used. To cope with the problem of unsuitably placed shooting ranges, we developed an algorithm that iteratively improves the location of the shooting range. The transition path sampling procedure is illustrated for models of diffusive and Langevin dynamics. The method should be particularly useful in cases where the transition paths are long so that only relatively few shots are possible, yet reasonable order parameters are known.
We have developed and characterized the novel PTR3, a proton transfer reaction-time-of-flight mass spectrometer (PTR-TOF) using a new gas inlet and an innovative reaction chamber design. The reaction chamber consists of a tripole operated with rf voltages generating an electric field only in the radial direction. An elevated electrical field is necessary to reduce clustering of primary hydronium (H3O+) and product ions with water molecules present in the sample gas. The axial movement of the ions is achieved by the sample gas flow only. Therefore, the new design allows a 30-fold longer reaction time and a 40-fold increase in pressure compared to standard PTR-TOF-MS. First calibration tests show sensitivities of up to 18000 counts per second/parts per billion and volume (cps/ppbv) at a mass resolution of >8000 m/Δm (fwhm). The new inlet using center-sampling through a critical orifice reduces wall losses of low volatility compounds. Therefore, the new PTR3 instrument is sensitive to VOC typically present in the ppbv range as well as to semivolatile organic compounds (SVOC) and even highly oxidized organic molecules (HOMs) present in the parts per quadrillion per volume (ppqv) range in the atmosphere.
We present a calculation of the global polarization of Λ hyperons in relativistic Au–Au collisions at RHIC Beam Energy Scan range sNN−−−√=7.7−200 GeV with a 3+1-dimensional cascade+viscous hydro model, UrQMD+vHLLE. Within this model, the mean polarization of Λ in the out-of-plane direction is predicted to decrease rapidly with collision energy from a top value of about 2% at the lowest energy examined. We explore the connection between the polarization signal and thermal vorticity and estimate the feed-down contribution to Λ polarization due to the decay of higher mass hyperons.
The topic of this thesis is the investigation of scalar tetraquark candidates from lattice QCD. It is motivated by a previous study originating in the twisted mass collaboration. The initial tetraquark candidate of choice is the $a_0(980)$, an isovector in the nonet of light scalars ($J^P=0^+$). This channel is still poorly understood. It displays an inverted mass hierarchy to what is expected from the conventional quark model and the $a_0(980)$ and $f_0(980)$ feature a surprising mass degeneracy. For this reasons the $a_0(980)$ is a long assumed tetraquark candidate in the literature.
We follow a methodological approach by studying the sensitivity of the scalar spectrum with fully dynamical quarks to a large basis of two-quark and four-quark creation operators. Ultimately, the candidate has to be identified in the direct vicinity of two two-particles states, which is understandably inevitable for a tetraquark candidate. To succeed in this difficult task two-meson creation operators are essential to employ in this channel. By localized four-quark operators we intend to probe the Hamiltonian on eigenstates with a closely bound four-quark structure.
Development of the timing system for the Bunch-to-Bucket transfer between the FAIR accelerators
(2017)
The FAIR project is aiming at providing high-energy beams of ions of all elements from hydrogen to uranium, antiprotons and rare isotopes with high intensities. The existing accelerator facility of GSI and the future FAIR facility employ a variety of circular accelerators like heavy ion synchrotrons (SIS18 and SIS100) and storage rings (ESR, CRYRING, CR and HESR) for the preparation of secondary beams and experiments. Bunches are required to be transferred into rf buckets among GSI and FAIR ring accelerators for different purposes. Without the proper transfer, the beam will be subject to various beam quality deterioration and even to beam losses. Hence, the proper bunch-to-bucket (B2B) transfer between two rings is of great importance for FAIR and is the topic, which has been investigated in this thesis.
These circular accelerators of GSI and FAIR have different ratios in their circumference. For example, the circumference ratio between SIS100 and SIS18 is an integer and between SIS18 and ESR is close to an integer and between CR and HESR is far away from an integer. The ring accelerators are connected via a complicated system of beam transfer lines, targets for the secondary particle production and the high energy separators mentioned above. For FAIR, not only the primary beams are required to be transferred from one ring to another, but also the secondary beams, e.g. the antiproton or rare isotope beams produced by the antiproton (pbar) target, the fragment separator (FRS) or the superconducting fragment separator (Super-FRS). An important topic for this system of accelerators is the proper transfer of beam between the different circular accelerators. Bunches of one ring must be transferred into buckets of another ring within an upper bound time constraint (e.g. 10 ms for most FAIR use cases) and with an acceptable B2B injection center mismatch +-1 degree for most FAIR use cases). Hence, a flexible FAIR B2B transfer system is required to realize the different complex B2B transfers between the FAIR rings in the future. In the focus of the system development and of this thesis is the transfer from SIS18 to SIS100, which can be tested at GSI on the transfer from SIS18 to ESR and from ESR to CRYRING. The system is based on the existing technical basis at GSI, the low-level radio frequency (LLRF) system and the FAIR control system. It coordinates with the Machine Protection System (MPS), which protects SIS100 and subsequent accelerators and experiments from damage caused by high intensity primary beams in case of malfunctioning. Besides, it indicates the beam status and the actual beam injection time for the beam instrumentation and diagnostics.
The conceptual realization of the FAIR B2B transfer system was introduced in this thesis for the first time. It achieves the most FAIR B2B transfers with a tolerable B2B injection center mismatch (e.g. +-1 degree) and within an upper bound time (e.g. 10 ms). It supports two synchronization methods, the phase shift and frequency beating methods. It is flexible to support the beam transfer between two rings with different ratios in their circumference and several B2B transfers running at the same time, e.g. the B2B transfer from SIS18 to SIS100 and at the same time the B2B transfer from ESR to CRYRING. It is capable to transfer beam of different ion species from one machine cycle to another and to transfer beams between two rings via the FRS, the pbar target and the Super-FRS. It allows various complex bucket filling pattern. In addition, it coordinates with the MPS system, which protects the SIS100 and subsequent accelerators or experiments from beam induced damage.
A list of criteria for the preservation of beam qualities during the rf frequency modulation of the phase shift method was analyzed. As an example the beam reaction on three different rf frequency modulation examples were analyzed for SIS18 beams. According to the beam dynamic analysis, there is a maximum value for the rf frequency modulation. The first derivative of the rf frequency modulation must be continuous and small enough and the second derivative must be small enough.
In addition to the analysis from the viewpoint of beam dynamics, two test setups were built. The first test setup was used to characterize the FAIR timing network – white rabbit network for the B2B transfer. In the second test setup, the firmware of the FAIR B2B transfer system was evaluated, which was running on the soft CPU, LatticeMico32, of the Scalable Control Unit - the FAIR standard Front End Controller. Besides, the boundary conditions of the different trigger scenarios of the SIS18 extraction and SIS100 injection kicker magnets were investigated. Finally, the application of the FAIR B2B transfer system for all FAIR use cases was demonstrated.
The dissertation plays a significant important role for the realization of the FAIR B2B transfer system and the further practical application of the system to all FAIR use cases.
Diese Doktorarbeit widmet sich der Untersuchung von Systemen von Quarks und der Wechselwirkung zwischen ihnen mit Hilfe von Lattice QCD. Aus Quarks zusammengesetzte Objekte heißen Hadronen. Ein bestimmter Typ von Hadronen ist das sogenannten Tetraquark. In Teilchendetektoren wie dem LHCb in der Schweiz oder Belle in Japan wurden in jüngerer Zeit Zustände gefunden, die als Kandidaten für Tetraquarks gelten. Diese Arbeit befasst sich mit der Beschreibung und Untersuchung solcher Tetraquark-Zustände. Die Systeme, um die es in dieser Arbeit hauptsächlich geht, enthalten vier Quarks unterschiedlicher Masse. Zwei Quarks wird im Großteil der Arbeit eine unendlich große Masse zugeordnet. Zwei Quarks haben eine endliche Masse. In dieser statisch-leichten Näherung ist es möglich, das Potential der schweren Quarks in Anwesenheit der leichten Quarks zu bestimmen und zu überprüfen, ob es attraktiv genug dazu ist, einen gebundenen Zustand der vier Quarks zu bilden. Dieses Vorgehen ist als Born-Oppenheimer-Approximation bekannt. Die Observable, die berechnet werden muss, ist also das Vier-Quark-Potential.
Im ersten Teil der Arbeit werden verschiedene Vier-Quark-Potentiale aufgeführt und die zugehörigen Quantenzahlen genannt. Jeder der geeigneten Kanäle wird auf seine Fähigkeit untersucht, einen gebundenen Zustand zu bilden. Eine ausführliche systematische und statistische Analyse liefert den eindeutigen Befund, dass Bindung nur für Isospin I = 0 und nichtstatistsche u- und d-Quarks möglich ist. Im Falle von I = 1 oder nichtstatistschen s- und c-Quarks ist kein gebundener Zustand zu erwarten. Schließlich wird für den Fall der u- und d-Quarks eine Extrapolation zu physikalischen Quarkmassen durchgeführt. Die Bindung wird mit abnehmender Quarkmasse stärker. Am physikalischen Punkt wird eine Bindungsenergie von −90(+43−36) MeV festgestellt. Somit wird für Quantenzahlen I(J^P) = 0(1^+) ein gebundener b̄b̄ud-Zustand postuliert. Im zweiten Teil der Arbeit wird die statisch-leichte Näherung aufgehoben. So kann der Spin der schweren Quarks einbezogen werden. Dies führt unter anderem dazu, dass B- und B* -Mesonen unterscheidbar werden. Ein Nachteil dessen, dass vier Quarks endlicher Masse verwendet werden, ist der, dass es nun nicht mehr möglich ist, das Potential der schweren Quarks in Gegenwart der leichten zu bestimmen. Stattdessen wird aus der Korrelationsfunktion des Vier-Quark-Zustands direkt die Masse bestimmt. Zur Beschreibung der schweren Quarks wird der Ansatz der Nichtrelativistischen QCD (NRQCD) gewählt. Es wird der aus dem ersten Teil bekannte gebundene b̄b̄ud-Zustand mit Quantenzahlen I(J^P) = 0(1^+) weiter untersucht. Wir nehmen an, dass die Quantenzahlen durch ein BB*-Molekül realisiert werden. Wir bestimmen mithilfe des generalisierten Eigenwertproblems (GEP) den Grundzustand. Die Masse des Grundzustands ist ein Hinweis auf die Existenz eines gebundenen Zustands. Insgesamt bekräftigt der Befund das im ersten Teil der Arbeit gefundene Resultat, die Vorhersage eines bisher nicht gemessenen Tetraquark-Zustandes, qualitativ. Im dritten Teil der Arbeit geht es um Vier-Quark-Systeme, die ein schweres Quark und ein schweres Antiquark sowie ein leichteres Quark und ein leichteres Antiquark enthalten. Neben einem gebundenen Vier-Quark-Zustand ist u.a. die Bildung eines Bottomonium-und-Pion-Zustands möglich. Dies macht die theoretische Beschreibung dieses Systems ungleich schwieriger als die Beschreibung des im ersten und zweiten Teil der Arbeit untersuchten Systems. Seine experimentelle Untersuchung hingegen ist weniger aufwändig. So wurden bereits Kandidaten für einen solchen Zustand gemessen: Z_b(10610) und Z_b(10650). Zunächst wird ein Szenario beschrieben, in welcher Reihenfolge die zu den verschiedenen Strukturen gehörenden Potentiale vorliegen. So handelt es sich bei dem Grundzustandspotential des Systems um das Potential eines unangeregten Bottomonium-Zustands mit einem Pion in Ruhe. Darüber liegen zahlreiche Bottomonium-Zustände mit Pionen mit endlichem Impuls. Inmitten dieser Potentiale liegt gegebenenfalls das gesuchte Tetraquark-Potential. Ziel ist, einen Weg zu finden, die Bottomonium-und-Pion-Potentiale und das Tetraquark-Potential voneinander zu unterscheiden. Im ersten Schritt wird der Bottomonium-und-Pion-Grundzustand mithilfe des GEP aus dem System entfernt. Der erste angeregte Zustand ist im Anschluss daran weitgehend frei von Einflüssen des Grundzustands. Man findet, dass das Potential des ersten angeregten Zustandes attraktiv ist, sodass die Bildung eines Tetraquark-Zustandes nicht ausgeschlossen ist. Um den ersten angeregten Zustand weiter zu untersuchen, wird ein quantenmechanisches Modell verwendet, das die Volumenabhängigkeit des Überlapp eines Testzustands mit den verschiedenen Strukturen beschreibt. Es damit prinzipiell möglich, unter Zuhilfenahme mehrerer Gittervolumina eine Aussage über die Struktur des ersten angeregten Zustands zu treffen.
Im Rahmen dieser Arbeit wurden neue Ansätze zur Optimierung eines Alvarez Beschleunigers für Schwerionen untersucht. Dabei dient die Alvarez-Sektion des GSI UNILAC als Untersuchungsfeld, da für den Injektionsbetrieb für FAIR eine Erneuerung dieser Sektion erforderlich ist. Dies wird durch einen neuen und optimierten Alvarez-Beschleuniger gewährleistet, wobei Effizienz und Feldstabilität sowie hohe Verfügbarkeit eine wichtige Rolle spielen. Dazu wurden im Rahmen dieser Arbeit wichtige Simulationsrechnungen durchgeführt, ein Messaufbau zum experimentellen Test eines neuartigen Konzepts zur Feld-Stabilisierung ausgelegt, in Betrieb genommen und anhand von Messungen an einem speziell dafür entwickelten Resonatormodell verifiziert.
Ziel dieser Arbeit war es die experimentelle Demonstration des neuen Konzepts zur Feldstabilisierung eines Resonators. Es sollte geprüft werden, ob die zuvor durchgeführten Simulationen die realen Felder hinreichend zuverlässig vorhersagen. Diese experimentelle Prüfung ist angesichts der sehr hohen Baukosten eines realen Resonators von mehreren Millionen Euro unerlässlich. Vor Beginn dieser Arbeit war ein geeigneter Messaufbau, d.h. im Wesentlichen ein dediziertes Resonator-Modell, nicht verfügbar. Es galt ein Modell zu entwickeln, dessen Geometrie seht gut durch Simulationen modelliert werden kann, dessen Aufbau es aber trotzdem gestattet, eben diese Geometrie lokal zu variieren, um den angestrebten Effekt der Feld-Stabilisierung zu erreichen.
Aufgrund von Fertigungs- sowie Justage-Toleranzen gibt es Störungen der Feldhomogenität auf der Strahl- bzw. Resonatorachse. Die Feldhomogenität quantifiziert die Fluktuationen der tatsächlichen Feldstärke bezüglich des Idealwertes. Ein perfekt homogenes Feld weist keine Abweichungen auf. Bei einer lokalen Störung ist die Feldveränderung am Ort der Störung maximal und verringert sich mit dem Abstand von dieser. Es entsteht eine Verkippung des Feldes. Die Feldverkippung ist definiert als die durch die Störung verursachte Feldabweichung normiert auf die ungestörte Feldverteilung sowie auf die damit verbundene Änderung der Modenfrequenz. Letztere wird mit Tauchkolben kompensiert; die Feldhomogenität allerdings kann nicht wieder hergestellt werden. Die Feldhomogenität muss durch eine andere Maßnahme sichergestellt werden. Bei Alvarez-Kavitäten mit einem Tankradius R < 0,4m werden „post-coupler“ eingesetzt. Post-coupler sind dünne zylinderförmige Kupferstangen die seitlich an die Driftröhren herangefahren werden und an die Resonanzmode des Beschleunigers koppeln. Gleichzeitig wird die Sensibilität auf Störungen im Tank verringert, sodass die homogene Feldverteilung auch bei Störungen gut erhalten bleibt. Bei Beschleunigerstrukturen mit größeren Tankradien werden die post-coupler zu lang und erfordern einen zu großen Aufwand in der Konstruktion. In dieser Arbeit wurde eine alternative Methode für die Stabilisierung der Feldverteilung untersucht, welche die Winkelposition der Driftröhrenstützen nutzt.
Der in dieser Arbeit realisierte Resonator erlaubt die freie Einstellung der Winkel der Stützen sowie die exakte Justage der Driftröhren auf der Strahlachse. Es wurde ein Aluminium-Modell im Maßstab 1:3 zum realen Alvarez-Resonator gebaut. Dieser hatte zunächst eine Länge von ∼ 525mm und neun Driftröhren. Das Modell ist mit einem Profil der Geschwindigkeit der zu beschleunigenden Ionen ausgestattet, sodass die Driftröhren sowie die Spaltabstände entlang des Resonators länger werden. Mittels Simulationen wurden diverse Stützenkonfigurationen ausgewählt, die in den Messungen getestet wurden.
Mit dem Modell konnte gezeigt werden, dass bei bestimmten Stützenanordnungen die nächst höheren Moden weiter von der Betriebsmode entfernt werden können. Die besten Ergebnisse lieferte die Stützenkonfiguration mit fünf nach unten und vier nach oben orientierten Stützenpaaren (V-Stützen-Konfiguration 5+4). Hier liegt die nächst höhere Mode in den Messungen um mehr als 160MHz von der Grundfrequenz (326,7MHz) entfernt (Vergleich originale V-Stützen-Konfiguration: nächste Mode liegt 88MHz von der Grundmode entfernt). Wichtig ist die Eigenschaft der Modenseparation vor allem für den realen Einsatz der Kavität, da hier die Moden nur um wenige MHz voneinander entfernt liegen und dies zu Störungen im Betrieb des Resonators bei hoher HF-Leistung führen kann. Bei ungenügender Modenseparation wird die eingekoppelte HF-Leistung vom Resonator reflektiert. Mitunter können die erforderlichen Felder der Betriebsmode nicht erzeugt werden.
Im Falle einer Feldverkippung stimmt die reale Ionengeschwindigkeit entlang des Tanks nicht mehr mit der bei der Auslegung angenommenen überein. Das führt zu einer Verringerung der longitudinalen Strahlqualität bezüglich der erreichbaren Energieschärfe.
Zur systematischen Prüfung der Methode zur Feldstabilisierung wurden definierte Störungen in den Tank eingebaut. Die erste Driftröhre wurde jeweils um 1, 2 und 3mm verlängert. Da die Zahl der Zellen zu gering war für die statistisch signifikante Feldverkippungs-Messung, musste das Modell auf 21 Spalte erweitert werden. Die besten Ergebnisse bzgl. Feld-Stabilisierung lieferte die V-Stützen-Konfiguration 7+7+6. Hier bleibt das Feld trotz Störstelle homogen. Die Feldverkippung kann auf weniger als die Hälfte derjenigen der originalen V-Stützen-Konfiguration reduziert werden. Für den Fall der originalen Stützenkonfiguration erzeugt die oben beschriebene Störung eine Abweichung der Feldhomogenität von ±28%. Mit der in dieser Arbeit optimierten Stützenkonfiguration verändert sich die Feldhomogenität nur um ±9%.
Die Methode zur Feldstabilisierung mit einer optimierten Stützenanordnung ohne den Einsatz von post-couplern konnte am Modell gezeigt werden. Weiterhin wurde eine bessere Effizienz mit Zunahme der Tanklänge verifiziert. Im realen Alvarez-Tank wird die Anzahl der Spalte um einen Faktor 3 größer sein. Damit ergeben sich durch die erhöhte Anzahl zur Verfügung stehenden Stützen zusätzliche Konfigurationen, um eine Feldhomogenität von besser als ±1% zu gewährleisten.
Auf der Basis dieser Untersuchungen ist bei GSI der Bau einer zunächst ca. 2m langen Sektion des neuen Alvarez-DTL mit 11 Driftröhren vorgesehen. Dabei werden Flansche für verschiedene Stützenkonfigurationen integriert. Ziel ist es hierbei die Konstruktion, die Produktion, die Feldabstimmung sowie den Betrieb bei nominalen FAIR-Parametern zu testen. Sind die Tests erfolgreich, kommt diese Sektion bei der ersten Serie für den neuen Beschleuniger zum Einsatz.
We present results on transverse momentum (pT) and rapidity (y) differential production cross sections, mean transverse momentum and mean transverse momentum square of inclusive J/ψ and ψ(2S) at forward rapidity (2.5 < y < 4) as well as ψ(2S)-to-J/ψ cross section ratios. These quantities are measured in pp collisions at center of mass energies s√=5.02 and 13 TeV with the ALICE detector. Both charmonium states are reconstructed in the dimuon decay channel, using the muon spectrometer. A comprehensive comparison to inclusive charmonium cross sections measured at s√=2.76, 7 and 8 TeV is performed. A comparison to non-relativistic quantum chromodynamics and fixed-order next-to-leading logarithm calculations, which describe prompt and non-prompt charmonium production respectively, is also presented. A good description of the data is obtained over the full pT range, provided that both contributions are summed. In particular, it is found that for pT > 15 GeV/c the non-prompt contribution reaches up to 50% of the total charmonium yield.
We present an in-depth study of masses and decays of excited scalar and pseudoscalar q¯q states in the Extended Linear Sigma Model (eLSM). The model also contains ground-state scalar, pseudoscalar, vector and axial-vector mesons. The main objective is to study the consequences of the hypothesis that the f0(1790) resonance, observed a decade ago by the BES Collaboration and recently by LHCb, represents an excited scalar quarkonium. In addition we also analyse the possibility that the new a0(1950) resonance, observed recently by BABAR, may also be an excited scalar state. Both hypotheses receive justification in our approach although there appears to be some tension between the simultaneous interpretation of f0(1790)/a0(1950) and pseudoscalar mesons η(1295), π(1300), η(1440) and K(1460) as excited q¯q states.
The ability to learn sequential behaviors is a fundamental property of our brains. Yet a long stream of studies including recent experiments investigating motor sequence learning in adult human subjects have produced a number of puzzling and seemingly contradictory results. In particular, when subjects have to learn multiple action sequences, learning is sometimes impaired by proactive and retroactive interference effects. In other situations, however, learning is accelerated as reflected in facilitation and transfer effects. At present it is unclear what the underlying neural mechanism are that give rise to these diverse findings. Here we show that a recently developed recurrent neural network model readily reproduces this diverse set of findings. The self-organizing recurrent neural network (SORN) model is a network of recurrently connected threshold units that combines a simplified form of spike-timing dependent plasticity (STDP) with homeostatic plasticity mechanisms ensuring network stability, namely intrinsic plasticity (IP) and synaptic normalization (SN). When trained on sequence learning tasks modeled after recent experiments we find that it reproduces the full range of interference, facilitation, and transfer effects. We show how these effects are rooted in the network’s changing internal representation of the different sequences across learning and how they depend on an interaction of training schedule and task similarity. Furthermore, since learning in the model is based on fundamental neuronal plasticity mechanisms, the model reveals how these plasticity mechanisms are ultimately responsible for the network’s sequence learning abilities. In particular, we find that all three plasticity mechanisms are essential for the network to learn effective internal models of the different training sequences. This ability to form effective internal models is also the basis for the observed interference and facilitation effects. This suggests that STDP, IP, and SN may be the driving forces behind our ability to learn complex action sequences.
QCD matter is expected to exist in different phases, when heated to high temperatures and getting highly compressed. Each phase could be characterized by distinct properties. A way to access extreme phases of matter in the laboratory are heavy-ion collisions at (ultra-)relativistic energies. During the collision, the temperature and density is evolving and reaches a maximum temperature and density far beyond the ground state of matter. The matter properties depend on the incident collision energy. Typically, a collision is separated into three collisions stages, namely first chance collisions (I), hot and dense stage (II) and freeze-out stage (III). Out of those, the second one is of major interest, since the extreme states of matter are generated within. For this reason, the most prominent change of the hadrons is expected to appear there in. Those changes are caused by i.e. modification of the hadronic spectral function. However, to retrieve such information is complicated. Hadrons are strongly interacting particles and therefore, carry little information about the hot and dense stage. For that purpose, decays of hadrons (low-mass vector mesons) to e+e- pairs via a virtual photon, so-called dielectrons, are an ideal probe. Electrons and positrons do not interact strongly and transport the information about the hot and dense stage nearly undisturbed to the detector. Unfortunately, the production of dielectrons is suppressed by a branching ratio of ≈ 10^(-5) and requires a precise lepton identification. Nonetheless, previous experiments have extracted a dilepton signal and observed in the low-mass range an excess over the hadronic cocktail. Latter one is expected to be caused by thermal radiation induced by the medium. Up to now, experiments conducted dilepton measurements with a focus on larger collision energies and large collision systems. Measurements of dielectrons at collision energies of around 1-2A GeV were only conducted for small and medium size collision systems. HADES continued the systematic studies by a measurement of Au+Au collisions at 1.23A GeV.
The detection of dielectrons requires detectors that handle high data rates and specific detectors for a high purity lepton identification. In HADES, the strongest separation of electrons or positrons from the hadronic background is provided by a ring imaging Cherenkov detector (RICH). Its electron identification is based on Cherenkov photons, that are emitted in ring like patterns. In this work a new approach, using the time-of-flight information to preselect electrons and the reconstructed particle trajectory to estimate ring positions, is utilized to improve the lepton identification. The concept of the so-called backtracking algorithm will be explained and applied to e+e- identification in Au+Au collisions. The whole analysis chain comprises single lepton identification, pair reconstruction and correction for efficiency and acceptance losses. The final pair spectra will be presented in form of their invariant mass, pt, mt and helicity distributions. Subsequently, transport model calculations as well as results from the recently developed coarse-grained transport approach will be compared to the dielectron spectra. Moreover, the centrality dependence of the excess yield and true (not "blue-shifted") temperature of the fireball will be presented. The results will be put in context to measurements of lighter collisions systems and at higher energies.
The Facility for Antiproton and Ion Research (FAIR) at GSI Darmstadt will provide unprecedented intensities of protons and heavy ions up to uranium at energies of up to 29 GeV for protons and 2.7 GeV/u for Uranium 28+. To achieve high intensities in the synchrotron accelerators, high beam currents have to be provided by the injector linear accelerators. High current heavy ion beams are provided by the Universal Linear Accelerator (UNILAC), which in its current state will not be able to provide the required FAIR beam currents. This thesis deals with the development of upgrades for the UNILAC to ensure its high current capability. The first improvement is a matching section (MEBT) for the interface between the RFQ and the IH-DTL of the existing high current injector HSI at the UNILAC. With this new MEBT section, particle losses are eliminated and the overall beam quality is improved. As a second improvement, a complete replacement of the existing Alvarez-DTL is presented. A combination of efficient IH-type cavities and KONUS beam dynamics results in a reduction of the linac length from about 60 m (Alvarez) to just 23 m (new IH-DTL) while providing the same energy and fulfilling FAIR requirements of a high beam current and beam quality. This thesis contains a detailed beam dynamics design of the new linac including some fundamental investigations of the KONUS beam dynamics concept. A cross-check of the beam dynamics design was performed with two independent multi-particle simulation codes. Detailed error studies were conducted to investigate the influence of manufacturing, alignment and operating errors on the beam dynamics performance. Additionally, all five linac cavities were designed, optimized, and their RF parameters including power requirements calculated to provide a comprehensive linac design.
In this doctoral thesis the transformation from relativistic hydrodynamics to transport and vice versa is studied. Approximations made by hybrid (hydrodynamics + transport) simulations of relativistic heavy ion collisions are discussed and their reliability is assessed at intermediate collision energies. A new method to simulate heavy ion collisions is suggested, based on the forced thermalization in high-density regions.
In dieser Arbeit wurden thermodynamische Eigenschaften eines chiralen Quark Meson Modelles untersucht. Das chirale Quark Meson Model beschreibt die starke Wechselwirkung über den Austausch von Mesonen und zudem die thermische und dichteabhängige Entwicklung der Quarkmassen im Medium über die chirale Symmetrie.Im SU(2) Model wurde zunächst in mean field approximation gearbeitet, um im Anschluss den divergenten Vakuumterm mit einzubeziehen. Nach eingehender Untersuchung der Ergebnisse, wurden dann die thermischen Mesonenfluktuationen studiert. In beiden Ansätzen verschiebt die Nullpunktsenergie den chiralen Phasenübergang zu höheren Temperaturen, wodurch die Massen bei höheren Temperaturen entarten. Beide Ansätze wurden dann zu einem gemeinsamen Modell kombiniert, um den Einfluss der Mesonenfluktuationen auf Ordnungsparameter, Massen und thermodynamische Grössen zu untersuchen. Als Fazit der Studie kann behauptet werden, dass sich der Einfluss der Mesonenfluktuationen in grösserem Maÿ auf die Thermodynamik, als auf den Ordnungsparameter und die Massen auswirkt. Im SU(3) Modell wurden ebenfalls regularisiert und zudem Vektormesonen mitberücksichtigt, welche die Repulsion zwischen den einzelnen Freiheitsgraden modelliert. Die Zustandsgleichung wird durch den Vakuum Term etwas softer und zeigt ein ähnliches Verhalten im niederen Energiebereich. Untersucht wurde neben der Temperatur T, die Elektron Baryon Rate Ye, die Sigma Meson Masse noch der Einfluss der Vektorkopplung. Aus der Zustandsgleichung konntendann Isentropen im T-mu Phasendiagramm errechnet werden, welche in naher Zukunft Aufschluss über eine dritte Familie von kompakten Sternen in Zusammenhang mit der entsprechenden Supernova Explosion geben könnte. Um die Existenz von kompakten Sternen genauer zu analysieren, wurde das chiraleSU(3) Quark Meson Modell bei T = 0 benutzt, um über die aus dem Formalismusgewonnenen Grössen Druck und Energiedichte die Tolmann-Oppenheimer-Volkoff zu lösen. Diese stellen die Masse-Radius Beziehungen kompakter Objekte dar. Auf der Suche nach Twin Stern Lösungen aus dem chiralen SU(3) Quark Meson Model wurde zunächst ein Modell für Hybridsterne entwickelt. Im untersuchten Parameterbereich fanden wir Hybrid Stern Lösungen, bei welchen der Einfluss der Quarkmaterie auf die Stabilität des Sternes untersucht wurde, denn das Einsetzen des Phasenüberganges übt einen zusätzlichen gravitativen Zug auf die hadronische Kruste aus. Der Stern ist stabil, wenn der Druck der Quarkmaterie diesem zusätzlichen Zug standzuhalten vermag. Für einen zu grossen Sprung in der Energiedichte werden die Lösungen jedoch instabil. Zwillingssterne waren nicht unter den Lösungen, da der Übergangsdruck relativklein sein muss, während der Energiedichtesprung eher gross sein sollte. Das Auftreten zweier stabiler Äste in der Masse Radius Relation kann allerdingsmit dem SU(3) Modell und entsprechendem chiralen Phasenübergang modelliert werden. Für einen gewissen Parameterbereich einhergehend mit kleinem Wert des Vakuum Druckes B konnten Nicht-Linearitäten in der Zustangsgleichungzur Lösung der TOV Gleichung beitragen. Im Weitern ist das Zusammenspiel der Vektorkopplung und der Sigma Mesonen Masse einflussreich auf die Lösungen, welche auf Kausalität, Stabilität und neben der 2 Sonnenmassen Bedingung noch auf Restriktionen vom millisecond pulsar PSR J1748-2446ad untersucht wurden.Mit Weltraummissionen wie etwa NICER (Neutron star Interior CompositionExploreR) sollte die Radiusbestimmung kompakter Objekte in Zukunft bis auf einen Kilometer genau bestimmt werden können. Die Entdeckung von zweiSternen mit der gleichen Masse und unterschiedlichen Radien wäre in der Tat ein Beweis für die Existenz von Zwillingssternen, welche dann die Theorie des Phasenüberganges in dichter Materie untermauern würde. Das Kollaps-Szenario eines Zwillingssternes würde weiteren Aufschluss über Neutrino-Emmissivität, Gamma-ray burster und Gravitationswellen Signale geben können. Dynamische Simulationen in allgemein relativistischem Kontext für compact star merger mit den hier diskutierten Zustandsgleichungen sind bereits in Planung, um Eigenschaftenwie beispielsweise das Temperatur- und Dichteprofil solcher Objekte genauer zu analysieren.
Cleaning an ion beam from unwanted fractions is crucial for intense ion beams. This thesis will explore separation methods using a collimation channel, electric and magnetic dipoles and a velocity selector for low intensity beams on an experimental basis. In addition, statistical data of degassing events during the commissioning of a pentode extraction system for beam energies from 20 - 120keV will be presented.
This thesis aimed at identifying and understanding the interplay of charge and lattice degrees of freedom at metal-insulator transitions that are driven by strong electron correlations, i.e., Mott and charge-order metal-insulator transitions. To this end, measurements of the thermal expansion were performed, which have proven to be particularly suited to deliver insight into the role of lattice degrees of freedom in strongly correlated electron systems. Prime examples of such systems are the herein studied organic charge-transfer salts which stand out by a high tunability of the interaction strength.
The central topic of this thesis was the investigation of the universal behavior of the pressure-induced finite-temperature Mott critical endpoint in the organic charge-transfer salt kappa-(BEDT-TTF)2Cu[N(CN)2]Cl. In the present work, it was proven experimentally that lattice effects play a crucial role for the universal behavior, in contrast to the assumption made in previous works.
In April and May 2012 data on Au+Au collisions at beam energies of Ekin = 1.23A GeV were recorded with the High Acceptance Di-Electron Spectrometer, which is located at the GSI Helmholtz Center for Heavy Ion Research in Darmstadt, Germany. At this beam energy all hadrons containing strangeness are produced below their elementary production threshold. The required energy is not available in binary NN collisions but must be provided by the system e.g. through multi-particle interactions or medium effects like a modified in-medium potential (e.g. KN/ΛN potential). Thus, a high sensitivity to these medium effects is expected in the investigated system.
The baryon-dominated systems created in relativistic heavy-ion collisions (HIC) at SIS18 energies reach densities of about 2-3 times ground state density p0 and may be similar to the properties of matter expected in the inner core of neutron stars. It is in particular the behavior of hadrons containing strangeness, i.e. kaons and hyperons, and their potentials in the dense medium which may have severe implications on astrophysical objects and processes. As ab-initio calculations of quantum chromodynamics (QCD) cannot be performed rigorously on the lattice at finite baryo-chemical potentials due to the fermion sign problem, effective descriptions have to be used in order to model properties of dense systems and the involved particles. The only way to access the in-medium potential of strange hadrons above nuclear ground state density p0 is by comparing data from relativistic HIC to such effective microscopic models. Up to now, not much data on neutral kaons and Λ hyperons are available from heavy collision systems close to their NN production threshold. These two electromagnetically uncharged strange hadrons are in particular well suited to study their potential in a dense nucleon-dominated environment as their kinematic spectra are not affected by Coulomb interactions.
We study the sensitivities of the directed flow in Au+Au collisions on the equation of state (EoS), employing the transport theoretical model JAM. The EoS is modified by introducing a new collision term in order to control the pressure of a system by appropriately selecting an azimuthal angle in two-body collisions according to a given EoS. It is shown that this approach is an efficient method to modify the EoS in a transport model. The beam energy dependence of the directed flow of protons is examined with two different EoS, a first-order phase transition and crossover. It is found that our approach yields quite similar results as hydrodynamical predictions on the beam energy dependence of the directed flow; Transport theory predicts a minimum in the excitation function of the slope of proton directed flow and does indeed yield negative directed flow, if the EoS with a first-order phase transition is employed. Our result strongly suggests that the highest sensitivity for the critical point can be seen in the beam energy range of 4.7 ≤√sNN≤11.5GeV.
I summarize recent developments in the hard-thermal-loop approach to QCD. I first discuss a finite-temperature and -density calculation of QCD thermodynamics at NNLO from the hard-thermal-loop perturbation theory. I then discuss a generalization of the hard-thermal-loop framework to the magnetic scale g2T, from which a novel non-Abelian massless mode is uncovered.
We study a random matrix model for QCD at finite density via complex Langevin dynamics. This model has a phase transition to a phase with nonzero baryon density. We study the convergence of the algorithm as a function of the quark mass and the chemical potential and focus on two main observables: the baryon density and the chiral condensate. For simulations close to the chiral limit, the algorithm has wrong convergence properties when the quark mass is in the spectral domain of the Dirac operator. A possible solution of this problem is discussed.
We report on the results on the dynamical modelling of cluster formation with the new combined PHSD+FRIGA model at Nuclotron and NICA energies. The FRIGA clusterization algorithm, which can be applied to the transport models, is based on the simulated annealing technique to obtain the most bound configuration of fragments and nucleons. The PHSD+FRIGA model is able to predict isotope yields as well as hypernucleus production. Based on present predictions of the combined model we study the possibility to detect such clusters and hypernuclei in the BM@N and MPD/NICA detectors.
The properties of matter at finite baryon densities play an important role for the astrophysics of compact stars as well as for heavy ion collisions or the description of nuclear matter. Because of the sign problem of the quark determinant, lattice QCD cannot be simulated by standard Monte Carlo at finite baryon densities. I review alternative attempts to treat dense QCD with an effective lattice theory derived by analytic strong coupling and hopping expansions, which close to the continuum is valid for heavy quarks only, but shows all qualitative features of nuclear physics emerging from QCD. In particular, the nuclear liquid gas transition and an equation of state for baryons can be calculated directly from QCD. A second effective theory based on strong coupling methods permits studies of the phase diagram in the chiral limit on coarse lattices.
The aim of this thesis is finding a geometric configuration that allows electron insertion into a Gabor plasma lens in order to increase the density of the confined electrons and provide ignition conditions at parameters where ignition is not possible. First, simulations using CST and bender were conducted to investigate several geometric configurations in terms of their performance of inserting electrons manually. One particular design has been chosen as a basis for an experiment. In order to prepare the experiment, further simulations using the code bender have been conducted to investigate the density distribution that is formed inside the Gabor lens when inserting electrons transversally in compliance with the chosen design. Additionally, bender was used to investigate the impact of the initial electron energy on the distribution inside the lens. Simulations with and without space charge effects have shown a significant impact of the space charge effects on the resulting density dstribution. Therefore, space charge effects have proven to be the major electron redistribution process. A given electron source was characterised in order to find the performance under the conditions inside a Gabor lens. In particular, a transversal magnetic field that will be present in the experiment has to be compensated by shielding the inner regions of the source by a μ-metal layer. Using a μ-metal shield, transversal magnetic fields are sufficiently tolerable to perform measurements in a Gabor lens. Additionally, operating close to 100 eV electron energy yields a maximum in the emitted current. Adding a Wehnelt cylinder to the electron source furthermore improves the extracted current to roughly 1 mA. A test stand consisting of a newly designed anode for the Gabor lens, as well as a terminal for the electron source, was constructed. The electron source was thoroughly characterised in the environment of the Gabor lens and the ignition properties of the new system were evaluated. In further experiments, electron beam assisted ignition by increasing the residual gas pressure was observed and the impact of the position of the electron source on the ignition properties was investigated. In addition, ignition of a sub-critical state, that is a state consisting of potential, magnetic field and pressure that did not yet perform ignition by itself, was performed by increasing the extracted current from the electron source. Finally, the electron source was used to influence a pre-ignited plasma. The density was measured, which was increased by the use of the electron source in most cases. This project is part of the EDEN collaboration (Electron DENsity boosting) of the NNP Group at IAP Frankfurt with INFN institutes in Bologna and Catania.
The production of 77,79,85,85mKr and 77Br via the reaction Se(a, x) was investigated between Ea = 11 and 15 MeV using the activation technique. The irradiation of natural selenium targets on aluminum backings was conducted at the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, Germany. The spectroscopic analysis of the reaction products was performed using a high-purity germanium detector located at PTB and a low energy photon spectrometer detector at the Goethe University Frankfurt, Germany. Thicktarget yields were determined. The corresponding energy-dependent production cross sections of 77,79,85,85mKr and 77Br were calculated from the thicktarget yields. Good agreement between experimental data and theoretical predictions using the TALYS-1.6 code was found.
Overrepresentation of bidirectional connections in local cortical networks has been repeatedly reported and is a focus of the ongoing discussion of nonrandom connectivity. Here we show in a brief mathematical analysis that in a network in which connection probabilities are symmetric in pairs, Pij = Pji, the occurrences of bidirectional connections and nonrandom structures are inherently linked; an overabundance of reciprocally connected pairs emerges necessarily when some pairs of neurons are more likely to be connected than others. Our numerical results imply that such overrepresentation can also be sustained when connection probabilities are only approximately symmetric.