Refine
Year of publication
- 2023 (327) (remove)
Document Type
- Preprint (170)
- Article (102)
- Doctoral Thesis (30)
- Conference Proceeding (12)
- Contribution to a Periodical (9)
- Book (3)
- Bachelor Thesis (1)
Has Fulltext
- yes (327)
Is part of the Bibliography
- no (327)
Keywords
Institute
- Physik (327) (remove)
The interaction between Λ baryons and kaons/antikaons is a crucial ingredient for the strangeness S=0 and S=−2 sector of the meson–baryon interaction at low energies. In particular, the ΛK‾ might help in understanding the origin of states such as the Ξ(1620), whose nature and properties are still under debate. Experimental data on Λ–K and Λ–K‾ systems are scarce, leading to large uncertainties and tension between the available theoretical predictions constrained by such data. In this Letter we present the measurements of Λ–K⊕+Λ‾–K− and Λ–K⊕−Λ‾–K+ correlations obtained in the high-multiplicity triggered data sample in pp collisions at s=13 TeV recorded by ALICE at the LHC. The correlation function for both pairs is modeled using the Lednický–Lyuboshits analytical formula and the corresponding scattering parameters are extracted. The Λ–K⊕−Λ‾–K+ correlations show the presence of several structures at relative momenta k⁎ above 200 MeV/c, compatible with the Ω baryon, the Ξ(1690), and Ξ(1820) resonances decaying into Λ–K− pairs. The low k⁎ region in the Λ–K⊕−Λ‾–K+ also exhibits the presence of the Ξ(1620) state, expected to strongly couple to the measured pair. The presented data allow to access the ΛK+ and ΛK− strong interaction with an unprecedented precision and deliver the first experimental observation of the Ξ(1620) decaying into ΛK−.
Quarkyonic or baryquark matter? On the dynamical generation of momentum space shell structure
(2023)
We study the equation of state of a mixture of (quasi-)free constituent quarks and nucleons with hard-core repulsion at zero temperature. Two opposite scenarios for the realization of the Pauli exclusion principle are considered: (i) a Fermi sea of quarks surrounded by a shell of baryons – the quarkyonic matter, and (ii) a Fermi sea of nucleons surrounded by a shell of quarks which we call baryquark matter. In both scenarios, the sizes of the Fermi sea and shell are fixed through energy minimization at fixed baryon number density. While both cases yield a qualitatively similar transition from hadronic to quark matter, we find that baryquark matter is energetically favored in this setup and yields a physically acceptable behavior of the speed of sound without the need to introduce an infrared regulator. In order to retain the theoretically more appealing quarkyonic matter as the preferred form of dense QCD matter will thus require modifications to the existing dynamical generation mechanisms, such as, for example, the introduction of momentum-dependent nuclear interactions.
Cryo-electron tomography (CryoET) resolves individual macromolecules inside living cells. However, the complex composition and high density of cells challenge the faithful identification of features in tomograms. Here, we capitalize on recent advances in electron tomography and demonstrate that 3D template matching (TM) localizes a wide range of structures inside crowded eukaryotic cells with confidence 10 to 100-fold above the noise level. We establish a TM pipeline with systematically tuned parameters for automated, objective and comprehensive feature identification. High-fidelity and high-confidence localizations of nuclear pore complexes, vaults, ribosomes, proteasomes, lipid membranes and microtubules, and individual subunits, demonstrate that TM is generic. We resolve ~100-kDa proteins, connect the functional states of complexes to their cellular localization, and capture vaults carrying ribosomal cargo in situ. By capturing individual molecular events inside living cells with defined statistical confidence, high-confidence TM greatly speeds up the CryoET workflow and sets the stage for visual proteomics.
Proton-powered c-ring rotation in mitochondrial ATP synthase is crucial to convert the transmembrane protonmotive force into torque to drive the synthesis of ATP. Capitalizing on recent cryo-EM structures, we aim at a structural and energetic understanding of how functional directional rotation is achieved. We performed multi-microsecond atomistic simulations to determine the free energy profiles along the c-ring rotation angle before and after the arrival of a new proton. Our results reveal that rotation proceeds by dynamic sliding of the ring over the a-subunit surface, during which interactions with conserved polar residues stabilize distinct intermediates. Ordered water chains line up for a Grotthuss-type proton transfer in one of these intermediates. After proton transfer, a high barrier prevents backward rotation and an overall drop in free energy favors forward rotation, ensuring the directionality of c-ring rotation required for the thermodynamically disfavored ATP synthesis. The essential arginine of the a-subunit stabilizes the rotated configuration through a salt-bridge with the c-ring. Overall, we describe a complete mechanism for the rotation step of the ATP synthase rotor, thereby illuminating a process critical to all life at atomic resolution.
Proton-powered c-ring rotation in mitochondrial ATP synthase is crucial to convert the transmembrane protonmotive force into torque to drive the synthesis of ATP. Capitalizing on recent cryo-EM structures, we aim at a structural and energetic understanding of how functional directional rotation is achieved. We performed multi-microsecond atomistic simulations to determine the free energy profiles along the c-ring rotation angle before and after the arrival of a new proton. Our results reveal that rotation proceeds by dynamic sliding of the ring over the a-subunit surface, during which interactions with conserved polar residues stabilize distinct intermediates. Ordered water chains line up for a Grotthuss-type proton transfer in one of these intermediates. After proton transfer, a high barrier prevents backward rotation and an overall drop in free energy favors forward rotation, ensuring the directionality of c-ring rotation required for the thermodynamically disfavored ATP synthesis. The essential arginine of the a-subunit stabilizes the rotated configuration through a salt-bridge with the c-ring. Overall, we describe a complete mechanism for the rotation step of the ATP synthase rotor, thereby illuminating a process critical to all life at atomic resolution.
Precise tune determination and split beam emittance reconstruction at the CERN PS synchrotron
(2023)
In accelerator physics, the need to improve the performance and better control the operating point of an accelerator has become, year after year, an increasingly important need in order to achieve higher energies and brightness, as well as point-like particle beams. If this involves increasingly advanced technological developments (in terms, for example, of materials for more intense superconducting magnets), it can not take place in the absence of targeted studies of linear and non-linear beam dynamics. In the context of this Ph.D. thesis in physics, linear and non-linear dynamics of charged particles in circular accelerators is the topic that will be discussed and treated in detail. In particular, the presentation and discussion of the results will be divided in two main topics: the need to know the physical properties of a proton beam; and the development of innovative methods to determine and study the accelerator’s working point. With regard to the first topic, an innovative procedure will be presented to determine the transverse size of the PS beam in the beam extraction phase. Among the different ways the extraction occurs at the PS, the analysed one is based on the transverse splitting of the beam by means of non-linear fields. Thus, the knowledge of the transverse beam size is not trivial since resonant linear and non-linear beam structures (namely, core and islands) arise and, for each of them, the beam size has to be quantified. This parameter is crucial for two main reasons: the accelerator that will receive the beam exiting the upstream accelerator may have restrictions (physical or magnetic) that involve a partial or total loss of the incoming beam; and any experiments located downstream of the considered accelerator may need a beam with a transversal size as constant as possible; consequently, its monitoring and control are essential. The second topic concerns the accurate determination of the working point of an accelerator, defined as the number of transverse oscillations the particle beam travels per unit of accelerator circumference, both horizontally and vertically. This quantity is called horizontal and vertical tune, respectively. Their knowledge is also crucial to understand whether the beam will be stable or unstable. In fact, not all tune values are acceptable, as there are particular values that bring the beam into resonance. In this configuration, the amplitude of the transverse oscillations of the particles increases in an uncontrolled manner and leads to the loss of all or part of the beam. Note that, in particular operating conditions, the resonant conditions are sought and desired to model, in a suitable way, the transversal shape of the beam, such as the above mentioned PS extraction scheme. It is even clearer how much the determination of the machine working point is essential to determine the operating conditions of an accelerator. In this context, several methods (also taken from the field of applied mathematics) to calculate the tune will be demonstrated and tested numerically on different types of synthetic signals. At the end of this description, the use of experimental data will allow to obtain the benchmark of a new method for the direct calculation of some characteristic quantities of non-linear beam dynamics (namely, the amplitude detuning, i.e. the variation of tune as a function of intensity of the perturbation provided to the beam.
Cryo-electron tomography (cryo-ET) is a powerful method to elucidate subcellular architecture and to structurally analyse biomolecules in situ by subtomogram averaging (STA). Specimen thickness is a key factor affecting cryo-ET data quality. Cells that are too thick for transmission imaging can be thinned by cryo-focused-ion-beam (cryo-FIB) milling. However, optimal specimen thickness for cryo-ET on lamellae has not been systematically investigated. Furthermore, the ions used to ablate material can cause damage in the lamellae, thereby reducing STA resolution. Here, we systematically benchmark the resolution depending on lamella thickness and the depth of the particles within the sample. Up to ca. 180 nm, lamella thickness does not negatively impact resolution. This shows that there is no need to generate very thin lamellae and thickness can be chosen such that it captures major cellular features. Furthermore, we show that gallium-ion-induced damage extends to depths of up to 30 nm from either lamella surface.
Precise intensity monitoring at CRYRING@ESR: on designing a Cryogenic Current Comparator for FAIR
(2023)
In the field of today’s beam intensity diagnostic there is a significant gap in the non-interceptive, calibrated measurement of the absolute intensity of continuous (unbunched) dc beams with current amplitudes below 1 μA. At the Facility for Antiproton and Ion Research (FAIR) low-intensity DC beams will occur during slow extraction from the synchrotrons as well as for coasting beams of highly-charged or exotic nuclei in the storage rings. The lack of adequate beam instrumentation limits the experimental program as well as the accuracy of experimental results.
The Cryogenic Current Comparator (CCC) can close the diagnostic gap with a high-precision dc current reading independent of ion-species and of beam parameters. However, the established detector design based on a core with high magnetic permeability and on a radial shield geometry has well-known weaknesses concerning magnetic shielding efficiency and intrinsic current noise. To eliminate these weaknesses, a novel coreless CCC with a co-axial shield was constructed and combined with a high-performance SQUID contributed by the Leibniz-Institute of Photonic Technology (Leibniz-IPHT Jena). The new axial CCC model was compared to a radial CCC with the established design provided by the Friedrich-Schiller-University Jena. According to numerical simulations prepared at TU Darmstadt and test measurements of the detectors in the laboratory, the new design offered a significant improvement of the shielding factor – from 75dB to 207dB at the required dimensions – and eliminated all noise contributions from the core material, promising an improved current resolution. Although the lower inductance of the pickup coil reduced the coupling to the beam significantly, the noise properties of the new CCC type were comparable to the classical version with a high-permeability core. However, the expected decrease of the low-frequency noise and thus an increase of the current resolution could not be observed at this stage of development.
Consequently, the classical CCC based on the radial shielding and high-permeability core had to be installed in CRYRING@ESR to provide best possible intensity measurements for the upcoming experimental campaign. In CRYRING the CCC was operated with beam currents between 1nA and 20μA and with different ion species (H, Ne, O, Pb, U). It was shown that the CCC provides a noise-limited current resolution of better than 3.2 nArms at a bandwidth of 200 kHz as well as a noise level below 40 pA/√Hz above 1 kHz. During the operation, the main noise sources of the accelerator environment had to be identified and suitable mitigation strategies were developed. Temperature and pressure fluctuations were suppressed with a newly-designed cryogenic support system based on a 70 l helium bath cryostat, developed and built in collaboration with the Institut für Luft- und Kältetechnik Dresden, in combination with a helium re-liquefier. The cryogenic operating time was restricted to around 7 days, which must be expanded significantly in the future. Digital filters were developed to remove the perturbations of the helium liquefier and of the neighboring dipole magnets. Given the promising results the CCC system can be considered as a prototype for future CCCs at FAIR.
This thesis deals with several aspects of non-perturbative calculations in low-dimensional quantum field theories. It is split into two main parts:
The first part focuses on method development and testing. Using exactly integrable QFTs in zero spacetime dimensions as toy models, the need for non-perturbative methods in QFT is demonstrated. In particular, we focus on the functional renormalization group (FRG) as a non-perturbative exact method and present a novel fluid-dynamic reformulation of certain FRG flow equations. This framework and the application of numerical schemes from the field of computational fluid dynamics (CFD) to the FRG is tested and benchmarked against exact results for correlation functions. We also draw several conclusions for the qualitative understanding and interpretation of renormalization group (RG) flows from this fluid-dynamic reformulation and discuss the generalization of our findings to realistic higher-dimensional QFTs.
The topics discussed in the second part are also manifold. In general, the second part of this thesis deals with the Gross-Neveu (GN) model, which is a prototype of a relativistic QFT. Even though being a model in two spacetime dimensions, it shares many features of realistic models and theories for high-energy particle physics, but also emerges as a limiting case from systems in solid state physics. Especially, it is interesting to study the model at non-vanishing temperatures and densities, thus, its thermodynamic properties and phase structure.
First, we use this model to test and apply our findings of the first part of this thesis in a realistic environment. We analyze how the fluid-dynamic aspects of the FRG realize themselves in the RG flow of a full-fledged QFT and how we profit from this numeric framework in actual calculations. Thereby, however, we also aim at answering a long-standing question: Is there still symmetry breaking and condensation at non-zero temperatures in the GN model, if one relaxes the commonly used approximation of an infinite number of fermion species and works with a finite number of fermions? In short: Is matter (in the GN model) in a single spatial dimension at non-zero temperature always gas-like?
In general, we also use the GN model to learn about the correct description of QFTs at non-zero temperatures and densities. This is of utmost relevance for model calculations in low-energy quan- tum chromodynamics (QCD) or other QFTs in medium and we draw several conclusions for the requirements for stable calculations at non-zero chemical potential.
Investigation of the kinematics involved in compton scattering and hard X-ray photoabsorption
(2023)
The present work investigates the kinematics of Compton scattering at gaseous, internally-cool helium and molecular nitrogen targets in the high- and the low-energy regime. Additionally, photoionization at molecular nitrogen with high-energy photons is investigated. These exeprimental regimes were previously inaccessible due to the extremely small cross sections involved. Nowadays, the third- and fourth-generation synchrotron machines produce sufficient photon flux, enabling the investiagtion of the above processes. The utilized cold-target recoil-ion momentum spectroscopy (COLTRIMS) technique further increases the detection efficiency of the observed processes, since it enables full-solid-angle detection by exploiting momentum conservation.
Compton scattering is investigated at both high (helium and N2) and low (helium) photon energies. In the high-energy regime, the impulse approximation is mostly valid, which is not the case for the low-energy regime. The impulse approximation assumes that the Compton-scattering process takes place at a free electron with a momentum distribution as if it was bound, thus ignoring the binding energy of the system. In the low-energy regime, the impulse approximation is not valid.
Photoionization is investigated at high photon energies, where the linear momentum of the photon cannot be neglected, as is the fashion of the commonly used dipole approximation.
Magnetische Quadrupole und Solenoide sind ein elementarer Bestandteil einer Beschleunigeranlage und begrenzen die transversale Ausdehnung eines Teilchenstrahls durch eine Reflexion der Teilchen in Richtung der Beschleunigerachse. Die konventionelle Bauweise als Elektromagnet besteht aus einem Eisenjoch welches mit Spulen umwickelt ist. In dieser Arbeit werden diese Magnetstrukturen auf Basis von Permanentmagneten designt und hinsichtlich ihrer Qualität zum Strahltransport optimiert, sowie Feldmessungen an permanentmagnetischen Quadrupolen durchgeführt. Diese wurden mit 3D-gedruckten Halterungen aus Kunststoff gefertigt, was eine Vielzahl von Formvariationen ermöglicht. Darauf aufbauend wurde ein im Vakuum befindlicher Aufbau entwickelt, mit welchem die Strahlenvelope im inneren eines permanentmagnetischen Quadrupol Tripletts diagnostiziert werden kann. Dies greift auf ein am Institut für angewandte Physik entwickeltes System zur nicht-invasiven Strahldiagnose mithilfe von Raspberry Pi Einplatinencomputern und Kameras in starken Magnetfeldern zurück.
Die in dieser Arbeit vorgestellte Konfiguration eines PMQ’s ist eine Weiterentwicklung des am CERN im Linac4, einem Alvarez-Driftröhrenbeschleuniger zur Beschleunigung von H– , verwendeten Designs. Bei diesem sind je acht quaderförmige Permanentmagnete aus Samarium Cobalt (SmCo) in die Driftröhren des Beschleunigers integriert.
Darauf aufbauend wurden die geometrischen Designparameter hinsichtlich ihres Einflusses auf die Qualität des Magnetfelds untersucht. In einem magnetischen Quadrupol zur Strahlfokussierung wird dies durch einen linearen Anstieg des Magnetfeldes von Quadrupolachse zu Polflächen charakterisiert. Das Design wurde im Zuge dessen zur Verwendung von industriellen Standardgeometrien von Quadermagneten und der Erhöhung der magnetischen Flussdichte erweitert. Dazu wurde untersucht wie sich das Hinzufügen von zusätzlichen Magneten auswirkt und ob eine bessere Feldqualität durch andere Magnetformen erreicht wird.
Die Kombination mehrerer PMQ in geringem Abstand (<10 mm) führt abhängig von der Geometrie der PMQ-Singlets zu einer erheblichen Verschlechterung der Feldlinearität, was eine Erhöhung des besetzten Phasenraumvolumens der Teilchen nach sich zieht.
Am Beispiel von PMQ-Tripletts werden die zu beachtenden Designparameter analysiert und Lösungsansätze vorgestellt. Die auftretenden Effekte werden anhand von Strahldynamiksimulation veranschaulicht. Für eine Anwendung der vorgestellten Designs wurde eine Magnethülle mit einer Wabenstruktur zur Aufnahme der Einzelmagnete entwickelt. Diese besteht aus zwei Halbschalen, welche jeweils den Kompletteinschluss aller Magnete garantiert und eine einfache Montage um ein Strahlrohr ermöglicht. Diese wurden in der Institutswerkstatt aus Kunststoff via 3D-Druck gefertigt. Aufgrund der höheren erreichbaren Magnetisierung wurden Neodym-Eisen-Bor-Magnete (Nd2F14B, Br =1,36 T) für den Bau der entwickelten Strukturen verwendet. Für eine Magnetfeldmessung zur Bestätigung der magnetostatischen Simulationen und einer Bewertung der Druckqualität wurde eine motorisierte xyz-Stage zur Bewegung einer Hallsonde aufgebaut. Die Messungen zeigen eine gute Zentrierung des Magnetfeldes, sodass PMQ mit einer Kunststoffhalterung eine schnelle und billige Möglichkeit sind, kurzfristig eine Quadrupol-Konfiguration aufzubauen. Die Kosten belaufen sich für einen einzelnen PMQ je nach Länge auf 50€ bis 100€.
Basierend auf der PMQ-Struktur wurde ein PMQ-Triplett in ein Vakuum versetzt und mit Raspberry Pi Kameras im Zwischenraum der Singlets ausgestattet. Dies ermöglichte die Aufnahme der Strahlenvelope innerhalb des Tripletts anhand der durch einen Heliumstrahl induzierten Fluoreszenz und erste Erkenntnisse für notwendige Weiterentwicklungen wurden gesammelt. Auf den genauen technischen Aufbau wird im abschließenden Kapitel der Arbeit detailliert eingegangen.
In der einfachsten Form wird ein PM-Solenoid anhand eines einzelnen axial magnetisierten Hohlzylinders realisiert und erzeugt näherungsweise die Feldverteilung einer Zylinderspule. Durch die radialen Magnetfeldkomponenten an den Rändern des Solenoiden erhalten Teilchen eine tangentiale Geschwindigkeitskomponente und führen eine Gyrationsbewegung entlang der Solenoidachse aus. Diese reduziert den Strahlradius und die Teilchen behalten eine Geschwindigkeitskomponente, welche zur Solenoidachse zeigt. Für eine Maximierung dieser Fokussierung muss das Magnetfeld auf die Zylinderachse konzentriert werden. Insbesondere bei einer Verlängerung des Hohlzylinders wird die Kopplung der Polflächen über das Innenvolumen abgeschwächt. Aufgrund dessen wurde ein Design bestehend aus drei Hohlzylindersegmenten entwickelt. Dieses setzt sich aus zwei radial und einem axial magnetisierten Hohlzylinder zusammen und erhöht die mittlere magnetische Flussdichte für ausgewählte Geometrien um einen Faktor zwei im Vergleich zu einem einzelnen Hohlzylinder gleicher Geometrie. Dies ist gleichzusetzen mit einer Vervierfachung der Fokussierstärke, welche quadratisch mit der mittleren magnetischen Flussdichte skaliert. Die Strahldynamischen Konsequenzen werden anhand von Simulationen mit generierten Magnetfeldverteilungen erläutert. Für eine kostengünstige Bauweise wurde eine Design basierend auf quaderförmigen Magneten entwickelt.
Neutron stars are unique laboratories for the investigation of the high density properties of bulk matter. In this work, the astrophysical constraints for a phase transition from hadronic matter to deconfined quark matter are examined thoroughly. A scheme for relating known astrophysical observables such as mass, radius and tidal deformability to the parameter space of such a transition is devised and applied to the set of data currently available.
In order to span a wide parameter space, a highly parameterizable relativistic mean field equation in compliance with chiral effective field theory results is used, where the stiffness of the equation of state can be varied via the effective mass at saturation density. The phase transitions are modelled using a Maxwell construction and assumed to be of first order, with a constant speed of sound quark matter model. The resulting equations of state are analyzed and divided into four categories, which can be used to constrain the parameter space that allows phase transition. It is highlighted, that a subset of this parameter space would even be detectable without the need of higher precision measurements. A phase transition at high densities is shown to be particularly promising in this regard. Finally, the groundwork is laid to apply the equation of state used in this work for supernova or merger simulations, by extending it to non-zero temperatures.
Molecular mechanisms of inorganic-phosphate release from the core and barbed end of actin filaments
(2023)
The release of inorganic phosphate (Pi) from actin filaments constitutes a key step in their regulated turnover, which is fundamental to many cellular functions. However, the molecular mechanisms underlying Pi release from both the core and barbed end of actin filaments remain unclear. Here, we combine cryo-EM with molecular dynamics simulations and in vitro reconstitution to demonstrate how actin releases Pi through a ‘molecular backdoor’. While constantly open at the barbed end, the backdoor is predominantly closed in filament-core subunits and only opens transiently through concerted backbone movements and rotameric rearrangements of residues close to the nucleotide binding pocket. This mechanism explains why Pi escapes rapidly from the filament end and yet slowly from internal actin subunits. In an actin variant associated with nemaline myopathy, the backdoor is predominantly open in filament-core subunits, resulting in greatly accelerated Pi release after polymerization and filaments with drastically shortened ADP-Pi caps. This demonstrates that the Pi release rate from F-actin is controlled by steric hindrance through the backdoor rather than by the disruption of the ionic bond between Pi and Mg2+ at the nucleotide-binding site. Our results provide the molecular basis for Pi release from actin and exemplify how a single, disease-linked point mutation distorts the nucleotide state distribution and atomic structure of the actin filament.
Transient receptor potential (TRP) ion channels are among the most well-studied classes of temperature-sensing molecules. Yet, the molecular mechanism and thermodynamic basis for the temperature sensitivity of TRP channels remains to this day poorly understood. One hypothesis is that the temperature-sensing mechanism can simply be described by a difference in heat capacity between the closed and open channel states. While such a two-state model may be simplistic it nonetheless has descriptive value, in the sense that it can be used to to compare overall temperature sensitivity between different channels and mutants. Here, we introduce a mathematical framework based on the two-state model to reliably extract temperature-dependent thermodynamic potentials and heat capacities from measurements of equilibrium constants at different temperatures. Our framework is implemented in an open-source data analysis package that provides a straightforward way to fit both linear and nonlinear van ‘t Hoff plots, thus avoiding some of the previous, potentially erroneous, assumptions when extracting thermodynamic variables from TRP channel electrophysiology data.
Seit hundert Jahren ist bekannt, dass die mikroskopische Welt der Atome und Moleküle von den Gesetzen der Quantenphysik regiert wird. Lange Zeit galten Quantenphänomene als verworren und unkontrollierbar. Heute arbeiten Physikerinnen und Physiker daran, unter Nutzung quantenphysikalischer Effekte Materialien mit neuartigen Eigenschaften zu kreieren.
Am Teilchenbeschleuniger in Darmstadt werden die extremen Bedingungen unseres Universums im Labor erforscht. Dabei gelang es den Physikerinnen und Physikern, eine Technologie zu entwickeln, die Energie zur Teilchenbeschleunigung wiederverwendet und einspart. Der Teilchenbeschleuniger ist eingebunden in das Clusterprojekt ELEMENTS, das gemeinsam von der Goethe-Universität Frankfurt und der TU Darmstadt geleitet wird.
Terahertz (THz) radiation lies between the micro and far-infrared range in the electromagnetic spectrum. Compared with microwave and millimeter waves, it has a larger signal bandwidth and extremely narrow antenna beam. Thus, it is easier to achieve high-resolution for imaging and detection applications. The unique properties, such as penetration for majority non-polar materials, non-ionizing characteristic and the spectral fingerprint of materials, makes THz imaging an appealing artifice in the military, biomedical, astronomical communications, and other areas. However, THz radiation’s current low power level and detection sensitivity block THz imaging system from including fewer optical elements than the visible or infrared range. This leads to imaging resolution, contrast, and imaging field of view degenerate and makes the aberration more serious. THz imaging based on the space Fourier spectrum detection is developed in this thesis to achieve high-quality imaging. The main concept of Fourier imaging is by recording the field distribution in the Fourier plane (focal plane) of the imaging system; the information of the target is obtained. The numerical processing method is needed to extract the amplitude and phase information of the imaged target. With additional process, three-dimensional (3D) information can be obtained based on the phase information. The novel recording and reconstructing ways of the Fourier imaging system enables it to have a higher resolution, better contrast, and broader field of view than conventional imaging systems such as microscopy and plane to plane telescopic imaging system.
The work presented in this thesis consists of two imaging systems, one is working at 300 GHz based on the fundamental heterodyne detection of the THz radiation, the other is operated at 600 GHz by utilizing the sub harmonic heterodyne detection technique. The realization and test of the heterodyne detection are based on the THz antenna-coupled field-effect transistor (TeraFET) detector developed by Dr. Alvydas Lisauskas. Both systems use two synchronized electronic multiplier chains to radiate the THz waves. One radiation works as the local oscillator (LO), the other works as illumination with a slight frequency shift, the radiations are mixed on the detector scanning in the Fourier plane to record the complex Fourier spectrum of the imaged target. The LO has the same frequency range as the illuminating radiation for fundamental heterodyne detection but half the frequency range for the sub-harmonic heterodyne detection. The 2-mm resolution, 60-dB contrast, and 5.5-cm diameter imaging area at 300 GHz and the of 500-μm resolution, 40-dB contrast, and 3.5-cm diameter imaging area at 600 GHz are achieved (the 300-GHz illuminating radiation has the approximate power of 600 μW , the 600-GHz illuminating radiation has the approximate power of 60 μW ).
The thesis consists of 6 parts. After the introduction, the second chapter expands on the topic of Fourier optics from a theoretical point of view and the simulations of the Fourier imaging system. First, the theory of the electromagnetic field propagation in free space and through an optical system are investigated to elicit the Fourier transform function of the imaging system. The simulation is used for theoretical considerations and the implementation of a Fourier optic script that allows for numerical investigations on reconstruction. The preliminary imaging field of view and resolution are also demonstrated. The third chapter describes the Fourier imaging system at 300 GHz based on the fundamental heterodyne detection, including the experimental setup, the 2D, and 3D imaging results. The following fourth chapter reports the integration of the TeraFET detector with two substrate lenses (one is a Si lens on the back-side Si substrate, the other is a wax/PTFE lens on the front side containing the bonding wires) for sub-harmonic heterodyne detection at 600 GHz. The characteristic of the wax/PTFE lens at THz range is presented. After that, the compared imaging results between the detector with and without the wax/PTFE lens are shown. The fifth chapter extends the demonstration on the lateral and depth resolution of the Fourier imaging system in detail and uses the experimental results at 600 GHz to validate the analytical predictions. The comparison of the resolution between the Fourier imaging system and the conventional microscopy system proves that the Fourier imaging system has better imaging quality under the same system configuration. The last chapter in this thesis concludes on the findings of the THz Fourier imaging and gives an outlook for the enhancement of the Fourier imaging system at THz range.
In QCD at large enough isospin chemical potential Bose-Einstein Condensation (BEC) takes place, separated from the normal phase by a phase transition. From previous studies the location of the BEC line at the physical point is known. In the chiral limit the condensation happens already at infinitesimally small isospin chemical potential for zero temperature according to chiral perturbation theory. The thermal chiral transition at zero density might then be affected, depending on the shape of the BEC boundary, by its proximity. As a first step towards the chiral limit, we perform simulations of 2+1 flavors QCD at half the physical quark masses. The position of the BEC transition is then extracted and compared with the results at physical masses.
Phase transitions in a non-perturbative regime can be studied by ab initio Lattice Field Theory methods. The status and future research directions for LFT investigations of Quantum Chromo-Dynamics under extreme conditions are reviewed, including properties of hadrons and of the hypothesized QCD axion as inferred from QCD topology in different phases. We discuss phase transitions in strong interactions in an extended parameter space, and the possibility of model building for Dark Matter and Electro-Weak Symmetry Breaking. Methodological challenges are addressed as well, including new developments in Artificial Intelligence geared towards the identification of different phases and transitions.