Refine
Year of publication
Document Type
- Preprint (521)
- Article (288)
- Conference Proceeding (12)
- Part of a Book (5)
- Report (3)
- Working Paper (1)
Has Fulltext
- yes (830) (remove)
Is part of the Bibliography
- no (830)
Keywords
- Heavy Ion Experiments (20)
- Hadron-Hadron scattering (experiments) (11)
- Hadron-Hadron Scattering (8)
- Heavy-ion collision (5)
- Collective Flow (4)
- Quark-Gluon Plasma (4)
- Europa (3)
- Hagen <2001> (3)
- Jets (3)
- Jets and Jet Substructure (3)
Institute
- Physik (816)
- Frankfurt Institute for Advanced Studies (FIAS) (727)
- Informatik (696)
- Neuere Philologien (10)
- Informatik und Mathematik (3)
- Geowissenschaften (2)
- Medizin (2)
- Hochschulrechenzentrum (1)
Die Wirkungsweise des Protonen-Wendellinearbeschleunigers und sein prinzipieller Aufbau werden kurz beschrieben und Angaben über die erreichbare Parallelimpedanz gemacht. Es wird gezeigt, wie durch sektionsweisen Aufbau eine variable Endenergie erzielt und die Kühl- und Fokussierprobleme gelöst werden können. Zwei Konstruktionsbeispiele für kontinuierlichen und gepulsten Betrieb werden näher ausgeführt.
Determination of field strength and quality factor of heavily HOM damped accelerator cavities
(1992)
Two methods of of measuring field strength in accelerator cavities, heavily damped with respect to higher order modes (HOM), are presented. From the results of the field measurements the coupling (damping) factor and thus the quality factor of the damped resonator can be derived. Measurements of a pillbox resonator with heavily damped TM110-mode (Q < 20) demonstrate the usefulness of the techniques presented, even in this extreme range.
By replacing the irises in an electron linac by a slit one gets a structure capable of focussing/defocussing an electron beam (rf-quadrupoles). Therefore one can think of a combination of rf- and conventional magnetic quadrupoles for transversal focussing in linear-colliders. Furthermore they can meet the demands of BNS-damping without initial energy spread. Considering multibunch-operation of a collider, the long-range wake behaviour of this kind of structure has to be investigated. A three-cell structure has been built and investigated for dipole-type transversal long-range wakes. The experimental results are compared to numerical simulations done with MAFIA.
To reach high luminosities in future linear colliders short range wakes havea to be controlled in the range of X-band frequencies or higher. Rectangular irises can be used to introduce strong focusing quadrupole-like rf-fields. Even circular irises in iris-loaded accelarator structures have the capability of focusing if the particle velocity differs from phase velocity. Theoretical investigations concerning the focusing strength to be expected are presented. Their applicability for linear colliders is discussed.
A new method of measuring quality factors in cavities is presented. This method is well suited to measure quality factors in undamped cavities as well as in heavily damped cavities, and in addition this method provides a possibility of separating modes and measuring quality factors especially in cases of overlapping modes. Measurements have been carried out on HOM-damped cavities for the DESY/THD linear collider project. Results are presented.
Damping cells for the higher order modes are necessary for the S-band linear collider to minimize BBU (Beam-Break-Up). The construction of the damper cells has to take into account the different field geometries of the higher order modes. So two different types of dampers have been designed: a wall slotted an an iris slotted cell. In order to optimize the two types of damping cells with respect to damping strength, impedance matching between coupling system and waveguide dampers and between damping cell and undamped cells and the tuning system, damping cells of both types have been built and examinated.
The effect of a single HOM-damper cell within a channel of undamped cells is described theoretically using an equivalent circuit model. From this a simple equation can be derived which relates the Q-value of the single damping-cell, the bandwidth of the passband under consideration, and the additional phase shift which is introduced by the damper cell to provide energy flow into the damper cell. This equation immediately shows the limitations of such single cell damping systems. Comparisons with experimental results are shown.
Mode propagation in an iris type accelerator section loaded with single heavily HOM-damped cells
(1994)
The wakefield effects in accelerator sections for future linear colliders will be reduced either by damping by detuning or by a combination of both. For the DESY/THD linac [1] it is forseen to employ heavily HOM-damped cells to provide a strong coupling to the TE/TM11-dipole passband as well as to the TM/TE11-dipole passband. For our experiments we have used wall-slotted damping cells. This leads to several problems concerning the propagation of fundamental and HOM-modes. Experimental investigations have been done. Results are presented.
A new method for measuring quality factors in cavities is presented. This method is capable of measuring Q-factors in heavily damped as well as in undamped cavities. In addition, the possibility of separating overlapping modes and measuring their Q-factors is provided. Measurements on HOM (higher order mode) damped cavities for the DESY/THD linear collider project are presented
A new method for the determination of S-matrices of devices in multimoded waveguides and first experimental experiences are presented. The theoretical foundations are given. The scattering matrix of a TESLA copper cavity at a frequency above the cut-off of the second waveguide mode has been measured.
Plus de la moitié des Européens de l’U.E. parlent une langue romane comme langue maternelle. Parmi les autres Européens, l’apprentissage de langues romanes comme langue étrangère est très fréquent, il n’est dépassé que par l’anglais: Une «Romanophonie» pourrait s’appuyer donc sur une base large, tandis que ses valeurs intercompréhensives ne sont pas encore suffisamment mises à la disposition d’un publique européen. Au contraire: les nations créent de plus en plus des barrières entre les langues romanes en institutionnalisant les différences et non pas ce qu’elles ont en commun. En Allemagne où l’on trouve encore la philologie romane (Romanische Philologie) comme unité d’études on peut observer en même temps une tendance vers une spécialisation en études unilingues (Einzelphilologien). Un tel séparatisme linguistique à l’intérieur d’une seule famille renonce aux avantages intercommunicatifs et intercompréhensifs offerts par les langues romanes. Le phénomène de l’intercompréhension est largement connu, pas seulement parmi les romanistes. C’est le résultat d’une tradition de l’écrit et d’un héritage culturel - une partie importante de l’unité intellectuelle du continent européen - qui rend les langues romanes si accessibles. ...
Das Neldophon gehört mittlerweile zum internationalen Wortschatz Europas. Neldophonieren ist heute alltägliche Praxis. Die Globalisierung des ausgehenden zweiten Jahrtausends setzt die Entwicklung der Neldophonie voraus, um idealtypisch in naher Zukunft von jedem Punkt der Erde aus mit jedem beliebigen anderen Punkt in neldophonischer Verbindung zu sein. Eurosemantische Gemeinsamkeiten des Neldophonierens und die außersprachliche Partizipiation an der entsprechenden Technologie erleichterten die Akzeptanz des Terminus in den romanischen (und anderen) Sprachen Europas und der Welt trotz des Unikalmorphems Neldo-(vergleichbar mit Him- und Brom- in Him-, bzw. Brombeere) in Verbindung mit dem ansonsten global in verschiedenen Graphien verbreiteten Restmorphem -phon. Wörter haben ihre Geschichte. Der Ausdruck läßt sich auf seinen etymologischen Entstehungsort, den Congrés Europeu sobre Planificació Lingüística (Barcelona 9.-10. November 1995) zurückführen, andem auch der Gründer der FFM teilnahm. Offensichtlich wurde der Terminus hier in internationaler Umgebung erstmalig geprägt und sogleich panromanisch umgesetzt. Die barceloniner Gastgeber sprachen von neldòfon, während hingegen die wenigen Hispanophonen neldófono bevorzugten. Das Verbum neldofonar ist in der Zwischenzeit auch im Portugiesischen belegt, die Académie française wird sich kaum einer Äußerung enthalten können, ob neldophoner oder neldofoner (da offensichtlich im katalanischen Sprachbereich entstanden) die normgerechte Graphie repräsentiere, während Italien den europäischen Neologismus seit dem Herbst 1995 bereits kennt (chiamami più tardi al neldefono) und - zu Recht? - das etymologische ius primi loci beansprucht. In Rumänien erhielt das Verb eine systemimanente Stammerweiterung (Petre neldofoneazã mult) seit 1996. Nach zuverlässigen Quellen (Jernudd 1995) trat der Terminus Ende 1995 in seiner englischen Variante in Honkong in Kontakt mit dem Kantonesischen. Sein Überleben scheint jedoch hier (nach 1997) insbesondere wegen der phonologischen Problematik des liquiden Auslauts der Silbe nel- und diverser noch zu erwartender sprachpolitischer Konflikte nicht gesichert. Da die europäischen Neldophone in USA noch nicht funktionieren, ist eine gewisse Skepsis für den terminologischen Siegeszug der Neldophonie im Amerikanischen Englisch nicht unangebracht. ...
Due to the additional need of very short bunches for the FEL operation with the TESLA-machine strong wakefield effects are expected. One third of the total wakefield energy per bunch is radiated into the frequency region above the energy gap of Cooper pairs in superconducting niobium. The energy of the cooper pairs in superconducting niobium at 2 K corresponds to a frequency of 700 GHz. An analytical and experimental estimation for the overall energy loss of the FEL bunch above energy gap is presented. The analytical method is based on a study from R. B. Palmer [1]. The results of the wakefield estimations are used to calculate possible quality factor reduction of the TESLA cavities during FEL operation. Results are presented.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
The knowledge of the build up time of space charge compensation (SCC) and the investigation of the compensation process is of main interest for low energy beam transport of pulsed high perveance ion beams under space charge compensated conditions. To investigate experimentally the rise of compensation an LEBT system consisting of a pulsed ion source, two solenoids and a drift tube as diagnostic section has been set up. The beam potential has been measured time resolved by a residual gas ion energy analyser (RGA). A numerical simulation for the calculation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult measure directly. The results of the simulation has been compared with the measured data to investigate the behavior of the compensation electrons as a function of time. The acquired data shows that the theoretical rise time of space charge compensation is by a factor of two shorter than the build up time determined experimentally. In view of description the process of SCC an interpretation of the gained results is given.
For investigation of space charge compensation process due to residual gas ionization and the experimentally study of the rise of compensation, a Low Energy Beam Transport (LEBT) system consisting of an ion source, two solenoids, a decompensation electrode to generate a pulsed decompensated ion beam and a diagnostic section was set up. The potentials at the beam axis and the beam edge were ascertained from time resolved measurements by a residual gas ion energy analyzer. A numerical simulation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult to measure directly. The temporal development of the kinetic and potential energy of the compensation electrons has been analyzed by using the numerically gained results of the simulation. To investigate the compensation process the distribution and the losses of the compensation electrons were studied as a function of time. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. To describe the process of space charge compensation an interpretation of the achieved results is given.
Accelerating cavities exchange HOM power through interconnecting beam pipes in case of signal frequencies above the cut-off of their propagating waveguide modes. This may lead either to improved HOM damping or - in the case most severe - to unwanted phase coherence of fields to the beam. Therefore the knowledge of the scattering properties of a cavity as a line element is needed to analyse all kinds of RF cavity-cavity interaction. Since there is a lack of measurement tools capable to provide a multidimensional scattering matrix at a given frequency point, we have been developing a method for this purpose. It uses a set of 2-port S-parameters of the device under test, embedded in a number of geometrically different RF environments. The application of the method is demonstrated with copper models of TESLA cavities.
To preserve the required beam quality in an e+/e- collider it is necessary to have a very precise beam position control at each accelerating cavity. An elegant method to avoid additional length and beam disturbance is the usage of signals from existing HOM-dampers. The magnitude of the displacement is derived from the amplitude of a dipole mode whereas the sign follows from the phase comparison of a dipole and a monopole HOM. To check the performance of the system, a measurement setup has been built with an antenna which can be moved with micrometer resolution to simulate the beam. Furthermore we have developed a signal processing to determine the absolute beam displacement. Measurements on the HOM-damper cell can be done in the frequency domain using a network analyser. Final measurements with the nonlinear time dependent signal processing circuit has to be done with very short electric pulses simulating electron bunches. Thus, we have designed a sub nanosecond pulse generator using a clipping line and the step recovery effect of a diode. The measurement can be done with a resolution of about 10 micrometers. Measurements and numerical calculations concerning the monitor design and the pulse generator are presented.
To fulfil the requirements of ESS on beam transmission and emittance growth a detailed knowledge of the physics of beam formation as well as the interaction of the H- with the residual gas is substantial. Space charge compensated beam transport using solenoids for ion optics is in favour for the Low Energy Beam Transport (LEBT) between ion source and the first RFQ. Space charge compensation reduces the electrical self fields and beam radii and therefore emittance growth due to aberrations and redistribution. Transport of H- near the ion source is negatively influenced by the dipole fields required for beam extraction and e--dumping and the high gas pressure. The destruction of the rotational symmetry together with the space charge forces causes emittance growth and particle losses within the extraction system. High residual gas pressure near the extractor together with the high cross section for stripping will influence the transmission as well as space charge compensation. Therefore a detailed knowledge of the interaction of the residual gas with the beam and the influence of the external fields on the distribution of the compensation particles is necessary to reduce particle losses and emittance growth. Preliminary experiments using positive hydrogen ions for reference already show the influence of dipole fields on beam emittance. First measurements with H- confirm these results. Additional information on the interactions of the residual gas with the beam ions have been gained from the measurements using the momentum and energy analyser.
A LEBT system consisting of an ion source, two solenoids, and a diagnostic section has been set up to investigate the space charge compensation process due to residual gas ionization [1] and to study experimentally the rise of compensation. To gain the radial beam potential distribution time resolved measurements of the residual gas ion energy distribution were carried out using a Hughes Rojanski analyzer [2,3]. To measure the radial density profile of the ion beam a CCD-camera performed time resolved measurements, which allow an estimation the rise time of compensation. Further the dynamic effect of the space charge compensation on the beam transport was shown. A numerical simulation under assumption of selfconsistent states [4] of the beam plasma has been used to determine plasma parameters such as the radial density profile and the temperature of the electrons. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. An interpretation of the achieved results is given.
Für Romanisten ist Interkomprehension seit der Begründung ihrer Disziplin ein Anliegen, für romanischsprachige Menschen ist sie meist ein persönliches Erlebnis der partiellen Entdeckung, vor 1500 Jahren war sie alltägliche Realität. Es geht um die Fähigkeit, in einer Gruppe von Sprachen, die einen gemeinsamen Ursprung haben, kommunizieren zu können.
Läßt man die Problematik der bei dieser Aussage verwendeten Ausdrücke außer Betracht und schränkt den Blickwinkel auf die Gruppe der romanischen Sprachen ein, so lassen sich eine Reihe von Aussagen über Interkomprehension machen.
Daß zwischen dem sechsten und achten Jahrhundert, also während der protoromanischen Phase, Interkomprehension zwischen entfernten Gegenden des niedergegangen Imperium Romanum möglich war, ist unstrittig, freilich gab es keine außersprachlichen Gründe, die das Faktum Interkomprehension in den Vordergrund hätten rücken können. Die einzig übriggebliebene Zentralmacht Kirche benutzte ihr eigenes Latein. ...
Der sprachfamilienbezogene Erwerb einer L3 bis Lx hat durch die jüngeren sprachpolitischen Forderungen der Europäischen Kommission 1997 entscheidenden Auftrieb erhalten. Im Livre Blanc sur l´éducation et la formation von 1995 bilanziert die Europäische Kommission das Ergebnis der fremdsprachlichen Bemühungen der großen Flächenstaaten der Union als eher kümmerlich und fordert eine Wende. Künftig soll eine Europäische Mehrsprachigkeit drei Perspektiven aufweisen: eine differenzierte Betrachtung von Kompetenzen (rezeptive Mehrsprachigkeit), die Ermöglichung des gezielten Erwerbs von Teilkompetenzen mit modularen Aufbaumöglichkeiten (fachsprachlicher approach zur rezeptiven Lesekompetenz) und das Nutzen der Verwandtschaftsbeziehungen zwischen Sprachen (u.a. romanische Interkomprehensionsforschung). Diese drei Perspektiven werden in dem dreigliedrigen Projekt zur "Eurocomprehension" der Universität Frankfurt zusammengefaßt. Der Frankfurter Beitrag bezieht sich auf die Gruppe der romanischen Sprachen. ...
Investigation of the focus shift due to compensation process for low energy ion beam transport
(2000)
In magnetic Low Energy Beam Transport (LEBT) sections space charge compensation helps to enhance the transportable beam current and to reduce emittance growth due to space charge forces. For pulsed beams the time neccesary to establish space charge compensation is of great interest for beam transport. Particularly with regard to beam injection into the first accelerator section (e.g. RFQ) investigation of effects on shift of the beam focus due to space charge compensation are very important. The achieved results helps to obviate a mismatch into the first RFQ. To investigate the space charge compensation due to residual gas ionization, time resolved measurements using pulsed ion beams were performed at the LEBT system at the IAP and at the CEA-Saclay injektion line. A residual gas ion energy analyser (RGIA) equiped with a channeltron was used to measure the potential destribution as a function of time to estimate the rise time of compensation. For time resolved measurements (delta t min=50ns) of the radial density profile of the ion beam a CCD-camera was applied. The measured data were used in a numerical simulation of selfconsistant eqilibrium states of the beam plasma [1] to determine plasma parameters such as the density, the temperature, the kinetic and potential energy of the compensation electrons as a function of time. Measurements were done using focused proton beams (10keV, 2mA at IAP and 92keV, 62mA at CEA-Saclay) to get a better understanding of the influence of the compensation process. An interpretation of the acquired data and the achieved results will be presented.
The determination of the beam emittance using conventional destructive methods suffers from two main disadvantages. The interaction between the ion beam and the measurement device produces a high amount of secondary particles. Those particles interact with the beam and can change the transport properties of the accelerator. Particularly in the low energy section of high current accelerators like proposed for IFMIF, heavy ion inertial fusion devices (HIDIF) and spallation sources (ESS, SNS) the power deposited on the emittance measurement device can lead to extensive heat on the detector itself and can destruct or at least dejust the device (slit or grit for example). CCD camera measurements of the incident light emitted from interaction of beam ions with residual gas are commonly used for determination of the beam emittance. Fast data acquisition and high time resolution are additional features of such a method. Therefore a matrix formalism is used to derive the emittance from the measured profile of the beam [1,2] which does not take space charge effects and emittance growth into account. A new method to derive the phase space distribution of the beam from a single CCD camera image using statistical numerical methods will be presented together with measurements. The results will be compared with measurements gained from a conventional Allison type (slit-slit) emittance measurement device.
Influence of space charge fluctuations on the low energy beam transport of high current ion beams
(2000)
For future high current ion accelerators like SNS, ESS or IFMIF the beam behaviour in low energy beam transport sections is dominated by space charge forces. Therefore space charge fluctuations (e. g. source noise) can drastically influence the beam transport properties of the low energy beam transport section. Losses of beam ions and emittance growth are the most severe problems. For electrostatic transport systems either a LEBT design has to be found which is insensitive to variations of the space charge or the origin of the fluctuations has to be eliminated. For space charge compensated transport as proposed for ESS and IFMIF the situation is different: No major influence on beam transport is expected for fluctuations below a cut-off frequency given by the production rate of the compensation particles. Above this frequency the fluctuations can not be compensated by particle production alone, but redistributions of the compensation particles helps to compensate the influence of the fluctuations. Above a second cut-off frequency given by the density and the temperature of the compensation particles their redistribution is too slow to reduce the influence of the space charge fluctuations. Transport simulations for the IFMIF injector including space charge fluctuations will be presented together with a determination of the cut-off frequencies. The results will be compared with measurements of the rise time of space charge compensation.
The operation of a Free Electron Laser (FEL) in the ultraviolet or in the X-ray regime requires the acceleration of electron bunches with an rms length of 25 to 50 mikrometer. The wakefields generated by these sub picosecond bunches extend into the frequency range well beyond the threshold for Cooper pair breakup (about 750 GHz) in superconducting niobium at 2 K. It is shown, that the superconducting cavities can indeed be operated with 25 mikrometer bunches without suffering a breakdown of superconductivity (quench), however at the price of a reduced quality factor and an increased heat transfer to the superfluid helium bath. This was first shown by wakefield calculations based on the diffraction model [1]. In the meantime a more conventional method of computing wake fields in the time domain by numerical methods was developed and used for the wakefield calculations [2]. Both methods lead to comparable results: the operation of TESLA with 25 mikrometer bunches is possible but leads to an additional heat load due to the higher order modes (HOMs). Therefore HOM dampers for these high frequencies are under construction [3]. These dampers are located in the beam pipes between the 9-cell cavities. So it is of interest, if there are trapped modes in the cavity due to closed photon orbits. In this paper we investigate the existence of trapped modes and the distribution of heat load over the surface of the TESLA cavity by numerical photon tracking.
"Eurocomprehension" is the term used to describe European intercomprehension in Europe’s three major language families, the Romance, the Slavic and the Germanic. The aim of eurocomprehension is to achieve multilingualism conforming to EU language policy goals through the entry-point of receptive competence in a modular structure. Linguistic intercomprehension research forms the transfer bases for the cognitive use of relations between the language groups which didactics of multilingualism implement. ...
Le concept d’eurocompréhension signifie intercompréhension dans les trois grands groupes linguistiques européens, à savoir les langues romanes, slaves et germaniques. Il s’agit, en respectant les objectifs1 de la politique linguistique de l’Union Européenne, de parvenir de façon modulaire au plurilinguisme par le biais de compétences réceptives. Dans ce cadre, les recherches linguistiques effectuées sur l’intercompréhension fournissent les bases de transfert interlangues pour l’exploitation cognitive de la parenté entre les langues des groupes différents. ...
Rezeptive Mehrsprachigkeit ist eine der jüngsten Forderungen der EU-Kommission zum Erreichen einer realistischen Mehrsprachigkeit in Europa. Die maximalistischen Forderungen nach Perfektion in allen sprachlichen Kompetenzen haben sich in den nationalen Unterrichtswesen als illusionär erwiesen, da diese nirgendwo von statistisch nachvollziehbarem Erfolg gekrönt sind. Die sprachliche Diversität im multilingualen Europa findet sich nicht in der Realität der Bildungssysteme wieder. Zwar verfügen heute europaweit 26 % der Europäer über eine zweite und 8% über eine dritte Fremdsprache, in den einzelnen Ländern sieht es jedoch oft desolat aus. Während in den kleineren Unionsländern kaum jemand als nur monolingual gilt (Luxemburg 2%) ist die Krankheit der Einsprachigkeit in den großen EU-Staaten seuchenhaft verbreitet, etwa Großbritannien mit 66%. Dies hat in den neunziger Jahren in der Kommission zu den Postulaten geführt, die sich die Forschergruppe EuroCom als Programm gesetzt hat, nämlich Mehrsprachigkeit über den Einstieg in rezeptive Kompetenzen modularisiert und kognitiv über Transferbasen innerhalb von Sprachfamilien zu erreichen. EuroCom steht dabei als Kürzel für Eurocomprehension, ein Akronym für Europäische Interkomprehension in den drei großen Sprachengruppen Europas, der romanischen, slawischen und germanischen. Die Beschränkung auf rezeptive Kompetenzen ist dabei nur ein methodisches Ausgangsprinzip, das es ermöglicht, Mehrsprachigkeit besonders schnell über das Leseverständnis zu erreichen und modularisiert auf Hörverständnis und aktive Sprechkompetenz sukzessiv auszuweiten. Die Methode EuroCom arbeitet über die Aktivierung intralingualen Wissens mit linguistischem Transfermaterial in nahverwandten Sprachen, das als kognitives Potential den Erschließungsprozess optimiert und in kürzester Zeit ein Lese- und Hörverstehen in einer ganzen Sprachenfamilie erreichbar macht. ...
Der Begriff Eurocomprehension steht für Europäische Interkomprehension in den drei großen Sprachengruppen Europas, der romanischen, slawischen und germanischen. Es geht der Eurocomprehension darum, unter EU-konformen sprachpolitischen Zielsetzungen Mehrsprachigkeit über den Einstieg in rezeptive Kompetenzen modularisiert zu erreichen. Dabei liefert die linguistische Interkomprehensionsforschung die interlingualen Transferbasen zur kognitiven Nutzung von Verwandtschaftsbeziehungen in Sprachgruppen, die eine Mehrsprachigkeitsdidaktik umsetzt. ...
The crossbar-H-mode (CH) structure is the first superconducting multicell drift tube cavity for the low and medium energy range operated in the H21 mode. Because of the large energy gain per cavity, which leads to high real estate gradients, it is an excellent candidate for the efficient acceleration in high power proton and ion accelerators with fixed velocity profile. A prototype cavity has been developed and tested successfully with a gradient of 7MV/m. A few new superconducting CH cavities with improved geometries for different high power applications are under development at present. One cavity (f=325 MHz, β=0.16, seven cells) is currently under construction and studied with respect to a possible upgrade option for the GSI UNILAC. Another cavity (f=217 MHz, β=0.059, 15 cells) is designed for a cw operated energy variable heavy ion linac application. Furthermore, the EUROTRANS project (European research program for the transmutation of high level nuclear waste in an accelerator driven system, 600 MeV protons, 352 MHz) is one of many possible applications for this kind of superconducting rf cavity. In this context a layout of the 17 MeV EUROTRANS injector containing four superconducting CH cavities was proposed by the Institute for Applied Physics (IAP) Frankfurt. The status of the cavity development related to the EUROTRANS injector is presented.
EUROTRANS is a European research program for the transmutation of high level nuclear waste in an accelerator-driven system (ADS). As proposed, the driver linac needs to deliver a 2.5–4 mA, 600 MeV continuous-wave (CW) proton beam and later a 20 mA, 800 MeV one to the spallation target in the prototype-scale and industrial-scale demonstration phases, respectively. This paper is focusing on the conceptual studies performed with respect to the 17 MeV injector. First, the special beam dynamics strategies and methods, which have been developed and applied to design a current-variable injector up to 30 mA for allowing an easy upgrade without additional R&D costs, will be introduced. Then the error study made for evaluating the tolerance limits of the designed injector will be presented as well.
Accelerator Driven Systems (ADS) are promising tools for the efficient transmutation of nuclear waste products in dedicated industrial installations, called transmuters. The Myrrha project at Mol, Belgium, placed itself on the path towards these applications with a multipurpose and versatile system based on a liquid PbBi (LBE) cooled fast reactor (80 MWth) which may be operated in both critical and subcritical modes. In the latter case the core is fed by spallation neutrons obtained from a 600 MeV proton beam hitting the LBE coolant/target. The accelerator providing this beam is a high intensity CW superconducting linac which is laid out for the highest achievable reliability. The combination of a parallel redundant and of a fault tolerant scheme should allow obtaining an MTBF value in excess of 250 hours that is required for optimal integrity and successful operation of the ADS. Myrrha is expected to be operational in 2023. The forthcoming 4-year period is fully dedicated to R&D activities, and in the field of the accelerator they are strongly focused on the reliability aspects and on the proper shaping of the beam trip spectrum.
As the successor of the EUROTRANS project, the MAX project is aiming to continue the R&D effects for a European Accelerator-Driven System and to bring the conceptual design to reality. The layout of the driver linac for MAX will follow the reference design made for the XT-ADS phase of the EUROTRANS project. For the injector part, new design strategies and approaches, e.g. half resonant frequency, half transition-energy between the RFQ and the CH-DTL, and using the 4-rod RFQ structure instead of the originally proposed 4-vane RFQ, have been conceived and studied to reach a more reliable CW operation at reduced costs. In this paper, the design and simulation results of the MAX injector are presented.
The MYRRHA Project (Multi Purpose Hybrid Reactor for High Tech Applications) at Mol/belgium will be a user facility with emphasis on research with neutron generated by a spallation source. One main aspect is the demonstration of nuclear waste technology using an accelerator driven system. A superconducting linac delivers a 4 mA, 600 MeV proton beam. The first accelerating section is covered by the 17 MeV injector. It consists of a proton source, an RFQ, two room temperature CH cavities and 4 superconducting CH-cavities. The initial design has used an RF frequency of 352 MHz. Recently the frequency of the injector has been set to 176 MHz. The main reason is the possible use of a 4-rod-RFQ with reduced power dissipation and energy, respectively. The status of the overall injector layout including cavity design is presented.
MYRRHA is conceived as an accelerator driven system (ADS) for transmutation of high level nuclear waste. The neutron source is created by coupling a proton accelerator of 600 MeV with a 4 mA proton beam, a spallation source and a sub-critical core. The IAP of Frankfurt University is responsible for the development of the 17 MeV injector operated at 176 MHz. The injector consists of a 1.5 MeV 4-Rod-RFQ and six CH-drifttube-structures. The first two CH-structures will be operated at room temperature and the other CH-structures are superconducting cavities assembled in one cryo-module. To achieve the extremely high reliability required by the ADS application, the design of the 17 MeV injector has been intensively studied, with respect to thermal issues, minimum peak fields and field distribution.
We present results on transverse momentum (pT) and rapidity (y) differential production cross sections, mean transverse momentum and mean transverse momentum square of inclusive J/ψ and ψ(2S) at forward rapidity (2.5 < y < 4) as well as ψ(2S)-to-J/ψ cross section ratios. These quantities are measured in pp collisions at center of mass energies s√=5.02 and 13 TeV with the ALICE detector. Both charmonium states are reconstructed in the dimuon decay channel, using the muon spectrometer. A comprehensive comparison to inclusive charmonium cross sections measured at s√=2.76, 7 and 8 TeV is performed. A comparison to non-relativistic quantum chromodynamics and fixed-order next-to-leading logarithm calculations, which describe prompt and non-prompt charmonium production respectively, is also presented. A good description of the data is obtained over the full pT range, provided that both contributions are summed. In particular, it is found that for pT > 15 GeV/c the non-prompt contribution reaches up to 50% of the total charmonium yield.
Measurement of deuteron spectra and elliptic flow in Pb–Pb collisions at √sNN = 2.76 TeV at the LHC
(2017)
The transverse momentum (pT) spectra and elliptic flow coefficient (v2) of deuterons and anti-deuterons at mid-rapidity (|y|<0.5) are measured with the ALICE detector at the LHC in Pb–Pb collisions at sNN−−−√ = 2.76 TeV. The measurement of the pT spectra of (anti-)deuterons is done up to 8 GeV/c in 0–10% centrality class and up to 6 GeV/c in 10–20% and 20–40% centrality classes. The v2 is measured in the 0.8 < pT < 5 GeV/c interval and in six different centrality intervals (0–5, 5–10, 10–20, 20–30, 30–40 and 40–50%) using the scalar product technique. Measured π ±, K± and p+p¯¯¯ transverse-momentum spectra and v2 are used to predict the deuteron pT spectra and v2 within the Blast-Wave model. The predictions are able to reproduce the v2 coefficient in the measured pT range and the transverse-momentum spectra for pT > 1.8 GeV/c within the experimental uncertainties. The measurement of the coalescence parameter B2 is performed, showing a pT dependence in contrast with the simplest coalescence model, which fails to reproduce also the measured v2 coefficient. In addition, the coalescence parameter B2 and the elliptic flow coefficient in the 20–40% centrality interval are compared with the AMPT model which is able, in its version without string melting, to reproduce the measured v2(pT) and the B2(pT) trend.
The invariant differential cross sections for inclusive π0 and η mesons at midrapidity were measured in pp collisions at s√=2.76 TeV for transverse momenta 0.4<pT<40 GeV/c and 0.6<pT<20 GeV/c, respectively, using the ALICE detector. This large range in pT was achieved by combining various analysis techniques and different triggers involving the electromagnetic calorimeter (EMCal). In particular, a new single-cluster, shower-shape based method was developed for the identification of high-pT neutral pions, which exploits that the showers originating from their decay photons overlap in the EMCal. Above 4 GeV/c, the measured cross sections are found to exhibit a similar power-law behavior with an exponent of about 6.3. Next-to-leading-order perturbative QCD calculations differ from the measured cross sections by about 30% for the π0, and between 30–50% for the η meson, while generator-level simulations with PYTHIA 8.2 describe the data to better than 10–30%, except at pT<1 GeV/c. The new data can therefore be used to further improve the theoretical description of π0 and η meson production.
The measurement of azimuthal correlations of charged particles is presented for Pb-Pb collisions at sNN−−−√=2.76 TeV and p-Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector at the CERN Large Hadron Collider. These correlations are measured for the second, third and fourth order flow vector in the pseudorapidity region |η| < 0.8 as a function of centrality and transverse momentum p T using two observables, to search for evidence of p T-dependent flow vector fluctuations. For Pb-Pb collisions at 2.76 TeV, the measurements indicate that p T-dependent fluctuations are only present for the second order flow vector. Similar results have been found for p-Pb collisions at 5.02 TeV. These measurements are compared to hydrodynamic model calculations with event-by-event geometry fluctuations in the initial state to constrain the initial conditions and transport properties of the matter created in Pb–Pb and p–Pb collisions.
We present the charged-particle multiplicity distributions over a wide pseudorapidity range (−3.4<η<5.0) for pp collisions at s√=0.9,7, and 8 TeV at the LHC. Results are based on information from the Silicon Pixel Detector and the Forward Multiplicity Detector of ALICE, extending the pseudorapidity coverage of the earlier publications and the high-multiplicity reach. The measurements are compared to results from the CMS experiment and to PYTHIA, PHOJET and EPOS LHC event generators, as well as IP-Glasma calculations.
The transverse momentum distributions of the strange and double-strange hyperon resonances (Σ(1385)±,Ξ(1530)0) produced in p–Pb collisions at √sNN = 5.02 TeV were measured in the rapidity range −0.5<yCMS<0 for event classes corresponding to different charged-particle multiplicity densities, ⟨dNch/dηlab⟩. The mean transverse momentum values are presented as a function of ⟨dNch/dηlab⟩, as well as a function of the particle masses and compared with previous results on hyperon production. The integrated yield ratios of excited to ground-state hyperons are constant as a function of ⟨dNch/dηlab⟩. The equivalent ratios to pions exhibit an increase with ⟨dNch/dηlab⟩, depending on their strangeness content.
We present the charged-particle multiplicity distributions over a wide pseudorapidity range (−3.4<η<5.0) for pp collisions at s√= 0.9, 7, and 8 TeV at the LHC. Results are based on information from the Silicon Pixel Detector and the Forward Multiplicity Detector of ALICE, extending the pseudorapidity coverage of the earlier publications and the high-multiplicity reach. The measurements are compared to results from the CMS experiment and to PYTHIA, PHOJET and EPOS LHC event generators, as well as IP-Glasma calculations.