Refine
Year of publication
Document Type
- Preprint (517)
- Article (288)
- Conference Proceeding (12)
- Part of a Book (5)
- Report (3)
- Working Paper (1)
Has Fulltext
- yes (826)
Is part of the Bibliography
- no (826) (remove)
Keywords
- Heavy Ion Experiments (20)
- Hadron-Hadron scattering (experiments) (11)
- Hadron-Hadron Scattering (8)
- Heavy-ion collision (5)
- Collective Flow (4)
- Quark-Gluon Plasma (4)
- Europa (3)
- Hagen <2001> (3)
- Jets (3)
- Jets and Jet Substructure (3)
Institute
- Physik (812)
- Frankfurt Institute for Advanced Studies (FIAS) (723)
- Informatik (692)
- Neuere Philologien (10)
- Informatik und Mathematik (3)
- Geowissenschaften (2)
- Medizin (2)
- Hochschulrechenzentrum (1)
The production of the charm-strange baryon Ξc0 is measured for the first time at the LHC via its semileptonic decay into eΞ−+νe in pp collisions at s=7 TeV with the ALICE detector. The transverse momentum (pT) differential cross section multiplied by the branching ratio is presented in the interval 1<pT<8 GeV/c at mid-rapidity, |y|<0.5. The transverse momentum dependence of the Ξc0 baryon production relative to the D0 meson production is compared to predictions of event generators with various tunes of the hadronisation mechanism, which are found to underestimate the measured cross-section ratio.
We present the first measurements of femtoscopic correlations between the K0 S and K± particles in pp collisions at √s = 7 TeV measured by the ALICE experiment. The observed femtoscopic correlations are consistent with final-state interactions proceeding solely via the a0(980) resonance. The extracted kaon source radius and correlation strength parameters for K0 SK− are found to be equal within the experimental uncertainties to those for K0 SK+. Results of the present study are compared with those from identical-kaon femtoscopic studies also performed with pp collisions at √s = 7 TeV by ALICE andwith a K0 SK± measurement in Pb–Pb collisions at √sNN = 2.76 TeV. Combined with the Pb–Pb results, our pp analysis is found to be compatible with th e interpretation of the a0(980) having a tetraquark structure instead of that of a diquark.
Azimuthally-differential femtoscopic measurements, being sensitive to spatio-temporal characteristics of the source as well as to the collective velocity fields at freeze out, provide very important information on the nature and dynamics of the system evolution. While the HBT radii oscillations relative to the second harmonic event plane measured recently reflect mostly the spatial geometry of the source, model studies have shown that the HBT radii oscillations relative to the third harmonic event plane are predominantly defined by the velocity fields. In this Letter, we present the first results on azimuthally-differential pion femtoscopy relative to the third harmonic event plane as a function of the pion pair transverse momentum kT for different collision centralities in Pb–Pb collisions at √sNN = 2.76 TeV. We find that the Rside and Rout radii, which characterize the pion source size in the directions perpendicular and parallel to the pion transverse momentum, oscillate in phase relative to the third harmonic event plane, similar to the results from 3+1D hydrodynamical calculations. The observed radii oscillations unambiguously signal a collective expansion and anisotropy in the velocity fields. A comparison of the measured radii scillations with the Blast-Wave model calculations indicate that the initial state triangularity is washedout at freeze out.
The second and the third order anisotropic flow, V2 and V3, are mostly determined by the corresponding initial spatial anisotropy coefficients, ε2 and ε3, in the initial density distribution. In addition to their dependence on the same order initial anisotropy coefficient, higher order anisotropic flow, Vn (n > 3), can also have a significant contribution from lower order initial anisotropy coefficients, which leads to mode-coupling effects. In this Letter we investigate the linear and non-linear modes in higher order anisotropic flow Vn for n = 4, 5, 6 with the ALICE detector at the Large Hadron Collider. The measurements are done for particles in the pseudorapidity range |η| < 0.8 and the transverse momentum range 0.2 < pT < 5.0 GeV/c as a function of collision centrality. The results are compared with theoretical calculations and provide important constraints on the initial conditions, including initial spatial geometry and its fluctuations, as well as the ratio of the shear viscosity to entropy density of the produced system.
The first measurements of anisotropic flow coefficients vn for mid-rapidity charged particles in Xe–Xe collisions at √sNN = 5.44 TeV are presented. Comparing these measurements to those from Pb–Pb collisions at √sNN = 5.02 TeV, v2 is found to be suppressed for mid-central collisions at the same centrality, and enhanced for central collisions. The values of v3 are generally larger in Xe–Xe than in Pb–Pb at a given centrality. These observations are consistent with expectations from hydrodynamic predictions. When both v2 and v3 are divided by their corresponding eccentricities for a variety of initial state models, they generally scale with transverse density when comparing Xe–Xe and Pb–Pb, with some deviations observed in central Xe–Xe and Pb–Pb collisions. These results assist in placing strong constraints on both the initial state geometry and medium response for relativistic heavy-ion collisions.
We present a measurement of azimuthal correlations between inclusive J/ψ and charged hadrons in p–Pb collisions recorded with the ALICE detector at the CERN LHC. The J/ψ are reconstructed at forward (p-going, 2.03<y<3.53) and backward (Pb-going, −4.46<y<−2.96) rapidity via their μ+μ− decay channel, while the charged hadrons are reconstructed at mid-rapidity (|η|<1.8). The correlations are expressed in terms of associated charged-hadron yields per J/ψ trigger. A rapidity gap of at least 1.5 units is required between the trigger J/ψ and the associated charged hadrons. Possible correlations due to collective effects are assessed by subtracting the associated per-trigger yields in the low-multiplicity collisions from those in the high-multiplicity collisions. After the subtraction, we observe a strong indication of remaining symmetric structures at Δφ≈0 and Δφ≈π, similar to those previously found in two-particle correlations at middle and forward rapidity. The corresponding second-order Fourier coefficient (v2) in the transverse momentum interval between 3 and 6 GeV/c is found to be positive with a significance of about 5σ. The obtained results are similar to the J/ψ v2 coefficients measured in Pb–Pb collisions at sNN=5.02 TeV, suggesting a common mechanism at the origin of the J/ψ v2.
The measurement of the production of charm jets, identified by the presence of a D0 meson in the jet constituents, is presented in proton–proton collisions at centre-of-mass energies of √s = 5.02 and 13 TeV with the ALICE detector at the CERN LHC. The D0 mesons were reconstructed from their hadronic decay D0 → K−π+ and the respective charge conjugate. Jets were reconstructed from D0-meson candidates and charged particles using the anti-kT algorithm, in the jet transverse momentum range 5 < pT,chjet < 50 GeV/c, pseudorapidity |ηjet| < 0.9 − R, and with the jet resolution parameters R = 0.2, 0.4, 0.6. The distribution of the jet momentum fraction carried by a D0 meson along the jet axis (z ch) was measured in the range 0.4 < z ch < 1.0 in four ranges of the jet transverse momentum. Comparisons of results for different collision energies and jet resolution parameters are also presented. The measurements are compared to predictions from Monte Carlo event generators based on leading-order and next-to-leading-order perturbative quantum chromodynamics calculations. A generally good description of the main features of the data is obtained in spite of a few discrepancies at low pT,chjet. Measurements were also done for R = 0.3 at √s = 5.02 and are shown along with their comparisons to theoretical predictions in an appendix to this paper.
Hadronic resonances are used to probe the hadron gas produced in the late stage of heavy-ion collisions since they decay on the same timescale, of the order of 1 to 10 fm/c, as the decoupling time of the system. In the hadron gas, (pseudo)elastic scatterings among the products of resonances that decayed before the kinetic freeze-out and regeneration processes counteract each other, the net effect depending on the resonance lifetime, the duration of the hadronic phase, and the hadronic cross sections at play. In this context, the Σ(1385)± particle is of particular interest as models predict that regeneration dominates over rescattering despite its relatively short lifetime of about 5.5 fm/c. The first measurement of the Σ(1385)± resonance production at midrapidity in Pb-Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector is presented in this Letter. The resonances are reconstructed via their hadronic decay channel, Λπ, as a function of the transverse momentum (pT) and the collision centrality. The results are discussed in comparison with the measured yield of pions and with expectations from the statistical hadronization model as well as commonly employed event generators, including PYTHIA8/Angantyr and EPOS3 coupled to the UrQMD hadronic cascade afterburner. None of the models can describe the data. For Σ(1385)±, a similar behaviour as K∗(892)0 is observed in data unlike the predictions of EPOS3 with afterburner.
An excess of J/ψ yield at very low transverse momentum (pT<0.3 GeV/c), originating from coherent photoproduction, is observed in peripheral and semicentral hadronic Pb–Pb collisions at a center-of-mass energy per nucleon pair of sNN=5.02 TeV. The measurement is performed with the ALICE detector via the dimuon decay channel at forward rapidity (2.5<y<4). The nuclear modification factor at very low pT and the coherent photoproduction cross section are measured as a function of centrality down to the 10% most central collisions. These results extend the previous study at sNN=2.76 TeV, confirming the clear excess over hadronic production in the pT range 0−0.3 GeV/c and the centrality range 70–90%, and establishing an excess with a significance greater than 5σ also in the 50–70% and 30–50% centrality ranges. The results are compared with earlier measurements at sNN=2.76 TeV and with different theoretical predictions aiming at describing how coherent photoproduction occurs in hadronic interactions with nuclear overlap.
An excess of J/ψ yield at very low transverse momentum (pT<0.3 GeV/c), originating from coherent photoproduction, is observed in peripheral and semicentral hadronic Pb−Pb collisions at a center-of-mass energy per nucleon pair of sNN−−−√=5.02 TeV. The measurement is performed with the ALICE detector via the dimuon decay channel at forward rapidity (2.5<y<4). The nuclear modification factor at very low pT and the coherent photoproduction cross section are measured as a function of centrality down to the 10% most central collisions. These results extend the previous study at sNN−−−√=2.76 TeV, confirming the clear excess over hadronic production in the pT range 0−0.3 GeV/c and the centrality range 70−90%, and establishing an excess with a significance greater than 5σ also in the 50−70% and 30−50% centrality ranges. The results are compared with earlier measurements at sNN−−−√=2.76 TeV and with different theoretical predictions aiming at describing how coherent photoproduction occurs in hadronic interactions with nuclear overlap.
Measurement of anti-3He nuclei absorption in matter and impact on their propagation in the Galaxy
(2022)
In our Galaxy, light antinuclei composed of antiprotons and antineutrons can be produced through high-energy cosmic-ray collisions with the interstellar medium or could also originate from the annihilation of dark-matter particles that have not yet been discovered. On Earth, the only way to produce and study antinuclei with high precision is to create them at high-energy particle accelerators. Although the properties of elementary antiparticles have been studied in detail, the knowledge of the interaction of light antinuclei with matter is limited. We determine the disappearance probability of 3He when it encounters matter particles and annihilates or disintegrates within the ALICE detector at the Large Hadron Collider. We extract the inelastic interaction cross section, which is then used as an input to the calculations of the transparency of our Galaxy to the propagation of 3He stemming from dark-matter annihilation and cosmic-ray interactions within the interstellar medium. For a specifc dark-matter profle, we estimate a transparency of about 50%, whereas it varies with increasing 3He momentum from 25% to 90% for cosmic-ray sources. The results indicate that 3He nuclei can travel long distances in the Galaxy, and can be used to study cosmic-ray interactions and dark-matter annihilation.
Understanding the production mechanism of light (anti)nuclei is one of the key challenges of nuclear physics and has important consequences for astrophysics, since it provides an input for indirect dark-matter searches in space. In this paper, the latest results about the production of light (anti)nuclei in pp collisions at s√=13 TeV are presented, focusing on the comparison with the predictions of coalescence and thermal models. For the first time, the coalescence parameters B2 for deuterons and B3 for helions are compared with parameter-free theoretical predictions that are directly constrained by the femtoscopic measurement of the source radius in the same event class. A fair description of the data with a Gaussian wave function is observed for both deuteron and helion, supporting the coalescence mechanism for the production of light (anti)nuclei in pp collisions. This method paves the way for future investigations of the internal structure of more complex nuclear clusters, including the hypertriton.
W±-boson production in p–Pb collisions at √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV
(2023)
The production of the W± bosons measured in p−Pb collisions at a centre-of-mass energy per nucleon−nucleon collision sNN−−−−√=8.16 TeV and Pb−Pb collisions at √sNN=5.02 TeV with ALICE at the LHC is presented. The W± bosons are measured via their muonic decay channel, with the muon reconstructed in the pseudorapidity region −4<ημlab<−2.5 with transverse momentum pμT>10 GeV/c. While in Pb−Pb collisions the measurements are performed in the forward (2.5<yμcms<4) rapidity region, in p−Pb collisions, where the centre-of-mass frame is boosted with respect to the laboratory frame, the measurements are performed in the backward (−4.46<yμcms<−2.96) and forward (2.03<yμcms<3.53) rapidity regions. The W− and W+ production cross sections, lepton-charge asymmetry, and nuclear modification factors are evaluated as a function of the muon rapidity. In order to study the production as a function of the p−Pb collision centrality, the production cross sections of the W− and W+ bosons are combined and normalised to the average number of binary nucleon−nucleon collision ⟨Ncoll⟩. In Pb−Pb collisions, the same measurements are presented as a function of the collision centrality. Study of the binary scaling of the W±-boson cross sections in p−Pb and Pb−Pb collisions is also reported. The results are compared with perturbative QCD (pQCD) calculations, with and without nuclear modifications of the Parton Distribution Functions (PDFs), as well as with available data at the LHC. Significant deviations from the theory expectations are found in the two collision systems, indicating that the measurements can provide additional constraints for the determination of nuclear PDF (nPDFs) and in particular of the light-quark distributions.
In our Galaxy, light antinuclei composed of antiprotons and antineutrons can be produced through high-energy cosmic-ray collisions with the interstellar medium or could also originate from the annihilation of dark-matter particles that have not yet been discovered. On Earth, the only way to produce and study antinuclei with high precision is to create them at high-energy particle accelerators. Although the properties of elementary antiparticles have been studied in detail, the knowledge of the interaction of light antinuclei with matter is limited. We determine the disappearance probability of 3He¯¯¯¯¯¯ when it encounters matter particles and annihilates or disintegrates within the ALICE detector at the Large Hadron Collider. We extract the inelastic interaction cross section, which is then used as input to calculations of the transparency of our Galaxy to the propagation of 3He¯¯¯¯¯¯ stemming from dark-matter annihilation and cosmic-ray interactions within the interstellar medium. For a specific dark-matter profile, we estimate a transparency of about 50%, whereas it varies with increasing 3He¯¯¯¯¯¯ momentum from 25% to 90% for cosmic-ray sources. The results indicate that 3He¯¯¯¯¯¯ nuclei can travel long distances in the Galaxy, and can be used to study cosmic-ray interactions and dark-matter annihilation.
Antimatter particles such as positrons and antiprotons abound in the cosmos. Much less common are light antinuclei, composed of antiprotons and antineutrons, which can be produced in our galaxy via high-energy cosmic-ray collisions with the interstellar medium or could also originate from the annihilation of the still undiscovered dark-matter particles. On Earth, the only way to produce and study antinuclei with high precision is to create them at high-energy particle accelerators like the Large Hadron Collider (LHC). Though the properties of elementary antiparticles have been studied in detail, knowledge of the interaction of light antinuclei with matter is rather limited. This work focuses on the determination of the disappearance probability of \ahe\ when it encounters matter particles and annihilates or disintegrates. The material of the ALICE detector at the LHC serves as a target to extract the inelastic cross section for \ahe\ in the momentum range of 1.17≤p<10 GeV/c. This inelastic cross section is measured for the first time and is used as an essential input to calculations of the transparency of our galaxy to the propagation of 3He¯¯¯¯¯¯ stemming from dark-matter decays and cosmic-ray interactions within the interstellar medium. A transparency of about 50% is estimated using the GALPROP program for a specific dark-matter profile and a standard set of propagation parameters. For cosmic-ray sources, the obtained transparency with the same propagation scheme varies with increasing 3He¯¯¯¯¯¯ momentum from 25% to 90%. The absolute uncertainties associated to the 3He¯¯¯¯¯¯ inelastic cross section measurements are of the order of 10%−15%. The reported results indicate that 3He¯¯¯¯¯¯ nuclei can travel long distances in the galaxy, and can be used to study cosmic-ray interactions and dark-matter decays.
The ALICE Collaboration reports the first fully-corrected measurements of the N-subjettiness observable for track-based jets in heavy-ion collisions. This study is performed using data recorded in pp and Pb−Pb collisions at centre-of-mass energies of √s=7 TeV and √sNN=2.76\,TeV, respectively. In particular the ratio of 2-subjettiness to 1-subjettiness, τ2/τ1, which is sensitive to the rate of two-pronged jet substructure, is presented. Energy loss of jets traversing the strongly interacting medium in heavy-ion collisions is expected to change the rate of two-pronged substructure relative to vacuum. The results are presented for jets with a resolution parameter of R=0.4 and charged jet transverse momentum of 40≤pT,jet≤60 GeV/c, which constitute a larger jet resolution and lower jet transverse momentum interval than previous measurements in heavy-ion collisions. This has been achieved by utilising a semi-inclusive hadron-jet coincidence technique to suppress the larger jet combinatorial background in this kinematic region. No significant modification of the τ2/τ1 observable for track-based jets in Pb--Pb collisions is observed relative to vacuum PYTHIA6 and PYTHIA8 references at the same collision energy. The measurements of τ2/τ1, together with the splitting aperture angle ΔR, are also performed in pp collisions at √s=7 TeV for inclusive jets. These results are compared with PYTHIA calculations at √s=7 TeV, in order to validate the model as a vacuum reference for the Pb−Pb centre-of-mass energy. The PYTHIA references for τ2/τ1 are shifted to larger values compared to the measurement in pp collisions. This hints at a reduction in the rate of two-pronged jets in Pb--Pb collisions compared to pp collisions.
The pT-differential production cross sections of prompt and non-prompt (produced in beauty-hadron decays) D mesons were measured by the ALICE experiment at midrapidity (|y|<0.5) in proton--proton collisions at s√=5.02 TeV. The data sample used in the analysis corresponds to an integrated luminosity of (19.3±0.4) nb−1. D mesons were reconstructed from their decays D0→K−π+, D+→K−π+π+, and D+s→ϕπ+→K−K+π+ and their charge conjugates. Compared to previous measurements in the same rapidity region, the cross sections of prompt D+ and D+s mesons have an extended pT coverage and total uncertainties reduced by a factor ranging from 1.05 to 1.6, depending on pT, allowing for a more precise determination of their pT-integrated cross sections. The results are well described by perturbative QCD calculations. The fragmentation fraction of heavy quarks to strange mesons divided by the one to non-strange mesons, fs/(fu+fd), is compatible for charm and beauty quarks and with previous measurements at different centre-of-mass energies and collision systems. The bb¯¯¯ production cross section per rapidity unit at midrapidity, estimated from non-prompt D-meson measurements, is dσbb¯¯¯/dy||y|<0.5=34.5±2.4(stat.)+4.7−2.9(tot.syst.) μb. It is compatible with previous measurements at the same centre-of-mass energy and with the cross section predicted by perturbative QCD calculations.
The pT-differential production cross sections of prompt and non-prompt (produced in beauty-hadron decays) D mesons were measured by the ALICE experiment at midrapidity (|y|<0.5) in proton--proton collisions at s√=5.02 TeV. The data sample used in the analysis corresponds to an integrated luminosity of (19.3±0.4) nb−1. D mesons were reconstructed from their decays D0→K−π+, D+→K−π+π+, and D+s→ϕπ+→K−K+π+ and their charge conjugates. Compared to previous measurements in the same rapidity region, the cross sections of prompt D+ and D+s mesons have an extended pT coverage and total uncertainties reduced by a factor ranging from 1.05 to 1.6, depending on pT, allowing for a more precise determination of their pT-integrated cross sections. The results are well described by perturbative QCD calculations. The fragmentation fraction of heavy quarks to strange mesons divided by the one to non-strange mesons, fs/(fu+fd), is compatible for charm and beauty quarks and with previous measurements at different centre-of-mass energies and collision systems. The bb¯¯¯ production cross section per rapidity unit at midrapidity, estimated from non-prompt D-meson measurements, is dσbb¯¯¯/dy||y|<0.5=34.5±2.4(stat.)+4.7−2.9(tot.syst.) μb. It is compatible with previous measurements at the same centre-of-mass energy and with the cross section predicted by perturbative QCD calculations.
W±-boson production in p–Pb collisions at √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV
(2023)
The production of the W± bosons measured in p–Pb collisions at a centreof-mass energy per nucleon–nucleon collision √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV with ALICE at the LHC is presented. The W± bosons are measured via their muonic decay channel, with the muon reconstructed in the pseudorapidity region −4 < ηµ lab < −2.5 with transverse momentum p µ T > 10 GeV/c. While in Pb–Pb collisions the measurements are performed in the forward (2.5 < yµ cms < 4) rapidity region, in p–Pb collisions, where the centre-of-mass frame is boosted with respect to the laboratory frame, the measurements are performed in the backward (−4.46 < yµ cms < −2.96) and forward (2.03 < yµ cms < 3.53) rapidity regions. The W− and W+ production cross sections, leptoncharge asymmetry, and nuclear modification factors are evaluated as a function of the muon rapidity. In order to study the production as a function of the p–Pb collision centrality, the production cross sections of the W− and W+ bosons are combined and normalised to the average number of binary nucleon–nucleon collision hNcolli. In Pb–Pb collisions, the same measurements are presented as a function of the collision centrality. Study of the binary scaling of the W±-boson cross sections in p–Pb and Pb–Pb collisions is also reported. The results are compared with perturbative QCD calculations, with and without nuclear modifications of the Parton Distribution Functions (PDFs), as well as with available data at the LHC. Significant deviations from the theory expectations are found in the two collision systems, indicating that the measurements can provide additional constraints for the determination of nuclear PDFs and in particular of the light-quark distributions.
Introduction: The German PID-NET registry was founded in 2009, serving as the first national registry of patients with primary immunodeficiencies (PID) in Germany. It is part of the European Society for Immunodeficiencies (ESID) registry. The primary purpose of the registry is to gather data on the epidemiology, diagnostic delay, diagnosis, and treatment of PIDs.
Methods: Clinical and laboratory data was collected from 2,453 patients from 36 German PID centres in an online registry. Data was analysed with the software Stata® and Excel.
Results: The minimum prevalence of PID in Germany is 2.72 per 100,000 inhabitants. Among patients aged 1–25, there was a clear predominance of males. The median age of living patients ranged between 7 and 40 years, depending on the respective PID. Predominantly antibody disorders were the most prevalent group with 57% of all 2,453 PID patients (including 728 CVID patients). A gene defect was identified in 36% of patients. Familial cases were observed in 21% of patients. The age of onset for presenting symptoms ranged from birth to late adulthood (range 0–88 years). Presenting symptoms comprised infections (74%) and immune dysregulation (22%). Ninety-three patients were diagnosed without prior clinical symptoms. Regarding the general and clinical diagnostic delay, no PID had undergone a slight decrease within the last decade. However, both, SCID and hyper IgE- syndrome showed a substantial improvement in shortening the time between onset of symptoms and genetic diagnosis. Regarding treatment, 49% of all patients received immunoglobulin G (IgG) substitution (70%—subcutaneous; 29%—intravenous; 1%—unknown). Three-hundred patients underwent at least one hematopoietic stem cell transplantation (HSCT). Five patients had gene therapy.
Conclusion: The German PID-NET registry is a precious tool for physicians, researchers, the pharmaceutical industry, politicians, and ultimately the patients, for whom the outcomes will eventually lead to a more timely diagnosis and better treatment.
To fulfil the requirements of ESS on beam transmission and emittance growth a detailed knowledge of the physics of beam formation as well as the interaction of the H- with the residual gas is substantial. Space charge compensated beam transport using solenoids for ion optics is in favour for the Low Energy Beam Transport (LEBT) between ion source and the first RFQ. Space charge compensation reduces the electrical self fields and beam radii and therefore emittance growth due to aberrations and redistribution. Transport of H- near the ion source is negatively influenced by the dipole fields required for beam extraction and e--dumping and the high gas pressure. The destruction of the rotational symmetry together with the space charge forces causes emittance growth and particle losses within the extraction system. High residual gas pressure near the extractor together with the high cross section for stripping will influence the transmission as well as space charge compensation. Therefore a detailed knowledge of the interaction of the residual gas with the beam and the influence of the external fields on the distribution of the compensation particles is necessary to reduce particle losses and emittance growth. Preliminary experiments using positive hydrogen ions for reference already show the influence of dipole fields on beam emittance. First measurements with H- confirm these results. Additional information on the interactions of the residual gas with the beam ions have been gained from the measurements using the momentum and energy analyser.
Investigation of the focus shift due to compensation process for low energy ion beam transport
(2000)
In magnetic Low Energy Beam Transport (LEBT) sections space charge compensation helps to enhance the transportable beam current and to reduce emittance growth due to space charge forces. For pulsed beams the time neccesary to establish space charge compensation is of great interest for beam transport. Particularly with regard to beam injection into the first accelerator section (e.g. RFQ) investigation of effects on shift of the beam focus due to space charge compensation are very important. The achieved results helps to obviate a mismatch into the first RFQ. To investigate the space charge compensation due to residual gas ionization, time resolved measurements using pulsed ion beams were performed at the LEBT system at the IAP and at the CEA-Saclay injektion line. A residual gas ion energy analyser (RGIA) equiped with a channeltron was used to measure the potential destribution as a function of time to estimate the rise time of compensation. For time resolved measurements (delta t min=50ns) of the radial density profile of the ion beam a CCD-camera was applied. The measured data were used in a numerical simulation of selfconsistant eqilibrium states of the beam plasma [1] to determine plasma parameters such as the density, the temperature, the kinetic and potential energy of the compensation electrons as a function of time. Measurements were done using focused proton beams (10keV, 2mA at IAP and 92keV, 62mA at CEA-Saclay) to get a better understanding of the influence of the compensation process. An interpretation of the acquired data and the achieved results will be presented.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
High perveance negative ion beams with low emittance are essential for several next generation particle accelerators (i. g. spallation sources like ESS [1] and SNS [2]). The extraction and transport of these beams have intrinsic difficulties different from positive ion beams. Limitation of beam current and emittance growth have to be avoided. To fulfill the requirements of those projects a detailed knowledge of the physics of beam formation the interaction of the H- with the residual gas and transport is substantial. A compact cesium free H- volume source delivering a low energy high perveance beam (6.5 keV, 2.3 mA, perveance K= 0.0034) has been built to study the fundamental physics of beam transport and will be integrated into the existing LEBT section in the near future. First measurements of the interaction between the ion beam and the residual gas will be presented together with the experimental set up and preliminary results.
The knowledge of the build up time of space charge compensation (SCC) and the investigation of the compensation process is of main interest for low energy beam transport of pulsed high perveance ion beams under space charge compensated conditions. To investigate experimentally the rise of compensation an LEBT system consisting of a pulsed ion source, two solenoids and a drift tube as diagnostic section has been set up. The beam potential has been measured time resolved by a residual gas ion energy analyser (RGA). A numerical simulation for the calculation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult measure directly. The results of the simulation has been compared with the measured data to investigate the behavior of the compensation electrons as a function of time. The acquired data shows that the theoretical rise time of space charge compensation is by a factor of two shorter than the build up time determined experimentally. In view of description the process of SCC an interpretation of the gained results is given.
The determination of the beam emittance using conventional destructive methods suffers from two main disadvantages. The interaction between the ion beam and the measurement device produces a high amount of secondary particles. Those particles interact with the beam and can change the transport properties of the accelerator. Particularly in the low energy section of high current accelerators like proposed for IFMIF, heavy ion inertial fusion devices (HIDIF) and spallation sources (ESS, SNS) the power deposited on the emittance measurement device can lead to extensive heat on the detector itself and can destruct or at least dejust the device (slit or grit for example). CCD camera measurements of the incident light emitted from interaction of beam ions with residual gas are commonly used for determination of the beam emittance. Fast data acquisition and high time resolution are additional features of such a method. Therefore a matrix formalism is used to derive the emittance from the measured profile of the beam [1,2] which does not take space charge effects and emittance growth into account. A new method to derive the phase space distribution of the beam from a single CCD camera image using statistical numerical methods will be presented together with measurements. The results will be compared with measurements gained from a conventional Allison type (slit-slit) emittance measurement device.
For investigation of space charge compensation process due to residual gas ionization and the experimentally study of the rise of compensation, a Low Energy Beam Transport (LEBT) system consisting of an ion source, two solenoids, a decompensation electrode to generate a pulsed decompensated ion beam and a diagnostic section was set up. The potentials at the beam axis and the beam edge were ascertained from time resolved measurements by a residual gas ion energy analyzer. A numerical simulation of self-consistent equilibrium states of the beam plasma has been developed to determine plasma parameters which are difficult to measure directly. The temporal development of the kinetic and potential energy of the compensation electrons has been analyzed by using the numerically gained results of the simulation. To investigate the compensation process the distribution and the losses of the compensation electrons were studied as a function of time. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. To describe the process of space charge compensation an interpretation of the achieved results is given.
A LEBT system consisting of an ion source, two solenoids, and a diagnostic section has been set up to investigate the space charge compensation process due to residual gas ionization [1] and to study experimentally the rise of compensation. To gain the radial beam potential distribution time resolved measurements of the residual gas ion energy distribution were carried out using a Hughes Rojanski analyzer [2,3]. To measure the radial density profile of the ion beam a CCD-camera performed time resolved measurements, which allow an estimation the rise time of compensation. Further the dynamic effect of the space charge compensation on the beam transport was shown. A numerical simulation under assumption of selfconsistent states [4] of the beam plasma has been used to determine plasma parameters such as the radial density profile and the temperature of the electrons. The acquired data show that the theoretical estimated rise time of space charge compensation neglecting electron losses is shorter than the build up time determined experimentally. An interpretation of the achieved results is given.
Influence of space charge fluctuations on the low energy beam transport of high current ion beams
(2000)
For future high current ion accelerators like SNS, ESS or IFMIF the beam behaviour in low energy beam transport sections is dominated by space charge forces. Therefore space charge fluctuations (e. g. source noise) can drastically influence the beam transport properties of the low energy beam transport section. Losses of beam ions and emittance growth are the most severe problems. For electrostatic transport systems either a LEBT design has to be found which is insensitive to variations of the space charge or the origin of the fluctuations has to be eliminated. For space charge compensated transport as proposed for ESS and IFMIF the situation is different: No major influence on beam transport is expected for fluctuations below a cut-off frequency given by the production rate of the compensation particles. Above this frequency the fluctuations can not be compensated by particle production alone, but redistributions of the compensation particles helps to compensate the influence of the fluctuations. Above a second cut-off frequency given by the density and the temperature of the compensation particles their redistribution is too slow to reduce the influence of the space charge fluctuations. Transport simulations for the IFMIF injector including space charge fluctuations will be presented together with a determination of the cut-off frequencies. The results will be compared with measurements of the rise time of space charge compensation.
Accelerator Driven Systems (ADS) are promising tools for the efficient transmutation of nuclear waste products in dedicated industrial installations, called transmuters. The Myrrha project at Mol, Belgium, placed itself on the path towards these applications with a multipurpose and versatile system based on a liquid PbBi (LBE) cooled fast reactor (80 MWth) which may be operated in both critical and subcritical modes. In the latter case the core is fed by spallation neutrons obtained from a 600 MeV proton beam hitting the LBE coolant/target. The accelerator providing this beam is a high intensity CW superconducting linac which is laid out for the highest achievable reliability. The combination of a parallel redundant and of a fault tolerant scheme should allow obtaining an MTBF value in excess of 250 hours that is required for optimal integrity and successful operation of the ADS. Myrrha is expected to be operational in 2023. The forthcoming 4-year period is fully dedicated to R&D activities, and in the field of the accelerator they are strongly focused on the reliability aspects and on the proper shaping of the beam trip spectrum.
The crossbar-H-mode (CH) structure is the first superconducting multicell drift tube cavity for the low and medium energy range operated in the H21 mode. Because of the large energy gain per cavity, which leads to high real estate gradients, it is an excellent candidate for the efficient acceleration in high power proton and ion accelerators with fixed velocity profile. A prototype cavity has been developed and tested successfully with a gradient of 7MV/m. A few new superconducting CH cavities with improved geometries for different high power applications are under development at present. One cavity (f=325 MHz, β=0.16, seven cells) is currently under construction and studied with respect to a possible upgrade option for the GSI UNILAC. Another cavity (f=217 MHz, β=0.059, 15 cells) is designed for a cw operated energy variable heavy ion linac application. Furthermore, the EUROTRANS project (European research program for the transmutation of high level nuclear waste in an accelerator driven system, 600 MeV protons, 352 MHz) is one of many possible applications for this kind of superconducting rf cavity. In this context a layout of the 17 MeV EUROTRANS injector containing four superconducting CH cavities was proposed by the Institute for Applied Physics (IAP) Frankfurt. The status of the cavity development related to the EUROTRANS injector is presented.
As the successor of the EUROTRANS project, the MAX project is aiming to continue the R&D effects for a European Accelerator-Driven System and to bring the conceptual design to reality. The layout of the driver linac for MAX will follow the reference design made for the XT-ADS phase of the EUROTRANS project. For the injector part, new design strategies and approaches, e.g. half resonant frequency, half transition-energy between the RFQ and the CH-DTL, and using the 4-rod RFQ structure instead of the originally proposed 4-vane RFQ, have been conceived and studied to reach a more reliable CW operation at reduced costs. In this paper, the design and simulation results of the MAX injector are presented.
The MYRRHA Project (Multi Purpose Hybrid Reactor for High Tech Applications) at Mol/belgium will be a user facility with emphasis on research with neutron generated by a spallation source. One main aspect is the demonstration of nuclear waste technology using an accelerator driven system. A superconducting linac delivers a 4 mA, 600 MeV proton beam. The first accelerating section is covered by the 17 MeV injector. It consists of a proton source, an RFQ, two room temperature CH cavities and 4 superconducting CH-cavities. The initial design has used an RF frequency of 352 MHz. Recently the frequency of the injector has been set to 176 MHz. The main reason is the possible use of a 4-rod-RFQ with reduced power dissipation and energy, respectively. The status of the overall injector layout including cavity design is presented.
EUROTRANS is a European research program for the transmutation of high level nuclear waste in an accelerator-driven system (ADS). As proposed, the driver linac needs to deliver a 2.5–4 mA, 600 MeV continuous-wave (CW) proton beam and later a 20 mA, 800 MeV one to the spallation target in the prototype-scale and industrial-scale demonstration phases, respectively. This paper is focusing on the conceptual studies performed with respect to the 17 MeV injector. First, the special beam dynamics strategies and methods, which have been developed and applied to design a current-variable injector up to 30 mA for allowing an easy upgrade without additional R&D costs, will be introduced. Then the error study made for evaluating the tolerance limits of the designed injector will be presented as well.
MYRRHA is conceived as an accelerator driven system (ADS) for transmutation of high level nuclear waste. The neutron source is created by coupling a proton accelerator of 600 MeV with a 4 mA proton beam, a spallation source and a sub-critical core. The IAP of Frankfurt University is responsible for the development of the 17 MeV injector operated at 176 MHz. The injector consists of a 1.5 MeV 4-Rod-RFQ and six CH-drifttube-structures. The first two CH-structures will be operated at room temperature and the other CH-structures are superconducting cavities assembled in one cryo-module. To achieve the extremely high reliability required by the ADS application, the design of the 17 MeV injector has been intensively studied, with respect to thermal issues, minimum peak fields and field distribution.
Metasomatic reaction zones between mafic and ultramafic rocks exhumed from subduction zones provide a window into mass-transfer processes at high pressure. However, accurate interpretation of the rock record requires distinguishing high-pressure metasomatic processes from inherited oceanic signatures prior to subduction. We integrated constraints from bulk-rock geochemical compositions and petrophysical properties, mineral chemistry, and thermodynamic modeling to understand the formation of reaction zones between juxtaposed metagabbro and serpentinite as exemplified by the Voltri Massif (Ligurian Alps, Italy). Distinct zones of variably metasomatized metagabbro are dominated by chlorite, amphibole, clinopyroxene, epidote, rutile, ilmenite, and titanite between serpentinite and eclogitic metagabbro. Whereas the precursor serpentinite and oxide gabbro formed and were likely already in contact in an oceanic setting, the reaction zones formed by diffusional Mg-metasomatism between the two rocks from prograde to peak, to retrograde conditions in a subduction zone. Metasomatism of mafic rocks by Mg-rich fluids that previously equilibrated with serpentinite could be widespread along the subduction interface, within the subducted slab, and the mantle wedge. Furthermore, the models predict that talc formation by Si-metasomatism of serpentinite in subduction zones is limited by pressure-dependent increase in the silica activity buffered by the serpentine-talc equilibrium. Elevated activities of aqueous Ca and Al species would also favor the formation of chlorite and garnet. Accordingly, unusual conditions or processes would be required to stabilize abundant talc at high P-T conditions. Alternatively, a different set of mineral assemblages, such as serpentine- or chlorite-rich rocks, may be controlling the coupling-decoupling transition of the plate interface.
Talc formation via silica-metasomatism of ultramafic rocks is believed to play key roles in subduction zone processes. Yet, the conditions of talc formation remain poorly constrained. We used thermodynamic reaction-path models to assess the formation of talc at the slab-mantle interface and show that it is restricted to a limited set of pressure–temperature conditions, protolith, and fluid compositions. In contrast, our models predict that chlorite formation is ubiquitous at conditions relevant to the slab-mantle interface of subduction zones. The scarcity of talc and abundance of chlorite is evident in the rock record of exhumed subduction zone terranes. Talc formation during Si-metasomatism may thus play a more limited role in volatile cycling, strain localization, and in controlling the decoupling-coupling transition of the plate interface. Conversely, the observed and predicted ubiquity of chlorite corroborates its prominent role in slab-mantle interface processes that previous studies attributed to talc.
Key Points:
Limited talc formation by Si-metasomatism of ultramafic rocks in subduction zones
Chlorite formation is likely pervasive at the slab-mantle interface
Preferential formation of chlorite has wide-ranging chemical and physical implications for subduction zone processes
Plain Language Summary: In subduction zones, talc can form during chemical reactions of mantle rocks with silica-enriched fluids at the interface between descending oceanic plates and the overriding mantle. Its formation and distribution in subduction zones are believed to affect the volatile budget, rheological properties, and the down-dip limit of the decoupling of the slab-mantle interface. Therefore, illuminating the conditions that facilitate talc formation at high pressure-temperature conditions is key in assessing its roles in fundamental subduction zone processes. Using thermodynamic reaction-path models, we show that the formation of talc at the slab-mantle interface is restricted to a limited set of environmental conditions, because its formation is highly sensitive to the compositions of the mantle rocks and reactant fluids. Contrary to common belief, talc is unlikely to form in high abundance in ultramafic rocks metasomatized by Si-rich slab-derived fluids. Rather, our models predict the ubiquitous formation of chlorite along with other silicate minerals during Si-metasomatism due to the competing effects from other dissolved components that favor their formation over talc. This study calls into question the importance of talc during Si-metasomatism in subduction zones but highlights the more predominant role of chlorite.
Le concept d’eurocompréhension signifie intercompréhension dans les trois grands groupes linguistiques européens, à savoir les langues romanes, slaves et germaniques. Il s’agit, en respectant les objectifs1 de la politique linguistique de l’Union Européenne, de parvenir de façon modulaire au plurilinguisme par le biais de compétences réceptives. Dans ce cadre, les recherches linguistiques effectuées sur l’intercompréhension fournissent les bases de transfert interlangues pour l’exploitation cognitive de la parenté entre les langues des groupes différents. ...
A new method of measuring quality factors in cavities is presented. This method is well suited to measure quality factors in undamped cavities as well as in heavily damped cavities, and in addition this method provides a possibility of separating modes and measuring quality factors especially in cases of overlapping modes. Measurements have been carried out on HOM-damped cavities for the DESY/THD linear collider project. Results are presented.
Plus de la moitié des Européens de l’U.E. parlent une langue romane comme langue maternelle. Parmi les autres Européens, l’apprentissage de langues romanes comme langue étrangère est très fréquent, il n’est dépassé que par l’anglais: Une «Romanophonie» pourrait s’appuyer donc sur une base large, tandis que ses valeurs intercompréhensives ne sont pas encore suffisamment mises à la disposition d’un publique européen. Au contraire: les nations créent de plus en plus des barrières entre les langues romanes en institutionnalisant les différences et non pas ce qu’elles ont en commun. En Allemagne où l’on trouve encore la philologie romane (Romanische Philologie) comme unité d’études on peut observer en même temps une tendance vers une spécialisation en études unilingues (Einzelphilologien). Un tel séparatisme linguistique à l’intérieur d’une seule famille renonce aux avantages intercommunicatifs et intercompréhensifs offerts par les langues romanes. Le phénomène de l’intercompréhension est largement connu, pas seulement parmi les romanistes. C’est le résultat d’une tradition de l’écrit et d’un héritage culturel - une partie importante de l’unité intellectuelle du continent européen - qui rend les langues romanes si accessibles. ...
Determination of field strength and quality factor of heavily HOM damped accelerator cavities
(1992)
Two methods of of measuring field strength in accelerator cavities, heavily damped with respect to higher order modes (HOM), are presented. From the results of the field measurements the coupling (damping) factor and thus the quality factor of the damped resonator can be derived. Measurements of a pillbox resonator with heavily damped TM110-mode (Q < 20) demonstrate the usefulness of the techniques presented, even in this extreme range.
Damping cells for the higher order modes are necessary for the S-band linear collider to minimize BBU (Beam-Break-Up). The construction of the damper cells has to take into account the different field geometries of the higher order modes. So two different types of dampers have been designed: a wall slotted an an iris slotted cell. In order to optimize the two types of damping cells with respect to damping strength, impedance matching between coupling system and waveguide dampers and between damping cell and undamped cells and the tuning system, damping cells of both types have been built and examinated.
Das Neldophon gehört mittlerweile zum internationalen Wortschatz Europas. Neldophonieren ist heute alltägliche Praxis. Die Globalisierung des ausgehenden zweiten Jahrtausends setzt die Entwicklung der Neldophonie voraus, um idealtypisch in naher Zukunft von jedem Punkt der Erde aus mit jedem beliebigen anderen Punkt in neldophonischer Verbindung zu sein. Eurosemantische Gemeinsamkeiten des Neldophonierens und die außersprachliche Partizipiation an der entsprechenden Technologie erleichterten die Akzeptanz des Terminus in den romanischen (und anderen) Sprachen Europas und der Welt trotz des Unikalmorphems Neldo-(vergleichbar mit Him- und Brom- in Him-, bzw. Brombeere) in Verbindung mit dem ansonsten global in verschiedenen Graphien verbreiteten Restmorphem -phon. Wörter haben ihre Geschichte. Der Ausdruck läßt sich auf seinen etymologischen Entstehungsort, den Congrés Europeu sobre Planificació Lingüística (Barcelona 9.-10. November 1995) zurückführen, andem auch der Gründer der FFM teilnahm. Offensichtlich wurde der Terminus hier in internationaler Umgebung erstmalig geprägt und sogleich panromanisch umgesetzt. Die barceloniner Gastgeber sprachen von neldòfon, während hingegen die wenigen Hispanophonen neldófono bevorzugten. Das Verbum neldofonar ist in der Zwischenzeit auch im Portugiesischen belegt, die Académie française wird sich kaum einer Äußerung enthalten können, ob neldophoner oder neldofoner (da offensichtlich im katalanischen Sprachbereich entstanden) die normgerechte Graphie repräsentiere, während Italien den europäischen Neologismus seit dem Herbst 1995 bereits kennt (chiamami più tardi al neldefono) und - zu Recht? - das etymologische ius primi loci beansprucht. In Rumänien erhielt das Verb eine systemimanente Stammerweiterung (Petre neldofoneazã mult) seit 1996. Nach zuverlässigen Quellen (Jernudd 1995) trat der Terminus Ende 1995 in seiner englischen Variante in Honkong in Kontakt mit dem Kantonesischen. Sein Überleben scheint jedoch hier (nach 1997) insbesondere wegen der phonologischen Problematik des liquiden Auslauts der Silbe nel- und diverser noch zu erwartender sprachpolitischer Konflikte nicht gesichert. Da die europäischen Neldophone in USA noch nicht funktionieren, ist eine gewisse Skepsis für den terminologischen Siegeszug der Neldophonie im Amerikanischen Englisch nicht unangebracht. ...
Rezeptive Mehrsprachigkeit ist eine der jüngsten Forderungen der EU-Kommission zum Erreichen einer realistischen Mehrsprachigkeit in Europa. Die maximalistischen Forderungen nach Perfektion in allen sprachlichen Kompetenzen haben sich in den nationalen Unterrichtswesen als illusionär erwiesen, da diese nirgendwo von statistisch nachvollziehbarem Erfolg gekrönt sind. Die sprachliche Diversität im multilingualen Europa findet sich nicht in der Realität der Bildungssysteme wieder. Zwar verfügen heute europaweit 26 % der Europäer über eine zweite und 8% über eine dritte Fremdsprache, in den einzelnen Ländern sieht es jedoch oft desolat aus. Während in den kleineren Unionsländern kaum jemand als nur monolingual gilt (Luxemburg 2%) ist die Krankheit der Einsprachigkeit in den großen EU-Staaten seuchenhaft verbreitet, etwa Großbritannien mit 66%. Dies hat in den neunziger Jahren in der Kommission zu den Postulaten geführt, die sich die Forschergruppe EuroCom als Programm gesetzt hat, nämlich Mehrsprachigkeit über den Einstieg in rezeptive Kompetenzen modularisiert und kognitiv über Transferbasen innerhalb von Sprachfamilien zu erreichen. EuroCom steht dabei als Kürzel für Eurocomprehension, ein Akronym für Europäische Interkomprehension in den drei großen Sprachengruppen Europas, der romanischen, slawischen und germanischen. Die Beschränkung auf rezeptive Kompetenzen ist dabei nur ein methodisches Ausgangsprinzip, das es ermöglicht, Mehrsprachigkeit besonders schnell über das Leseverständnis zu erreichen und modularisiert auf Hörverständnis und aktive Sprechkompetenz sukzessiv auszuweiten. Die Methode EuroCom arbeitet über die Aktivierung intralingualen Wissens mit linguistischem Transfermaterial in nahverwandten Sprachen, das als kognitives Potential den Erschließungsprozess optimiert und in kürzester Zeit ein Lese- und Hörverstehen in einer ganzen Sprachenfamilie erreichbar macht. ...
Accelerating cavities exchange HOM power through interconnecting beam pipes in case of signal frequencies above the cut-off of their propagating waveguide modes. This may lead either to improved HOM damping or - in the case most severe - to unwanted phase coherence of fields to the beam. Therefore the knowledge of the scattering properties of a cavity as a line element is needed to analyse all kinds of RF cavity-cavity interaction. Since there is a lack of measurement tools capable to provide a multidimensional scattering matrix at a given frequency point, we have been developing a method for this purpose. It uses a set of 2-port S-parameters of the device under test, embedded in a number of geometrically different RF environments. The application of the method is demonstrated with copper models of TESLA cavities.
Für Romanisten ist Interkomprehension seit der Begründung ihrer Disziplin ein Anliegen, für romanischsprachige Menschen ist sie meist ein persönliches Erlebnis der partiellen Entdeckung, vor 1500 Jahren war sie alltägliche Realität. Es geht um die Fähigkeit, in einer Gruppe von Sprachen, die einen gemeinsamen Ursprung haben, kommunizieren zu können.
Läßt man die Problematik der bei dieser Aussage verwendeten Ausdrücke außer Betracht und schränkt den Blickwinkel auf die Gruppe der romanischen Sprachen ein, so lassen sich eine Reihe von Aussagen über Interkomprehension machen.
Daß zwischen dem sechsten und achten Jahrhundert, also während der protoromanischen Phase, Interkomprehension zwischen entfernten Gegenden des niedergegangen Imperium Romanum möglich war, ist unstrittig, freilich gab es keine außersprachlichen Gründe, die das Faktum Interkomprehension in den Vordergrund hätten rücken können. Die einzig übriggebliebene Zentralmacht Kirche benutzte ihr eigenes Latein. ...