Refine
Document Type
- Article (15)
Language
- English (15)
Has Fulltext
- yes (15)
Is part of the Bibliography
- no (15)
Keywords
- 3D printing (2)
- 3D rapid prototyping (2)
- Complication management (2)
- Fistula (2)
- Flaps (2)
- Grafts (2)
- Maxillary sinus (2)
- Oral surgery (2)
- Oroantral (2)
- alveolar ridge augmentation (2)
Institute
- Medizin (15)
Objectives: To assess and compare the efficacy and safety of autogenous tooth roots (TRs) and autogenous bone blocks (ABs) for combined vertical and horizontal alveolar ridge augmentation and two-stage implant placement.
Materials and Methods: A total of 28 patients in need of implant therapy and vertical ridge augmentation were allocated to parallel groups receiving either healthy autogenous tooth roots (e.g., retained wisdom teeth) (n = 14, n = 15 defects) or cortical autogenous bone blocks harvested from the retromolar area (n = 14, n = 17 defects). After 26 weeks of submerged healing, the clinical reduction in ridge height (RH) deficiency was defined as the primary outcome.
Results: Both surgical procedures were associated with a similar mean reduction in RH deficiency values, amounting to 4.48 ± 2.42 mm (median: 4.25; 95% CI: 3.08–5.88) in the TR group and 4.46 ± 3.31 mm (median: 3.00; 95% CI: 2.54–6.38) in the AB group (p = .60, Mann–Whitney U-test). In all patients investigated, the reduction in RH deficiency values allowed for an adequate implant placement at the respective sites. The frequency of complications (e.g., soft tissue dehiscences) was low (TR: n = 4; AB: n = 0).
Conclusions: Up to staged-implant placement, both TR and AB grafts appeared to be associated with comparable efficacy and safety for combined vertical and horizontal alveolar ridge augmentation.
Objectives: To evaluate peri-implant tissue dimensions following nonsurgical (NS) and surgical therapy (S) employing different decontamination protocols of advanced ligature-induced peri-implantitis in dogs.
Material & Methods: Peri-implantitis defects (n = 5 dogs, n = 30 implants) were randomly and equally allocated in a split-mouth design to NS or S treatment using either an Er:YAG laser (ERL), an ultrasonic device (VUS), or plastic curettes + local application of metronidazole gel (PCM), respectively. Horizontal bone thickness (hBT) and soft tissue thickness (hMT) were measured at different reference points: (v0) at the marginal portion of the peri-implant mucosa (PM); (v1) at 50% of the distance from PM to bone crest (BC); (v2) at the BC; (v3) at the most coronal extension of the bone-to-implant contact. Vertical peri-implant tissue height was calculated from PM to BC.
Results: All of the treatment groups showed a gradual hMT increase from v0 to the v2 reference point, followed by a reduction from v2 to the v3 region. The S-VUS subgroup tended to be associated with higher hMT values at the v0 region than the NS-VUS subgroup (0.44 mm versus 0.31 mm). PM-BC distance varied from 2.22 to 2.83 mm in the NS group, and from 2.07 to 2.38 in the S group.
Conclusion: Vertical and horizontal peri-implant tissue dimensions were similar in different treatment groups.
The prevalence of peri-implant diseases around subcrestally placed implants: a cross-sectional study
(2021)
Objectives: To evaluate the prevalence of peri-implant health, peri-implant mucositis or periimplantitis for subcrestally placed implants (1–3 mm) on the short-, medium- and long term.
Material and Methods: Two hundred patients were enrolled in this cross-sectional study that were treated and screened during regular maintenance visits at one university center. A total of 657 implants were evaluated. Peri-implant health and diseases were assessed according to predefined case definitions. Binary logistic regression was used to assess the correlation with local and systemic factors.
Results: After a median function time of 9.36 ± 6.44 years (range: 1–26 years), the prevalence of peri-implant mucositis and peri-implantitis was 66.5% and 15.0%, at the patient level, corresponding to 62.6% and 7.5%, at the implant level, respectively. Peri-implantitis was significantly associated with patients’ history of periodontitis (odds ratio, OR 5.33).
Conclusion: Peri-implant diseases were a common finding around subcrestally placed implants.
Efficacy of platelet-rich fibrin in promoting the healing of extraction sockets: a systematic review
(2021)
Purpose: To address the focused question: in patients with freshly extracted teeth, what is the efficacy of platelet-rich fibrin (PRF) in the prevention of pain and the regeneration of soft tissue and bone compared to the respective control without PRF treatment?
Methods: After an electronic data search in PubMed database, the Web of Knowledge of Thomson Reuters and hand search in the relevant journals, a total of 20 randomized and/or controlled studies were included.
Results: 66.6% of the studies showed that PRF significantly reduced the postoperative pain, especially in the first 1–3 days after tooth extraction. Soft tissue healing was significantly improved in the group of PRF compared to the spontaneous wound healing after 1 week (75% of the evaluated studies). Dimensional bone loss was significantly lower in the PRF group compared to the spontaneous wound healing after 8–15 weeks but not after 6 months. Socket fill was in 85% of the studies significantly higher in the PRF group compared to the spontaneous wound healing.
Conclusions: Based on the analyzed studies, PRF is most effective in the early healing period of 2–3 months after tooth extraction. A longer healing period may not provide any benefits. The currently available data do not allow any statement regarding the long-term implant success in sockets treated with PRF or its combination with biomaterials. Due to the heterogeneity of the evaluated data no meta-analysis was performed.
Background: To assess the influence of ridge preservation procedures on the healing of extraction sockets under antiresorptive therapy.
Material and Methods: A total of 10 Dutch Belted rabbits were randomly allocated to either the intravenous administration of amino‐bisphosphonate (zoledronic acid) (Za) (n = 5) or a negative control group (no Za [nZa]) (n = 5). At 6 months, the mandibular and maxillary molars were extracted and the four experimental sites randomly allocated to the following subgroups: (a) socket grafting using a collagen‐coated natural bone mineral (BOC) + primary wound closure, (b) coronectomy (CO), or (c) spontaneous healing + primary wound closure (SP). Za medication was continued for another 4 months. Histomorphometrical analyses considered, for example, crestal hard tissue closure of the extraction site (C) and mineralized tissue (MT) formation.
Results: Za‐SP was associated with an incomplete median C (31.76% vs 100% in nZa‐SP) and signs of bone arrosion along the confines of the socket. BOC had no major effects on increases in C and MT values in the Za group. CO commonly resulted in an encapsulation and partial replacement resorption of residual roots by MT without any histological signs of osteonecrosis.
Conclusions: (a) Za‐SP was commonly associated with a compromised socket healing and signs of osteonecrosis, (b) BOC had no major effect on socket healing in the Za group, and (c) CO at noninfected teeth might be a feasible measure for the prevention of a Za‐related osteonecrosis of the jaw.
Objective: To assess the influence of biphasic calcium phosphate materials with different surface topographies on bone formation and osseointegration of titanium implants in standardized alveolar ridge defects.
Materials and methods: Standardized alveolar ridge defects (6 × 6 mm) were created in the mandible of 8 minipigs and filled with three biphasic calcium phosphate materials (BCP1–3, 90% tricalcium phosphate/10% hydroxyapatite) with different surface properties (micro- and macroporosities) as well as a bovine-derived natural bone mineral (NBM) as a control. At 12 weeks, implants were placed into the augmented defects. After further 8 weeks of healing, dissected blocks were processed for histological analysis (e.g., mineralized (MT), residual bone graft material (BS), bone-to-implant contact (BIC)).
Results: All four biomaterials showed well-integrated graft particles and new bone formation within the defect area. MT values were comparable in all groups. BS values were highest in the NBM group (21.25 ± 13.52%) and markedly reduced in the different BCP groups, reaching statistical significance at BCP1-treated sites (9.2 ± 3.28%). All test and control groups investigated revealed comparable and statistically not significant different BIC values, ranging from 73.38 ± 20.5% (BCP2) to 84.11 ± 7.84% (BCP1), respectively.
Conclusion* All bone graft materials facilitated new bone formation and osseointegration after 12 + 8 weeks of healing.
Objectives: To assess the short‐term clinical outcomes of lateral augmentation of deficient extraction sockets and two‐stage implant placement using autogenous tooth roots (TR).
Material and methods: A total of n = 13 patients (13 implants) were available for the analysis. At the time of tooth extraction, each subject had received lateral augmentation using the respective non‐retainable but non‐infected tooth root where the thickness of the buccal bone was <0.5 mm or where a buccal dehiscence‐type defect was present. Titanium implants were placed after a submerged healing period of 6 months and loaded after 20 ± 2 weeks (V8). Clinical parameters (e.g., bleeding on probing—BOP, probing pocket depth—PD, mucosal recession—MR, clinical attachment level—CAL) were recorded at V8 and after 26 ± 4 weeks (V9) of implant loading.
Results: At V9, all patients investigated revealed non‐significant changes in mean BOP (−19.23 ± 35.32%), PD (0.24 ± 0.49 mm), MR (0.0 ± 0.0 mm) and CAL (0.24 ± 0.49 mm) values, respectively. There was no significant correlation between the initial gain in ridge width and changes in BOP and PD values.
Conclusions: The surgical procedure was associated with stable peri‐implant tissues on the short‐term.
Background: The present study aimed to assess the three‐dimensional changes following soft tissue augmentation using free gingival grafts (FGG) at implant sites over a 3‐month follow‐up period.
Methods: This study included 12 patients exhibiting deficient keratinized tissue (KT) width (i.e., <2 mm) at the vestibular aspect of 19 implants who underwent soft tissue augmentation using FGG at second stage surgery following implant placement. Twelve implants were considered for the statistical analysis (n = 12). The region of interest (ROI) was intraorally scanned before surgery (S0), immediately post‐surgery (S1), 30 (S2) and 90 (S3) days after augmentation. Digital scanned files were used for quantification of FGG surface area (SA) and converted to standard tessellation language (STL) format for superimposition and evaluation of thickness changes between the corresponding time points. FGG shrinkage (%) in terms of SA and thickness was calculated between the assessed time points.
Results: Mean FGG SA amounted to 91 (95% CI: 63 to 119), 76.2 (95% CI: 45 to 106), and 61.3 (95% CI: 41 to 81) mm2 at S1, S2, and S3, respectively. Mean FGG SA shrinkage rate was 16.3% (95% CI: 3 to 29) from S1 to S2 and 33% (95% CI: 19 to 46) from S1 to S3. Mean thickness gain from baseline (S0) to S1, S2, and S3 was 1.31 (95% CI: 1.2 to 1.4), 0.82 (95% CI: 0.5 to 1.12), and 0.37 (0.21 to 0.5) mm, respectively. FGG thickness shrinkage was of 38% (95% CI: 17.6 to 58) from S1 to S2 and 71.8% (95% CI: 60 to 84) from S1 to S3. Dimensional changes from S1 to S3 were statistically significant, P <0.017. Soft tissue healing was uneventful in all patients.
Conclusions: The present three‐dimensional assessment suggests that FGG undergo significant dimensional changes in SA and thickness over a 3‐month healing period.
Aim: To assess volumetric tissue changes at peri‐implantitis sites following combined surgical therapy of peri‐implantitis over a 6‐month follow‐up period.
Materials and Methods: Twenty patients (n = 28 implants) diagnosed with peri‐implantitis underwent access flap surgery, implantoplasty at supracrestally or bucally exposed implant surfaces and augmentation at intra‐bony components using a natural bone mineral and application of a native collagen membrane during clinical routine treatments. The peri‐implant region of interest (ROI) was intra‐orally scanned pre‐operatively (S0), and after 1 (S1) and 6 (S2) months following surgical therapy. Digital files were converted to standard tessellation language (STL) format for superimposition and assessment of peri‐implant volumetric variations between time points. The change in thickness was assessed at a standardized ROI, subdivided into three equidistant sections (i.e. marginal, medial and apical). Peri‐implant soft tissue contour area (STCA) (mm2) and its corresponding contraction rates (%) were also assessed.
Results: Peri‐implant tissues revealed a mean thickness change (loss) of −0.11 and −0.28 mm at 1 and 6 months. S0 to S1 volumetric variations pointed to a thickness change of −0.46, 0.08 and 0.4 mm at marginal, medial and apical regions, respectively. S0 to S2 analysis exhibited corresponding thickness changes of −0.61, −0.25 and −0.09 mm, respectively. The thickness differences between the areas were statistically significant at both time periods. The mean peri‐implant STCA totalled to 189.2, 175 and 158.9 mm2 at S0, S1 and S2, showing a significant STCA contraction rate of 7.9% from S0 to S1 and of 18.5% from S0 to S2. Linear regression analysis revealed a significant association between the pre‐operative width of keratinized mucosa (KM) and STCA contraction rate.
Conclusions: The peri‐implant mucosa undergoes considerable volumetric changes after combined surgical therapy. However, tissue contraction appears to be influenced by the width of KM.
Background: Recent advances in 3D printing technology have enabled the emergence of new educational and clinical tools for medical professionals. This study provides an exemplary description of the fabrication of 3D‐printed individualised patient models and assesses their educational value compared to cadaveric models in oral and maxillofacial surgery.
Methods: A single‐stage, controlled cohort study was conducted within the context of a curricular course. A patient's CT scan was segmented into a stereolithographic model and then printed using a fused filament 3D printer. These individualised patient models were implemented and compared against cadaveric models in a curricular oral surgery hands‐on course. Students evaluated both models using a validated questionnaire. Additionally, a cost analysis for both models was carried out. P‐values were calculated using the Mann‐Whitney U test.
Results: Thirty‐eight fourth‐year dental students participated in the study. Overall, significant differences between the two models were found in the student assessment. Whilst the cadaveric models achieved better results in the haptic feedback of the soft tissue, the 3D‐printed individualised patient models were regarded significantly more realistic with regard to the anatomical correctness, the degree of freedom of movement and the operative simulation. At 3.46 € (compared to 6.51 €), the 3D‐printed patient individualised models were exceptionally cost‐efficient.
Conclusions: 3D‐printed patient individualised models presented a realistic alternative to cadaveric models in the undergraduate training of operational skills in oral and maxillofacial surgery. Whilst the 3D‐printed individualised patient models received positive feedback from students, some aspects of the model leave room for improvement.