Refine
Year of publication
Document Type
- Doctoral Thesis (24)
- Bachelor Thesis (14)
- Master's Thesis (12)
Has Fulltext
- yes (50)
Is part of the Bibliography
- no (50)
Keywords
- HADES (3)
- ALICE (2)
- CBM experiment (2)
- Flow (2)
- ALICE <Teilchendetektor> (1)
- ALICE upgrade (1)
- ALICE, Teilchendetektor (1)
- Ageing (1)
- Anisotropic flow (1)
- Blei (1)
Institute
- Physik (50)
Im Rahmen dieser Arbeit wurden grundlegende Eigenschaften von GEM-Verstärkungsstrukturen untersucht. Dies waren der Einfluss des Alignmenteffektes auf die Reproduzierbarkeit von Messungen, die Elektronenextraktionseffizienz von GEMs im allgemeinen und die Auswirkungen von Druckschwankungen auf die Gasverstärkung. Weiterhin wurden verschiedene vierlagige GEM-Verstärkungssysteme mit einer MP-GEM an erster Stelle in Hinblick auf Ionenrückfluss und Energieauflösung untersucht.
Der Alignmenteffekt ist noch nicht vollkommen verstanden und verlangt weitere Untersuchungen. Was aber definitiv gesagt werden kann ist, dass das Drehen der GEMs um 90° die Reproduzierbarkeit der Messergebnisse sicherstellt.
Die unterschiedlichen Elektronenextraktionseffizienzen der verschiedenen GEM-Typen sind noch unverstanden. Auch wenn die grundsätzliche Zunahme der Extraktion mit zunehmenden Transferfeld verständlich ist, so bleibt vor allem das Verhalten einer LP-GEM in diesem Kontext bis jetzt unerklärlich.
Die Versuche mit einer MP-GEM an erster Stelle einer vierlagigen Verstärkungsstruktur haben sich als keine Verbesserung im Vergleich zu den S-Konfigurationen herausgestellt. Auch wenn manche gefundenen Einstellungen die Kriterien von einem IBF von weniger als 1 % und einem σ(55Fe) von weniger als 12 % gleichzeitig erfüllen, liegen diese Messpunkte so knapp an den definierten Grenzen, dass sie nicht für den Betrieb in der Spurendriftkammer von ALICE geeignet sind. Eine Erkenntnis, die trotzdem gewonnen werden konnte, ist, dass sich das Verhalten von verschiedenen Konfigurationen verstehen lässt. So ist die beste untersuchte Konfiguration die MP-LP-LP-S-Konfiguration gewesen, danach folgte die MP-S-LP-S und als schlechteste hat die MP-S-LP-SP-Konfiguration abgeschnitten. Dies ist genau die gleiche Reihenfolge, wie sie auch bei den S-Konfigurationen auftritt: S-LP-LP-S, dann S-S-LP-S und danach S-S-LP-SP. Ein wichtiger Schritt in einem guten Kompromiss zwischen Ionenrückfluss und σ(55Fe), scheinen zwei LP-GEMs an zweiter und dritter Stelle zu sein und weniger der Lochabstand der letzten GEM.
Die Druckabhängigkeit der Gasverstärkung hat einen großen Einfluss auf die Verstärkung und damit auf die Reproduzierbarkeit von Messungen. Bei einem Höhenunterschied von ca. 400 m ergibt sich eine Änderung der Verstärkung von ca. 35 %. Zusätzlich wird dieser Effekt von lokalen Wetterbedingungen überlagert. Der Einfluss des Luftdruckes kann jedoch mit dem Fit in Abbildung 43 berücksichtigt und damit herausgerechnet werden
The Time Projection Chamber (TPC), a large gaseous detector, is the main particle identification device of the ALICE experiment at the CERN LHC. The desired performance of the TPC defines the requirements for the gas mixture used in the detector. The active volume was filled with either Ne-CO2 (90-10) or Ne-CO2-N2 (90-10-5) during the first LHC running period. For LHC Run 2 the gas mixture is changed to Ar-CO2. Calculations of relevant gas properties are performed for Ar-based gas mixtures and compared to Ne-based gas mixtures to identify the most suitable Ar mixture. The drift velocity of ions in Ar is lower than in Ne. The closing time of the gating grid has to be adjusted accordingly to avoid drift field distortions due to back-drifting ions. The drift times of ions in the TPC readout chambers are calculated for the respective gas mixtures to determine the time to collect all ions from the amplification region. For LHC Run 3 the TPC readout chambers will be upgraded. The Multiwire Proportional Chambers (MWPCs) will be replaced by readout chambers based on Gas Electron Multipliers (GEMs) which are operated in continuous mode. As a consequence an ion backflow of the order of 1% causes significant space-charge distortions in the TPC drift volume. Similar distortions are expected in data taken specifically for the study of space-charge effects at the end of Run 1. The gating grid of the MWPCs is operated in the open state allowing the ions from the amplification region to enter the drift volume. The magnitude of the distortions in this data is measured and compared to the expectations for the TPC upgrade and results from current simulations.
Da in der Run 3 Periode des CERN LHC die Kollisionsrate auf 50 kHz erhöht werden soll, muss die ALICE TPC umgebaut werden. Die Vieldrahtproportionalkammern mit Sperrgitter sollen gegen eine GEM-basierte Auslese ausgetauscht werden, um eine kontinuierliche Auslese zu ermöglichen.
Es wurde eine GEM-Testkammer, die mit drei und vier GEM-Folien betrieben werden kann, entwickelt und gebaut. GEM-Folien wurden unter dem Mikroskop auf Fehler untersucht und auf ihre Spannungsfestigkeit hin getestet sowie gerahmt und in die Kammer eingesetzt. Mit der fertigen kleinen TPC mit GEM-basierter Auslese wurden IBF und Energieauflösung gemessen. Ziel der Messungen war es, einen möglichst geringen IBF von unter 1 % zu erhalten, um so wenig wie möglich Feldverzerrungen im Driftvolumen der TPC zu erhalten, bei gleichzeitig guter Energieauflösung von mindestens 12 %, um eine gute Teilchenidentifikation in der TPC sicherzustellen.
Da standard GEM-Konfigurationen mit nur drei GEM-Folien zwar eine gute Energieauflösung, jedoch zu viel IBF aufweisen, wurden die Messungen hauptsächlich mit vier GEM-Folien durchgeführt. Es wurden zwei verschiedene Arten von GEM-Folien verwendet, Standard (S) und Large-Pitch (LP) GEM-Folien, die bei einem Großteil der Messungen in der S-LP-LP-S-Konfiguration angeordnet waren.
Es wurde festgestellt, dass sich IBF und Energieauflösung gegenläufig verhalten, bei besser werdendem IBF also die Energieauflösung schlechter wird und umgekehrt.
Es wurden zwei verschiedene Gasmischungen, Ne-CO2-N2 (90-10-5) und Ar-CO2 (90-10), untersucht. Mit Neon wurde bei einem Gain von 2000 gemessen, mit Argon nur bei einem Gain von 1000, da bei Argon die Anzahl der produzierten Elektronen pro cm etwa doppelt so groß ist.
Der IBF war mit beiden Gasmischungen etwa gleich groß. Die Energieauflösung war mit Argon jedoch aufgrund des niedrigeren Gains erheblich schlechter. Mit Ne-CO2-N2 (90-10-5) gelang es, einen Arbeitspunkt mit einer Energieauflösung von etwa 12 % und einem IBF von unter 1 % zu finden, mit Ar-CO2 (90-10) war dies jedoch nicht der Fall.
Im Laufe dieser Bachelor-Arbeit wurden verschiedene GEM-Anordnungen systematisch auf ihr IBF-Verhalten hin untersucht. Neben der Reproduktion zuvor durchgeführter Messungen wurden auch neue GEM-Kombinationen getestet. Insbesondere lag der Fokus darauf, eine Verbesserung des IBFs gegenüber des Baseline-Setups zu erzielen. Dabei kamen neben der bisher verwendeten S und LP Folien auch SP Folien zum Einsatz. Die Messungen brachten jedoch kein Ergebnis hervor, welches als Verbesserung gegenüber der Ausgangslage angesehen werden könnte. Da mit SP GEMs zuvor wenig gearbeitet wurde, war es unter anderem ein Ziel, zu untersuchen, wie sich die Verwendung dieser GEMs auf den IBF auswirkt. Insbesondere war die Frage zu klären, ob durch ihre Verwendung der IBF des Baseline-Setups
verbessert werden kann. Zum besseren Verständnis wurde ebenfalls eine Variante, S-S-LPS, untersucht. Für dieses Setup konnte durch die Verwendung einer SP Folie auf Position 4 eine Verbesserung des IBF bewirkt werden, für das Baseline-Setup jedoch nicht. Ein wesentliches Ergebnis dieser Bachelor-Arbeit war, dass das Alignment der GEMs, entgegen bisheriger Annahmen, eine große praktische Relevanz hat. Die relative Orientierung zweier aufeinander folgender GEMs gleichen Lochabstands zueinander hat einen großen Ein
uss auf die lokale Ionentransmission. Eine genauere Untersuchung hat ergeben, dass man dem entgegenwirken kann, indem man aufeinander folgende GEMs um 90° gedreht einbaut. Aufgrund der Geometrie der Folien verhindert man dadurch, dass sich die Löcher zweier Folien direkt ßber- bzw. untereinander anordnen. Ein solcher Aufbau konnte durch eine geringfügige Modifikation der Testkammer erreicht werden.
Mit diesem veränderten Aufbau wäre es nun das Ziel gewesen, alle bisherigen Messungen zu wiederholen und auf Reproduzierbarkeit hin zu überprüfen. Die Wiederholung einer Messreihe mit um 90° gedrehten GEMs hat im Rahmen der Fehlertoleranzen reproduzierbare
Ergebnisse geliefert. Aus zeitlichen Gründen war es jedoch im Rahmen dieserArbeit nicht möglich, eine vollständige Wiederholung aller Messungen durchzuführen. Dies wurde zu einem späteren Zeitpunkt von anderen Personen getan.
The production of quarkonia, the bound state of an heavy quark with its anti-particle, has for a long time been seen as a key process to understand the properties of nuclear matter in a relativistic heavy-ion collision. This thesis presents studies on the production of quarkonia in heavy-ion collisions at the new Large Hadron collider (LHC). The focus is set on the decay of J/Psi and Upsilon-states into their di-electronic decay channel, measured within the central detectors of the ALICE detector.
Optimierung der Rekonstruktionsparameter zur Messung von Quarkonia im zentralen ALICE Detektor
(2011)
Seit den ersten Kollisionen im November 2009 läuft der LHC am CERN und dringt in noch nie dagewesene Energiebereiche vor. Die Schwerionenkollisionen innerhalb des ALICE Detektors sollen Aufschluss über die stark wechselwirkende Materie und ihre verschiedenen Phasen geben. Dem liegt die Untersuchung des Quark-Gluon-Plasmas zugrunde. Eine Signatur des Quark-Gluon-Plasmas ist die Rate von produzierten Quarkonia. Diese zerfallen in Leptonenpaare und sind damit zu identifizieren.
In der vorliegenden Arbeit wird diese Rate zur Messung von Quarkonia aufgegriffen und untersucht. Bei der Untersuchung der Simulation durch die Selektion der e++e--Paare, die ausschließlich aus einem J/y stammen, lässt sich ein Massenspektrum produzieren, das im Rahmen dieser Arbeit genauer betrachtet wurde. Durch die genaue Untersuchung der Bremsstrahlung und deren Lokalisierung lässt sich zeigen, dass besonders der ITS ein hohes Maß an Bremsstrahlungsprozessen mit sich bringt, was auf die große Materialanhäufung zurückzuführen ist. Um dies näher zu untersuchen, wurde das Augenmerk auf den ITS gelegt. Eines der wichtigsten Merkmale, die den Bremsstrahlungsprozess beschreiben, ist der Energieverlust. Durch die Bethe-Heitler-Funktion lässt sich der gesamte Detektor nur bedingt beschreiben. Erst die Betrachtung, die sich mit einer Einschränkung auf den ITS und den Azimutwinkel beschäftigt, zeigt eine genaue Beschreibung durch die Parameter der Funktion.
Nach der genauen Beschreibung der Bremsstrahlung wurden verschiedene Methoden entwickelt, in denen die Bremsstrahlungsprozesse innerhalb des invarianten Massenspektums der e++e--Paare ausgeschnitten werden können. Die Methoden der Selektion durch die Anzahl der Spurpunkte sowie die Selektion durch die Position der Spurpunkte zeigen, dass bereits minimale Selektionen ein sehr gutes Signal ergeben. Durch den Vergleich mit den herkömmlichen Selektionen SPDany und SPDfirst, zeigt sich, dass hierbei viel Signal verloren geht und diese Methode für bestimmte Analysen optimiert werden kann.
Durch die Anwendung auf die Datensätze, die während einer Strahlzeit im Jahr 2010 genommen wurden, bestätigte sich die Vermutung. Durch die Selektion von SPDany wird das Signal reduziert. Vergleicht man die Anzahl der Einträge im Signalbereich durch die Reduktion der Teilchen ohne Spurpunkte im ITS (NITSpunkten>0) zu der Anzahl der Einträge durch SPDany, ergibt dies eine Verminderung von bis zu 40%. Die Ursache für den großen Verlust innerhalb des Signalbereichs wird zusätzlich verstärkt, indem der SPD durch Kühlungsprobleme ausgeschaltet ist.
Eine weitere Methode, die untersucht wurde, war die Reduktion der Auswirkungen von Bremsstrahlung mit Hilfe der Kinkanalyse. Diese Methode ließ keine qualitativen Rückschlüsse auf die Analyse der Bremsstrahlung zu.
Dennoch zeigt das Ergebnis, dass das Signal von J/y’s in Proton-Proton Kollisionen um mehr als 40% mehr Einträge verbessert werden kann und sich dieses Prinzip nicht nur theoretisch in den simulierten Daten niederschlägt sondern auch in den untersuchten Datensätzen. Nun gilt es, diese Methode auch in anderen Studien einzubauen, um so eine alltagstaugliche Überprüfung der Erkenntnisse zu gewährleisten.
Zunächst sind einige Methoden und Techniken zusammenfassend aufzuzählen, welche mir in meiner Zeit am IKF nahegebracht wurden.
Von technischer Seite her sind hier der Umgang mit der Instituts-eigenen Lichtmikroskop und den pA-Messgeräten sowie der analogen Messkette zu nennen. Außerdem gegebenen GEM-Folien auf Fehlstellen zu untersuchen, sie unter Spannung zu testen und anschließen in die Testkammer zu montieren und diese anschließend ordnungsgemäß in Betrieb zu nehmen. Während des Betriebs der Kammer sind neben den Messungen selbst auch die Programmierung in C++ um ein vorhandenes GUI zu verstehen und erweitern zu können zu nennen. In der Analyse der gewonnenen Daten ist vor allem die im Institut verbreiteten Analyse-Software „Root“ zu nennen um Daten zu verarbeiten, zu plotten und zu fitten.
Der physikalische Gehalt der Messungen war in Folge der ersten Messung nicht mit Sicherheit zu bestimmen, da die Raten-Abhängigkeit des IB entweder grundlegender physikalischer oder technischer Natur sein konnte, was näher zu untersuchen blieb. Nach wiederholter Messung mit größerem Messbereich und einer zweiten Messreihe mit einer anderen Gas-Mischung konnten jedoch Aussagen getroffen werden.
So konnte in der Argon-Messung die gleiche Raten-Abhängigkeit des IBF wie zuvor festgestellt werden, während der IBF in der Neon-Mischung kaum merklich anstieg. Außerdem ist festzuhalten, dass Messungen an der Kathode nur über 10 pA problemlos genau sind. Darunter werden die Werte bei zu wenig Messzeit weniger aussagekräftig.
Ziel der Bachelorarbeit war es, einen Versuch für das Fortgeschrittenen-Praktikum des Instituts für Kernphysik zu konzipieren, der es ermöglicht, die Lebensdauer von aus der kosmischen Strahlung entstandenen Myonen zu bestimmen.
Dazu wurden vorhandene Komponenten auf ihre Gebrauchstauglichkeit getestet und untersucht, insbesondere in Bezug auf die Größe der Szintillatoren, ob der für einen Praktikumsversuch zeitlich gegebene Rahmen eingehalten werden kann.
Es ergaben sich einige mechanische Probleme, insbesondere bei der Verbindung der neuen, größeren Szintillatoren mit den Photomultipliern, die angegangen wurden. Die zuerst getestete Methode stellte sich jedoch als uneffektiv heraus, sodass die endgültige Lösung mit Hilfe einer neuen, computergesteuerten Fräsmaschine der Feinmechanik-Werkstatt erreicht werden soll.
Um die entstandenen Daten zu verarbeiten, wurde ein entsprechendes Programm in LabVIEW entwickelt, das die am TDC abgegriffenen Daten auf ihre Relevanz untersucht und die Ergebnisse in eine Textdatei schreibt. Das LabVIEW Front Panel wurde dabei so gestaltet, dass es den Praktikanten alle wichtigen Daten in graphisch anschaulicher Weise liefert.
Die Daten aus der Textdatei werden dann mit Hilfe eines ROOT Makros mit zwei verschiedenen Exponentialfunktionen gefittet.
In ersten Messungen ergibt sich ein Wert für die Lebensdauer der Myonen, der erstaunlich nahe am Literaturwert liegt.
Heavy-ion collisions at ultra-relativistic energies allow access to the Quark-Gluon Plasma, the deconfined phase of the strong interaction, a state which is believed to have existed fractions of seconds after the big bang. Two-particle correlations at small relative momenta, and particularly their dependence on pair transverse mass, are distinctly sensitive to the reaction dynamics of the fireball created in heavy-ion collisions.
Being the heaviest system to extract a size of the particle emitting source, proton-lambda correlations extend the studied range in pair transverse mass and are therefore well suited to explore the dynamical behavior of the matter created in Pb-Pb collisions at the Large Hadron Collider. The centrality dependence of the extracted source radii affirms the expectations of a larger source for more central collisions. Source radii were attained over a span of more than 0.9 GeV/c2 in mean pair transverse mass with a source radius extracted for a mean transverse mass as high as 2.18 GeV/c2. The source radii decrease with increasing pair transverse mass, as expected in a hydrodynamical picture. The comparison with radii obtained from other particle species exhibits the clear breaking of an elsewhere proposed scaling behavior of source radii with mean pair transverse mass for all particle species.
Gamma-gamma correlations possibly allow to look past the barrier of kinetic freeze-out. Additionally, they bear the potential to solve the puzzling observation in heavy-ion collisions of an excess of photons with a large temperature-like inverse slope parameter on the one hand and an elliptic flow coefficient of photons comparable to the one of hadrons on the other hand. A striking signal in the two-photon correlation function is observed; however it seems likely to not be of quantum statistical origin. A path for further studies is laid out.
During RUN3 (2021-2023) of the Large Hadron Collider, the Time Projection Chamber (TPC) of ALICE will be operated with quadruple stacks of Gas Electron Multipliers (GEMs). This technology will allow to overcome the rate limitation due to the gated operation of the Multi-Wire Proportional Chambers (MWPCs) used in RUN1 (2009-2013) and RUN2 (2015-2018).
As part of the Upgrade project, long-term irradiation tests, so called "ageing tests", have been carried out. A test setup with a detector using a quadruple stack of 10x10cm2 GEMs was built and operated in Ar-CO2 and Ne-CO2-N2 gas mixtures. The detector performance such as gas gain and energy resolution were monitored continuously. In addition, outgassing tests of materials used for the assembly process of the upgraded TPC were performed. To reach the expected dose of the GEM-based TPC, the detector was operated at much higher gains than the TPC. It was found, that the GEMs could keep their performance within the projected lifetime of the TPC. Most of the tested materials showed no negative impact on the detector. For the tested epoxy adhesive no certain conclusion could be drawn.
At much higher doses than expected for the upgraded TPC, a new phenomenon was observed, which changed the hole geometry of the GEMs and led to a degradation of the energy resolution. Even though its occurrence is not expected during the lifetime of the GEM-based TPC, simulations were carried out to study this effect more systematically. The simulations confirmed, that a change of the hole geometries of the GEMs, lead to an increase of the local gain variation, which results in a decrease of the energy resolution.
Furthermore the effect of methane as quench gas on GEMs was studied, even though this gas is not foreseen to be used in the TPC. From ageing tests with single-wire proportional counters it is well known that hydrocarbons are produced in the plasma of the avalanches, which cover the electrodes and lead to a degradation of the detector performance. Even though GEMs have a quite different geometry, the ageing tests showed, that also this technology tends to methane-induced ageing. A loss of gas gain as well as a degradation of the energy resolution due to deposits on the electrodes was monitored. A qualitative and quantitative comparison between ageing in GEMs and proportional counters was performed.
The measurement of dielectrons (electron-positron pairs) allows to investigate the properties of strongly interacting matter, in particular the Quark-Gluon Plasma (QGP), which is created in relativistic heavy-ion collisions at the LHC. The evolution of the collision can be probed via dielectrons since electrons do not interact strongly and are created during all stages of the collision. One of the interests in dielectron measurements is motivated by possible modifications of the electromagnetic emission spectrum in the QGP, where pp collisions are used as a medium-free reference. The dielectron spectrum consists of contributions from various processes. In order to estimate contributions of known dielectron sources, simulations of the so-called dielectron cocktail are performed. In this thesis, dielectron cocktails in minimum bias pp collisions at p s = 7 TeV, p–Pb collisions at p sNN = 5.02 TeV and in central (0-10%) and semi-central (20-50%) Pb–Pb collisions at p sNN = 2.76 TeV at the LHC are presented.
The main focus of research in the field of high-energy heavy-ion physics is the study of the quark-gluon plasma (QGP). Topic of the present work is the measurement of electron-positron pairs (dielectrons), which grant direct access to some of the key properties of this state of matter, since after their formation they leave the hot and dense medium without significant interaction. In particular, the measurement of the initial QGP temperature is considered a "holy grail" of heavy-ion physics. Therefore, in addition to the analysis of existing data, a feasibility study has been conducted to determine to which extent this goal would be achievable by upgrading the ALICE experiment at CERN.
Dielectrons are produced during all stages of a heavy-ion collision, with their invariant mass reflecting the amount of energy available at the time of their formation. Dielectrons of highest mass are thus produced in the initial scatterings of the colliding nuclei by quark-antiquark annihilation. Correlated electron-positron pairs can also emerge from the decay chains of early-produced pairs of heavy-flavour (HF) particles. During the QGP stage and at the beginning of the hadronic phase, the system emits thermal radiation in the form of photons and dielectrons, which carry information about the medium temperature to the observer. In the final stage of the collision, decays of light-flavour (LF) hadrons produce additional contributions to the dielectron spectrum.
The present work is based on early data from the ALICE experiment recorded from lead-lead collisions at a center-of-mass energy of 2.76 TeV. Due to the limited amount of data, a focus is placed on achieving high efficiencies throughout the analysis. To this end, a special electron identification strategy is developed and a custom track selection applied, together resulting in a tenfold increase in pair efficiency. The dielectron spectrum is evaluated on a statistical basis, using a pair prefilter, which is optimized based on two signal quality criteria, to reduce the fraction of electrons and positrons from unwanted sources at minimum signal loss. In addition, an artifact of the track reconstruction is exploited to suppress pairs from photon conversions and to correct the dielectron yield for a contribution from different-conversion pairs. The main signal uncertainty is extracted from the deviation between results of 20 analysis settings and amounts to 20% in most of the studied kinematic range.
For comparison with the analysis results, a hadronic cocktail consisting of the LF and HF contributions is simulated, which can reasonably well describe the measured dielectron production, with a hint of an enhancement at low invariant mass. Two approaches to model the in-medium modification of the heavy-flavour are followed, resulting in up to 50% suppression, which creates some additional space for a thermal contribution at intermediate mass.
For a complete comparison between experimental data and theoretical expectation, two model calculations are consulted. The Thermal Fireball Model provides predictions for thermal dielectron radiation from the QGP and hadron gas. The data tends to be better described with these additional thermal contributions. For a comparison with a prediction by the UrQMD model, the HF component of the cocktail is subtracted from the data. This results in better agreement if the HF suppression by in-medium effects is taken into account.
The feasibility study in this work has served as a physical motivation for the ALICE upgrade for LHC Run 3. The precision with which the early temperature of the QGP can be determined via dielectrons is chosen as key observable. A multitude of individual contributions are merged into a fully modeled dielectron analysis. The resulting signal-to-background ratio represents some of the expected systematic uncertainties, while from the significance combined with the planned number of lead-lead collisions a realistic "measurement" with statistical fluctuations around the expected dielectron signal is generated using a Poisson sampling technique. Since the HF yield exceeds the QGP thermal radiation by about an order of magnitude, an additional analysis step exploiting the enhanced track reconstruction is introduced to reduce its contribution by up to a factor of five. The resulting reduction in pair efficiency is overcompensated by an up to hundred times higher collision rate. The entire cocktail is then subtracted from the sampled data to isolate the thermal excess yield. The final analysis of this spectrum shows that the inverse slope of the model prediction, which depends directly on the QGP temperature, can be reproduced within statistical and systematic uncertainties of about 10%.
The promising results of this study have contributed on the one hand to the realization of the ALICE upgrade and to a design decision for the new Inner Tracking System, and at the same time represent exciting predictions for upcoming measurements.
Das CBM-Experiment konzentriert sich auf die Untersuchung der Eigenschaften des Quark-Gluon-Plasmas bei hohen Netto-Baryonendichten und moderaten Temperaturen. An der zukünftigen Beschleunigeranlage FAIR an der GSI findet das Experiment, neben vielen anderen Experimenten, ihren Platz. Der TRD ist, neben dem RICH, STS und TOF, einer der zentralen Detektoren im CBM-Experiment. Der TRD nutzt dabei den physikalischen Effekt der Übergangsstrahlung, die durch ein geladenes Teilchen beim Durchqueren einer Grenze zweier Medien mit unterschiedlichen Dielektrizitätskonstanten mit einer gewissen Wahrscheinlichkeit entsteht, um Elektronen von Pionen trennen zu können. Im Jahr 2017 wurde an der DESY 4 TRD-Prototypen in einer Teststrahlzeit getestet. Dabei handelt es sich um große TRD-Module mit den Maßen 95 · 95 cm2 , was dem finalen Design sehr nahe kommt. Die Untersuchung der DESY-Daten in Kapitel 5 brachte große Problematiken in den Daten zum Vorschein. Die Hauptprobleme der DESY-Daten sind: 1) Bug des SPADIC-Chips 2.0, bei der FN-Trigger zeitlich verschoben wurden; 2) schwache und suboptimale Trigger-Bedingung, wodurch sehr viel Rauschen aufgenommen wurde. Die Daten müssen für weitere Auswertung aufbereitet werden, wobei sehr viel Information und Statistik verloren geht, da einige Daten durch diverse Probleme nicht mehr rekonstruierbar sind. Kapitel 6 beschäftigt sich mit der Simulation der Detektorantwort und geht genauer auf die einzelnen Schritte, die zur Simulation des vom SPADIC erzeugten Pulses benötigt werden, ein. Am Ende werden Ergebnisse aus beiden Datensätzen miteinander verglichen. Um einen optimalen Vergleich zu gewähren, wird die Simulation bestmöglich an die Einstellungen in der Teststrahlzeit angepasst. Hauptsächlich geht es um die Erhöhung des Gasgains und der Verschiebung der Peaking-Zeit des Pulses. Im Allgemeinen können wir in der Simulation einige Effekte, die auch in den DESY-Daten vorkommen, nachsimulieren. Wir erhalten zum Teil sehr unterschiedliche Ergebnisse in der Simulation, deren Richtigkeit nicht verifiziert werden kann, da die Daten aufgrund der Probleme unzuverlässig werden. Durch die Analyse der DESY-Daten konnten wir die Problematik in den Daten besser verstehen. Eine sinnvolle Anpassung der Simulation wird durch die Unzuverlässigkeit der DESY-Daten unmöglich. Für die Optimierung der Simulation müsste man einen Vergleich mit neueren, zuverlässigeren Daten aus zukünftigen Teststrahlzeiten nehmen.
Quarkonia are very promising probes to study the quark-gluon plasma. The essential baseline for measurements in heavy-ion collisions is high-precision data from proton-proton interactions. However, the basic mechanisms of quarkonium hadroproduction are still being debated. The most common models, the Color-Singlet Model, the non-relativistic QCD approach and the Color-Evaporation Model, are able to describe most of the available cross-section data, despite of their conceptual differences. New measures, such as the polarization, and data at a new energy regime are crucial to test the competing models. Another issue is an eventual interplay between the production process of a quarkonium state and the surrounding pp event. Current Monte Carlo event generators treat the hard scattering independently from the rest of the so-called underlying event. The investigation of possible correlations with the pp event might be very valuable for a detailed understanding of the production processes. ALICE ist the dedicated heavy-ion experiment at the LHC. Its design has been optimized for high-precision measurements in very high track densities and down to low transverse momenta. ALICE is composed of various different detectors at forward and at central rapidities. The most important detectors for this study are the Inner Tracking System and the Time Projection Chamber, allowing to reconstruct and identify electron candidate tracks within eta < 0.9. The Transition Radiation Detector has not been utilized at this stage of the analysis; however, it will strongly improve the particle identification and provide a dedicated trigger in the upcoming beam periods. ...
In April and May 2012 data on Au+Au collisions at beam energies of Ekin = 1.23A GeV were recorded with the High Acceptance Di-Electron Spectrometer, which is located at the GSI Helmholtz Center for Heavy Ion Research in Darmstadt, Germany. At this beam energy all hadrons containing strangeness are produced below their elementary production threshold. The required energy is not available in binary NN collisions but must be provided by the system e.g. through multi-particle interactions or medium effects like a modified in-medium potential (e.g. KN/ΛN potential). Thus, a high sensitivity to these medium effects is expected in the investigated system.
The baryon-dominated systems created in relativistic heavy-ion collisions (HIC) at SIS18 energies reach densities of about 2-3 times ground state density p0 and may be similar to the properties of matter expected in the inner core of neutron stars. It is in particular the behavior of hadrons containing strangeness, i.e. kaons and hyperons, and their potentials in the dense medium which may have severe implications on astrophysical objects and processes. As ab-initio calculations of quantum chromodynamics (QCD) cannot be performed rigorously on the lattice at finite baryo-chemical potentials due to the fermion sign problem, effective descriptions have to be used in order to model properties of dense systems and the involved particles. The only way to access the in-medium potential of strange hadrons above nuclear ground state density p0 is by comparing data from relativistic HIC to such effective microscopic models. Up to now, not much data on neutral kaons and Λ hyperons are available from heavy collision systems close to their NN production threshold. These two electromagnetically uncharged strange hadrons are in particular well suited to study their potential in a dense nucleon-dominated environment as their kinematic spectra are not affected by Coulomb interactions.
In this thesis, the production of charged kaons and Φ mesons in Au+Au collisions at sqrt sAuAu = 2.4 GeV is studied. At this energy, all particles carrying open and hidden strangeness are produced below their respective free nucleon-nucleon threshold with the corresponding so-called excess energies: sqrt sK+ exc = -0.15 GeV, sqrt sK- exc = -0.46 GeV, sqrt sΦ exc = -0.49 GeVGeV. As a consequence, the production cross sections are very sensitive to medium effects like momentum distributions, two- or multistep collisions, and modification of the in-medium spectral distribution of the produced states [1]. K+ and K- mesons exhibit different properties in baryon dominated matter, since only K- can be resonantly absorbed by nucleons. Although strangeness exchange reactions have been proposed to be the dominant channel for K- production in the analyzed energy regime, the production yield and kinematic distributions could also be explained in smaller systems based on statistical hadronization model fits to the measured particle yields, including a canonical strangeness suppression radius RC, and taking the Φ feed-down to kaons into account [2, 3]. For the first time in central Au+Au collisions at such low energies, it is possible to reconstruct and do a multi differential analysis of K- and Φ mesons. In principle, this should be the ideal environment for strangeness exchange reactions to occur, as the particles are produced deeply sub-threshold in a large and long-living system. Therefore, it is the ultimate test to differentiate between the different sources for K- production in HIC.
In total 7.3x10exp9 of the 40% most central Au(1.23 GeV per nucleon)+Au collisions are analyzed. The data has been recorded with the High Acceptance DiElectron Spectrometer HADES located at Helmholtzzentrum für Schwerionenforschung GSI in April/May 2012. A substantially improved reconstruction method has been employed to reconstruct the hadrons with high purity in a wide phase space region.
The estimated particle multiplicities follow a clear hierarchy of the excess energy: 41.5 ± 2.1|sys protons at mid-rapidity per unit in rapidity, 11.1 ± 0.6|sys ± 0.4|extrapol π-, (3.01 ± 0.03|stat ± 0.15|sys ± 0.30|extrapól) x10 exp -2 K+, (1.94 ± 0.09|stat ± 0.10|sys ± 0.10|extrapol)x10 exp -4 K- and (0.99 ± 0.24|stat ± 0.10|sys ± 0.05|extrapol)x10 exp -4 Φ per event. The multiplicities of the strange hadrons increase more than linear with the mean number of participating nucleons hAparti, supporting the assumption that the necessary energy to overcome the elementary production threshold is accumulated in multi-particle interactions. Transport models predict such an increase, but are overestimating the measured particle yield and are not able to describe the kinematic distributions of K+ mesons perfectly. However, the best description is given by the IQMD model with a density dependent kaonnucleon potential of 40 MeV at nuclear ground state density.
The K-=K+ multiplicity ratio is constant as a function of centrality and follows with (6.45 ± 0.77)x10 exp -3 the trend of increasing with beam energy indicated from previous experiments [4]. The effective temperature of K- TK+eff = (84 ± 6) MeV is found to be systematically lower than the one of K+ TK+eff = (104 ± 1) MeV, which has also been observed by the other experiments.
The Φ=K- ratio is with a value of 0.52 ± 0.16 higher than the one obtained at higher center-of-mass energies and smaller systems. This behavior is predicted from a tuned version of the UrQMD transport model [5], when including higher mass baryonic resonances which can decay into Φ mesons and from statistical hadronization models when suppressing open strangeness canonically. The found ratio is constant as a function of centrality and results with a branching ratio of 48.9%, that ~ 25% of all measured K- originate from Φ feed-down decays. A two component PLUTO simulation, consisting of a pure thermal and a K- contribution originating from Φ decays, can fully explain the observed lower effective temperature in comparison to K+ and the shape of the measured rapidity distribution of K-. As a result, we find no indication for strangeness exchange reactions being the dominant mechanism for K- production in the SIS18 energy regime, if taking the contribution from Φ feed-down decays into account.
The hadron yields for the 20% most central collisions can be described by a statistical hadronization model fit with the chemical freeze-out temperature of Tchem = (68 ± 2) MeV and baryochemical potential of μB = (883 ± 25) MeV, which is higher than expected from previous parameterizations. The analysis of the transverse mass spectra of protons indicate a kinetic freeze-out temperature of Tkin = (70 ± 4) MeV and radial flow velocity of βr = 0.43 ± 0.01, which is in agreement with the parameters obtained from the linear dependence of the effective temperatures on the particle mass Tkin = (71.5 ± 4.2) MeV and βr = 0.28 ± 0.09.