Institutes
Refine
Document Type
- Article (17) (remove)
Has Fulltext
- yes (17)
Is part of the Bibliography
- no (17)
Keywords
- bibliometrics (2)
- Aedes aegypti (1)
- Aedes albopictus (1)
- Airport-related emissions (1)
- Ambient air (1)
- Anderson–Fabry (1)
- Bevölkerungsschutz (1)
- Bibliometrics (1)
- COVID-19 (1)
- Cerebrospinal fluid diagnostics (1)
Institute
- Medizin (17)
- Geowissenschaften / Geographie (1)
Despite antagonizing attempts from the tobacco industry, passive inhalation of tobacco smoke is known to be cancerogenic and toxic to human health for decades. Nonetheless, millions of non-smoking adults and children are still victims of second-hand smoke. Accumulation of particulate matter (PM) in confined spaces such as the car are particularly harmful due to high concentrations. We here aimed to analyze the specific effects of ventilation conditions in the setting of a car. By the use of the measuring platform TAPaC (tobacco-associated particulate matter emissions inside a car cabin), 3R4F reference cigarettes, Marlboro red, and Marlboro gold were smoked in a car interior with a volume of 3.709 m3. Seven different ventilation conditions (C1–C7) were analyzed. Under C1, all windows were closed. Under C2–C7, the car ventilation was turned on power level 2/4 with the air directed towards the windshield. Only the passenger side window was opened, where an outer placed fan could create an airstream speed of 15.9–17.4 km/h at one meter distance to simulate a driving car. C2: Window 10 cm opened. C3: Window 10 cm opened with the fan turned on. C4: Window half-opened. C5: Window half-opened with the fan turned on. C6: Window fully opened. C7: Window fully opened with the fan turned on. Cigarettes were remotely smoked by an automatic environmental tobacco smoke emitter and a cigarette smoking device. Depending on the ventilation condition the cigarettes emitted different mean PM concentrations after 10 min under condition C1 (PM10: 1272–1697 µg/m3, PM2.5: 1253–1659 µg/m3, PM1: 964–1263 µg/m3) under C2, C4, and C6 (PM10: 68.7–196.2 µg/m3, PM2.5: 68.2–194.7 µg/m3, PM1: 66.1–183.8 µg/m3) C3, C5, and C7 (PM10: 73.7–139 µg/m3, PM2.5: 72–137.9 µg/m3, PM1:68.9–131.9 µg/m3). Vehicle ventilation is insufficient to protect passengers from toxic second-hand smoke completely. Brand-specific variations of tobacco ingredients and mixtures markedly influence PM emissions under ventilation conditions. The most efficient ventilation mode to reduce PM exposure was achieved by opening the passenger´s window 10 cm and turning the onboard ventilation on power level 2/4. In-vehicle smoking should be banned to preserve innocent risk groups (e.g., children) from harm.
Background: Particulate matter (PM) emission caused by tobacco combustion leads to severe health burdens worldwide. Second-hand smoke exposure is extraordinarily high in enclosed spaces (e.g., indoor rooms, car cabins) and poses a particular threat to the health of vulnerable individuals (e.g., children, elderly, etc.). This study aimed to establish a new measuring platform and investigate PM emissions under four different ventilation conditions inside a car cabin without exposing any person to harmful tobacco smoke.
Methods: PM concentrations were measured during the smoking of 3R4F reference cigarettes in a Mitsubishi Space Runner (interior volume 3.709 m3). The cigarettes were smoked with a machine, eliminating exposure of the researchers. Cigarettes were extinguished 4.5 min after ignition, and PM measurements continued until 10 min after ignition.
Results: High mean PM concentrations were measured for cigarettes without ventilation after 4.5 min (PM10: 1150 µg/m3, PM2.5: 1132 µg/m3, PM1: 861.6 µg/m3) and after 10 min (PM10: 1608 µg/m3, PM2.5: 1583 µg/m3, PM1: 1133 µg/m3). 3R4F smoked under conditions with turned on ventilation resulted in reduction of PM compared to those smoked without ventilation after 4.5 min (PM10:-47.5 to -58.4%, PM2.5:-47.2 to -58%, PM1:-39.6 to -50.2%) and after 10 min (PM10:-70.8 to -74.4%, PM2.5:-70.6 to -74.3%, PM1:-64.0 to -68.0%). Cigarettes smoked without ventilation generated high PM peaks at 4.5 min (PM10: 2207 µg/m3, PM2.5: 2166 µg/m3, PM1: 1421 µg/m3) and at 10 min (PM10: 1989 µg/m3, PM2.5: 1959 µg/m3, PM1: 1375 µg/m3). PM peaks of cigarettes smoked under different ventilation modes varied at 4.5 min (PM10: 630-845 µg/m3, PM2.5: 625-836 µg/m3, PM1: 543 - 693 µg/m3) and 10 min (PM10: 124 - 130 µg/m3, PM2.5: 124 - 129 µg/m3, PM1: 118 - 124 µg/m3).
Conclusion: The new measuring platform provides a safer way for researchers to investigate PM emissions of cigarettes. These data are comparable to published research and show that smoking in a parked vehicle with the windows closed generates harmful PM emissions even when the vehicle ventilation is in operation. Future studies should be carried out using the new measuring platform investigating PM exposure and PM distribution of in-vehicle smoking under a wide range of conditions.
Die vorliegende Übersicht zum Biomarker Neurofilament-Leichtketten (NFL) wird im Rahmen der Serie „Biomarker“ des Zentralblatts für Arbeitsmedizin, Arbeitsschutz und Ergonomie publiziert. Das NFL ist ein Serummarker in der Diagnostik der multiplen Sklerose. NFL eignet sich als Marker zur Therapie‑, Verlaufs- und Rezidivkontrolle von multipler Sklerose. Hier zeigt dieser eine hohe Sensitivität und Spezifität.
Container-breeding Aedes spp. (Diptera: Culicidae) mosquitoes can be surveilled at low cost using ovitraps. Hence, this method is a preferred monitoring approach of dengue vectors in low-resource settings. The ovitraps consist of a cup filled with water and an oviposition substrate for female mosquitoes. The attractiveness of the substrates for female mosquitoes can greatly differ due to differences in texture, color, and smell of the materials used. We compare four oviposition substrates, which are all low priced, easy to transport, and easy to purchase, to maximize the success of Aedes egg sampling. Sampled egg material is often reared to adulthood for further taxonomic identification and transported to (international) laboratories for specialized vector research. Here we introduce a transport technique for sampled eggs. In addition, we explored the impact of international transport by means of a bilateral hatching experiment in Nepal, the country of origin, and in Germany, in a laboratory specialized in ecophysiological research. The best low-cost oviposition substrate for the dengue vectors Aedes albopictus (Skuse) and Aedes aegypti (L.) was found to be a white cotton sheet. The introduced transport technique of sampled eggs is easy to build from laboratory and household materials and ensures good transport conditions (i.e., temperature and relative humidity). Even under good temperature (17.4–31.0 °C) and humidity conditions (58.9–94.2%), hatching success of eggs was found to be reduced after international transport to Germany when compared to the hatching success of eggs in Nepal. We postulate that air pressure during international transport may have reduced the hatching success and strongly recommend pressure-regulated transport boxes for egg transport via airplane. As the proposed operation procedure is useful in assisting the monitoring of Ae. albopictus and Ae. aegypti in low-resource settings, Aedes researchers are encouraged to follow it for the sampling and transport of Aedes eggs.
Background: Climate change is safe to be one of the biggest challenges of mankind. Human activities, especially the combustion of fossil fuels, contribute to the increase of greenhouse gases in the atmosphere and thus to the pace of climate change. The effects of climate change are already being felt, and the resulting damage will most likely be enormous worldwide. Because global impacts vary widely and will lead to very different national vulnerability to climate impacts, each country, depending on its economic background, has different options to ward off negative impacts. Decisions have to be made to mitigate climate consequences according to the preparedness and the vulnerability of countries against the presumed impacts. This requires a profound scientific basis. To provide sound background information, a bibliometric study was conducted to present global research on climate change using established and specific parameters. Bibliometric standard parameters, established socioeconomic values, and climate change specific indices were used for the analyses. This allowed us to provide an overall picture of the global research pattern not only in terms of general aspects, but also in terms of climate change impacts, its effects and regional differences. For this purpose, we choose representative indices, such as the CO2 emissions for the responsibility of countries, the global climate risk index as a combination value for the different types of damage that countries can expect, the increase in sea level as a specific parameter as a measure of the huge global environmental impacts, and the readiness and vulnerability index for the different circumstances of individual countries under which climate change will take place. We hope to have thus made a comprehensive and representative selection of specific parameters that is sufficient to map the global research landscape. We have supplemented the methodology accordingly.
Results: In terms of absolute publication numbers, the USA was the leading country, followed by the UK, and China in 3rd place. The steep rise in Chinese publication numbers over time came into view, while their citation numbers are relatively low. Scandinavian countries were leading regarding their publication numbers related to CO2 emission and socioeconomic indices. Only three developing countries stand out in all analyses: Costa Rica, the Fiji Atoll, and Zimbabwe, although it is here that the climate impact will be greatest. A positive correlation between countries’ preparedness for the impacts of climate change and their publication numbers could be shown, while the correlation between countries’ vulnerability and their publication numbers was negative.
Conclusions: We could show that there exists an inequity between national research efforts according to the publication output and the demands and necessities of countries related to their socioeconomic status. This inequity calls for a rethink, a different approach, and a different policy to improve countries' preparedness and mitigation capacity, which requires the inclusion of the most affected regions of the world in a strengthened international cooperation network.
Background: Fabry disease (FD), the second most prevalent lysosomal storage disorder, is classified as a rare disease. It often leads to significant quality of life impairments and premature death. Many cases remain undiagnosed due to the rarity and heterogeneity. Further, costs related to treatment often constitute a substantial financial burden for patients and health systems. While its epidemiology is still unclear, newborn screenings suggest that its actual prevalence rate is significantly higher than previously suspected. Methods: Based on well-established methodologies, this study gives an overview about the background of the development of FD-related research and provides a critical view of future needs. Results: On the grounds of benchmarking findings, an increasing research activity on FD can be observed. Most publishing countries are the USA, some European countries, Japan, Taiwan, and South Korea. In general, high-income countries publish comparably more on FD than low- or middle-income economies. The countries' financial and infrastructural background are unveiled as crucial factors for the FD research activity. Conclusions: Overall, there is a need to foster FD research infrastructure in developing and emerging countries with focus on cost-intensive genetic research that is independent from economic interests of big pharmaceutical companies.
The question of whether nuclear energy—as a source with relatively low carbon dioxide emissions—can be classified as a sustainable energy source has come into focus in connection with climate change. There is a controversy over securing independence from fossil fuels and gas supplies from other countries through a revival of nuclear energy. On the other hand, some viewpoints are critical: the handling of nuclear waste and the still unclear risks to human health and the environment, especially in light of recent perils from Russian military attacks on Ukrainian nuclear plants. To evaluate the worldwide publications on nuclear energy under health and environmental aspects, socio-economic parameters were included to provide an informed background for all stakeholders, from scientists to decision-makers. The correlation between the number of nuclear power plants and the publication output of the countries is proven to be highly significant. Thus, the operating countries publish the most. It has been shown that the development and economic use of nuclear energy are major stimuli for scientific endeavors. Reactor accidents have also spurred research. Mathematical risk modeling has been the area with the highest citation rate to date, but environmental and health aspects have become more important, especially after major accidents. The results show the importance of economic interests in research on nuclear energy from health and environmental aspects. Against the background of transnational hazards, global research participation should be encouraged. Moreover, the international debate should not ignore the reality of threats and their possible impacts.
Highlights
• Currently, China has the most publications, ahead of the USA and European countries.
• Research focuses are strictly separated into ecological and material science topics.
• Russia and Ukraine are among the frontrunners with a clear focus on materials science.
• The focus in PFAS research is shifting toward ecological issues.
• A national imbalance can be observed that leaves the low economies behind.
Abstract
The European Commission's current efforts to launch the largest proposal to restrict per- and polyfluoroalkyl substances (PFAS) in history reflect the dire global plight of PFAS accumulation in the environment and their health impacts. While there are existing studies on PFAS research, there is a lack of comprehensive analysis that both covers the entire research period and provides deep insights into global research patterns, incentives, and barriers based on various parameters. We have been able to demonstrate the increasing interest in PFAS research, although citation numbers are declining prematurely. Policy regulations based on proving and establishing the toxicity of PFASs have stimulated research in developed countries and vice versa, with increasing emphasis on ecological aspects. China, in particular, is investing increasingly in PFAS research, but without defining or implementing regulations - with devastating effects. The separation of industrial and environmental research interests is clear, with little involvement of developing countries, even though their exposure to PFAS is devastating. It, therefore, requires increased globally networked and multidisciplinary approaches to address PFAS contamination challenges.
Background: SARS-CoV-2 is one of the most threatening pandemics in human history. As of the date of this analysis, it had claimed about 2 million lives worldwide, and the number is rising sharply. Governments, societies, and scientists are equally challenged under this burden. Objective: This study aimed to map global coronavirus research in 2020 according to various influencing factors to highlight incentives or necessities for further research. Methods: The application of established and advanced bibliometric methods combined with the visualization technique of density-equalizing mapping provided a global picture of incentives and efforts on coronavirus research in 2020. Countries’ funding patterns and their epidemiological and socioeconomic characteristics as well as their publication performance data were included. Results: Research output exploded in 2020 with momentum, including citation and networking parameters. China and the United States were the countries with the highest publication performance. Globally, however, publication output correlated significantly with COVID-19 cases. Research funding has also increased immensely. Conclusions: Nonetheless, the abrupt decline in publication efforts following previous coronavirus epidemics should demonstrate to global researchers that they should not lose interest even after containment, as the next epidemiological challenge is certain to come. Validated reporting worldwide and the inclusion of low-income countries are additionally important for a successful future research strategy.
Background: The currently prevailing global threat of COVID-19 caused the publication numbers on coronaviruses to explode. The awareness of the scientific and public community is enormous. But what about the sense of all these undertakings and what can be learned about the future for a better understanding? These questions were answered with established bibliometric analyses of the time until the avalanche of publications unfolded.
Methods: Chronological, geographical aspects of publication output on coronavirus were also evaluated under the influence of epidemiological and socio-economic parameters.
Results: The trend in publication and citation numbers shows the strong influence of the past pandemics SARS and MERS with an untypical decline afterward. Research is becoming increasingly multidisciplinary over time. The USA and China, as the countries with the highest number of publications, are being displaced by other countries in the consideration of socio-economic and epidemiological aspects, which shows the effect of regional interest in corona research. A significant correlation was found between the number of SARS cases per country and related publications, while no correlation was found for MERS cases and articles.
Conclusions: The results underline the need for sustainable and forward-looking approaches that should not end with the containment of COVID-19.