Biochemie und Chemie
Refine
Year of publication
Document Type
- Article (1113)
- Doctoral Thesis (729)
- Book (46)
- Preprint (34)
- Contribution to a Periodical (14)
- Conference Proceeding (11)
- Report (11)
- Review (9)
- diplomthesis (3)
- Part of a Book (2)
Has Fulltext
- yes (1978)
Is part of the Bibliography
- no (1978)
Keywords
- crystal structure (37)
- Crystal Structure (25)
- Synthesis (15)
- ESR Spectra (14)
- RNA (14)
- NMR-Spektroskopie (12)
- hydrogen bonding (11)
- IR Spectra (10)
- NMR spectroscopy (10)
- RNS (9)
Institute
- Biochemie und Chemie (1978)
- Medizin (83)
- Exzellenzcluster Makromolekulare Komplexe (68)
- Biowissenschaften (64)
- Präsidium (64)
- Zentrum für Biomolekulare Magnetische Resonanz (BMRZ) (63)
- Pharmazie (52)
- MPI für Biophysik (50)
- Sonderforschungsbereiche / Forschungskollegs (48)
- Georg-Speyer-Haus (22)
Human Transformer2-beta (hTra2-beta) is an important member of the serine/arginine-rich protein family, and contains one RNA recognition motif (RRM). It controls the alternative splicing of several pre-mRNAs, including those of the calcitonin/calcitonin gene-related peptide (CGRP), the survival motor neuron 1 (SMN1) protein and the tau protein. Accordingly, the RRM of hTra2-beta specifically binds to two types of RNA sequences [the CAA and (GAA)2 sequences]. We determined the solution structure of the hTra2-beta RRM (spanning residues Asn110–Thr201), which not only has a canonical RRM fold, but also an unusual alignment of the aromatic amino acids on the beta-sheet surface. We then solved the complex structure of the hTra2-beta RRM with the (GAA)2 sequence, and found that the AGAA tetra-nucleotide was specifically recognized through hydrogen-bond formation with several amino acids on the N- and C-terminal extensions, as well as stacking interactions mediated by the unusually aligned aromatic rings on the beta-sheet surface. Further NMR experiments revealed that the hTra2-beta RRM recognizes the CAA sequence when it is integrated in the stem-loop structure. This study indicates that the hTra2-beta RRM recognizes two types of RNA sequences in different RNA binding modes.
The CUG-binding protein 1 (CUG-BP1) is a member of the CUG-BP1 and ETR-like factors (CELF) family or the Bruno-like family and is involved in the control of splicing, translation and mRNA degradation. Several target RNA sequences of CUG-BP1 have been predicted, such as the CUG triplet repeat, the GU-rich sequences and the AU-rich element of nuclear pre-mRNAs and/or cytoplasmic mRNA. CUG-BP1 has three RNA-recognition motifs (RRMs), among which the third RRM (RRM3) can bind to the target RNAs on its own. In this study, we solved the solution structure of the CUG-BP1 RRM3 by hetero-nuclear NMR spectroscopy. The CUG-BP1 RRM3 exhibited a noncanonical RRM fold, with the four-stranded b-sheet surface tightly associated with the N-terminal extension. Furthermore, we determined the solution structure of the CUG-BP1 RRM3 in the complex with (UG)3 RNA, and discovered that the UGU trinucleotide is specifically recognized through extensive stacking interactions and hydrogen bonds within the pocket formed by the b-sheet surface and the N-terminal extension. This study revealed the unique mechanism that enables the CUG-BP1 RRM3 to discriminate the short RNA segment from other sequences, thus providing the molecular basis for the comprehension of the role of the RRM3s in the CELF/Bruno-like family.
The well-resolved helium(I) photoelectron spectrum of H3C-Se—Se-CH3 exhibits distinct bands corresponding to 11 of the total 13 valence electron ionizations. The unequivocal assignment is supported by EHMO calculations including spin/orbit coupling. The two selenium lone pair ionizations differ by 0.23 eV; a split observed also for dimethyl disulfide and discussed within a general model for interactions between adjacent lone pairs.
The photoelectron spectrum of H5C6-Te-CH3 displays in its low energy region overlapping bands of gas-phase conformers. Depending on the dihedral angle between the plane of the phenyl ring and the tellurium lone pair, the π conjugation amounts to only 0.1 eV and 0.3 eV, respectively. These values are compared to the considerably larger ones found for the analogous phenyl derivatives H5C6-X-CH3 with X = O, S and Se.
Three-dimensional structure of the glycine-betaine transporter BetP by cryo electron crystallography
(2008)
The soil bacterium Corynebacterium glutamicum has five secondary transporters for compatible solutes allowing it to cope with osmotic stress. The most abundant of them, the transporter BetP, performs a high affinity uptake of glycine-betain when encountering hyperosmotic stress. BetP belongs to the betaine/carnitine/choline/transporter (BCCT) family, and is predicted to have twelve transmembrane helices with both termini facing the cytoplasm. The goal of this thesis is to facilitate understanding of BetP function by determining a three dimensional (3D) model of its structure. Two-dimensional (2D) crystallization of wild-type (WT) BetP has been successfully performed by reconstitution into a mixture of E. coli lipids and bovine cardiolipin, which resulted in vesicular crystals diffracting to 7.5 Å resolution (Ziegler, Morbach et al. 2004). Diffraction patterns of these crystals however showed unfocused spots, generally due to high mosaicity. Better results were obtained by using the constitutively active mutant BetPdeltaC45 in which the first 45 amino acids of the positively charged C-terminus were removed. BetPdeltaC45 crystals obtained under the same conditions for BetP WT were concluded to be pseudo crystals, based on the inconsistence of symmetry. These crystals had BetPdeltaC45 molecules randomly up/downwards inserted into membrane crystals, and cannot be used for structure determination, even though they diffracted up to 7 Å. The problem of pseudo crystal formation could be solved by changing the lipids used for 2D crystallization to a native lipid extract from C. glutamicum cells. This change of lipids improved the crystals to well-ordered packing with exclusive p121_b symmetry. To understand the role of lipids in crystal packing and order, lipids were extracted at different stages during crystallization, and identified by using multiple precursor ion scanning mass spectrometry. The results show that phosphatidyl glycerol (PG) 16:0-18:1 is the most dominant lipid species in C. glutamicum membranes, and that BetP has a preference for the fatty acid moieties 16:0-18:1. Crystallization with synthetic PG 16:0-18:1 proved that an excess of this lipid prevents pseudo crystal formation, but these crystals did not reach the quality as previously achieved by using the C. glutamicum lipids. Apart from the effect of lipids in crystallinity, the concentration and type of salts influenced crystal growth and morphology. High salt conditions (>400 mM LiCl or KCl) yielded tubular crystals, whereas low salt conditions (<300 mM LiCl, NaCl or KCl) led to formation of up to 10 µm large sheet-like crystals. The intermediate concentration gave a mixture of sheet-like and tubular crystals. In terms of resolution, sheets diffracted better than tubes. The sheet-like crystals used for 3D map reconstruction were obtained from a dialysis buffer containing 200 mM NaCl combined with using C. glutamicum lipids. Electron microscopic images were taken from frozen-hydrated crystals using a helium-cooled JEOL 300 SFF microscope or a liquid nitrogen-cooled FEI Tecnai G2 microscope at 300 kV, which allowed optimal data collection and minimized radiation damage to the sample. More than 1000 images of tilt angles up to 50° were taken and evaluated using optical diffraction of a laser beam. The best 200 images were processed with the MRC image processing software package, and 79 images from different tilt angles were merged to the final data set used for calculation of a 3D map at a planar resolution of 8 Å. The structure shows BetPdeltaC45 as a trimer with each monomer consisting of 12 transmembrane alpha-helices. Protein termini and loop regions could not be determined due to the limited resolution of the map. Six of the twelve helices line a central cavity forming a potential substrate-binding chamber. Each monomer shows a central cavity in different sizes and shapes. Thus, the constitutively active BetPdeltaC45 thus forms an unusual asymmetric homotrimer. BetP most likely reflects three different conformational states of secondary transporters: the cytoplasmically open (C), the occluded (O), and the periplasmically open (P) states. The C and O states are similar to BetP WT projection structure, while the P state is discrepant and highly flexible due to the shape and size of the central cavity as well as the lowest intensity of the density. The observation of the P state corresponds well to the constitutively active property of BetPdeltaC45. For the high resolution structure of the C and O states are available, this work presents the first structural information of the P state of a secondary transporter.
The volume changes of lithium and sodium under pressure are discussed with respect to the packing density of the atoms and their valence. In densely packed Li I (bcc), Li II (fcc), and Li III (alpha-Hg ype), valence increases from 1 at ~ 5 GPa to ~ 2.5 at 40 GPa. The maximum valence 3 is attained in Li IV (body-centered cubic, 16 atoms per cell, packing density q = 0.965) at 47 GPa. In densely packed Na I (bcc) a linear increase of valence from 1 at ~ 10 GPa to 2.9 at 65 GPa is found which continues in Na II (fcc) up to 4.1 at 103 GPa.
The volume changes of solid iodine under pressure are discussed with respect to the packing density of the atoms and to valence. The packing density of solid iodine which is 0.805 under ambient pressure increases to 0.976 in monoatomic iodine-II, 0.993 in iodine-III, and 1 in fcc iodine-IV. Simultaneously, the valence increases from 1 in the free molecule to 1.78 in the crystal structure under ambient pressure, 2.72 – 2.81 in iodine-II, 2.86 – 2.96 in iodine-III, and 3 in fcc iodine-IV. The valence then remains constant up to about 180 GPa and rises moderately to 3.15 at the highest investigated pressure of 276 GPa. Parameters for calculating bond numbers, valences and atomic volumes of densely packed halogens, hydrogen, oxygen, and nitrogen are given.
The volume changes of cesium under pressure are discussed with respect to the packing density of the atoms and valence. The element is univalent in densely packed Cs I and Cs II. Valence increases in Cs III (packing density q = 0.973), in Cs IV (q = 0.943), in Cs V (q ~ 0.99), and in close packed Cs VI. The diminuition of volume beyond ~ 15 GPa is caused by this increase only which implies that electrons of the fifth shell act as valence electrons.
Relationships between bond lengths and bond numbers and also between atomic volumes and valencies are derived and parameters for their calculation are given for the s-block, p-block, and d-block metals. From the atomic volumes under pressure, the valencies of three solid lanthanoids have been confirmed or redetermined: La 3; Ce 2. 3. and 4; Yb 2 and 3.
Metallic radii rm are correlated with the ionic radii ri by linear relationships. For groups 1 up to 7 as well as for Al, Ga, In, Tl, Sn, and Pb the ionic radii refer to the maximum valences (oxidation states) as known from compounds according to rm ~ 1.16 x (ri + 0.64) [A° ]. For groups 8 up to 12, rm ~ 0.48 x (ri + 2.26) [°A] with valences W = 14 - G (G = group number). These valences are considered regular (Wr). For groups 1 up to 12, they obey the equation Wr = 7 - |G - 7|. According to this equation all outer s electrons and the unpaired d electrons should be involved in chemical bonding, i.e. in the cohesion of the element in the solid state. From the melting temperatures and the atomic volumes it is concluded, however, that only 19 out of the 30 d-block elements have regular valences, namely the elements of groups 3, 5, 6, 10, 11 as well as Os, Ir, Zn, Cd, and possibly Ru. All of the non-regular valences are lower than the regular ones. Four of them are integers: Mn 3; Fe, Co 4; Re 6.
[Nachruf] Walter Sterzel
(2014)
In recent publications Otto Hahn, last president of the Kaiser-Wilhelm-Gesellschaft, is charged with having favoured the Nazi regime, before World War II by politically purging institutes and suppressing Lise Meitner’s contribution to the discovery of nuclear fission, and during the war by contributing to the German war efforts, mainly to the development of nuclear weapons. These charges, however, which partly concern also the Kaiser-Wilhelm-Gesellschaft and some of their institutes are based on ignorance or disregard of the historical sources.
It is considered whether Fermat’s so called Last Theorem can be understood by substituting variables by polynomials and discussing their properties. The same substitution yields a survey of the Pythagorean Triples.
Background: Immigration has a strong impact on the development of health systems, medicine and science worldwide. Therefore, this article provides a descriptive study on the overall research output.
Methods: Utilizing the scientific database Web of Science, data research was performed. The gathered bibliometric data was analyzed using the established platform NewQIS, a benchmarking system to visualize research quantity and quality indices.
Findings: Between 1900 and 2016 a total of 6763 articles on immigration were retrieved and analyzed. 86 different countries participated in the publications. Quantitatively the United States followed by Canada and Spain were prominent regarding the article numbers. On comparing by additionally taking the population size into account, Israel followed by Sweden and Norway showed the highest performance. The main releasing journals are the Public Health Reports, the Journal of Immigrant and Minority Health and Social Science & Medicine. Over the decades, an increasing number of Public, Environmental & Occupational Health articles can be recognized which finally forms the mainly used subject area.
Conclusion: Considerably increasing scientific work on immigration cannot only be explained by the general increase of scientific work but is also owed to the latest development with increased mobility, worldwide crises and the need of flight and migration. Especially countries with a good economic situation are highly affected by immigrants and prominent in their publication output on immigration, since the countries’ publication effort is connected with the appointed expenditures for research and development. Remarkable numbers of immigrants throughout Europe compel medical professionals to consider neglected diseases, requires the public health system to restructure itself and finally promotes science.
We examine the photoinduced excited state dynamics of pyrene modified adenosine, a versatile probe for folding and hybridization of ribonucleic acids. Measurements in different solvents revealed complex ultrafast dynamics, but high robustness since the overall fluorescence quantum yield (Φf) is hardly affected. The result is a strong fluorescent RNA-probe whose spectral properties change in a defined way upon environmental changes.
In dieser Arbeit wurden zwei Themenblöcke bearbeitet. Zum einen der Aufbau und die Charakterisierung des Kerr-Schalters, einer Anlage zur Messung von Fluoreszenz mit einer Zeitauflösung im Femtosekundenbereich. Zum anderen die Charakterisierung von pyrenmodifizierten Nukleobasen, sowie deren Anwendung in einem neomycinbindenden Aptamer.
The radiative lifetimes of the C3Il-X3II transition of the CSi radical have been calculated from highly correlated electronic wavefunctions and compared with available experimental data. For this transition, the Franck-Condon approximation fails due to the strong R-dependency of the transition moment function.
The tetraaryl μ‐hydridodiborane(4) anion [2H]− possesses nucleophilic B−B and B−H bonds. Treatment of K[2H] with the electrophilic 9‐H‐9‐borafluorene (HBFlu) furnishes the B3 cluster K[3], with a triangular boron core linked through two BHB two‐electron, three‐center bonds and one electron‐precise B−B bond, reminiscent of the prominent [B3H8]− anion. Upon heating or prolonged stirring at room temperature, K[3] rearranges to a slightly more stable isomer K[3 a]. The reaction of M[2H] (M+=Li+, K+) with MeI or Me3SiCl leads to equimolar amounts of 9‐R‐9‐borafluorene and HBFlu (R=Me or Me3Si). Thus, [2H]− behaves as a masked [:BFlu]− nucleophile. The HBFlu by‐product was used in situ to establish a tandem substitution‐hydroboration reaction: a 1:1 mixture of M[2H] and allyl bromide gave the 1,3‐propylene‐linked ditopic 9‐borafluorene 5 as sole product. M[2H] also participates in unprecedented [4+1] cycloadditions with dienes to furnish dialkyl diaryl spiroborates, M[R2BFlu].
1H-detected solid-state NMR experiments feasible at fast magic-angle spinning (MAS) frequencies allow accessing 1H chemical shifts of proteins in solids, which enables their interpretation in terms of secondary structure. Here we present 1H and 13C-detected NMR spectra of the RNA polymerase subunit Rpo7 in complex with unlabeled Rpo4 and use the 13C, 15N, and 1H chemical-shift values deduced from them to study the secondary structure of the protein in comparison to a known crystal structure. We applied the automated resonance assignment approach FLYA including 1H-detected solid-state NMR spectra and show its success in comparison to manual spectral assignment. Our results show that reasonably reliable secondary-structure information can be obtained from 1H secondary chemical shifts (SCS) alone by using the sum of 1Hα and 1HN SCS rather than by TALOS. The confidence, especially at the boundaries of the observed secondary structure elements, is found to increase when evaluating 13C chemical shifts, here either by using TALOS or in terms of 13C SCS.
Chelidamic acid (4-hydroxypyridine-2,6-dicarboxylic acid) and 2,6-diaminopyridine react to form the title salt, C5H8N3+·C7H4NO5-; there are two formula units in the asymmetric unit. The pyridine N atom of 2,6-diaminopyridine is protonated whereas chelidamic acid is deprotonated at both carboxylate groups but protonated at the N atom; the reaction involves intra- and intermolecular proton transfer. In the crystal, each 2,6-diaminopyridinium cation participates in five strong N-H...O hydrogen bonds (including one bifurcated hydrogen bond). The crystal structure also features strong O-H...O hydrogen bonds between the chelidamate anions, leading to chains along the a axis.
The title co-crystal, C9H9NO2·C6H6O2, is composed of one 2,6-diacetylpyridine molecule and one resorcinol molecule as the asymmetric unit. In the 2,6-diacetylpyridine molecule, the two carbonyl groups are antiperiplanar to the pyridine N atom. In the crystal, the 2,6-diacetylpyridine and resorcinol molecules are connected by two O-H...O hydrogen bonds, forming planar chains of alternating components running along [120].
The soluble loop BC region guides, but not dictates, the assembly of the transmembrane cytochrome b6
(2017)
Studying folding and assembly of naturally occurring α-helical transmembrane proteins can inspire the design of membrane proteins with defined functions. Thus far, most studies have focused on the role of membrane-integrated protein regions. However, to fully understand folding pathways and stabilization of α–helical membrane proteins, it is vital to also include the role of soluble loops. We have analyzed the impact of interhelical loops on folding, assembly and stability of the heme-containing four-helix bundle transmembrane protein cytochrome b6 that is involved in charge transfer across biomembranes. Cytochrome b6 consists of two transmembrane helical hairpins that sandwich two heme molecules. Our analyses strongly suggest that the loop connecting the helical hairpins is not crucial for positioning the two protein “halves” for proper folding and assembly of the holo-protein. Furthermore, proteolytic removal of any of the remaining two loops, which connect the two transmembrane helices of a hairpin structure, appears to also not crucially effect folding and assembly. Overall, the transmembrane four-helix bundle appears to be mainly stabilized via interhelical interactions in the transmembrane regions, while the soluble loop regions guide assembly and stabilize the holo-protein. The results of this study might steer future strategies aiming at designing heme-binding four-helix bundle structures, involved in transmembrane charge transfer reactions.
Fibroblast growth factor receptor substrate 2 (FRS2α) is a signaling adaptor protein that regulates downstream signaling of many receptor tyrosine kinases. During signal transduction, FRS2 can be both tyrosine and threonine phosphorylated and forms signaling complexes with other adaptor proteins and tyrosine phosphatases. We have here identified flotillin-1 and the cbl-associated protein/ponsin (CAP) as novel interaction partners of FRS2. Flotillin-1 binds to the phosphotyrosine binding domain (PTB) of FRS2 and competes for the binding with the fibroblast growth factor receptor. Flotillin-1 knockdown results in increased Tyr phosphorylation of FRS2, in line with the inhibition of ERK activity in the absence of flotillin-1. CAP directly interacts with FRS2 by means of its sorbin homology (SoHo) domain, which has previously been shown to interact with flotillin-1. In addition, the third SH3 domain in CAP binds to FRS2. Due to the overlapping binding domains, CAP and flotillin-1 appear to compete for the binding to FRS2. Thus, our results reveal a novel signaling network containing FRS2, CAP and flotillin-1, whose successive interactions are most likely required to regulate receptor tyrosine kinase signaling, especially the mitogen activated protein kinase pathway.
Biacetylbis(methylimine) (1) is obtained by formic acid catalyzed condensation of biacetyl and methylamine. Photoelectron- and UV spectra, H NMR and 13C NMR data are compared with those of the new compound biacetylbis(isopropylimine) (2) and glyoxalbis(isopropylimine) (3).
Membrane proteins play vital role in a variety of cellular processes, such as signal transduction, transport and recognition. In turn they are involved in numerous human diseases and currently represent one of the most prevalent drug targets. A comprehensive understanding of the mechanisms mediated by membrane proteins requires information about their structures at near-atomic resolution, although structural studies of membrane proteins remain behind those of soluble proteins. A bottleneck in the study of membrane proteins resides in the difficulties that are encountered during their high-level production in cell based systems. However, many toxic effects attributed to the over production of membrane proteins are eliminated by cell-free expression, as viable host cells are no longer required. Therefore, the objective of this study was to obtain adequate amounts of selected membrane transport proteins for their structural studies using a cell-free expression system. For the establishment of the cell-free system for membrane proteins, the transporters YbgR and YiiP from Salmonella typhimurium LT2, PF0558 and PF1373 from Pyrococcus furiosus, from the cation diffusion family (CDF), BetP from Corynebacterium glutamicum from the betaine/carnitine/choline transporter (BCCT) family and Aq-2030 from Aquifex aeolicus VF5 from the monovalent cation/proton antiporter-2 (CPA2) family were selected. An Escherichia coli S-30 extract based cellfree system was established by generating the best expression constructs of the target proteins, preparing T7 RNA polymerase and an S-30 extract with high translation efficiency. The functionality of the S-30 extract was shown by the cell-free expression of correctly folded Green Fluorescent Protein (GFP). Essential factors of the cell-free system such as the Mg2+ concentration, the bacterial S-30 extract proportion in the reaction mixture and the time-course of cell-free reactions have been optimized. For the cell-free production of membrane proteins in soluble form, the possibility to supplement cell-free reactions with detergents was explored. A wide range of non-ionic or zwitterionic detergents, were found to be compatible with cell-free synthesis, while ionic detergents and non-ionic detergents at high concentrations had an inhibitory effect. Moreover, high concentrations of polyoxyethylene-alkyl-ethers (Brij) detergents were found to have enhancing effect on the production levels as well as on the solubility of cell-free produced proteins. As membrane proteins tend to misfold and aggregate in a membrane-free translation system, the possibility to supplement the cell-free reactions with inner membrane vesicles (IMVs) to obtain correctly folded target transport proteins was explored. All the target proteins were successfully produced in the batch cell-free reactions and were found to be incorporated in the IMVs. A continuous exchange cell-free (CECF) system was established, where consumable substrates (amino acids, nucleotides and energy regenerating compounds) were supplied to the cell-free reaction mixture through a dialysis membrane, which in consequence resulted in high-level production of target proteins compared to the batch system. The osmosensing and osmoregulated sodium-coupled symporter BetP from C. glutamicum was chosen for the large scale production in CECF set-up. The protein is easily produced in E. coli and is functional as assayed by its transport activity, after purification and reconstitution in liposomes. It is therefore possible to compare in-vivo and cell-free production. High-level cell-free production of BetP was achieved in CECF mode in different forms: (i) as precipitate, (ii) as soluble form in detergent, and (iii) incorporated in IMVs. Cell-free production of BetP resulted in the yield of about 0.5 mg of purified BetP from 1 ml of CECF reaction. The yield of purified BetP was increased to 1.6 fold by addition of 1% polyoxyethylene-(20)-cetyl-ether (Brij58) detergent in the reaction mixture. Moreover, the high level cell-free production of BetP (0.5 mg purified BetP/ml reaction mixture) incorporated in IMVs was shown for the first time in this work.However, it was observed that oligomerization of BetP was not efficient in the cell-free system. Factors that can promote the folding of membrane proteins such as lipids and chaperones were investigated. Addition of lipids and molecular chaperone GroE facilitated correct folding of BetP resulting in increased yield and stability of cell-free produced BetP. The results obtained indicate that most of the cell-free produced BetP exists in functional oligomeric form. The possibility of obtaining milligram amounts of BetP, a 12 trans-membrane protein from the cell-free reactions holds promise for structural and functional studies of other membrane proteins. In any case, the strategies adapted in this study should prove extremely valuable for the production of membrane proteins in the E. coli cell-free expression system.
Im Zuge der steigenden Bedeutung der Proteomforschung und der »Molekularisierung« der Medizin werden neue, effizientere Plattformen zur Untersuchung von Proteinen und deren Wechselwirkungen notwendig. Hier bietet die Nanotechnologie, eine Wissenschaft mit Ursprüngen in der Physik und der Halbleiterindustrie, attraktive Lösungsperspektiven. Ein Bereich der Forschung am Institut für Biochemie der Universität Frankfurt um Prof. Dr. Robert Tampé widmet sich den Aspekten der Nanotechnologie zur Entwicklung von Protein-Chips für die Proteomforschung und Erzeugung von Mustern im Kleinstformat.
First milestone of this Ph.D. thesis was the successful extension of conventional NTA/His-tag technique to self-assembling, multivalent chelator thiols for high-affinity recognition as well as stable and uniform immobilization of His-tagged proteins on chip surfaces. Bis-NTA was linked via an oligoethylene glycol to alkyl thiols by an efficient modular synthesis strategy yielding a novel, multivalent compound for formation of mixed SAMs with anti-adsorptive matrix thiols on gold. Multivalent chelator chips allow a specific, high-affinity, reversible, long-term immobilization of His-tagged proteins. In AFM studies reversibility of the specific protein immobilization process was visualized at single molecule level. The entire control over the orientation of the immobilized protein promotes this chip surface to an optimal platform for studies focusing on research targets at single molecule level and nanobiotechnology. Based on the constructed protein chip platform above and a novel AFM mode (contact oscillation mode, COM) – developed during the current Ph.D. work – protein nanolithography under physiological conditions enabling fabrication of active biomolecular patterns in countless variety has been established. Reversible COM-mediated nanostructuring is exceptionally suitable for multiplexed patterning of protein assemblies in situ. The first selfassembled protein layer acts as a biocompatible and ductile patterning material. Immobilized proteins can be replaced by the AFM tip applying COM, and the generated structures can be erased and refilled with different proteins, which are immobilized in a uniform and functional manner. Multi-protein arrays can be systematically fabricated by iterative erase-and-write processes, and employed for protein-protein interaction analysis. Fabrication of two-dimensionally arranged nanocatalytic centres with biological activity will establish a versatile tool for nanobiotechnology. As an alternative chip fabrication approach, the combined application of methodologies from surface chemistry, semiconductor technology, and chemical biology demonstrated successfully how pre-patterned templates for micro- and nanoarrays for protein chips are fabricated. The surface physical, as well the biophysical experiments, proved the functionality of this technology. The promises of such process technology are fast and economic fabrication of ready-to-use nanostructured biochips at industrial scale. Membrane proteins are complicated in handling and hence require sophisticated solutions for chip technological application. A silicon-on-insulator (SOI) chip substrate with microcavities and nanopores was employed for first technological investigation to construct a protein chip suitable for membrane proteins. The formation of an artificial lipid bilayer using vesicle fusion on oxidized SOI cavity substrates was verified by CLSM. Future AFM experiments will give further insights into the chip architecture and topography. This will provide last evidence of the sealing of the cavity by the lipid bilayer. Transmembrane proteins will be employed for reconstitution experiments on this membrane protein chip platform. Highly integrated microdevices will find application in basic biomedical and pharmaceutical research, whereas robust and portable point-of-care devices will be used in clinical settings.
Lineare sowie zyklische 3-Alkylpyridinalkaloide sind vor allem in Schwämmen der Ordnung Haplosclerida, zu der auch Haliclona viscosa zählt, weit verbreitet. Die Synthese der zuvor von C. Volk isolierten Haliclamine C und D, des Viscosamins und des Viscosalin C bildete den Ausgangspunkt dieser Arbeit.[1-4] Sie erfolgte ausgehend von den bekannten Synthesen der Cyclostellettamine und Haliclamine[5-7] und gliedert sich in drei Abschnitte: erstens Synthese eines ω-Hydroxyalkylpyridins aus einem Bromalkohol, zweitens Funktionalisierung der Monomere in Abhängigkeit der gewählten Methode zur Di- bzw. Trimerisierung und drittens Verknüpfung und gegebenenfalls Zyklisierung. Durch Anwendung und Weiterentwicklung der bekannten Synthesewege wurden so insgesamt 14 lineare Monomere, zwei zyklische Monomere, 16 Cyclostellettamine, zwei Isocyclostellettamine, sieben Haliclamine, fünf Viscosaline sowie Viscosamin[8] und ein Analogon mit Heptylkette hergestellt. Dieser synthetische Zugang ermöglichte es, sowohl den finalen Strukturbeweis für die zuvor isolierten Verbindungen zu erbringen, als auch durch die Analyse der Fragmentierungs-muster von synthetischen und natürlichen Verbindungen mehr über das Verhalten dieser Verbindungen unter MS-Bedingungen zu erfahren. Die so gewonnenen Erkenntnisse führten dazu, dass drei unbekannte Verbindungen ohne Isolierung der Reinsubstanz mit einer Kombination von MS- und HPLC-Daten identifiziert werden konnten. So konnten das erste monozyklische 3-Alkylpyridinalkaloid marinen Ursprungs und zwei neue Haliclamine identifiziert und synthetisiert werden Des Weiteren gelang es, für die von C. Volk isolierten, jedoch nicht identifizierten Verbindungen Strukturen zu ermitteln bzw. auf Grund der MS-Daten Strukturvorschläge zu machen. Die durch den synthetischen Zugang große Anzahl verfügbarer 3-Alkylpyridinalkaloide ermöglichte außerdem eine systematische Untersuchung über den Zusammenhang von biologischer Aktivität und Struktur. Die Ergebnisse der am Helmholtz Institut für Infektionsforschung durchgeführten Experimente zu den antibakteriellen sowie cytotoxischen Eigenschaften von natürlichen wie auch rein synthetischen 3-Alkylpyridinalkaloiden zeigten, dass die Aktivität sich schon beim Addieren bzw. Subtrahieren einer Methylengruppe in einer Alkylkette signifikant ändert. [1] C. A. Volk, M. Köck, Org. Lett. 2003, 5, 3567-3569. [2] C. A. Volk, M. Köck, Org. Biomol. Chem. 2004, 2, 1827-1830. [3] C. A. Volk, H. Lippert, E. Lichte, M. Köck, Eur. J. Org. Chem. 2004, 3154-3158. [4] C. A. Volk, Dissertation, Johann Wolfgang Goethe Universität (Frankfurt am Main), 2004. [5] A. Grube, C. Timm, M. Köck, Eur. J. Org. Chem. 2006, 1285-1295 und Referenzen darin. [6] J. E. Baldwin, D. R. Spring, C. E. Atkinson, V. Lee, Tetrahedron 1998, 54, 13655-13680. [7] A. Kaiser, X. Billot, A. Gateau-Olesker, C. Marazano, B. C. Das, J. Am. Chem. Soc. 1998, 120, 8026-8034. [8] C. Timm, M. Köck, Synthesis 2006, 2580-2584.
A new pseudopolymorph of perchlorinated neopentasilane: the benzene monosolvate Si(SiCl3)4·C6H6
(2020)
A new pseudopolymorph of dodecachloropentasilane, namely a benzene monosolvate, Si5Cl12·C6H6, is described. There are two half molecules of each kind in the asymmetric unit. Both Si5Cl12 molecules are completed by crystallographic twofold symmetry. One of the benzene molecules is located on a twofold rotation axis with two C—H groups located on this rotation axis. The second benzene molecule has all atoms on a general position: it is disordered over two equally occupied orientations. No directional interactions beyond normal van der Waals contacts occur in the crystal.
Background: Simple peak-picking algorithms, such as those based on lineshape fitting, perform well when peaks are completely resolved in multidimensional NMR spectra, but often produce wrong intensities and frequencies for overlapping peak clusters. For example, NOESY-type spectra have considerable overlaps leading to significant peak-picking intensity errors, which can result in erroneous structural restraints. Precise frequencies are critical for unambiguous resonance assignments.
Results: To alleviate this problem, a more sophisticated peaks decomposition algorithm, based on non-negative matrix factorization (NMF), was developed. We produce peak shapes from Fourier-transformed NMR spectra. Apart from its main goal of deriving components from spectra and producing peak lists automatically, the NMF approach can also be applied if the positions of some peaks are known a priori, e.g. from consistently referenced spectral dimensions of other experiments.
Conclusions: Application of the NMF algorithm to a three-dimensional peak list of the 23 kDa bi-domain section of the RcsD protein (RcsD-ABL-HPt, residues 688-890) as well as to synthetic HSQC data shows that peaks can be picked accurately also in spectral regions with strong overlap.
Adequate digital resolution and signal sensitivity are two critical factors for protein structure determinations by solution NMR spectroscopy. The prime objective for obtaining high digital resolution is to resolve peak overlap, especially in NOESY spectra with thousands of signals where the signal analysis needs to be performed on a large scale. Achieving maximum digital resolution is usually limited by the practically available measurement time. We developed a method utilizing non-uniform sampling for balancing digital resolution and signal sensitivity, and performed a large-scale analysis of the effect of the digital resolution on the accuracy of the resulting protein structures. Structure calculations were performed as a function of digital resolution for about 400 proteins with molecular sizes ranging between 5 and 33 kDa. The structural accuracy was assessed by atomic coordinate RMSD values from the reference structures of the proteins. In addition, we monitored also the number of assigned NOESY cross peaks, the average signal sensitivity, and the chemical shift spectral overlap. We show that high resolution is equally important for proteins of every molecular size. The chemical shift spectral overlap depends strongly on the corresponding spectral digital resolution. Thus, knowing the extent of overlap can be a predictor of the resulting structural accuracy. Our results show that for every molecular size a minimal digital resolution, corresponding to the natural linewidth, needs to be achieved for obtaining the highest accuracy possible for the given protein size using state-of-the-art automated NOESY assignment and structure calculation methods.
The adaptive immune system is able to detect and destroy cells that are malignantly transformed or infected by intracellular pathogens. Specific immune responses against these cells are elicited by antigenic peptides that are presented on major histocompatibility complex class I (MHC I) molecules and recognized by cytotoxic T lymphocytes at the cell surface. Since these MHC I-presented peptides are generated in the cytosol by proteasomal protein degradation, they can be metaphorically described as a window providing immune cells with insights into the state of the cellular proteome. A crucial element of MHC I antigen presentation is the peptide-loading complex (PLC), a multisubunit machinery, which contains as key constituents the transporter associated with antigen processing (TAP) and the MHC I-specific chaperone tapasin (Tsn). While TAP recognizes and shuttles the cytosolic antigenic peptides into the endoplasmic reticulum (ER), Tsn samples peptides in the ER for their ability to form stable complexes with MHC I, a process called peptide proofreading or peptide editing. Through its selection of peptides that improve MHC I stability, Tsn contributes to the hierarchy of immunodominant peptide epitopes. Despite the fact that it concerns a key event in adaptive immunity, insights into the catalytic mechanism of peptide proofreading carried out by Tsn have only lately been gained via biochemical, biophysical, and structural studies. Furthermore, a Tsn homolog called TAP-binding protein-related (TAPBPR) has only recently been demonstrated to function as a second MHC I-specific chaperone and peptide proofreader. Although TAPBPR is PLC-independent and has a distinct allomorph specificity, it is likely to share a common catalytic mechanism with Tsn. This review focuses on the current knowledge of the multivalent protein–protein interactions and the concomitant dynamic molecular processes underlying peptide-proofreading catalysis. We do not only derive a model that highlights the common mechanistic principles shared by the MHC I editors Tsn and TAPBPR, and the MHC II editor HLA-DM, but also illustrate the distinct quality control strategies employed by these chaperones to sample epitopes. Unraveling the mechanistic underpinnings of catalyzed peptide proofreading will be crucial for a thorough understanding of many aspects of immune recognition, from infection control and tumor immunity to autoimmune diseases and transplant rejection.
Members of the ATP‐binding cassette (ABC) transporter superfamily translocate a broad spectrum of chemically diverse substrates. While their eponymous ATP‐binding cassette in the nucleotide‐binding domains (NBDs) is highly conserved, their transmembrane domains (TMDs) forming the translocation pathway exhibit distinct folds and topologies, suggesting that during evolution the ancient motor domains were combined with different transmembrane mechanical systems to orchestrate a variety of cellular processes. In recent years, it has become increasingly evident that the distinct TMD folds are best suited to categorize the multitude of ABC transporters. We therefore propose a new ABC transporter classification that is based on structural homology in the TMDs:
The title compound, C(21)H(18)ClN, was synthesized by an enanti-oselective Brønsted acid-catalysed transfer hydrogenation reaction. The six-membered heterocycle adopts a half-chair conformation. It has the biphenyl residue in an axial position. The two rings of the biphenyl residue are almost coplanar [dihedral angle = 2.65 (9)°]. The crystal packing is stabilized by N-H⋯Cl hydrogen bonds, which connect the mol-ecules into chains running along the a axis.
Die vorliegende Arbeit befasst sich mit der Entwicklung von neuen enantioselektiven und diastereoselektiven Brønsted-Säure katalysierten Reaktionen. Das Aktivierungsprinzip entspricht dabei einer klassischen Säure-Base-Reaktion, in der eine Brønsted-Säure einen Elektronenpaar-Donor protoniert, woraus die Bildung eines Ionenpaares resultiert. Erweitert man dieses Konzept durch den Einsatz einer chiralen Protonenquelle und verwendet als Base ein prochirales Substrat, wie ein Imin, so entsteht durch dessen Protonierung ein chirales Ionenpaar, wodurch das Substrat einerseits aktiviert wird und anderseits asymmetrische Induktion über das chirale Anion erfährt. Greift in dem darauf folgenden Schritt ein Nucleophil selektiv über eine Seite des positiv geladenen Elektrophils an, so bildet sich enantioselektiv ein neues Stereozentrum. Die Natur nutzt dieses Prinzip zum Aufbau von optisch reinen α-Aminosäuren. So katalysiert die Glutamatdehydrogenase (GDH) die Darstellung von Glutaminsäure durch Protonierung des entsprechenden α-Iminoglutarats, wodurch der nachfolgende Hydrid-Angriff mittels Nicotinamidadenindinukleotid (NADH) selektiv die (L)-Aminosäure liefert. Dieses Konzept konnte während der eigenen Diplomarbeit auf die enantioselektive Brønsted-Säure katalysierte Transferhydrierung von Ketiminen übertragen werden. Dabei simuliert eine chirale Protonenquelle 1 das Enzym (GDH) und das Reduktionsmittel NADH wird durch ein synthetisches Analogon, das Hantzsch Dihydropyridin 8a ersetzt ... Die vorliegende Arbeit ist kumulativ verfasst. Der größte Teil der hier vorgestellten Ergebnisse ist bereits veröffentlicht oder zur Publikation eingereicht. Die experimentellen Daten sind Bestandteil der in Kapitel 10 aufgeführten Publikationen und werden nicht gesondert diskutiert. Folgende Teile dieser Arbeit wurden bereits veröffentlicht: Highly Enantioselective Organocatalytic Carbonyl-Ene Reaction with strongly Acid, Chiral Brønsted Acids as Efficient Catalysts Rueping M., Theissmann T., Kuenkel A., Koenigs R.M., Angewandte Chemie International Edition 2008, 47, 6798, Angewandte Chemie 2008, 120, 6903. Asymmetric counterion pair catalysis: An enantioselective Brønsted acid-catalyzed protonation Rueping M., Theissmann T., Raja S., Bats J.W., Advanced Synthesis & Catalysis 2008, 350, 1001. An enantioselective chiral brønsted acid catalyzed imino-azaenamine reaction Rueping M., Sugiono E., Theissmann T., Kuenkel A., Köckritz A., Pews-Davtyan A., Nemati N., Beller M., Organic Letters 2007, 9, 1065. Remarkably low catalyst loading in Brønsted acid catalyzed transfer hydrogenations: Enantioselective reduction of benzoxazines, benzothiazines, and benzoxazinones Rueping M., Antonchick A.P., Theissmann T., Angewandte Chemie International Edition 2006, 45, 6751, Angewandte Chemie 2006, 118, 6903. A highly enantioselective brønsted acid catalyzed cascade reaction: Organocatalytic transfer hydrogenation of quinolines and their application in the synthesis of alkaloids Rueping M., Antonchick A.P., Theissmann T., Angewandte Chemie International Edition 2006, 45, 3683, Angewandte Chemie 2006, 118, 3765. Metal-free Brønsted acid catalyzed transfer hydrogenation - New organocatalytic reduction of quinolines Rueping M., Theissmann, T., Atonchick A.P., Synlett 2006, 1071. The twinned crystal structure of diiodobis(triphenylphosphine) palladium(II) dichloromethane disolvate at 173 K Theissmann T., Bolte M., Acta Crystallographica Section E, 2006, E62, 1056. Folgende Manuskripte wurden zur Veröffentlichung eingereicht: First Enantioselective Chiral Brønsted Acid Catalyzed Synthesis of 4´-Substituted Tetrahydroquinolines Rueping M., Theissmann T., Stoeckel M., Atonchick A.P. Asymmetric Organocatalytic Reductions in the Enantioselective Synthesis of Fluoroquinolones, Flumiquine and Levofloxacin Rueping M, Stoeckel M., Theissmann T., Haack K. Synthesis and Structural Investigations of H8-BINOL-derived N-triflylphosphoramides Rueping M., Nachtsheim B.J., Koenigs R., Ieawsuwan W., Theissmann T. Buchbeitrag: Metal-free Brønsted Acid Catalyzed Transfer-Hydrogenation: Enantioselective Synthesis of Tetrahydroquinolines Rueping M., Theissmann T., Atonchick A.P., Catalysts for Fine Chemical Industry, Vol. 5, 2006
The field of dynamic nuclear polarization has undergone tremendous developments and diversification since its inception more than 6 decades ago. In this review we provide an in-depth overview of the relevant topics involved in DNP-enhanced MAS NMR spectroscopy. This includes the theoretical description of DNP mechanisms as well as of the polarization transfer pathways that can lead to a uniform or selective spreading of polarization between nuclear spins. Furthermore, we cover historical and state-of-the art aspects of dedicated instrumentation, polarizing agents, and optimization techniques for efficient MAS DNP. Finally, we present an extensive overview on applications in the fields of structural biology and materials science, which underlines that MAS DNP has moved far beyond the proof-of-concept stage and has become an important tool for research in these fields.
Das Ziel von Gentherapie ist die Behandlung bzw. Heilung einer Erkrankung durch das Einbringen eines oder mehrerer Gene. Dazu werden Gentransfervektoren benötigt, die effizient therapeutische Gene in die zu behandelnden Zellen einbringen. Für eine systemische Applikation müssen Gentransfervektoren die Eigenschaft besitzen, ausschließlich die erkrankten Zellen zu transduzieren. Der Tropismus retroviraler Vektoren wird durch das Envelopeprotein (Env) festgelegt. Maus Leukämie Virus (MLV) basierende Kapsidpartikel können mit dem Envelopeprotein des humanen Immundefizienzvirus Typ-1 (HIV-1) pseudotypisiert werden. Diese MLV/HIV-1 Pseudotypvektoren besitzen einen Tropismus für humane CD4 positive T-Helferzellen. Diese Vektoren sind geeigneten Kandidaten für die gen-therapeutische Behandlung der HIV-lnfektion und von kutanen T-Zell Lymphomen, einer lymphproliferativen Erkrankung von CD4 Zellen. Im ersten Teil dieser Arbeit wurden MLV/HIV Pseudotypvektoren exprimierende Verpackungszelllinien mit Hüllproteinen verschiedener Subtypen etabliert und charakterisiert. Die verwendeten Subtypen waren das T-trophe HIV-1 Isolat BH10, das T-trophe HIV-2 Isolat ISY und das dualotrophe SHIV Isolat 89.6P. Dabei zeigte sich eine Abhängigkeit der Vektortiter vom Subtyp. Die höchsten Titer wurden mit der MLV/HIV-1 Pseudotypvektoren exprimierenden Verpackungszelllinie FLY-HIV-87 erhalten und lagen in Abhängigkeit vom retroviralen Vektor zwischen 1 x 10 hoch 5 und 1 x 10 hoch 6 IU/ml. Die Transduktionsspezifität entsprach dem Korezeptorgebrauch des HIV-Subtyps. Da für die geplanten in vivo Experimente höhere Titer notwendig waren, wurden verschiedene Methoden zur Anreicherung MLV/HIV-1 pseudotypisierter Vektoren zunächst getestet, sowie die Beste dieser Methoden für die Konzentrierung der Partikel optimiert. Im zweiten Teil dieser Arbeit wurde an zwei Mausmodellen die in vivo Applikation MLV/HIV-1 pseudotypisierter Vektoren untersucht. An transgenen hCD4 Mäusen wurde der Gentransfer nach systemischer Applikation von MLV/HIV-1 LacZ Pseudotypvektoren untersucht. In den transduzierten Mäusen konnte Gentransfer in Lymphknoten und Thymus beobachtet werden. Durch subkutane Implantation der humanen kutanen T-Zell Lymphomzellen MyLa in Nacktmäuse wurde ein Tiermodell Modell für humane kutane T-Zell Lymphome etabliert. Die intratumorale Applikation von MLV/HIV-1 Partikeln, deren Vektorgenom für das grüne Fluoreszenzprotein (EGFP) kodiert ergab, daß es zum effektiven und spezifischen Gentransfer in die CD4 positiven MyLa Zellen kam. In dem anschließend durchgeführte Therapieversuch mit Herpes Simplex Virus Thymidinkinase kodierenden Vektoren und darauf folgender systemischer Ganciclovir Behandlung konnte eine Verlangsamung des Tumorwachstums erzielt werden Die Ergebnisse der vorliegenden Arbeit haben gezeigt, daß MLV/HIV-1 Pseudotypvektoren für den spezifischen und effizienten Transfer von Genen in primäre humane CD4 T-Helferzellen geeignet sind und daß sowohl die systemische als auch die intratumorale Applikation dieser Vektoren möglich ist.
A theory of the luminescence lifetime of a radiation-damped classical electrical point dipole near a plane interface to a medium with different optical constants is given. The influence of the interface on the lifetime of the dipole is calculated in first approximation with the methods of molecular optics. Theoretical and experimental results for a purely dielectric interface are compared.
Azulen: Für die Orientierungsfehlordnung im Azulen werden mit Kraftfeld-Methoden sowie mit quantenmechanischen Methoden an einem Satz geordneter Kristallstrukturmodelle Gitterenergieminimierung durchgeführt. Die Modelle zeigen sehr ähnliche Gitterenergien. Keine signifikante Nahordnung ist zu erkennen. Es liegt eine statistische Orientierungsfehlordnung vor. Die Auslenkungsparameter in der experimentellen Kristallstruktur werden durch die Überlagerung der berechneten Atompositionen gut reproduziert.
Perinon-Pigmente P.R. 194, P.O. 43 und V.R. 14: Für das cis-Isomer (P.R. 194), das trans-Isomer (P.O. 43) und den Mischkristall (V.R. 14) der Perinone werden geordnete Kristallstrukturmodelle aufgestellt und Gitterenergieminimierung mit Kraftfeld-Methoden sowie quantenmechanischen Methoden durchgeführt.
In der Orientierungsfehlordnung von P.R. 194 zeigen sich kurze Korrelationsreichweiten für alle Richtungen. Die Lokalstruktur wird über Variationen der exakten Positionen und Orientierungen der Moleküle beschrieben. Die experimentellen Auslenkungsparameter werden durch Überlagerung berechneter Atompositionen reproduziert.
Für trans-Perinon sind keine Hinweise auf eine Fehlordnung zu erkennen.
Im Mischkristall der beiden Isomere (Küpenfarbstoff V.R. 14) liegen eine Positions- und eine Orientierungsfehlordnung vor. Quantenmechanische Gitterenergieoptimierungen zeigen zwei Bandbreiten der Gitterenergie für geordnete Kristallstrukturmodelle, getrennt anhand der Orientierung der Moleküle des trans-Isomers. Die ungewöhnlichen experimentellen Auslenkungsparameter und Positionen der Atome werden ebenfalls durch die Überlagerung berechneter Atompositionen gut reproduziert.
Die Nachbarschaftswahrscheinlichkeiten werden über eine statistische Auswertung der Häufigkeiten einzelner Nachbarschaften genähert beschrieben und zeigen stark anisotrope Präferenzen. Die intermolekularen Wechselwirkungen werden mit Kraftfeldmethoden qualitativ charakterisiert und zeigen eine zu den Nachbarschaftswahrscheinlichkeiten sehr ähnliche Anisotropie.
PTCBI: Im cis-Isomer von PTCBI beobachtet man eine dem P.R. 194 ähnliche Orientierungsfehlordnung. Anhand der Ergebnisse der Gitterenergieminimierungen wird eine statistische Fehlordnung angenommen.
Für das trans-Isomer von PTCBI findet man durch Gitterenergieminimierungen ein theoretisches energetisch ungünstiges Polymorph in der Raumgruppe P 21/c.
Für den PTCBI-Mischkristall wird aus der Auswertung von Röntgenpulverdiagrammen eine zum cis-Isomer isotype Struktur abgeleitet. Für diese Struktur wird eine dem V.R. 14 ähnliche Positions- und Orientierungsfehlordnung untersucht. In der statistischen Auswertung der Gitterenergien zeigen alle Modelle vergleichbare und gleichzeitig sehr niedrige relative Wahrscheinlichkeiten. Für die Lokalstruktur sind keine klaren Präferenzen für bestimmte Motive erkennbar. Im PTCBI-Mischkristall wird eine nahezu statistische Fehlordnung erwartet. Die Wechselwirkungen der geordneten zentralen Kohlenstoffgerüste der Perylen-Tetracarbonsäure bestimmen die Packung in cis-PTCBI und im PTCBI-Mischkristall.
P.R. 170: Die Struktur der β-Phase von Pigment Rot 170 besteht aus geordneten Schichten. Die Komponente des Translationsvektors zwischen den Schichten in b-Richtung beträgt entweder ty = +0,421 oder ty = -0,421. Die Abfolge der Translationsvektoren ist weder periodisch noch völlig zufällig.
Gitterenergieminimierungen an kombinatorisch vollständigen Sätzen geordneter Modelle mit einem maßgeschneiderten Kraftfeld werden durchgeführt. Erhaltene Gitterenergien erlauben die Beschreibung der Lokalstruktur durch bevorzugte Stapelsequenzen. Darin beeinflussen die nächsten und übernächsten Nachbarn die Energie und die Geometrie einer einzelnen Schicht.
Relative Wahrscheinlichkeiten (respektive der Entartungen) für endliche lokale Motive werden mit der Boltzmann-Statistik berechnet. So tritt das Motiv + + − mit einer Wahrscheinlichkeit von ca. 61,4% auf, während das Motiv − + − mit einer Wahrscheinlichkeit von ca. 23,3% wesentlich seltener erscheint. Das Motiv + + + ist mit der Wahrscheinlichkeit von ca. 15,3% am seltensten. Mit diesen relativen Wahrscheinlichkeiten werden Strukturmodelle in Superzellen mit bis zu 100 aufeinanderfolgenden Schichten aufgebaut und zur Simulation der Röntgenbeugungsdaten verwendet. Damit werden Pulver- wie Einkristalldaten gut reproduziert, inklusive der diffusen Streuung.
Septulen: Für Septulen werden Unterschiede in der Konformation der Moleküle zwischen der Gasphase und dem Festkörper beobachtet. Berechnungen der Einzelmolekülenergien sowie Gitterenergieminimierungen werden mit rigiden sowie flexiblen Molekülen für beide Konformationen durchgeführt. Die Konformationsänderung zwischen Gasphase und Festkörper bedeutet einen Verlust an Energie, welcher durch die günstigere Packung und durch den Gewinn an Gitterenergie wettgemacht wird. Ähnlich günstige Gitterenergien wurden für die Gasphasen-Konformation nicht gefunden.
Ionenkanäle bilden therapeutische Schlüsselstellen für viele Erkrankungen und sind daher vor allem für die pharmakologische und medizinische Forschung von herausragender Bedeutung. Der Forschungsbedarf ist enorm und dementsprechend groß auch die Nachfrage nach elektrophysiologischen Systemen, die eine Analyse von Ionenkanälen und/oder Wirkstoffen im Hochdurchsatz erlauben. Derzeitige Hochdurchsatzsysteme basieren zumeist auf modifizierten Patch-Clamp-Verfahren, weisen aber im Vergleich zu manuellen Patch-Clamp-Systemen noch einige Nachteile auf. In der vorliegenden Arbeit wurde daher im Rahmen eines vom Bundesministerium für Bildung und Forschung geförderten BioChancePlus-Projektes eine alternative Methode, die Fakir-Methode, entwickelt und ihre Einsatzmöglichkeit in Hochdurchsatzsystemen evaluiert. Bei der Fakir-Methode werden Zellen in einem inhomogenen, elektrischen Wechselfeld mit Hilfe dielektrophoretischer Kräfte zu Metallnanoelektroden hin beschleunigt, aufgrund ihrer Bewegungsenergie von letzteren penetriert und dadurch elektrisch kontaktiert. Dies ermöglicht die anschließende, intrazelluläre Messung in physiologischer Lösung. Im Vergleich zur Patch-Clamp-Methode hat die Fakir-Methode die Vorteile, dass das Zytoplasma der Zelle erhalten bleibt und dass mit einer geringen Zelldichte gearbeitet werden kann. Auf der anderen Seite polarisiert die Elektrode schnell und die genaue, intrazelluläre Zusammensetzung während der Messung ist nicht bekannt. Für die Realisierung der Fakir-Methode im Experiment wurde eine Mikrofluidikkammer mit austauschbaren Metallmikro- und Metallnanoelektroden- Chips entwickelt, die die mikroskopische Beobachtung des Kontaktierungsprozesses ermöglichte. Die Charakterisierung der Elektroden erfolgte sowohl durch Potentialmessungen als auch mit Hilfe von Impedanzspektroskopie. Um die dielektrophoretische Attraktion von Zellen genauer steuern zu können, wurde zudem ein Amplitudenmodulator entwickelt. Zellen konnten sowohl einzeln, als auch in Gruppen kontaktiert werden. Intrazelluläre Potentialmessungen von HEK293-Zellen, die den blaulichtgesteuerten Kationenkanal Channelrhodopsin-2 (ChR2) exprimierten, zeigten, dass mit Hilfe der Fakir-Methode von Membranproteinen verursachte Spannungsänderungen gemessen werden können. Beim Fakir-Modell auftretende Schwierigkeiten wurden analysiert und die Ergebnisse genutzt, um ein Konzept für eine hochreproduzierbare Herstellung von Nanoelektroden-Arrays unter Verwendung der 2-Photonenpolymerisations- Technolgie (2PP) zu entwerfen. Für den Einsatz als Biosensoren sind große Zellen besonders geeignet. Eine effektive Vergrößerung von Zellen kann durch die Multi-cell-Elektrofusion erreicht werden. Diese Art der Herstellung von Riesenzellen ist insbesondere deshalb so interessant, weil die Elektrofusion problemlos in ein automatisiertes Mikrofluidiksystem eingebunden werden kann. Neben HEK293-Zellen konnten nach Entwicklung geeigneter Protokolle für die Herstellung von Protoplasten auch Saccharomyces cerevisiae und Pichia pastoris zu Riesenzellen elektrofusioniert werden. Solche Riesenzellen wurden im Rahmen dieser Arbeit biophysikalisch charakterisiert. Neben Kapazitätsmessungen zeigten sowohl die Expression von YFP in den Membranen als auch die Verwendung von fluoresceinhaltiger Patch-Clamp- Pipettenlösung, dass es sich bei den Riesenzellen um einheitliche Kompartimente handelte und somit die gesamte Membranfläche für elektrophysiologische Experimente zur Verfügung stand. Vergleichende Patch-Clamp-Messungen von ChR2-exprimierenden Ursprungs- und Riesenzellen ergaben nicht nur, dass das überexprimierte Protein auch nach der Elektrofusion noch funktional war, sondern auch, dass die Expressionsdichte unverändert blieb. Damit bilden elektrofusionierte Riesenzellen weit über ihre Einsatzmöglichkeiten in Hochdurchsatzsystemen hinaus ein vielversprechendes Werkzeug, um zum Beispiel elektrogene Membranproteine mit geringer Stromamplitude nachzuweisen oder in der giant-inside-out- Konfiguration elektrophysiologische Messungen durchzuführen. Lipophile Anionen können eingesetzt werden, um die elektrischen Eigenschaften der Membranen zu verändern und die Zellstabiliät während des Elektromanipulationsprozesses zu verbessern. Daher wurde für vier verschiedene lipophile Anionen die Spannungsabhängigkeit der Erhöhung der spezifischen Membrankapazität in Patch- Clamp-Experimenten mit HEK293-Zellen analysiert.
DCD – a novel plant specific domain in proteins involved in development and programmed cell death
(2005)
Background: Recognition of microbial pathogens by plants triggers the hypersensitive reaction, a common form of programmed cell death in plants. These dying cells generate signals that activate the plant immune system and alarm the neighboring cells as well as the whole plant to activate defense responses to limit the spread of the pathogen. The molecular mechanisms behind the hypersensitive reaction are largely unknown except for the recognition process of pathogens. We delineate the NRP-gene in soybean, which is specifically induced during this programmed cell death and contains a novel protein domain, which is commonly found in different plant proteins.
Results: The sequence analysis of the protein, encoded by the NRP-gene from soybean, led to the identification of a novel domain, which we named DCD, because it is found in plant proteins involved in d evelopment and c ell d eath. The domain is shared by several proteins in the Arabidopsis and the rice genomes, which otherwise show a different protein architecture. Biological studies indicate a role of these proteins in phytohormone response, embryo development and programmed cell by pathogens or ozone.
Conclusion: It is tempting to speculate, that the DCD domain mediates signaling in plant development and programmed cell death and could thus be used to identify interacting proteins to gain further molecular insights into these processes.
Potassium homeostasis is vital for all organisms, but is challenging in single-celled organisms like bacteria and yeast and immobile organisms like plants that constantly need to adapt to changing external conditions. KUP transporters facilitate potassium uptake by the co-transport of protons. Here, we uncover the molecular basis for transport in this widely distributed family. We identify the potassium importer KimA from Bacillus subtilis as a member of the KUP family, demonstrate that it functions as a K+/H+ symporter and report a 3.7 Å cryo-EM structure of the KimA homodimer in an inward-occluded, trans-inhibited conformation. By introducing point mutations, we identify key residues for potassium and proton binding, which are conserved among other KUP proteins.
The title compound, C4H9N5O2+·SO42−·H2O, is the monohydrate of the commercially available compound `C4H7N5O·H2SO4·xH2O'. It is obtained by reprecipitation of C4H7N5O·H2SO4·xH2O from dilute sodium hydroxide solution with dilute sulfuric acid. The crystal structure of anhydrous 2,4,5-triamino-1,6-dihydropyrimidin-6-one sulfate is known, although called by the authors 5-amminium-6-amino-isocytosinium sulfate [Bieri et al. (1993[Bieri, J. H., Prewo, R. & Linden, A. (1993). Private communication (refcode HACDEU). CCDC, Cambridge, England]). Private communication (refcode HACDEU). CCDC, Cambridge, England]. In the structure, the sulfate group is deprotonated, whereas one of the amino groups is protonated (R2C—NH3+) and one is rearranged to a protonated imine group (R2C=NH2+). This arrangement is very similar to the known crystal structure of the anhydrate. Several tautomeric forms of the investigated molecule are possible, which leads to questionable proton attributions. The measured data allowed the location of all hydrogen atoms from the residual electron density. In the crystal, ions and water molecules are linked into a three-dimensional network by N—H⋯O and O—H⋯O hydrogen bonds.
First crystal structure of a Pigment Red 52 compound: DMSO solvate hydrate of the monosodium salt
(2021)
Pigment Red 52, Na2[C18H11ClN2O6S], is an industrially produced hydrazone-laked pigment. It serves as an intermediate in the synthesis of the corresponding Ca2+ and Mn2+ salts, which are used commercially for printing inks and lacquers. Hitherto, no crystal structure of any salt of Pigment Red 52 is known. Now, single crystals have been obtained of a dimethyl sulfoxide solvate hydrate of the monosodium salt of Pigment Red 52, namely, monosodium 2-[2-(3-carboxy-2-oxo-1,2-dihydronaphthalen-1-ylidene)hydrazin-1-yl]-5-chloro-4-methylbenzenesulfonate dimethyl sulfoxide monosolvate monohydrate, Na+·C18H12ClN2O6S−·H2O·C2H6OS, obtained from in-house synthesized Pigment Red 52. The crystal structure was determined by single-crystal X-ray diffraction at 173 K. In this monosodium salt, the SO3− group is deprotonated, whereas the COOH group is protonated. The residues form chains via ionic interactions and hydrogen bonds. The chains are arranged in polar/non-polar double layers.