333.7 Natürliche Ressourcen, Energie und Umwelt
Refine
Year of publication
- 2021 (12) (remove)
Document Type
- Article (9)
- Doctoral Thesis (2)
- Preprint (1)
Language
- English (12) (remove)
Has Fulltext
- yes (12)
Is part of the Bibliography
- no (12)
Keywords
- Crustacea (1)
- Excretion (1)
- Freshwater Ecosystems (1)
- Freshwater invertebrate (1)
- IUCN protection categories (1)
- Mediterranean plants (1)
- Microplastic (1)
- Neocaridina palmata (1)
- Organic micropollutants (1)
- Polymer (1)
Institute
An increasing number of voices highlight the need for science itself to transform and to engage in the co-production of knowledge and action, in order to enable the fundamental transformations needed to advance towards sustainable futures. But how can global sustainability-oriented research networks engage in co-production of knowledge and action? The present article introduces a strategic tool called the ‘network compass’ which highlights four generic, interrelated fields of action through which networks can strive to foster co-production. It is based on the networks’ particular functions and how these can be engaged for co-production processes. This tool aims to foster self-reflection and learning within and between networks in the process of (re)developing strategies and activity plans and effectively contributing to sustainability transformations.
Bisphenols and phthalates, chemicals frequently used in plastic products, promote obesity in cell and animal models. However, these well-known metabolism disrupting chemicals (MDCs) represent only a minute fraction of all compounds found in plastics. To gain a comprehensive understanding of plastics as a source of exposure to MDCs, we characterized all chemicals present in 34 everyday products using nontarget high-resolution mass spectrometry and analyzed their joint adipogenic activities by high-content imaging. We detected 55,300 chemical features and tentatively identified 629 unique compounds, including 11 known MDCs. Importantly, chemicals that induced proliferation, growth, and triglyceride accumulation in 3T3-L1 adipocytes were found in one third of the products. Since the majority did not target peroxisome proliferator-activated receptor γ, the effects are likely to be caused by unknown MDCs. Our study demonstrates that daily-use plastics contain potent mixtures of MDCs and can, therefore, be a relevant yet underestimated environmental factor contributing to obesity.
Teaser Plastics contain a potent mixture of chemicals promoting adipogenesis, a key process in developing obesity.
Non-technical summary: There has been a long history of conflicts, studies, and debate over how to both protect rivers and develop them sustainably. With a pause in new developments caused by the global pandemic, anticipated further implementation of the Paris Agreement and high-level global climate and biodiversity meetings in 2021, now is an opportune moment to consider the current trajectory of development and policy options for reconciling dams with freshwater system health. Technical summary: We calculate potential loss of free-flowing rivers (FFRs) if proposed hydropower projects are built globally. Over 260,000 km of rivers, including Amazon, Congo, Irrawaddy, and Salween mainstem rivers, would lose free-flowing status if all dams were built. We propose a set of tested and proven solutions to navigate trade-offs associated with river conservation and dam development. These solution pathways are framed within the mitigation hierarchy and include (1) avoidance through either formal river protection or through exploration of alternative development options; (2) minimization of impacts through strategic or system-scale planning or re-regulation of downstream flows; (3) restoration of rivers through dam removal; and (4) mitigation of dam impacts through biodiversity offsets that include restoration and protection of FFRs. A series of examples illustrate how avoiding or reducing impacts on rivers is possible – particularly when implemented at a system scale – and can be achieved while maintaining or expanding benefits for climate resilience, water, food, and energy security. Social media summary: Policy solutions and development pathways exist to navigate trade-offs to meet climate resilience, water, food, and energy security goals while safeguarding FFRs.
The ingestion of microplastics (MPs) is well documented for various animals and spherical MPs (beads) in many studies. However, the retention time and egestion of MPs have been examined less, especially for irregular MPs (fragments) which are predominantly found in the environment. Furthermore, the accumulation of such particles in the gastrointestinal tract is likely to determine whether adverse effects are induced. To address this, we investigated if the ingestion and egestion of beads are different to those of fragments in the freshwater shrimp Neocaridina palmata. Therefore, organisms were exposed to 20–20,000 particles L−1 of either polyethylene (PE) beads (41 μm and 87 μm) or polyvinyl chloride (PVC) fragments (<63 μm). Moreover, shrimps were exposed to 20,000 particles L−1 of either 41 μm PE and 11 μm polystyrene (PS) beads or the PVC fragments for 24 h, followed by a post-exposure period of 4 h to analyze the excretion of particles. To simulate natural conditions, an additional fragment ingestion study was performed in the presence of food. After each treatment, the shrimps were analyzed for retained or excreted particles. Our results demonstrate that the ingestion of beads and fragments were concentration-dependent. Shrimps egested 59% of beads and 18% of fragments within 4 h. Particle shape did not significantly affect MP ingestion or egestion, but size was a relevant factor. Medium- and small-sized beads were frequently ingested. Furthermore, fragment uptake decreased slightly when co-exposed to food, but was not significantly different to the treatments without food. Finally, the investigations highlight that the assessment of ingestion and egestion rates can help to clarify whether MPs remain in specific organisms and, thereby, become a potential health threat.
National Greenhouse Gas Inventories (GHGI) are submitted annually to the United Nations Framework Convention on Climate Change (UNFCCC). They are estimated in compliance with Intergovernmental Panel on Climate Change (IPCC) methodological guidance using activity data, emission factors and facility-level measurements. For some sources, the outputs from these calculations are very uncertain. Inverse modelling techniques that use high-quality, long-term measurements of atmospheric gases have been developed to provide independent verification of national GHGI. This is considered good practice by the IPCC as it helps national inventory compilers to verify reported emissions and to reduce emission uncertainty. Emission estimates from the InTEM (Inversion Technique for Emissions Modelling) model are presented for the UK for the hydrofluorocarbons (HFCs) reported to the UNFCCC (HFC-125, HFC-134a, HFC-143a, HFC-152a, HFC-23, HFC-32, HFC-227ea, HFC-245fa, HFC-43-10mee and HFC-365mfc). These HFCs have high Global Warming Potentials (GWPs) and the global background mole fractions of all but two are increasing, thus highlighting their relevance to the climate and a need for increasing the accuracy of emission estimation for regulatory purposes. This study presents evidence that the long-term annual increase in growth of HFC-134a has stopped and is now decreasing. For HFC-32 there is an early indication its rapid global growth period has ended, and there is evidence that the annual increase in global growth for HFC-125 has slowed from 2018. The inverse modelling results indicate that the UK implementation of European Union regulation of HFC emissions has been successful in initiating a decline in UK emissions in the since 2018. Comparison of the total InTEM UK HFC emissions in 2020 with the average from 2009–2012 shows a drop of 35%, indicating progress toward the target of a 79% decrease in sales by 2030. The total InTEM HFC emission estimates (2008–2018) are on average 73 (62–83)% of, or 4.3 (2.7–5.9) Tg CO2-eq yr−1 lower than, the total HFC emission estimates from the UK GHGI inventory. There are also significant discrepancies between the two estimates for the individual HFCs.
National greenhouse gas inventories (GHGIs) are submitted annually to the United Nations Framework Convention on Climate Change (UNFCCC). They are estimated in compliance with Intergovernmental Panel on Climate Change (IPCC) methodological guidance using activity data, emission factors and facility-level measurements. For some sources, the outputs from these calculations are very uncertain. Inverse modelling techniques that use high-quality, long-term measurements of atmospheric gases have been developed to provide independent verification of national GHGIs. This is considered good practice by the IPCC as it helps national inventory compilers to verify reported emissions and to reduce emission uncertainty. Emission estimates from the InTEM (Inversion Technique for Emission Modelling) model are presented for the UK for the hydrofluorocarbons (HFCs) reported to the UNFCCC (HFC-125, HFC-134a, HFC-143a, HFC-152a, HFC-23, HFC-32, HFC-227ea, HFC-245fa, HFC-43-10mee and HFC-365mfc). These HFCs have high global warming potentials (GWPs), and the global background mole fractions of all but two are increasing, thus highlighting their relevance to the climate and a need for increasing the accuracy of emission estimation for regulatory purposes. This study presents evidence that the long-term annual increase in growth of HFC-134a has stopped and is now decreasing. For HFC-32 there is an early indication, its rapid global growth period has ended, and there is evidence that the annual increase in global growth for HFC-125 has slowed from 2018. The inverse modelling results indicate that the UK implementation of European Union regulation of HFC emissions has been successful in initiating a decline in UK emissions from 2018. Comparison of the total InTEM UK HFC emissions in 2020 with the average from 2009–2012 shows a drop of 35 %, indicating progress toward the target of a 79 % decrease in sales by 2030. The total InTEM HFC emission estimates (2008–2018) are on average 73 (62–83) % of, or 4.3 (2.7–5.9) Tg CO2-eq yr−1 lower than, the total HFC emission estimates from the UK GHGI. There are also significant discrepancies between the two estimates for the individual HFCs.
he ubiquity of microplastics in aquatic ecosystems has raised concerns over their interaction with biota. However,microplastics research on freshwater species, especially mollusks, is still scarce. We, therefore, investigated the factorsaffecting microplastics ingestion in the freshwater musselDreissena polymorpha. Using polystyrene spheres (5, 10, 45,90μm), we determined the body burden of microplastics in the mussels in relation to 1) exposure and depuration time, 2)body size, 3) food abundance, and 4) microplastic concentrations.D. polymorpharapidly ingested microplastics and ex-creted most particles within 12 h. A few microplastics were retained for up to 1 wk. Smaller individuals had a higher relativebody burden of microplastics than larger individuals. The uptake of microplastics was concentration‐dependent, whereas anadditional food supply (algae) reduced it. We also compared the ingestion of microplastics byD. polymorphawith 2 otherfreshwater species (Anodonta anatina,Sinanodonta woodiana), highlighting that absolute and relative uptake depends onthe species and the size of the mussels. In addition, we determined toxicity of polystyrene fragments (≤63μm,6.4–100 000 p mL–1) and diatomite (natural particle, 100 000 p mL–1)inD. polymorphaafter 1, 3, 7, and 42 d of exposure,investigating clearance rate, energy reserves, and oxidative stress. Despite ingesting large quantities, exposure to poly-styrene fragments only affected the clearance rate ofD. polymorpha. Further, results of the microplastic and diatomiteexposure did not differ significantly. Therefore,D. polymorphais unaffected by or can compensate for polystyrene fragmenttoxicity even at concentrations above current environmental levels.Environ Toxicol Chem2021;40:2247–2260. © 2021 TheAuthors.Environmental Toxicology and Chemistrypublished by Wiley Periodicals LLC on behalf of SETAC.Keywords:Microplastics; Toxic effects; Mollusk toxicity
In recent years, the popularity of rock-climbing has grown tremendously, setting an increasing pressure on cliff habitats. Climbing may be particularly harmful in the Mediterranean biome due to its appropriate environmental conditions for climbing. A few studies have identified the effect of climbing on plant diversity at a small-scale (namely locally or even just in specific climbing areas). However, no studies exist assessing the potential risk of rock-climbing on a broad-scale (e.g., regional or national). The study aims to identify the priority locations and priority cliff plant species in Spain to focus future study efforts. Spain was selected because it is a plant biodiversity hotspot, with a great diversity of endemic and endangered species, and one of the most popular destinations for climbers. We used a geographic information system-based approach to model the spatial concurrence among Spanish climbing areas (and climbing intensity), natural protected areas (NPAs), and distribution of threatened cliff plants (and their IUCN threat category). We found that 53.5% of climbing areas in Spain are located within a NPA, most of them falling into NPAs of medium protection level. We mapped 151 threatened cliff plants, identifying four medium priority Mediterranean locations and eight priority species in which future research efforts should be focused. High-priority study locations are absent in Spain according to our spatial modeling. For the first time on a national scale, this study identifies areas in which climbing represents a potential threat for cliff habitats and threatened plants. These findings contribute to designing field studies on the effects of rock-climbing on Mediterranean cliffs, laying the groundwork for a sustainable, yet challenging, balance between the protection of these unique habitats and rock-climbing.
Plastics contain a complex mixture of chemicals including polymers, additives, starting substances and side-products of processing. These plastic chemicals are prone to leach into the packaged goods, in the case of food contact materials (FCMs), or into the natural environment, in the case of plastic debris. Thus, plastics represent an exposure source of chemicals for humans and wildlife alike. While it is widely known that individual plastic chemicals, such as bisphenol A and phthalates, are hazardous, little is known on the overall chemical composition and toxicity of plastics. When fragmented into smaller particles, referred to as microplastics (< 5 mm), the plastic itself can be ingested by many species. It is well established that microplastic ingestion can have negative consequences for a wide range of organisms including invertebrates, but the contribution of plastic chemicals to the toxicity of microplastics is unclear.
Given the above, the present thesis aimed at a comprehensive toxicological, ecotoxicological and chemical characterization of everyday plastics. For a comparative evaluation, 77 plastic products were selected covering 16 material types (e.g., polyethylene) made from petroleum or renewable feedstocks. These products included biodegradable products, FCMs and non-FCMs, as well as raw materials and final products, respectively. In the first two studies, the chemical mixtures contained in the 77 products were extracted with methanol and extracts were analyzed in a set of four in vitro bioassays and by non-target high-resolution gas or liquid chromatography mass spectrometry. Since an exposure only occurs if chemicals actually leach under realistic conditions, in a third study migration experiments with water were conducted for 24 out of the 77 products. The aqueous migrates were assessed in the same way as the methanolic extracts. In addition, the freshwater invertebrate Daphnia magna was exposed chronically to microplastics made of polyvinylchloride (PVC), polyurethane (PUR) and polylactic acid (PLA) to investigate the contribution of chemicals in microplastic toxicity, in a fourth study.
The experimental findings demonstrate that a wide variety of chemicals is present in plastics. A single plastic product can contain up to several thousand chemical features, most of which unique to that product and at the same time unknown. The results also indicate that the majority of these chemical mixtures are toxic in vitro. Accordingly, 65% of the plastic extracts induced baseline toxicity and 42% an oxidative stress response, while 25% had an antiandrogenic and 6% an estrogenic activity. This implies that chemicals causing unspecific toxicity are more prevalent in plastics than such with endocrine effects. These chemicals can also leach from plastics under realistic conditions. Between 17 and 8936 chemical features were detected in a single migrate sample and all 24 tested migrates induced in vitro toxicity. This means that humans and wildlife can actually be exposed to toxic plastic chemicals under realistic conditions. Generally, each product has its individual toxicological and chemical fingerprint. Thus, neither material type, feedstock, biodegradability nor the food contact suitability of a product can serve as a predictor for the toxicity, the chemical composition or complexity of a product. Likewise, this means that bio-based and biodegradable materials are not superior to their petroleum-based counterparts from a toxicological perspective despite being promoted as sustainable alternatives to conventional plastics.
Moreover, the present thesis demonstrates that plastic chemicals can be the main driver for microplastic toxicity. Irregular microplastics made of PVC, PUR and PLA adversely affected life-history traits of D. magna in a polymer type- and endpoint-dependent manner at concentrations between 100 and 500 mg L-1 and with a higher efficiency than natural kaolin particles. While the toxicity of PVC was triggered by the chemicals used in the material, the effects of PUR and PLA were induced by the physical properties of the particle.
In addition, in the fifth study, results and observations made during this thesis were integrated inter- and transdisciplinarily with the perspectives of a social scientist and a product manufacturer. This elucidated that knowledge on plastic ingredients is often concealed, is lacking or not applicable in practice. These intransparencies hinder the safety evaluation of plastic products as well as the choice and sale of the least toxic packaging material.
Overall, the present thesis highlights that the chemical safety of plastics and their bio-based and biodegradable alternatives is currently not ensured. Thus, chemicals require more consideration in the toxicity and risk assessment of plastics and microplastics. Product-specific and complex chemical compositions, including unknown compounds, pose a challenge here. Two essential steps towards non-toxic products are to increase transparency along the product life cycle and to reduce the chemical complexity of plastics by communication and regulation. The results of the present thesis indicate that products exist which do not contain toxic chemicals. These can serve to direct the design of safer plastics. Since toxicity and chemical complexity seem to increase with processing, the integration of toxicity testing during the production steps would further support the safe and sustainable production and use of plastic products.
Microplastics (MPs) are ubiquitous and persistent pollutants, and have been detected in a wide variety of media, from soils to aquatic systems. MPs, consisting primarily of polyethylene, polypropylene, and polyacrylamide polymers, have recently been found in 12% of samples of honey collected in Ecuador. Recently, MPs have also been identified in honey bees collected from apiaries in Copenhagen, Denmark, as well as nearby semiurban and rural areas. Given these documented exposures, assessment of their effects is critical for understanding the risks of MP exposure to honey bees. Exposure to polystyrene (PS)-MPs decreased diversity of the honey bee gut microbiota, followed by changes in gene expression related to oxidative damage, detoxification, and immunity. As a result, the aim of this perspective was to investigate whether wide-spread prevalence of MPs might have unintended negative effects on health and fitness of honey bees, as well as to draw the scientific community’s attention to the possible risks of MPs to the fitness of honey bees. Several research questions must be answered before MPs can be considered a potential threat to bees.