Article
Refine
Year of publication
Document Type
- Article (35) (remove)
Language
- English (35)
Has Fulltext
- yes (35)
Is part of the Bibliography
- no (35) (remove)
Keywords
- (F)EBID (1)
- COVID 19 (1)
- Co2(CO)8 (1)
- Diseases (1)
- EBID (1)
- Electronic properties and materials (1)
- Epidemiological statistics (1)
- Epidemiology (1)
- FEBID (1)
- Hubbard model (1)
Institute
he family of cubic noncentrosymmetric 3-4-3 compounds has become a fertile ground for the discovery of novel correlated metallic and insulating phases. Here, we report the synthesis of a new heavy fermion compound, Ce3Bi4Ni3. It is an isoelectronic analog of the prototypical Kondo insulator Ce3Bi4Pt3 and of the recently discovered Weyl-Kondo semimetal Ce3Bi4Pd3. In contrast to the volume-preserving Pt-Pd substitution, structural and chemical analyses reveal a positive chemical pressure effect in Ce3Bi4Ni3 relative to its heavier counterparts. Based on the results of electrical resistivity, Hall effect, magnetic susceptibility, and specific heat measurements, we identify an energy gap of 65–70 meV, about eight times larger than that in Ce3Bi4Pt3 and about 45 times larger than that of the Kondo-insulating background hosting the Weyl nodes in Ce3Bi4Pd3. We show that this gap as well as other physical properties do not evolve monotonically with increasing atomic number, i.e., in the sequence Ce3Bi4Ni3−Ce3Bi4Pd3−Ce3Bi4Pt3, but instead with increasing partial electronic density of states of the 𝑑 orbitals at the Fermi energy. This work opens the possibility to investigate the conditions under which topological states develop in this series of strongly correlated 3-4-3 materials.
Understanding the physics of strongly correlated electronic systems has been a central issue in condensed matter physics for decades. In transition metal oxides, strong correlations characteristic of narrow d bands are at the origin of remarkable properties such as the opening of Mott gap, enhanced effective mass, and anomalous vibronic coupling, to mention a few. SrVO3 with V4+ in a 3d1 electronic configuration is the simplest example of a 3D correlated metallic electronic system. Here, the authors' focus on the observation of a (roughly) quadratic temperature dependence of the inverse electron mobility of this seemingly simple system, which is an intriguing property shared by other metallic oxides. The systematic analysis of electronic transport in SrVO3 thin films discloses the limitations of the simplest picture of e–e correlations in a Fermi liquid (FL); instead, it is shown show that the quasi-2D topology of the Fermi surface (FS) and a strong electron–phonon coupling, contributing to dress carriers with a phonon cloud, play a pivotal role on the reported electron spectroscopic, optical, thermodynamic, and transport data. The picture that emerges is not restricted to SrVO3 but can be shared with other 3d and 4d metallic oxides.
Formation of Hubbard-like bands as a fingerprint of strong electron-electron interactions in FeSe
(2017)
We use angle-resolved photo-emission spectroscopy (ARPES) to explore the electronic structure of single crystals of FeSe over a wide range of binding energies and study the effects of strong electron-electron correlations. We provide evidence for the existence of "Hubbard-like bands" at high binding energies consisting of incoherent many-body excitations originating from Fe 3d states in addition to the renormalized quasiparticle bands near the Fermi level. Many high energy features of the observed ARPES data can be accounted for when incorporating effects of strong local Coulomb interactions in calculations of the spectral function via dynamical mean-field theory, including the formation of a Hubbard-like band. This shows that over the energy scale of several eV, local correlations arising from the on-site Coulomb repulsion and Hund's coupling are essential for a proper understanding of the electronic structure of FeSe and other related iron based superconductors.
Type-II multiferroic materials, in which ferroelectric polarization is induced by inversion non-symmetric magnetic order, promise new and highly efficient multifunctional applications based on mutual control of magnetic and electric properties. However, to date this phenomenon is limited to low temperatures. Here we report giant pressure-dependence of the multiferroic critical temperature in CuBr2: at 4.5 GPa it is enhanced from 73.5 to 162 K, to our knowledge the highest TC ever reported for non-oxide type-II multiferroics. This growth shows no sign of saturating and the dielectric loss remains small under these high pressures. We establish the structure under pressure and demonstrate a 60\% increase in the two-magnon Raman energy scale up to 3.6 GPa. First-principles structural and magnetic energy calculations provide a quantitative explanation in terms of dramatically pressure-enhanced interactions between CuBr2 chains. These large, pressure-tuned magnetic interactions motivate structural control in cuprous halides as a route to applied high-temperature multiferroicity.
In the search for novel organic charge transfer salts with variable degrees of charge transfer we have studied the effects of two modifications of the recently synthesized donor–acceptor system [tetramethoxypyrene (TMP)]–[tetracyanoquinodimethane (TCNQ)]. One is of chemical nature by substituting the acceptor TCNQ molecules by F4TCNQ molecules. The second consists in simulating the application of uniaxial pressure along the stacking axis of the system. In order to test the chemical substitution, we have grown single crystals of the TMP–F4TCNQ complex and analyzed its electronic structure via electronic transport measurements, ab initio density functional theory (DFT) calculations and UV/VIS/IR absorption spectroscopy. This system shows an almost ideal geometrical overlap of nearly planar molecules stacked alternately (mixed stack) and this arrangement is echoed by a semiconductor-like transport behavior with an increased conductivity along the stacking direction. This is in contrast to TMP–TCNQ which shows a less pronounced anisotropy and a smaller conductivity response. Our band structure calculations confirm the one-dimensional behavior of TMP–F4TCNQ with pronounced dispersion only along the stacking axis. Infrared measurements illustrating the C[triple bond, length as m-dash]N vibration frequency shift in F4TCNQ suggest however no improvement in the degree of charge transfer in TMP–F4TCNQ with respect to TMP–TCNQ. In both complexes about 0.1e is transferred from TMP to the acceptor. Concerning the pressure effect, our DFT calculations on the designed TMP–TCNQ and TMP–F4TCNQ structures under different pressure conditions show that application of uniaxial pressure along the stacking axis of TMP–TCNQ may be the route to follow in order to obtain a much more pronounced charge transfer.
The rich functionalities of transition-metal oxides and their interfaces bear an enormous technological potential. Its realization in practical devices requires, however, a significant improvement of yet relatively low electron mobility in oxide materials. Recently, a mobility boost of about 2 orders of magnitude has been demonstrated at the spinel–perovskite γ-Al2O3/SrTiO3 interface compared to the paradigm perovskite–perovskite LaAlO3/SrTiO3 interface. We explore the fundamental physics behind this phenomenon from direct measurements of the momentum-resolved electronic structure of this interface using resonant soft-X-ray angle-resolved photoemission. We find an anomaly in orbital ordering of the mobile electrons in γ-Al2O3/SrTiO3 which depopulates electron states in the top SrTiO3 layer. This rearrangement of the mobile electron system pushes the electron density away from the interface, which reduces its overlap with the interfacial defects and weakens the electron–phonon interaction, both effects contributing to the mobility boost. A crystal-field analysis shows that the band order alters owing to the symmetry breaking between the spinel γ-Al2O3 and perovskite SrTiO3. Band-order engineering, exploiting the fundamental symmetry properties, emerges as another route to boost the performance of oxide devices.
In recent years, the notion of 'Quantum Materials' has emerged as a powerful unifying concept across diverse fields of science and engineering, from condensed-matter and coldatom physics to materials science and quantum computing. Beyond traditional quantum materials such as unconventional superconductors, heavy fermions, and multiferroics, the field has significantly expanded to encompass topological quantum matter, two-dimensional materials and their van der Waals heterostructures, Moiré materials, Floquet time crystals, as well as materials and devices for quantum computation with Majorana fermions. In this Roadmap collection we aim to capture a snapshot of the most recent developments in the field, and to identify outstanding challenges and emerging opportunities. The format of the Roadmap, whereby experts in each discipline share their viewpoint and articulate their vision for quantum materials, reflects the dynamic and multifaceted nature of this research area, and is meant to encourage exchanges and discussions across traditional disciplinary boundaries. It is our hope that this collective vision will contribute to sparking new fascinating questions and activities at the intersection of materials science, condensed matter physics, device engineering, and quantum information, and to shaping a clearer landscape of quantum materials science as a new frontier of interdisciplinary scientific inquiry. We stress that this article is not meant to be a fully comprehensive review but rather an up-to-date snapshot of different areas of research on quantum materials with a minimal number of references focusing on the latest developments.
Controlling and understanding electron correlations in quantum matter is one of the most challenging tasks in materials engineering. In the past years a plethora of new puzzling correlated states have been found by carefully stacking and twisting two-dimensional van der Waals materials of different kind. Unique to these stacked structures is the emergence of correlated phases not foreseeable from the single layers alone. In Ta-dichalcogenide heterostructures made of a good metallic “1H”- and a Mott insulating “1T”-layer, recent reports have evidenced a cross-breed itinerant and localized nature of the electronic excitations, similar to what is typically found in heavy fermion systems. Here, we put forward a new interpretation based on first-principles calculations which indicates a sizeable charge transfer of electrons (0.4-0.6 e) from 1T to 1H layers at an elevated interlayer distance. We accurately quantify the strength of the interlayer hybridization which allows us to unambiguously determine that the system is much closer to a doped Mott insulator than to a heavy fermion scenario. Ta-based heterolayers provide therefore a new ground for quantum-materials engineering in the regime of heavily doped Mott insulators hybridized with metallic states at a van der Waals distance.
Deconfinement of Mott localized electrons into topological and spin–orbit-coupled Dirac fermions
(2020)
The interplay of electronic correlations, spin–orbit coupling and topology holds promise for the realization of exotic states of quantum matter. Models of strongly interacting electrons on honeycomb lattices have revealed rich phase diagrams featuring unconventional quantum states including chiral superconductivity and correlated quantum spin Hall insulators intertwining with complex magnetic order. Material realizations of these electronic states are, however, scarce or inexistent. In this work, we propose and show that stacking 1T-TaSe2 into bilayers can deconfine electrons from a deep Mott insulating state in the monolayer to a system of correlated Dirac fermions subject to sizable spin–orbit coupling in the bilayer. 1T-TaSe2 develops a Star-of-David charge density wave pattern in each layer. When the Star-of-David centers belonging to two adyacent layers are stacked in a honeycomb pattern, the system realizes a generalized Kane–Mele–Hubbard model in a regime where Dirac semimetallic states are subject to significant Mott–Hubbard interactions and spin–orbit coupling. At charge neutrality, the system is close to a quantum phase transition between a quantum spin Hall and an antiferromagnetic insulator. We identify a perpendicular electric field and the twisting angle as two knobs to control topology and spin–orbit coupling in the system. Their combination can drive it across hitherto unexplored grounds of correlated electron physics, including a quantum tricritical point and an exotic first-order topological phase transition.
The antiferromagnet and semimetal EuCd2As2 has recently attracted a lot of attention due to a wealth of topological phases arising from the interplay of topology and magnetism. In particular, the presence of a single pair of Weyl points is predicted for a ferromagnetic configuration of Eu spins along the c-axis in EuCd2As2. In the search for such phases, we investigate here the effects of hydrostatic pressure in EuCd2As2. For that, we present specific heat, transport and μSR measurements under hydrostatic pressure up to ∼2.5GPa, combined with {\it ab initio} density functional theory (DFT) calculations. Experimentally, we establish that the ground state of EuCd2As2 changes from in-plane antiferromagnetic (AFMab) to ferromagnetic at a critical pressure of ≈2\,GPa, which is likely characterized by the moments dominantly lying within the ab plane (FMab). The AFMab-FMab transition at such a relatively low pressure is supported by our DFT calculations. Furthermore, our experimental and theoretical results indicate that EuCd2As2 moves closer to the sought-for FMc state (moments ∥ c) with increasing pressure further. We predict that a pressure of ≈\,23\,GPa will stabilize the FMc state, if Eu remains in a 2+ valence state. Thus, our work establishes hydrostatic pressure as a key tuning parameter that (i) allows for a continuous tuning between magnetic ground states in a single sample of EuCd2As2 and (ii) enables the exploration of the interplay between magnetism and topology and thereby motivates a series of future experiments on this magnetic Weyl semimetal.
Electronic systems living on Archimedean lattices such as kagome and square–octagon networks are presently being intensively discussed for the possible realization of topological insulating phases. Coining the most interesting electronic topological states in an unbiased way is however not straightforward due to the large parameter space of possible Hamiltonians. A possible approach to tackle this problem is provided by a recently developed statistical learning method (Mertz and Valentí in Phys Rev Res 3:013132, 2021. https://doi.org/10.1103/PhysRevResearch.3.013132), based on the analysis of a large data sets of randomized tight-binding Hamiltonians labeled with a topological index. In this work, we complement this technique by introducing a feature engineering approach which helps identifying polynomial combinations of Hamiltonian parameters that are associated with non-trivial topological states. As a showcase, we employ this method to investigate the possible topological phases that can manifest on the square–octagon lattice, focusing on the case in which the Fermi level of the system lies at a high-order van Hove singularity, in analogy to recent studies of topological phases on the kagome lattice at the van Hove filling.
Critical spin liquid versus valence-bond glass in a triangular-lattice organic antiferromagnet
(2019)
In the quest for materials with unconventional quantum phases, the organic triangular-lattice antiferromagnet κ-(ET)2Cu2(CN)3 has been extensively discussed as a quantum spin liquid (QSL) candidate. The description of its low temperature properties has become, however, a particularly challenging task. Recently, an intriguing quantum critical behaviour was suggested from low-temperature magnetic torque experiments. Here we highlight significant deviations of the experimental observations from a quantum critical scenario by performing a microscopic analysis of all anisotropic contributions, including Dzyaloshinskii–Moriya and multi-spin scalar chiral interactions. Instead, we show that disorder-induced spin defects provide a comprehensive explanation of the low-temperature properties. These spins are attributed to valence bond defects that emerge spontaneously as the QSL enters a valence-bond glass phase at low temperature. This theoretical treatment is applicable to a general class of frustrated magnetic systems and has important implications for the interpretation of magnetic torque, nuclear magnetic resonance, thermal transport and thermodynamic experiments.
The aim of the present overview article is to raise awareness of an essential aspect that is usually not accounted for in the modelling of electron transport for focused-electron-beam-induced deposition (FEBID) of nanostructures: Surface excitations are on the one hand responsible for a sizeable fraction of the intensity in reflection-electron-energy-loss spectra for primary electron energies of up to a few kiloelectronvolts and, on the other hand, they play a key role in the emission of secondary electrons from solids, regardless of the primary energy. In this overview work we present a general perspective of recent works on the subject of surface excitations and on low-energy electron transport, highlighting the most relevant aspects for the modelling of electron transport in FEBID simulations.
The phase diagram of the square lattice bilayer Hubbard model: a variational Monte Carlo study
(2014)
We investigate the phase diagram of the square lattice bilayer Hubbard model at half-filling with the variational Monte Carlo method for both the magnetic and the paramagnetic case as a function of the interlayer hopping and on-site Coulomb repulsion U. With this study we resolve some discrepancies in previous calculations based on the dynamical mean-field theory, and we are able to determine the nature of the phase transitions between metal, Mott insulator and band insulator. In the magnetic case we find only two phases: an antiferromagnetic Mott insulator at small for any value of U and a band insulator at large . At large U values we approach the Heisenberg limit. The paramagnetic phase diagram shows at small a metal to Mott insulator transition at moderate U values and a Mott to band insulator transition at larger U values. We also observe a re-entrant Mott insulator to metal transition and metal to band insulator transition for increasing in the range of . Finally, we discuss the phase diagrams obtained in relation to findings from previous studies based on different many-body approaches.
The interaction of trimethyl(methylcyclopentadienyl)platinum(IV) ((C5H4CH3)Pt(CH3)3) molecules on fully and partially hydroxylated SiO2 surfaces, as well as the dynamics of this interaction were investigated using density functional theory (DFT) and finite temperature DFT-based molecular dynamics simulations. Fully and partially hydroxylated surfaces represent substrates before and after electron beam treatment and this study examines the role of electron beam pretreatment on the substrates in the initial stages of precursor dissociation and formation of Pt deposits. Our simulations show that on fully hydroxylated surfaces or untreated surfaces, the precursor molecules remain inactivated while we observe fragmentation of (C5H4CH3)Pt(CH3)3 on partially hydroxylated surfaces. The behavior of precursor molecules on the partially hydroxylated surfaces has been found to depend on the initial orientation of the molecule and the distribution of surface active sites. Based on the observations from the simulations and available experiments, we discuss possible dissociation channels of the precursor.
We investigate the magnetism of a previously unexplored distorted spin-1/2 kagome model consisting of three symmetry-inequivalent nearest-neighbor antiferromagnetic Heisenberg couplings Jhexagon, J and J', and uncover a rich ground state phase diagram even at the classical level. Using analytical arguments and numerical techniques we identify a collinear Q = 0 magnetic phase, two unusual non-collinear coplanar Q = (1/3,1/3) phases and a classical spin liquid phase with a degenerate manifold of non-coplanar ground states, resembling the jammed spin liquid phase found in the context of a bond-disordered kagome antiferromagnet. We further show with density functional theory calculations that the recently synthesized Y-kapellasite Y3Cu9(OH)19Cl8 is a realization of this model and predict its ground state to lie in the region of Q = (1/3,1/3) order, which remains stable even after inclusion of quantum fluctuation effects within variational Monte Carlo and pseudofermion functional renormalization group. The presented model opens a new direction in the study of kagome antiferromagnets.
Recent density functional theory (DFT) calculations for KFe2As2 have been shown to be insufficient to satisfactorily describe angle-resolved photoemission (ARPES) measurements as well as observed de Haas–van Alphen (dHvA) frequencies. In the present work, we extend DFT calculations based on the full-potential linear augmented plane-wave method by dynamical mean field theory (DFT+DMFT) to include correlation effects beyond the local density approximation. We present results for two sets of reported crystal structures. Our calculations indicate that KFe2As2 is a moderately correlated metal with a mass renormalization factor of the Fe $3{\rm d}$ orbitals between 1.6 and 2.7. Furthermore, the obtained shape and size of the Fermi surface are in good agreement with ARPES measurements and we observe some topological changes with respect to DFT calculations such as the opening of an inner hole cylinder at the Z point. As a result, our calculated dHvA frequencies differ greatly from existing DFT results and qualitatively agree with experimental data. On this basis, we argue that correlation effects are important to understand the -presently under debate- nature of the superconducting state in KFe2As2.
We present a numerical investigation of energy and charge distributions during electron-beam-induced growth of tungsten nanostructures on SiO2 substrates by using a Monte Carlo simulation of the electron transport. This study gives a quantitative insight into the deposition of energy and charge in the substrate and in the already existing metallic nanostructures in the presence of the electron beam. We analyze electron trajectories, inelastic mean free paths, and the distribution of backscattered electrons in different compositions and at different depths of the deposit. We find that, while in the early stages of the nanostructure growth a significant fraction of electron trajectories still interacts with the substrate, when the nanostructure becomes thicker the transport takes place almost exclusively in the nanostructure. In particular, a larger deposit density leads to enhanced electron backscattering. This work shows how mesoscopic radiation-transport techniques can contribute to a model that addresses the multi-scale nature of the electron-beam-induced deposition (EBID) process. Furthermore, similar simulations can help to understand the role that is played by backscattered electrons and emitted secondary electrons in the change of structural properties of nanostructured materials during post-growth electron-beam treatments.
Motivated by the wealth of proposals and realizations of nontrivial topological phases in EuCd2As2, such as a Weyl semimetallic state and the recently discussed semimetallic versus semiconductor behavior in this system, we analyze in this work the role of the delicate interplay of Eu magnetism, strain and pressure on the realization of such phases. For that we invoke a combination of a group theoretical analysis with ab initio density functional theory calculations and uncover a rich phase diagram with various non-trivial topological phases beyond a Weyl semimetallic state, such as axion and topological crystalline insulating phases, and discuss their realization.
The families of organic charge-transfer salts 𝜅-(BEDT-TTF)2𝑋 and 𝜅-(BETS)2𝑋, where BEDT-TTF and BETS stand for the organic donor molecules C10H8S8 and C10H8S4Se4, respectively, and X for an inorganic electron acceptor, have been proven to serve as a powerful playground for the investigation of the physics of frustrated Mott insulators. These materials have been ascribed a model character, since the dimerization of the organic molecules allows to map these materials onto a single band Hubbard model, in which the dimers reside on an anisotropic triangular lattice. By changing the inorganic unit X or applying physical pressure, the correlation strength and anisotropy of the triangular lattice can be varied. This has led to the discovery of a variety of exotic phenomena, including quantum-spin liquid states, a plethora of long-range magnetic orders in proximity to a Mott metal-insulator transition, and unconventional superconductivity. While many of these phenomena can be described within this effective one-band Hubbard model on a triangular lattice, it has become evident in recent years that this simplified description is insufficient to capture all observed magnetic and electronic properties. The ingredients for generalized models that are relevant include, but are not limited to, spin-orbit coupling, intra-dimer charge and spin degrees of freedom, electron-lattice coupling, as well as disorder effects. Here, we review selected theoretical and experimental discoveries that clearly demonstrate the relevance thereof. At the same time, we outline that these aspects are not only relevant to this class of organic charge-transfer salts, but are also receiving increasing attention in other classes of inorganic strongly correlated electron systems. This reinforces the model character that the 𝜅-phase organic charge-transfer salts have for understanding and discovering novel phenomena in strongly correlated electron systems from a theoretical and experimental point of view.