Refine
Year of publication
- 2023 (319) (remove)
Document Type
- Preprint (169)
- Article (96)
- Doctoral Thesis (29)
- Conference Proceeding (12)
- Contribution to a Periodical (9)
- Book (3)
- Bachelor Thesis (1)
Has Fulltext
- yes (319)
Is part of the Bibliography
- no (319) (remove)
Keywords
Institute
- Physik (319) (remove)
Hadronic resonances are used to probe the hadron gas produced in the late stage of heavy-ion collisions since they decay on the same timescale, of the order of 1 to 10 fm/c, as the decoupling time of the system. In the hadron gas, (pseudo)elastic scatterings among the products of resonances that decayed before the kinetic freeze-out and regeneration processes counteract each other, the net effect depending on the resonance lifetime, the duration of the hadronic phase, and the hadronic cross sections at play. In this context, the Σ(1385)± particle is of particular interest as models predict that regeneration dominates over rescattering despite its relatively short lifetime of about 5.5 fm/c. The first measurement of the Σ(1385)± resonance production at midrapidity in Pb-Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector is presented in this Letter. The resonances are reconstructed via their hadronic decay channel, Λπ, as a function of the transverse momentum (pT) and the collision centrality. The results are discussed in comparison with the measured yield of pions and with expectations from the statistical hadronization model as well as commonly employed event generators, including PYTHIA8/Angantyr and EPOS3 coupled to the UrQMD hadronic cascade afterburner. None of the models can describe the data. For Σ(1385)±, a similar behaviour as K∗(892)0 is observed in data unlike the predictions of EPOS3 with afterburner.
Hadronic resonances are used to probe the hadron gas produced in the late stage of heavy-ion collisions since they decay on the same timescale, of the order of 1 to 10 fm/c, as the decoupling time of the system. In the hadron gas, (pseudo)elastic scatterings among the products of resonances that decayed before the kinetic freeze-out and regeneration processes counteract each other, the net effect depending on the resonance lifetime, the duration of the hadronic phase, and the hadronic cross sections at play. In this context, the Σ(1385)± particle is of particular interest as models predict that regeneration dominates over rescattering despite its relatively short lifetime of about 5.5 fm/c. The first measurement of the Σ(1385)± resonance production at midrapidity in Pb-Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector is presented in this Letter. The resonances are reconstructed via their hadronic decay channel, Λπ, as a function of the transverse momentum (pT) and the collision centrality. The results are discussed in comparison with the measured yield of pions and with expectations from the statistical hadronization model as well as commonly employed event generators, including PYTHIA8/Angantyr and EPOS3 coupled to the UrQMD hadronic cascade afterburner. None of the models can describe the data. For Σ(1385)±, a similar behaviour as K∗(892)0 is observed in data unlike the predictions of EPOS3 with afterburner.
W±-boson production in p–Pb collisions at √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV
(2023)
The production of the W± bosons measured in p−Pb collisions at a centre-of-mass energy per nucleon−nucleon collision sNN−−−−√=8.16 TeV and Pb−Pb collisions at √sNN=5.02 TeV with ALICE at the LHC is presented. The W± bosons are measured via their muonic decay channel, with the muon reconstructed in the pseudorapidity region −4<ημlab<−2.5 with transverse momentum pμT>10 GeV/c. While in Pb−Pb collisions the measurements are performed in the forward (2.5<yμcms<4) rapidity region, in p−Pb collisions, where the centre-of-mass frame is boosted with respect to the laboratory frame, the measurements are performed in the backward (−4.46<yμcms<−2.96) and forward (2.03<yμcms<3.53) rapidity regions. The W− and W+ production cross sections, lepton-charge asymmetry, and nuclear modification factors are evaluated as a function of the muon rapidity. In order to study the production as a function of the p−Pb collision centrality, the production cross sections of the W− and W+ bosons are combined and normalised to the average number of binary nucleon−nucleon collision ⟨Ncoll⟩. In Pb−Pb collisions, the same measurements are presented as a function of the collision centrality. Study of the binary scaling of the W±-boson cross sections in p−Pb and Pb−Pb collisions is also reported. The results are compared with perturbative QCD (pQCD) calculations, with and without nuclear modifications of the Parton Distribution Functions (PDFs), as well as with available data at the LHC. Significant deviations from the theory expectations are found in the two collision systems, indicating that the measurements can provide additional constraints for the determination of nuclear PDF (nPDFs) and in particular of the light-quark distributions.
W±-boson production in p–Pb collisions at √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV
(2023)
The production of the W± bosons measured in p–Pb collisions at a centreof-mass energy per nucleon–nucleon collision √sNN = 8.16 TeV and Pb–Pb collisions at √sNN = 5.02 TeV with ALICE at the LHC is presented. The W± bosons are measured via their muonic decay channel, with the muon reconstructed in the pseudorapidity region −4 < ηµ lab < −2.5 with transverse momentum p µ T > 10 GeV/c. While in Pb–Pb collisions the measurements are performed in the forward (2.5 < yµ cms < 4) rapidity region, in p–Pb collisions, where the centre-of-mass frame is boosted with respect to the laboratory frame, the measurements are performed in the backward (−4.46 < yµ cms < −2.96) and forward (2.03 < yµ cms < 3.53) rapidity regions. The W− and W+ production cross sections, leptoncharge asymmetry, and nuclear modification factors are evaluated as a function of the muon rapidity. In order to study the production as a function of the p–Pb collision centrality, the production cross sections of the W− and W+ bosons are combined and normalised to the average number of binary nucleon–nucleon collision hNcolli. In Pb–Pb collisions, the same measurements are presented as a function of the collision centrality. Study of the binary scaling of the W±-boson cross sections in p–Pb and Pb–Pb collisions is also reported. The results are compared with perturbative QCD calculations, with and without nuclear modifications of the Parton Distribution Functions (PDFs), as well as with available data at the LHC. Significant deviations from the theory expectations are found in the two collision systems, indicating that the measurements can provide additional constraints for the determination of nuclear PDFs and in particular of the light-quark distributions.
We present results of hard X-ray angle-resolved photoemission spectroscopy and photoemission diffraction measurements performed on high-quality single crystals of the valence transition compound EuPd2Si2 for temperatures 25~K ≤ T ≤ 300~K. At low temperatures we observe a Eu 4f valence v=2.5, % occupation number n=6.5, which decreases to v=2.1 for temperatures above the valence transition around TV≈160~K. The experimental valence numbers resulting from an evaluation of the Eu(III)/Eu(II) 3d core levels, are used for calculating band structures using density functional theory. The valence transition significantly changes the band structure as determined by angle-resolved photoemission spectroscopy. In particular, the Eu 5d valence bands are shifted to lower binding energies with increasing Eu 4f occupancy. To a lesser extent, bands derived from the Si 3p and Pd 4d orbitals are also affected. This observation suggests a partial charge transfer between Eu and Pd/Si sites. Comparison with {\it ab-initio} theory shows a good agreement with experiment, in particular concerning the unequal band shift with increasing Eu 4f occupancy.
We report about the properties of the underlying event measured with ALICE at the LHC in pp and p−Pb collisions at sNN−−−√=5.02 TeV. The event activity, quantified by charged-particle number and summed-pT densities, is measured as a function of the leading-particle transverse momentum (ptrigT). These quantities are studied in three azimuthal-angle regions relative to the leading particle in the event: toward, away, and transverse. Results are presented for three different pT thresholds (0.15, 0.5, and 1 GeV/c) at mid-pseudorapidity (|η|<0.8). The event activity in the transverse region, which is the most sensitive to the underlying event, exhibits similar behaviour in both pp and p−Pb collisions, namely, a steep increase with ptrigT for low ptrigT, followed by a saturation at ptrigT≈5 GeV/c. The results from pp collisions are compared with existing measurements at other centre-of-mass energies. The quantities in the toward and away regions are also analyzed after the subtraction of the contribution measured in the transverse region. The remaining jet-like particle densities are consistent in pp and p−Pb collisions for ptrigT>10 GeV/c, whereas for lower ptrigT values the event activity is slightly higher in p−Pb than in pp collisions. The measurements are compared with predictions from the PYTHIA 8 and EPOS LHC Monte Carlo event generators.
We report about the properties of the underlying event measured with ALICE at the LHC in pp and p−Pb collisions at sNN−−−√=5.02 TeV. The event activity, quantified by charged-particle number and summed-pT densities, is measured as a function of the leading-particle transverse momentum (ptrigT). These quantities are studied in three azimuthal-angle regions relative to the leading particle in the event: toward, away, and transverse. Results are presented for three different pT thresholds (0.15, 0.5, and 1 GeV/c) at mid-pseudorapidity (|η|<0.8). The event activity in the transverse region, which is the most sensitive to the underlying event, exhibits similar behaviour in both pp and p−Pb collisions, namely, a steep increase with ptrigT for low ptrigT, followed by a saturation at ptrigT≈5 GeV/c. The results from pp collisions are compared with existing measurements at other centre-of-mass energies. The quantities in the toward and away regions are also analyzed after the subtraction of the contribution measured in the transverse region. The remaining jet-like particle densities are consistent in pp and p−Pb collisions for ptrigT>10 GeV/c, whereas for lower ptrigT values the event activity is slightly higher in p−Pb than in pp collisions. The measurements are compared with predictions from the PYTHIA 8 and EPOS LHC Monte Carlo event generators.
Two-particle transverse momentum differential correlators, recently measured in Pb--Pb collisions at energies available at the CERN Large Hadron Collider (LHC), provide an additional tool to gain insights into particle production mechanisms and infer transport properties, such as the ratio of shear viscosity to entropy density, of the medium created in Pb-Pb collisions. The longitudinal long-range correlations and the large azimuthal anisotropy measured at low transverse momenta in small collision systems, namely pp and p-Pb, at LHC energies resemble manifestations of collective behaviour. This suggests that locally equilibrated matter may be produced in these small collision systems, similar to what is observed in Pb-Pb collisions. In this work, the same two-particle transverse momentum differential correlators are exploited in pp and p-Pb collisions at s√=7 TeV and sNN−−−√=5.02 TeV, respectively, to seek evidence for viscous effects. Specifically, the strength and shape of the correlators are studied as a function of the produced particle multiplicity to identify evidence for longitudinal broadening that might reveal the presence of viscous effects in these smaller systems. The measured correlators and their evolution from pp and p--Pb to Pb--Pb collisions are additionally compared to predictions from Monte Carlo event generators, and the potential presence of viscous effects is discussed.
Two-particle transverse momentum differential correlators, recently measured in Pb-Pb collisions at LHC energies, provide an additional tool to gain insights into particle production mechanisms and infer transport properties, such as the ratio of shear viscosity to entropy density, of the medium created in Pb-Pb collisions. The longitudinal long-range correlations and the large azimuthal anisotropy measured at low transverse momenta in small collision systems, namely pp and p-Pb, at LHC energies resemble manifestations of collective behaviour. This suggests that locally equilibrated matter may be produced in these small collision systems, similar to what is observed in Pb-Pb collisions. In this work, the same two-particle transverse momentum differential correlators are exploited in pp and p-Pb collisions at s√=7 TeV and sNN−−−√=5.02 TeV, respectively, to seek evidence for viscous effects. Specifically, the strength and shape of the correlators are studied as a function of the produced particle multiplicity to identify evidence for longitudinal broadening that might reveal the presence of viscous effects in these smaller systems. The measured correlators and their evolution from pp and p-Pb to Pb-Pb collisions are additionally compared to predictions from Monte Carlo event generators, and the potential presence of viscous effects is discussed.
Lattice strains of appropriate symmetry have served as an excellent tool to explore the interaction of superconductivity in the iron-based superconductors with nematic and stripe spin-density wave (SSDW) order, which are both closely tied to an orthorhombic distortion. In this work, we contribute to a broader understanding of the coupling of strain to superconductivity and competing normal-state orders by studying CaKFe4As4 under large, in-plane strains of B1g and B2g symmetry. In contrast to the majority of iron-based superconductors, pure CaKFe4As4 exhibits superconductivity with relatively high transition temperature of Tc∼35 K in proximity of a non-collinear, tetragonal, hedgehog spin-vortex crystal (SVC) order. Through experiments, we demonstrate an anisotropic in-plane strain response of Tc, which is reminiscent of the behavior of other pnictides with nematicity. However, our calculations suggest that in CaKFe4As4, this anisotropic response correlates with the one of the SVC fluctuations, highlighting the close interrelation of magnetism and high-Tc superconductivity. By suggesting moderate B2g strains as an effective parameter to change the stability of SVC and SSDW, we outline a pathway to a unified phase diagram of iron-based superconductivity.
Three-body nuclear forces play an important role in the structure of nuclei and hypernuclei and are also incorporated in models to describe the dynamics of dense baryonic matter, such as in neutron stars. So far, only indirect measurements anchored to the binding energies of nuclei can be used to constrain the three-nucleon force, and if hyperons are considered, the scarce data on hypernuclei impose only weak constraints on the three-body forces. In this work, we present the first direct measurement of the p−p−p and p−p−Λ systems in terms of three-particle mixed moments carried out for pp collisions at s√ = 13 TeV. Three-particle cumulants are extracted from the normalised mixed moments by applying the Kubo formalism, where the three-particle interaction contribution to these moments can be isolated after subtracting the known two-body interaction terms. A negative cumulant is found for the p−p−p system, hinting to the presence of a residual three-body effect while for p−p−Λ the cumulant is consistent with zero. This measurement demonstrates the accessibility of three-baryon correlations at the LHC.
Three-body nuclear forces play an important role in the structure of nuclei and hypernuclei and are also incorporated in models to describe the dynamics of dense baryonic matter, such as in neutron stars. So far, only indirect measurements anchored to the binding energies of nuclei can be used to constrain the three-nucleon force, and if hyperons are considered, the scarce data on hypernuclei impose only weak constraints on the three-body forces. In this work, we present the first direct measurement of the p−p−p and p−p−Λ systems in terms of three-particle correlation functions carried out for pp collisions at s√=13 TeV. Three-particle cumulants are extracted from the correlation functions by applying the Kubo formalism, where the three-particle interaction contribution to these correlations can be isolated after subtracting the known two-body interaction terms. A negative cumulant is found for the p−p−p system, hinting to the presence of a residual three-body effect while for p−p−Λ the cumulant is consistent with zero. This measurement demonstrates the accessibility of three-baryon correlations at the LHC.
Cryo-electron tomography (cryo-ET) is a powerful method to elucidate subcellular architecture and to structurally analyse biomolecules in situ by subtomogram averaging (STA). Specimen thickness is a key factor affecting cryo-ET data quality. Cells that are too thick for transmission imaging can be thinned by cryo-focused-ion-beam (cryo-FIB) milling. However, optimal specimen thickness for cryo-ET on lamellae has not been systematically investigated. Furthermore, the ions used to ablate material can cause damage in the lamellae, thereby reducing STA resolution. Here, we systematically benchmark the resolution depending on lamella thickness and the depth of the particles within the sample. Up to ca. 180 nm, lamella thickness does not negatively impact resolution. This shows that there is no need to generate very thin lamellae and thickness can be chosen such that it captures major cellular features. Furthermore, we show that gallium-ion-induced damage extends to depths of up to 30 nm from either lamella surface.
Hadron lists based on experimental studies summarized by the Particle Data Group (PDG) are a crucial input for the equation of state and thermal models used in the study of strongly-interacting matter produced in heavy-ion collisions. Modeling of these strongly-interacting systems is carried out via hydrodynamical simulations, which are followed by hadronic transport codes that also require a hadronic list as input. To remain consistent throughout the different stages of modeling of a heavy-ion collision, the same hadron list with its corresponding decays must be used at each step. It has been shown that even the most uncertain states listed in the PDG from 2016 are required to reproduce partial pressures and susceptibilities from Lattice Quantum Chromodynamics with the hadronic list known as the PDG2016+. Here, we update the hadronic list for use in heavy-ion collision modeling by including the latest experimental information for all states listed in the Particle Data Booklet in 2021. We then compare our new list, called PDG2021+, to Lattice Quantum Chromodynamics results and find that it achieves even better agreement with the first principles calculations than the PDG2016+ list. Furthermore, we develop a novel scheme based on intermediate decay channels that allows for only binary decays, such that PDG2021+ will be compatible with the hadronic transport framework SMASH. Finally, we use these results to make comparisons to experimental data and discuss the impact on particle yields and spectra.
Off-central heavy-ion collisions are known to feature magnetic fields with magnitudes and characteristic gradients corresponding to the scale of the strong interactions. In this work, we employ equilibrium lattice simulations of the underlying theory, QCD, involving similar inhomogeneous magnetic field profiles to achieve a better understanding of this system. We simulate three flavors of dynamical staggered quarks with physical masses at a range of magnetic fields and temperatures, and extrapolate the results to the continuum limit. Analyzing the impact of the field on the quark condensate and the Polyakov loop, we find non-trivial spatial features that render the QCD medium qualitatively different as in the homogeneous setup, especially at temperatures around the transition. In addition, we construct leading-order chiral perturbation theory for the inhomogeneous background and compare its prediction to our lattice results at low temperature. Our findings will be useful to benchmark effective theories and low-energy models of QCD for a better description of peripheral heavy-ion collisions.
Off-central heavy-ion collisions are known to feature magnetic fields with magnitudes and characteristic gradients corresponding to the scale of the strong interactions. In this work, we employ equilibrium lattice simulations of the underlying theory, QCD, involving similar inhomogeneous magnetic field profiles to achieve a better understanding of this system. We simulate three flavors of dynamical staggered quarks with physical masses at a range of magnetic fields and temperatures, and extrapolate the results to the continuum limit. Analyzing the impact of the field on the quark condensate and the Polyakov loop, we find non-trivial spatial features that render the QCD medium qualitatively different as in the homogeneous setup, especially at temperatures around the transition. In addition, we construct leading-order chiral perturbation theory for the inhomogeneous background and compare its prediction to our lattice results at low temperature. Our findings will be useful to benchmark effective theories and low-energy models of QCD for a better description of peripheral heavy-ion collisions.
Off-central heavy-ion collisions are known to feature magnetic fields with magnitudes and characteristic gradients corresponding to the scale of the strong interactions. In this work, we employ equilibrium lattice simulations of the underlying theory, QCD, involving similar inhomogeneous magnetic field profiles to achieve a better understanding of this system. We simulate three flavors of dynamical staggered quarks with physical masses at a range of magnetic fields and temperatures, and extrapolate the results to the continuum limit. Analyzing the impact of the field on the quark condensate and the Polyakov loop, we find non-trivial spatial features that render the QCD medium qualitatively different as in the homogeneous setup, especially at temperatures around the transition. In addition, we construct leading-order chiral perturbation theory for the inhomogeneous background and compare its prediction to our lattice results at low temperature. Our findings will be useful to benchmark effective theories and low-energy models of QCD for a better description of peripheral heavy-ion collisions.
Twisted heterostructures of van der Waals materials have received much attention for their many remarkable properties. Here, we present a comprehensive theory of the long-range ordered magnetic phases of twisted bilayer α-RuCl3 via a combination of first-principles calculations and atomistic simulations. While a monolayer exhibits zigzag antiferromagnetic order with three possible ordering wave vectors, a rich phase diagram is obtained for moiré superlattices as a function of interlayer exchange and twist angle. For large twist angles, each layer spontaneously picks a single zigzag ordering wave vector, whereas, for small twist angles, the ground state involves a combination of all three wave vectors in a complex hexagonal domain structure. This multi-domain order minimizes the interlayer energy while enduring the energy cost due to the domain wall formation. Our results indicate that magnetic frustration due to stacking-dependent interlayer exchange in moiré superlattices can be used to tune the magnetic ground state and enhance quantum fluctuations in α-RuCl3.
In this thesis, we use lattice QCD to study a part of the QCD phase diagram, specifically the QCD phase transition at mu=0, where the QCD matter changes from hadron gas to quark-gluon plasma (QGP) with increasing temperature.
This phase transition takes place as a crossover, but when theoretically changing the masses of the quarks, the order of the phase transition changes as well.
We focus on the region of heavy quark masses with Nf=2 flavours, where we investigate the critical quark mass at the second order phase transition in the form of a Z2 point between the first-order and the crossover region.
The first-order region is positioned at infinitely heavy quarks. As the quark masses decrease, the associated Z3 centre symmetry breaks explicitly, causing the first-order phase transition to weaken until it turns into the Z2 point and finally into a crossover.
We study this Z2 point using simulations at Nf=2 and lattices of the sizes Nt = {6, 8, 10, 12}, partially building on previous work, in which the simulations for Nt = {6, 8, 10} were started.
The simulations for Nt=12 are not finished yet though, but we were able to draw some preliminary conclusions. These simulations are run on GPUs and CPUs, using the codes Cl2QCD and open-QCD-FASTSUM, respectively. Afterwards, the data goes through a first analysis step in the form of the Python program PLASMA, preparing it for the two techniques we use to analyse the nature of the phase transition.
As a first, reliable analysis method, we perform a finite size scaling analysis of the data to find the location of the Z2 point. Since we are using lattice QCD, performing a continuum extrapolation is necessary to reach the continuum result.
In regard to this, the finite size scaling analysis method is hampered by the excessive amount of simulated data that is needed regarding statistics and the total number of simulations, which is why this thesis is only an intermediate step towards the continuum limit.
This also leads to the second analysis technique we explore in this thesis.
We start to design a Landau theory which describes the phase boundary for heavy masses at Nf=2 based on the simulated data.
We develop a Landau functional for every Nt we have simulation data for.
Albeit the results are not at the same precision as the ones from the finite size scaling analysis, we are able to reproduce the position of the Z2 point for every Nt.
Even though we are not able to take a continuum extrapolation right now, after more development takes place in future works, this approach might, in the long run, lead to a continuum result that won't need as many simulations as the finite size scaling analysis.
The family of cubic noncentrosymmetric 3-4-3 compounds has become a fertile ground for the discovery of novel correlated metallic and insulating phases. Here, we report the synthesis of a new heavy fermion compound, Ce3Bi4Ni3. It is an isoelectronic analog of the prototypical Kondo insulator Ce3Bi4Pt3 and of the recently discovered Weyl-Kondo semimetal Ce3Bi4Pd3. In contrast to the volume-preserving Pt-Pd substitution, structural and chemical analyses reveal a positive chemical pressure effect in Ce3Bi4Ni3 relative to its heavier counterparts. Based on the results of electrical resistivity, Hall effect, magnetic susceptibility, and specific heat measurements, we identify an energy gap of 65-70 meV, about 8 times larger than that in Ce3Bi4Pt3 and about 45 times larger than that of the Kondo-insulating background hosting the Weyl nodes in Ce3Bi4Pd3. We show that this gap as well as other physical properties do not evolve monotonically with increasing atomic number, i.e., in the sequence Ce3Bi4Ni3-Ce3Bi4Pd3-Ce3Bi4Pt3, but instead with increasing partial electronic density of states of the d orbitals at the Fermi energy. To understand under which condition topological states form in these materials is a topic for future studies.
Vertebrate life depends on renal function to filter excess fluid and remove low-molecular-weight waste products. An essential component of the kidney filtration barrier is the slit diaphragm (SD), a specialized cell-cell junction between podocytes. Although the constituents of the SD are largely known, its molecular organization remains elusive. Here, we use super-resolution correlative light and electron microscopy to quantify a linear rate of reduction in albumin concentration across the filtration barrier under no-flow conditions. Next, we use cryo-electron tomography of vitreous lamellae from high-pressure frozen native glomeruli to analyze the molecular architecture of the SD. The resulting densities resemble a fishnet pattern. Fitting of Nephrin and Neph1, the main constituents of the SD, results in a complex interaction pattern with multiple contact sites between the molecules. Using molecular dynamics simulations, we construct a blueprint of the SD that explains its molecular architecture. Our architectural understanding of the SD reconciles previous findings and provides a mechanistic framework for the development of novel therapies to treat kidney dysfunction.
Vertebrate life depends on renal function to filter excess fluid and remove low-molecular-weight waste products. An essential component of the kidney filtration barrier is the slit diaphragm (SD), a specialized cell-cell junction between podocytes. Although the constituents of the SD are largely known, its molecular organization remains elusive. Here, we use super-resolution correlative light and electron microscopy to quantify a linear rate of reduction in albumin concentration across the filtration barrier. Next, we use cryo-electron tomography of vitreous lamellae from high-pressure frozen native glomeruli to analyze the molecular architecture of the SD. The resulting densities resemble a fishnet pattern. Fitting of Nephrin and Neph1, the main constituents of the SD, results in a complex interaction pattern with multiple contact sites between the molecules. Using molecular dynamics flexible fitting, we construct a blueprint of the SD, where we describe all interactions. Our architectural understanding of the SD reconciles previous findings and provides a mechanistic framework for the development of novel therapies to treat kidney dysfunction.
We show examples of the impact of the Maxwellian averaged capture cross sections determined at n_TOF over the past 20 years on AGB stellar nucleosynthesis models. In particular, we developed an automated procedure to derive MACSs from evaluated data libraries, which are subsequently used as input to stellar models computed by means of the FuNS code. In this contribution, we present a number of s-process abundances obtained using different data libraries as input to stellar models, with a focus on the role of n_TOF data.
The core of this work is represented by the investigation of the chiral phase transition, using Monte Carlo simulations and unimproved staggered fermions, both in the weak and strong coupling regimes of Quantum Chromodynamics. Based on recent results from Monte Carlo simulations, both using unimproved staggered fermions and Wilson fermions, the chiral phase transition in the continuum and chiral limit shows compatibility with a second-order phase transition for Nf (number of flavours) in range [2:7], at zero baryon chemical potential. This achievement relies on the analytic continuation of Nf to non-integer values on the lattice, which allows to make use of extrapolation techniques to the chiral limit, where simulations are not possible. Furthermore, these results provide a resolution to the ambiguous scenario for Nf = 2 in the chiral limt. The first part of this thesis is devoted to the investigation of the chiral phase transition when a non-zero imaginary baryon chemical potential is involved, whose value corresponds to the 81% of the Roberge-Weiss one. Using the same extrapolation techniques aforementioned, the order of the chiral phase transition in the continuum and chiral limit shows compatibility with a second-order phase transition for Nf in range [2:6], highlighting a lack of dependence of the order of the chiral phase transition on the imaginary baryon chemical potential value. The second part of this thesis is about the study of the extension of the first-order chiral region in the strong coupling regime, at zero baryon chemical potential. Using Monte Carlo techniques, this can be done by investigating the Z2 boundary on a coarse lattice, whose temporal extent reads Nt = 2, and simulations are realised for Nf = 4, 8. The results in the weak coupling regime show, for $Nt = 8, 6, 4 and fixed Nf value, an inflating first-order chiral region. As in the strong coupling limit a second-order chiral phase transition is expected, the first-order chiral region has to shrink as the strong coupling regime is approached, resulting in a non-monotonic behaviour of the Z2 boundary. For Nf = 8, a critical mass on the Z2 boundary has been obtained, confirming the expected non-monotonic behaviour. For Nf = 4 the results do not provide a unique conclusion: Either a Z2 boundary at extremely low bare quark mass or a second-order chiral phase transition in the O(2) universality class in the chiral limit can take place. In addition to the two main topics, the performances of the second-order minimum norm integrator (2MN) and the fourth-order minimum norm integrator (4MN) have been compared, after implementing the 4MN one in the CL2QCD code used to realise our simulations. The 2MN integrator had already been implemented in the code since the first version was released. The two integrators belong to the class of symplectic integrators and represent an essential component of the RHMC algorithm, involved in our investigation. This step is extremely important, in order to guarantee the best quality when collecting data from simulations, and the results of the comparison suggested to favor the 2MN integrator, for both the topics.
Present nuclear reaction network computations for astrophysical simulations involve many different types of rates, including neutron-capture reactions of interest for the modeling of heavy-element nucleosynthesis. While for many of them we still have to rely on theoretical calculations, an increasing number of experimentally-determined cross sections have now become available. In this contribution, we present “ASTrophysical Rate and rAw data Library” (ASTRAL), a new online database for neutron-capture cross sections based on experimental results, mainly obtained through activation and timeof-flight measurements. For the evaluation process, cross sections were re-calculated starting from raw data and by considering recent changes in physical properties of the involved isotopes (e.g., half-life and γ-ray intensities). We show the current status of the database, the techniques adopted to derive the recommended Maxwellian-averaged cross sections, and future developments.
We present the first systematic comparison of the charged-particle pseudorapidity densities for three widely different collision systems, pp, pPb, and PbPb, at the top energy of the Large Hadron Collider (√sNN=5.02TeV) measured over a wide pseudorapidity range (−3.5<η<5), the widest possible among the four experiments at that facility. The systematic uncertainties are minimised since the measurements are recorded by the same experimental apparatus (ALICE). The distributions for pPb and PbPb collisions are determined as a function of the centrality of the collisions, while results from pp collisions are reported for inelastic events with at least one charged particle at midrapidity. The charged-particle pseudorapidity densities are, under simple and robust assumptions, transformed to charged-particle rapidity densities. This allows for the calculation and the presentation of the evolution of the width of the rapidity distributions and of a lower bound on the Bjorken energy density, as a function of the number of participants in all three collision systems. We find a decreasing width of the particle production, and roughly a smooth ten fold increase in the energy density, as the system size grows, which is consistent with a gradually higher dense phase of matter.
We present the first systematic comparison of the charged-particle pseudorapidity densities for three widely different collision systems, pp, p-Pb, and Pb-Pb, at the top energy of the Large Hadron Collider (sNN−−−√=5.02 TeV) measured over a wide pseudorapidity range (−3.5<η<5), the widest possible among the four experiments at that facility. The systematic uncertainties are minimised since the measurements are recorded by the same experimental apparatus (ALICE). The distributions for p-Pb and Pb-Pb collisions are determined as a function of the centrality of the collisions, while results from pp collisions are reported for inelastic events with at least one charged particle at midrapidity. The charged-particle pseudorapidity densities are, under simple and robust assumptions, transformed to charged-particle rapidity densities. This allows for the calculation and the presentation of the evolution of the width of the rapidity distributions and of a lower bound on the Bjorken energy density, as a function of the number of participants in all three collision systems. We find a decreasing width of the particle production, and roughly a smooth ten fold increase in the energy density, as the system size grows, which is consistent with a gradually higher dense phase of matter.
The first measurements of K∗(892)0 resonance production as a function of charged-particle multiplicity in Xe−Xe collisions at sNN−−−√= 5.44 TeV and pp collisions at s√= 5.02 TeV using the ALICE detector are presented. The resonance is reconstructed at midrapidity (|y|<0.5) using the hadronic decay channel K∗0→K±π∓. Measurements of transverse-momentum integrated yield, mean transverse-momentum, nuclear modification factor of K∗0, and yield ratios of resonance to stable hadron (K∗0/K) are compared across different collision systems (pp, p−Pb, Xe−Xe, and Pb−Pb) at similar collision energies to investigate how the production of K∗0 resonances depends on the size of the system formed in these collisions. The hadronic rescattering effect is found to be independent of the size of colliding systems and mainly driven by the produced charged-particle multiplicity, which is a proxy of the volume of produced matter at the chemical freeze-out. In addition, the production yields of K∗0 in Xe−Xe collisions are utilized to constrain the dependence of the kinetic freeze-out temperature on the system size using HRG-PCE model.
A newly developed observable for correlations between symmetry planes, which characterize the direction of the anisotropic emission of produced particles, is measured in Pb-Pb collisions at sNN−−−√=2.76 TeV with ALICE. This so-called Gaussian Estimator allows for the first time the study of these quantities without the influence of correlations between different flow amplitudes. The centrality dependence of various correlations between two, three and four symmetry planes is presented. The ordering of magnitude between these symmetry plane correlations is discussed and the results of the Gaussian Estimator are compared with measurements of previously used estimators. The results utilizing the new estimator lead to significantly smaller correlations than reported by studies using the Scalar Product method. Furthermore, the obtained symmetry plane correlations are compared to state-of-the-art hydrodynamic model calculations for the evolution of heavy-ion collisions. While the model predictions provide a qualitative description of the data, quantitative agreement is not always observed, particularly for correlators with significant non-linear response of the medium to initial state anisotropies of the collision system. As these results provide unique and independent information, their usage in future Bayesian analysis can further constrain our knowledge on the properties of the QCD matter produced in ultrarelativistic heavy-ion collisions.
A newly developed observable for correlations between symmetry planes, which characterize the direction of the anisotropic emission of produced particles, is measured in Pb-Pb collisions at sNN−−−√=2.76 TeV with ALICE. This so-called Gaussian Estimator allows for the first time the study of these quantities without the influence of correlations between different flow amplitudes. The centrality dependence of various correlations between two, three and four symmetry planes is presented. The ordering of magnitude between these symmetry plane correlations is discussed and the results of the Gaussian Estimator are compared with measurements of previously used estimators. The results utilizing the new estimator lead to significantly smaller correlations than reported by studies using the Scalar Product method. Furthermore, the obtained symmetry plane correlations are compared to state-of-the-art hydrodynamic model calculations for the evolution of heavy-ion collisions. While the model predictions provide a qualitative description of the data, quantitative agreement is not always observed, particularly for correlators with significant non-linear response of the medium to initial state anisotropies of the collision system. As these results provide unique and independent information, their usage in future Bayesian analysis can further constrain our knowledge on the properties of the QCD matter produced in ultrarelativistic heavy-ion collisions.
A newly developed observable for correlations between symmetry planes, which characterize the direction of the anisotropic emission of produced particles, is measured in Pb-Pb collisions at sNN−−−√=2.76 TeV with ALICE. This so-called Gaussian Estimator allows for the first time the study of these quantities without the influence of correlations between different flow amplitudes. The centrality dependence of various correlations between two, three and four symmetry planes is presented. The ordering of magnitude between these symmetry plane correlations is discussed and the results of the Gaussian Estimator are compared with measurements of previously used estimators. The results utilizing the new estimator lead to significantly smaller correlations than reported by studies using the Scalar Product method. Furthermore, the obtained symmetry plane correlations are compared to state-of-the-art hydrodynamic model calculations for the evolution of heavy-ion collisions. While the model predictions provide a qualitative description of the data, quantitative agreement is not always observed, particularly for correlators with significant non-linear response of the medium to initial state anisotropies of the collision system. As these results provide unique and independent information, their usage in future Bayesian analysis can further constrain our knowledge on the properties of the QCD matter produced in ultrarelativistic heavy-ion collisions.
We use the topological heavy fermion (THF) model and its Kondo Lattice (KL) formulation to study the symmetric Kondo state in twisted bilayer graphene. Via a large-N approximation, we find a symmetric Kondo (SK) state in KL mode at fillings ν=0,±1,±2. In the SK state, all symmetries are preserved and the local moments are Kondo screened by the conduction electrons. At the mean-field level of the THF model at ν=0,±1,±2,±3, we also find a similar symmetric state. We study the stability of the symmetric state by comparing its energy with the ordered states and find the ordered states to have lower energy. However, moving away from integer fillings by doping holes to the light bands, we find the energy difference is reduced, which suggests the loss of ordering and a tendency towards Kondo screening. In order to include many-body effects beyond the mean-field approximation, we perform dynamical mean-field theory (DMFT) calculations on the THF model. We find the spin susceptibility follows a Curie behavior at ν=0,±1,±2 down to ∼2K where the onset of screening of the local moment becomes visible. This hints to very low Kondo temperatures at these fillings, in agreement with the outcome of our mean-field calculations. At non-integer filling ν=±0.5,±0.8,±1.2 DMFT shows deviations from a 1/T-susceptibility at much higher temperatures, suggesting a more effective screening of local moments with doping. Finally, we study the effect of a C3z-rotational-symmetry-breaking strain via mean-field approaches and find that a symmetric phase (that only breaks C3z symmetry) can be stabilized at sufficiently large strain at ν=0,±1,±2. Our results suggest that a symmetric Kondo phase is strongly suppressed at integer fillings, but could be stabilized either at non-integer fillings or by applying strain.
Studying strangeness and baryon production mechanisms through angular correlations between charged
(2023)
The angular correlations between charged Ξ baryons and associated identified hadrons (pions, kaons, protons, Λ baryons, and Ξ baryons) are measured in pp collisions at s√=13 TeV with the ALICE detector to give insight into the particle production mechanisms and balancing of quantum numbers on the microscopic level. In particular, the distribution of strangeness is investigated in the correlations between the doubly-strange Ξ baryon and mesons and baryons that contain a single strange quark, K and Λ. As a reference, the results are compared to Ξπ and Ξp correlations, where the associated mesons and baryons do not contain a strange valence quark. These measurements are expected to be sensitive to whether strangeness is produced through string breaking or in a thermal production scenario. Furthermore, the multiplicity dependence of the correlation functions is measured to look for the turn-on of additional particle production mechanisms with event activity. The results are compared to predictions from the string-breaking model PYTHIA 8, including tunes with baryon junctions and rope hadronisation enabled, the cluster hadronisation ly or qualitatively by the Monte Carlo models, no one model can match all features of the data. These results provide stringent constraints on the strangeness and baryon number production mechanisms in pp collisions.
The interactions of kaons (K) and antikaons (K¯¯¯¯) with few nucleons (N) were studied so far using kaonic atom data and measurements of kaon production and interaction yields in nuclei. Some details of the three-body KNN and K¯¯¯¯NN dynamics are still not well understood, mainly due to the overlap with multi-nucleon interactions in nuclei. An alternative method to probe the dynamics of three-body systems with kaons is to study the final state interaction within triplet of particles emitted in pp collisions at the Large Hadron Collider, which are free from effects due to the presence of bound nucleons. This Letter reports the first femtoscopic study of p−p−K+ and p−p−K− correlations measured in high-multiplicity pp collisions at s√ = 13 TeV by the ALICE Collaboration. The analysis shows that the measured p−p−K+ and p−p−K− correlation functions can be interpreted in terms of pairwise interactions in the triplets, indicating that the dynamics of such systems is dominated by the two-body interactions without significant contributions from three-body effects or bound states.
Using 15.6 fb−1 of e+e− collision data collected at twenty-four center-of-mass energies from 4.0 to 4.6 GeV with the BESIII detector, the helicity amplitudes of the process e+e−→π+π−ω are analyzed for the first time. Born cross section measurements of two-body intermediate resonance states with statistical significance greater than 5σ are presented, such as f0(500), f0(980), f2(1270), f0(1370), b1(1235)±, and ρ(1450)±. In addition, evidence of a resonance state in e+e−→π+π−ω production is found. The mass of this state obtained by line shape fitting is about 4.2 GeV/c2, which is consistent with the production of ψ(4160) or Y(4220).
Using 15.6 fb−1 of e+e− collision data collected at twenty-four center-of-mass energies from 4.0 to 4.6 GeV with the BESIII detector, the helicity amplitudes of the process e+e− → π+π−ω are analyzed for the first time. Born cross section measurements of two-body intermediate resonance states with statistical significance greater than 5σ are presented, such as f0(500), f0(980), f2(1270), f0(1370), b1(1235)±, and ρ(1450)±. In addition, evidence of a resonance state in e+e− → π+π−ω production is found. The mass of this state obtained by line shape fitting is about 4.2 GeV/c2, which is consistent with the production of ψ(4160) or Y(4220).
Based on (10.09±0.04)×109 J/ψ events collected with the BESIII detector operating at the BEPCII collider, a partial wave analysis of the decay J/ψ→ϕπ0η is performed. We observe for the first time two new structures on the ϕη invariant mass distribution, with statistical significances of 24.0σ and 16.9σ; the first with JPC = 1+−, mass M = (1911 ± 6 (stat.) ± 14 (sys.))~MeV/c2, and width Γ= (149 ± 12 (stat.) ± 23 (sys.))~MeV, the second with JPC = 1−−, mass M = (1996 ± 11 (stat.) ± 30 (sys.))~MeV/c2, and width Γ = (148 ± 16 (stat.) ± 66 (sys.))~MeV. These measurements provide important input for the strangeonium spectrum. In addition, the f0(980)−a0(980)0 mixing signal in J/ψ→ϕf0(980)→ϕa0(980)0 and the corresponding electromagnetic decay J/ψ→ϕa0(980)0 are measured with improved precision, providing crucial information to understand the nature of a0(980)0 and f0(980).
Based on (10.09±0.04)×109 J/ψ events collected with the BESIII detector operating at the BEPCII collider, a partial wave analysis of the decay J/ψ→ϕπ0η is performed. We observe for the first time two new structures on the ϕη invariant mass distribution, with statistical significances of 24.0σ and 16.9σ; the first with JPC = 1+−, mass M = (1911 ± 6 (stat.) ± 14 (sys.))~MeV/c2, and width Γ= (149 ± 12 (stat.) ± 23 (sys.))~MeV, the second with JPC = 1−−, mass M = (1996 ± 11 (stat.) ± 30 (sys.))~MeV/c2, and width Γ = (148 ± 16 (stat.) ± 66 (sys.))~MeV. These measurements provide important input for the strangeonium spectrum. In addition, the f0(980)−a0(980)0 mixing signal in J/ψ→ϕf0(980)→ϕa0(980)0 and the corresponding electromagnetic decay J/ψ→ϕa0(980)0 are measured with improved precision, providing crucial information to understand the nature of a0(980)0 and f0(980).
Study of flavor dependence of the baryon-to-meson ratio in proton–proton collisions at √s= 13 TeV
(2023)
The production cross sections of D0 and Λ+c hadrons originating from beauty-hadron decays (i.e. non-prompt) were measured for the first time at midrapidity (|y|<0.5) by the ALICE Collaboration in proton-proton collisions at a center-of-mass energy s√=13 TeV. They are described within uncertainties by perturbative QCD calculations employing the fragmentation fractions of beauty quarks to baryons measured at forward rapidity by the LHCb Collaboration. The bb¯¯¯ production cross section per unit of rapidity at midrapidity, estimated from these measurements, is dσbb¯¯¯/dy||y|<0.5=83.1±3.5(stat.)±5.4(syst.)+12.3−3.2(extrap.)μb. The baryon-to-meson ratios are computed to investigate the hadronization mechanism of beauty quarks. The non-prompt Λ+c/D0 production ratio has a similar trend to the one measured for the promptly produced charmed particles and to the p/π+ and Λ/K0S ratios, suggesting a similar baryon-formation mechanism among light, strange, charm, and beauty hadrons. The pT-integrated non-prompt Λc/D0 ratio is found to be significantly higher than the one measured in e+e− collisions.
This letter reports measurements which characterize the underlying event associated with hard scatterings at mid-pseudorapidity (|η|<0.8) in pp, p−Pb and Pb−Pb collisions at centre-of-mass energy per nucleon pair, sNN−−−√=5.02 TeV. The measurements are performed with ALICE at the LHC. Different multiplicity classes are defined based on the event activity measured at forward rapidities. The hard scatterings are identified by the leading particle defined as the charged particle with the largest transverse momentum (pT) in the collision and having 8<pT<15 GeV/c. The pT spectra of associated particles (0.5≤pT<6 GeV/c) are measured in different azimuthal regions defined with respect to the leading particle direction: toward, transverse, and away. The associated charged particle yields in the transverse region are subtracted from those of the away and toward regions. The remaining jet-like yields are reported as a function of the multiplicity measured in the transverse region. The measurements show a suppression of the jet-like yield in the away region and an enhancement of high-pT associated particles in the toward region in central Pb−Pb collisions, as compared to minimum-bias pp collisions. These observations are consistent with previous measurements that used two-particle correlations, and with an interpretation in terms of parton energy loss in a high-density quark gluon plasma. These yield modifications vanish in peripheral Pb−Pb collisions and are not observed in either high-multiplicity pp or p−Pb collisions.
This letter reports measurements which characterize the underlying event associated with hard scatterings at mid-pseudorapidity (|η|<0.8) in pp, p−Pb and Pb−Pb collisions at centre-of-mass energy per nucleon pair, sNN−−−√=5.02 TeV. The measurements are performed with ALICE at the LHC. Different multiplicity classes are defined based on the event activity measured at forward rapidities. The hard scatterings are identified by the leading particle defined as the charged particle with the largest transverse momentum (pT) in the collision and having 8<pT<15 GeV/c. The pT spectra of associated particles (0.5≤pT<6 GeV/c) are measured in different azimuthal regions defined with respect to the leading particle direction: toward, transverse, and away. The associated charged particle yields in the transverse region are subtracted from those of the away and toward regions. The remaining jet-like yields are reported as a function of the multiplicity measured in the transverse region. The measurements show a suppression of the jet-like yield in the away region and an enhancement of high-pT associated particles in the toward region in central Pb−Pb collisions, as compared to minimum-bias pp collisions. These observations are consistent with previous measurements that used two-particle correlations, and with an interpretation in terms of parton energy loss in a high-density quark gluon plasma. These yield modifications vanish in peripheral Pb−Pb collisions and are not observed in either high-multiplicity pp or p−Pb collisions.
Das Experiment ALICE (A Large Ion Collider Experiment) am CERN (Conseil Européen pour la Recherche Nucléaire) LHC (Large Hadron Collider) fokussiert sich auf die Untersuchung stark wechselwirkender Materie unter extremen Bedingungen. Solche Bedingungen existierten wenige Mikrosekunden nach dem Urknall, als die Temperaturen so hoch waren, dass Partonen (Quarks und Gluonen) nicht zu farbneutralen Hadronen gebunden waren. In solch einem Quark-Gluon-Plasma können sich die Partonen frei bewegen, wobei sie allerdings mit anderen Partonen aus dem Medium stark wechselwirken. Am LHC werden Bleikerne auf ultra-relativistische Energien von bis zu 2.68 TeV beschleunigt und zur Kollision gebracht, wobei für weniger als 10 fm/c ein QGP entsteht, das schnell expandiert. Die Partonen hadronisieren, wenn das QGP sich auf Temperaturen von weniger als der Phasenübergangstemperatur von ≈155MeV abkühlt. Die finalen Teilchen- und Impulsverteilungen werden werden vom ALICE Detektor gemessen und geben Aufschluss auf elementare Prozesse im QGP.
Die TPC (Time Projection Chamber ) ist eines der wichtigsten Detektorsysteme von ALICE. Sie trägt maßgeblich zur Rekonstruktion von Teilchenspuren und zur Identifikation der Teilchensorten bei mittleren Rapiditäten bei. Die TPC ist eine große zylindrische Spurendriftkammer und besteht aus einem 88mˆ3 großen Gasvolumen, das von der zentralen Hochspannungselektrode in zwei Seiten geteilt wird. Durchquert ein Teilchen das Gasvolumen, ionisiert es entlang seiner Spur eine spezifische Menge von Gasatomen. Die Ionisationselektronen driften entlang des extrem homogenen elektrischen Feldes zu den Auslesekammern an den Endkappen auf beiden Seiten der TPC. Die Messung der Position und der Menge der Ionisationselektronen erlaubt die Rekonstruktion der Teilchenspur sowie, in Kombination mit der Impulsmessungen über die Krümmung der Teilchenspur im Magnetfeld, die Bestimmung der Teilchensorte über den spezifischen Energieverlust pro Wegstrecke im Gas. Das Gasvolumen der TPC war in LHC Run 1 (2010–2013) mit Ne-CO_2 (90-10) gefüllt. Die Gasmischung wurde zu Ar-CO_2 (88-12) für Run 2 (2015–2018) geändert. Als Auslesekammern wurden Vieldrahtproportionalkammern verwendet, die aus einer segmentierten Ausleseebene, einer Anodendrahtebene, einer Kathodendrahtebene und einem Gating-Grid (GG) bestehen. Das GG is eine zusätzliche Drahtebene, die durch zwei verschiedene Spannungseinstellungen transparent oder undurchlässig für Elektronen und positive Ionen geschaltet werden kann.
In den ersten Daten von Run 2 bei hohen Interaktionsraten wurden große Verzerrungen der gemessenen Spurpunkte beobachtet, die auf Grund von Verzerrungen des Driftfeldes auftreten und nicht von Daten aus Run 1 bekannt waren. Diese Verzerrungen treten nur sehr lokal an den Grenzen von manchen der inneren Auslesekammern (IROCs) auf. Zudem wurden auch große Verzerrungen in einer (C06) der äußeren Auslesekammern (OROCs) festgestellt, die sich bei einem bestimmten Radius über die ganze Breite der Kammer erstrecken. Die Ergebnisse dieser Arbeit befassen sich mit der Untersuchung jener Verzerrungen und ihrer Ursache, sowie mit der Entwicklung von Strategien um die Verzerrungen zu minimieren.
Messungen der Verzerrungen in den IROCs und Vergleiche mit Simulationen lassen darauf schließen, dass die Verzerrungen von positiver Raumladung hervorgerufen werden, die durch Gasverstärkung an sehr begrenzten Regionen der Auslesekammern entsteht und sich durch das Driftvolumen bewegt. Es werden charakteristische Abhängigkeiten von der Interaktionsrate sowie systematische Veränderungen bei Umkehrung der Orientierung des Magnetfeldes gemessen. Eine erneute Analyse von Run 1 Daten mit den Methoden aus Run 2 zeigt, dass die Verzerrungen bereits in Run 1 auftraten, jedoch durch die Ne-Gasmischung und niedrigere Interaktionsraten um eine Größenordnung kleiner waren. Neue Daten aus Run 2, für die die Gasmischung zeitweise wieder von Ar-CO_2 zu Ne-CO_2- N_2 geändert wurde, bestätigen die Ergebnisse der Run 1 Datenanalyse. Der Ursprung der Raumladung wird systematisch eingegrenzt. Es werden einzelne IROCs identifiziert, an deren Anodendrähten die Raumladung entsteht. Physikalische Modelle ermöglichen es, die Entstehung der Raumladung auf das Volumen zurückzuführen, das sich zwischen zwei IROCs befindet. Damit besteht die Vermutung, dass einzelne Spitzen von Anodendrähten am äußeren Rand dieser IROCs in das Gasvolumen hineinragen und somit hohe elektrische Felder erzeugen, an denen Gasverstärkung stattfindet. Die positiven Ionen können dann ungehindert in das Driftvolumen gelangen. Um diesen Effekt zu unterdrücken, wird das Potential der Cover-Elektroden angepasst, die sich auf den Befestigungsvorrichtungen der Drahtebenen an den Kammerrändern befinden. Dadurch kann die Menge von Ionisationselektronen, die in das Volumen zwischen zwei IROCs hineindriftet und vervielfacht wird, eingeschränkt werden. Über elektro-statische Simulationen und Messungen wird eine Einstellung für das Cover-Elektroden-Potential gefunden, mit der die Verzerrungen auf 30 % reduziert werden können. Die Verzerrungen in OROC C06 entstehen durch positive Ionen, die aus der Verstärkungsregion in das Driftvolumen gelangen, da an dieser bestimmten Stelle zwei aufeinanderfolgende GG-Drähte den Kontakt verloren haben. Die Verzerrungen werden um mehr als einen Faktor 3 reduziert, indem die Hochspannung der Anodendrähte um 50 V und somit der Gasverstärkungsfaktor um einen Faktor 2 verringert wird und indem das Potential der noch funktionierenden GG-Drähte erhöht wird.
Zusammenfassend konnten die lokalen Raumladungsverzerrungen für die letzte Pb−Pb Strahlzeit von Run 2 auf weniger als 1cm bei den höchsten Interaktionsraten verringert werden. Zudem wurde der Anteil des von Raumladungsverzerrungen betroffenen Volumens der TPC signifikant verringert, sodass die ursprüngliche Auflösung der Spurrekonstruktion wieder erreicht werden konnte.
Human feline leukaemia virus subgroup C receptor-related proteins 1 and 2 (FLVCR1 and 2) are major facilitator superfamily transporters from the solute carrier family 49. Dysregulation of these ubiquitous transporters has been linked to various haematological and neurological disorders. While both FLVCRs were initially proposed to hold a physiological function in heme transport, subsequent studies questioned this notion. Here, we used structural, computational and biochemical methods and conclude that these two FLVCRs function as human choline transporters. We present cryo-electron microscopy structures of FLVCRs in different inward- and outward-facing conformations, captured in the apo state or in complex with choline in their translocation pathways. Our findings provide insights into the molecular framework of choline coordination and transport, largely mediated by conserved cation-π interactions, and further illuminate the conformational dynamics of the transport cycle. Moreover, we identified a heme binding site on the protein surface of the FLVCR2 N-domain, and observed that heme actively drives the conformational transitions of the protein. This auxiliary binding site might indicate a potential regulatory role of heme in the FLVCR2 transport mechanisms. Our work resolves the contested substrate specificity of the FLVCRs, and sheds light on the process of maintaining cellular choline homeostasis at the molecular level.
Human feline leukemia virus subgroup C receptor-related proteins 1 and 2 (FLVCR1 and 2) are members of the major facilitator superfamily1. Their dysfunction is linked to several clinical disorders, including PCARP, HSAN, and Fowler syndrome2–7. Earlier studies concluded that FLVCR1 may function as a putative heme exporter8–12, while FLVCR2 was suggested to act as a heme importer13, yet conclusive biochemical and detailed molecular evidence remained elusive for the function of both transporters14–17. Here, we show that FLVCR1 and FLVCR2 facilitate the transport of choline and ethanolamine across human plasma membranes, utilizing a concentration-driven substrate translocation process. Through structural and computational analyses, we have identified distinct conformational states of FLVCRs and unraveled the coordination chemistry underlying their substrate interactions. Within the binding pocket of both transporters, we identify fully conserved tryptophan and tyrosine residues holding a central role in the formation of cation-π interactions, essential for choline and ethanolamine selectivity. Our findings not only clarify the mechanisms of choline and ethanolamine transport by FLVCR1 and FLVCR2, enhancing our comprehension of disease-associated mutations that interfere with these vital processes, but also shed light on the conformational dynamics of these MFS-type proteins during the transport cycle.
Topological semimetal antiferromagnets provide a rich source of exotic topological states which can be controlled by manipulating the orientation of the Néel vector, or by modulating the lattice parameters through strain. We investigate via ab initio density functional theory calculations, the effects of shear strain on the bulk and surface states n two antiferromagnetic EuCd2As2 phases with out-of-plane and in-plane spin configurations. When magnetic moments are along the c-axis, a 3% longitudinal or diagonal shear strain can tune the Dirac semimetal phase to an axion insulator phase, characterized by the parity-based invariant η4I=2. For an in-plane magnetic order, the axion insulator phase remains robust under all shear strains. We further find that for both magnetic orders, the bulk gap increases and a surface gap opens on the (001) surface up to 16 meV. Because of a nonzero η4I index and gapped states on the (001) surface, hinge modes are expected to happen on the side surface states between those gapped surface states. This result can provide a valuable insight in the realization of the long-sought axion states.
In this work, inhomogeneous chiral phases are studied in a variety of Four-Fermion and Yukawa models in 2+1 dimensions at zero and non-zero temperature and chemical potentials. Employing the mean-field approximation, we do not find indications for an inhomogeneous phase in any of the studied models. We show that the homogeneous phases are stable against inhomogeneous perturbations. At zero temperature, full analytic results are presented.
In this thesis, we present a detailed consideration of both qualitative and quantitative properties of static spherically symmetric solutions of the Einstein equations with self-interacting scalar fields. Our focus is on solutions with naked singularities. We study the qualitative properties of the solutions of the Einstein equations with real static self-interacting $N$ scalar fields, making some assumptions on self-interaction. We provide a rigorous proof that the corresponding solutions will be regular up to $r=0$. Furthermore, we find the rigorous form of asymptotic solutions near the singularity and at spatial infinity. We construct some examples of spherical-like naked singularities at $r=r_s\neq0$ in curvature coordinates.
We analyze the stability of the previously considered solutions against odd-parity gravitational perturbations and also examine the fundamental quasi-normal modes spectra. For the general class of the self-interaction potential, we demonstrate well-posedness of the initial problem and stability for positively defined potentials. As an example, we numerically study the case of the scalar field with power-law self-interaction potential and find the fundamental quasi-normal modes frequencies. We demonstrate that they differ from the standard Schwarzschild black hole case.
We study in detail the motion of particles in the vicinity of previously considered solutions. Mainly, we are interested in considering properties of the distribution of stable circular orbits around the corresponding configurations and images of the accretion disk for a distant observer. For all cases, we find possible types of stable circular orbit distributions and domains of parameters where they are realized.
We also demonstrate that the presence of self-interaction can lead to a new type of circular orbit distributions, which is absent in the linear massless scalar field case. We build Keplerian disk images in the plane of a distant observer and demonstrate the possibility to mimic the shadows of black holes.
The first measurements of skewness and kurtosis of mean transverse momentum (⟨pT⟩) fluctuations are reported in Pb−Pb collisions at sNN−−−√ = 5.02 TeV, Xe−Xe collisions at sNN−−−√ = 5.44 TeV and pp collisions at s√=5.02 TeV using the ALICE detector. The measurements are carried out as a function of system size ⟨dNch/dη⟩1/3|η|<0.5, using charged particles with transverse momentum (pT) and pseudorapidity (η), in the range 0.2<pT<3.0 GeV/c and |η|<0.8, respectively. In Pb−Pb and Xe−Xe collisions, positive skewness is observed in the fluctuations of ⟨pT⟩ for all centralities, which is significantly larger than what would be expected in the scenario of independent particle emission. This positive skewness is considered a crucial consequence of the hydrodynamic evolution of the hot and dense nuclear matter created in heavy-ion collisions. Furthermore, similar observations of positive skewness for minimum bias pp collisions are also reported here. Kurtosis of ⟨pT⟩ fluctuations is found to be in good agreement with the kurtosis of Gaussian distribution, for most central Pb−Pb collisions. Hydrodynamic model calculations with MUSIC using Monte Carlo Glauber initial conditions are able to explain the measurements of both skewness and kurtosis qualitatively from semicentral to central collisions in Pb--Pb system. Color reconnection mechanism in PYTHIA8 model seems to play a pivotal role in capturing the qualitative behavior of the same measurements in pp collisions.
We report on the first search for ¯Λ−Λ oscillations in the decay 𝐽/𝜓→𝑝𝐾−¯Λ+c.c. by analyzing 1.31×109 𝐽/𝜓 events accumulated with the BESIII detector at the BEPCII collider. The 𝐽/𝜓 events are produced using 𝑒+𝑒− collisions at a center of mass energy √𝑠=3.097 GeV. No evidence for hyperon oscillations is observed. The upper limit for the oscillation rate of ¯Λ to Λ hyperons is determined to be 𝒫(Λ)=[ℬ(𝐽/𝜓→𝑝𝐾−Λ+c.c.)/ℬ(𝐽/𝜓→𝑝𝐾−¯Λ+c.c.)]<4.4×10−6 corresponding to an oscillation parameter 𝛿𝑚Λ¯Λ of less than 3.8×10−18 GeV at the 90% confidence level.
We search for the semi-leptonic decays Λ + c → Λπ+π−e+νe and Λ + c → pK0 Sπ−e+νe in a sample of 4.5 fb−1 of e+e− annihilation data collected in the center-of-mass energy region between 4.600 GeV and 4.699 GeV by the BESIII detector at the BEPCII. No significant signals are observed, and the upper limits on the decay branching fractions are set to be B(Λ+c → Λπ+π−e+νe ) < 3.9 × 10−4 and B(Λ + c → pK0Sπ−e+νe ) < 3.3 × 10−4 at the 90% confidence level, respectively.
The ALICE Collaboration reports a search for jet quenching effects in high-multiplicity (HM) proton−proton collisions at s√ = 13 TeV, using the semi-inclusive azimuthal-difference distribution Δφ of charged-particle jets recoiling from a high transverse momentum (high-pT,trig) trigger hadron. Jet quenching may broaden the Δφ distribution measured in HM events compared to that in minimum bias (MB) events. The measurement employs a pT,trig-differential observable for data-driven suppression of the contribution of multiple partonic interactions, which is the dominant background. While azimuthal broadening is indeed observed in HM compared to MB events, similar broadening for HM events is observed for simulations based on the PYTHIA 8 Monte Carlo generator, which does not incorporate jet quenching. We elucidate the origin of the broadening by comparing biases induced by HM selection in the data and simulations, and discuss its implications for the study of jet quenching in small collision systems.
We report a search for a dark photon using 14.9~fb−1 of e+e− annihilation data taken at center-of-mass energies from 4.13 to 4.60~GeV with the BESIII detector operated at the BEPCII storage ring. The dark photon is assumed to be produced in the radiative annihilation process of e+e− and to predominantly decay into light dark matter particles, which escape from the detector undetected. The mass range from 1.5 to 2.9~GeV is scanned for the dark photon candidate, and no significant signal is observed. The mass dependent upper limits at the 90% confidence level on the coupling strength parameter ϵ for a dark photon coupling with an ordinary photon vary between 1.6×10−3 and 5.7×10−3.
We report a search for a heavier partner of the recently observed Zcs(3985)− state, denoted as Z′−cs, in the process e+e−→K+D∗−sD∗0+c.c., based on e+e− collision data collected at the center-of-mass energies of s√=4.661, 4.682 and 4.699 GeV with the BESIII detector. The Z′−cs is of interest as it is expected to be a candidate for a hidden-charm and open-strange tetraquark. A partial-reconstruction technique is used to isolate K+ recoil-mass spectra, which are probed for a potential contribution from Z′−cs→D∗−sD∗0 (c.c.). We find an excess of Z′−cs→D∗−sD∗0 (c.c.) candidates with a significance of 2.1σ, after considering systematic uncertainties, at a mass of (4123.5±0.7stat.±4.7syst.) MeV/c2. As the data set is limited in size, the upper limits are evaluated at the 90\% confidence level on the product of the Born cross sections (σBorn) and the branching fraction (B) of Z′−cs→D∗−sD∗0, under different assumptions of the Z′−cs mass from 4.120 to 4.140 MeV and of the width from 10 to 50 MeV at the three center-of-mass energies. The upper limits of σBorn⋅B are found to be at the level of O(1) pb at each energy. Larger data samples are needed to confirm the Z′−cs state and clarify its nature in the coming years.
A search has been performed for the semileptonic decays D0→K0SK−e+νe, D+→K0SK0Se+νe and D+→K+K−e+νe, using 7.9 fb−1 of e+e− annihilation data collected at the center-of-mass energy s√=3.773 GeV by the BESIII detector operating at the BEPCII collider. No significant signals are observed, and upper limits are set at the 90\% confidence level of 2.13×10−5, 1.54×10−5 and 2.10×10−5 for the branching fractions of D0→K0SK−e+νe, D+→K0SK0Se+νe and D+→K+K−e+νe, respectively.
Using (1.0087±0.0044)×1010 𝐽/𝜓 events collected by the BESIII detector at the BEPCII collider, we report the first search for the baryon and lepton number violating decays Ξ0→𝐾−𝑒+ with Δ(𝐵−𝐿)=0 and Ξ0→𝐾+𝑒− with |Δ(𝐵−𝐿)|=2, where 𝐵 (𝐿) is the baryon (lepton) number. While no signal is observed, the upper limits on the branching fractions of these two decays are set to ℬ(Ξ0→𝐾−𝑒+)<3.6×10−6 and ℬ(Ξ0→𝐾+𝑒−)<1.9×10−6 at the 90% confidence level, respectively. These results offer a direct probe of baryon number violating interactions involving a strange quark.
A light scalar X0 or vector X1 particles have been introduced as a possible explanation for the (g−2)μ anomaly and dark matter phenomena.
Using (8.998±0.039)×109 $\jpsi$ events collected by the BESIII detector, we search for a light muon philic scalar X0 or vector X1 in the processes J/ψ→μ+μ−X0,1 with X0,1 invisible decays. No obvious signal is found, and the upper limits on the coupling g′0,1 between the muon and the X0,1 particles are set to be between 1.1×10−3 and 1.0×10−2 for the X0,1 mass in the range of 1<M(X0,1)<1000~MeV/c2 at 90% confidence level.
We search for an axion-like particle (ALP) a through the process ψ(3686)→π+π−J/ψ, J/ψ→γa, a→γγ in a data sample of (2.71±0.01)×109 ψ(3686) events collected by the BESIII detector. No significant ALP signal is observed over the expected background, and the upper limits on the branching fraction of the decay J/ψ→γa and the ALP-photon coupling constant gaγγ are set at 95% confidence level in the mass range of 0.165≤ma≤2.84GeV/c2. The limits on B(J/ψ→γa) range from 8.3×10−8 to 1.8×10−6 over the search region, and the constraints on the ALP-photon coupling are the most stringent to date for 0.165≤ma≤1.468GeV/c2.
We search for an axion-like particle (ALP) a through the process ψ(3686)→π+π−J/ψ, J/ψ→γa, a→γγ in a data sample of (2.71±0.01)×109 ψ(3686) events collected by the BESIII detector. No significant ALP signal is observed over the expected background, and the upper limits on the branching fraction of the decay J/ψ→γa and the ALP-photon coupling constant gaγγ are set at 95% confidence level in the mass range of 0.165≤ma≤2.84GeV/c2. The limits on B(J/ψ→γa) range from 8.3×10−8 to 1.8×10−6 over the search region, and the constraints on the ALP-photon coupling are the most stringent to date for 0.165 ≤ ma ≤ 1.468GeV/c2.
We search for an axion-like particle (ALP) a through the process ψ(3686)→π+π−J/ψ, J/ψ→γa, a→γγ in a data sample of (2.71±0.01)×109 ψ(3686) events collected by the BESIII detector. No significant ALP signal is observed over the expected background, and the upper limits on the branching fraction of the decay J/ψ→γa and the ALP-photon coupling constant gaγγ are set at 95% confidence level in the mass range of 0.165≤ma≤2.84GeV/c2. The limits on B(J/ψ→γa) range from 8.3×10−8 to 1.8×10−6 over the search region, and the constraints on the ALP-photon coupling are the most stringent to date for 0.165≤ma≤1.468GeV/c2.
DIE ARCHITEKTUR DER ZELLE : Wie sehen die Bausteine des Lebens genau aus, wie interagieren die zellulären Akteure miteinander? Im Rahmen der Exzellenzcluster-Initiative SCALE (Subcellular Architecture of Life) wollen Frankfurter Wissenschaftlerinnen und Wissenschaftler diesen wichtigen Fragen nachgehen. Das Projekt ist interdisziplinär: Mehrere Forschungsgruppen, deren Schwerpunkt Biophysik ist, arbeiten zusammen. Der Biophysiker Achilleas Frangakis und die Bioinformatikerin Kathi Zarnack sind auch dabei. Sie verfolgen im Rahmen des Projekts große Ziele.
RuO₂: a puzzle to be solved
(2023)
Altermagnetism is a topic that has lately been gaining attention and the RuO2 compound is among one of the most studied altermagnetic candidates. However, the survey of available literature on RuO2 properties suggests that there is no consensus about the magnetism of this material. By performing density functional theory calculations, we show that the electronic properties of stoichiometric RuO2 are described in terms of a smaller Hubbard U within DFT+U than the value required to have magnetism. We further argue that Ru vacancies can actually aid the formation of a magnetic state in RuO2. This in turn suggests that a characterization of the amount of Ru vacancies in experimental samples might help the resolution of the controversy between the different experimental results.
In this thesis, the early time dynamics in a heavy ion collision of Pb-Nuclei at LHC center-of-mass energies of 5 TeV is studied. Right after the collision the system is out-of-equilibrium and essentially gluon dominated, with their density saturating at a specific momentum scale Q_s. Based on a separation of scales for the soft and hard gluonic degrees of freedom, the initial state is given from an effective model, known as the Color Glass Condensate. Within this model, the soft gluons behave classical to leading order, making it possible to study their dynamics in gauge invariant fashion on a three dimensional lattice, solving Hamiltonian field equations of motion, keeping real time. Quark-Antiquark pairs are produced in the gluonic medium, known as the Glasma and manifest themselves as a source of quantum fluctuations.
They enter the dynamics of the gluons as a current, making the system semi-classical. In lattice simulations, the non-equilibrium system is tested for pressure isotropization, which is a necessary ingredient to reach a local thermal equilibrium (LTE), making a hydrodynamical description at a later stage possible. In addition, the occupation of energy modes is studied with its implications on thermalization and classicality.
We study the production of the light JPC=1−+ hybrid isoscalars η1′(1855) and the yet undiscovered η1(1660) as intermediate states in the radiative decays of the charmonium (J/ψ) to two conventional mesons using a flavor symmetric Lagrangian. For this purpose, we use the J/ψ→γη1′(1855)→γηη′ process as the reference. We find that some of the decay channels have branching ratios similar to or larger than that of the γηη′ channel and are sensitive to the mixing between the hybrid isoscalars. We propose that relatively stable γηf1(1285) channel be explored for the presence of the light hybrid isoscalar η1hyb(1660). We also exploit the strong decay channels containing at least one vector meson to study the radiative decays of the whole hybrid nonet {π1(1600),K1hyb(1750),η1hyb(1660),η1′(1855)}. We find that the hybrids cannot radiatively decay into the I=0 pseudoscalars. Furthermore, the vector decay channels ((ρ/ω/ϕ)γ) of the hybrid isoscalars are sensitive to the strangeness content of the hybrids. We also provide estimates for the branching fractions for the radiative production and partial widths for the radiative decays of the hybrids.
Quarkyonic or baryquark matter? On the dynamical generation of momentum space shell structure
(2023)
We study the equation of state of a mixture of (quasi-)free constituent quarks and nucleons with hard-core repulsion at zero temperature. Two opposite scenarios for the realization of the Pauli exclusion principle are considered: (i) a Fermi sea of quarks surrounded by a shell of baryons – the quarkyonic matter, and (ii) a Fermi sea of nucleons surrounded by a shell of quarks which we call baryquark matter. In both scenarios, the sizes of the Fermi sea and shell are fixed through energy minimization at fixed baryon number density. While both cases yield a qualitatively similar transition from hadronic to quark matter, we find that baryquark matter is energetically favored in this setup and yields a physically acceptable behavior of the speed of sound without the need to introduce an infrared regulator. In order to retain the theoretically more appealing quarkyonic matter as the preferred form of dense QCD matter will thus require modifications to the existing dynamical generation mechanisms, such as, for example, the introduction of momentum-dependent nuclear interactions.
This thesis provides a detailed derivation of dissipative spin hydrodynamics from quantum field theory for systems composed of spin-0, spin-1/2, or spin-1 particles.
The Wigner function formalism is introduced for quantum fields in the respective representations of the Poincaré group, and the conserved currents, i.e., the energy-momentum tensor and the total angular momentum tensor, in various so-called pseudogauges are derived. An expansion around the semiclassical limit in powers of the Planck constant is performed.
Subsequently, kinetic equations are obtained for binary elastic scattering, using both the de Groot-van Leeuwen-van Weert and Kadanoff-Baym method, with the latter retaining the effect of quantum statistics. The resulting collision term features both local and nonlocal contributions, with the latter providing a relaxation mechanism for the spin degrees of freedom of the quasiparticles. The local-equilibrium distribution function is derived from the requirement that the local part of the collision term vanishes.
From quantum kinetic theory, dissipative spin hydrodynamics is then constructed via the method of moments, extended to particles with spin. The system of moment equations is closed via the Inverse-Reynolds Dominance (IReD) approach, resulting in a set of equations of motion describing the evolution of both ideal and dissipative degrees of freedom. The application to polarization phenomena relevant to heavy-ion collisions is discussed.
Seit hundert Jahren ist bekannt, dass die mikroskopische Welt der Atome und Moleküle von den Gesetzen der Quantenphysik regiert wird. Lange Zeit galten Quantenphänomene als verworren und unkontrollierbar. Heute arbeiten Physikerinnen und Physiker daran, unter Nutzung quantenphysikalischer Effekte Materialien mit neuartigen Eigenschaften zu kreieren.
The pseudorapidity dependence of elliptic (v2), triangular (v3), and quadrangular (v4) flow coefficients of charged particles measured in Pb-Pb collisions at a centre-of-mass energy per nucleon pair of sNN−−−√=5.02 TeV and in Xe-Xe collisions at sNN−−−√=5.44 TeV with ALICE at the LHC are presented. The measurements are performed in the pseudorapidity range −3.5<η<5 for various centrality intervals using two- and multi-particle cumulants with the subevent method. The flow probability density function (p.d.f.) is studied with the ratio of flow coefficient v2 calculated with four- and two-particle cumulant, and suggests that the variance of flow p.d.f. is independent of pseudorapidity. The decorrelation of the flow vector in the longitudinal direction is probed using two-particle correlations. The results measured with respect to different reference regions in pseudorapidity exhibit differences, argued to be a result of saturating decorrelation effect above a certain pseudorapidity separation, in contrast to previous publications which assign this observation to non-flow effects. The results are compared to 3+1 dimensional hydrodynamic and the AMPT transport model calculations. Neither of the models is able to simultaneously describe the pseudorapidity dependence of measurements of anisotropic flow and its fluctuations. The results presented in this work highlight shortcomings in our current understanding of initial conditions and subsequent system expansion in the longitudinal direction. Therefore, they provide input for its improvement.
The pseudorapidity density of charged particles with minimum transverse momentum (pT) thresholds of 0.15, 0.5, 1, and 2 GeV/c is measured in pp collisions at the centre of mass energies of s√= 5.02 and 13 TeV with the ALICE detector. The study is carried out for inelastic collisions with at least one primary charged particle having a pseudorapidity (η) within ±0.8 and pT larger than the corresponding threshold. In addition, measurements without pT-thresholds are performed for inelastic and non-single-diffractive events as well as for inelastic events with at least one charged particle having |η|<1 in pp collisions at s√= 5.02 TeV for the first time at the LHC. These measurements are compared to the PYTHIA 6, PYTHIA 8, and EPOS-LHC models. In general, the models describe the η dependence of particle production well. However, discrepancies are observed for the highest transverse momentum threshold (pT>2 GeV/c), highlighting the importance of such measurements for tuning event generators. The new measurements agree within uncertainties with results from the ATLAS and CMS experiments obtained at s√=13 TeV.
Results on proton and Λ flow, calculated with the UrQMD model that incorporates different realistic density dependent equations of state, are presented. It is shown that the proton and hyperon flow shows sensitivity to the equation of state and especially to the appearance of a phase transition at densities below 4n0. Even though qualitatively hyperons and protons exhibit the same beam energy dependence of the flow, the quantitative results are different. In this context it is suggested that the hyperon measurements can be used to study the density dependence of the hyperon interaction in high density QCD matter.
Experiments on Vibrational Energy Transfer (VET) in proteins contribute to our understanding of fundamental biological processes such as allostery, dissipation of excess energy, and possibly enzymatic catalysis. While these processes have been studied for a long time, many questions remain unanswered. The aim of this work was to expand the application of existing spectroscopic techniques to investigate VET, seeking tailored solutions for the diversity of proteins and amino acid environments. Additionally, new target proteins were to be established to broaden the spectrum of VET experiments towards the role of VET and low-frequency protein modes (LFMs).
To test their suitability as VET sensors, the non-canonical amino acids (ncAAs) Azidoalanine (N3Ala), azido-L-Homoalanine (Aha), p-azido-Phenylalanine (N3Phe), p-cyano-Phenylalanine (CNPhe), and 4-cyano-Tryptophan (CNTrp) were coupled to the VET donor β-(1-azulenyl)-L-Alanine (AzAla) in dipeptides. Their spectral properties were compared using FTIR and VET spectra in H2O, dimethyl sulfoxide, and tetrahydrofuran.
The solvent strongly influences the measured VET signals, which can be explained by the direct interaction of the solvent with the dipeptides. Additionally, the peak time within the subgroups of azide and nitrile sensors increased with the size of the side chain, indicating the dependence between peak time and the distance between VET donor and sensor. When incorporated into a protein, solvent interactions are less dominant. Therefore, Aha, N3Phe, and CNPhe were additionally incorporated at two different positions in the PDZ protein domain and investigated. Due to Fermi resonances, signals from azide sensors are challenging to predict, unlike those of the nitrile sensors.
Overall, the experiments showed that nitrile groups can serve well as VET sensors, as their lower extinction coefficient is compensated for by a narrower bandwidth. This expands the number of potential target proteins, and sensor incorporation can be less disruptive at various protein locations.
Since the VET donor AzAla can inject the energy of a photon into a protein as vibrational energy at a specific location, it can also be used for the targeted excitation of LFMs. If these modes are involved in an enzymatic reaction, a direct influence on activity is expected. This hypothesis has long existed but has not been definitively verified. Some studies have found evidence for the involvement of LFMs in formate dehydrogenase (FDH) catalysis. Therefore, FDH was chosen for the investigation of LFMs in enzymes. This specific system additionally allows the use of a natural VET sensor: it forms a stable complex with NAD+ and N3-, an excellent IR marker. Thus, it provided the opportunity to test low-molecular-weight non-covalent ligands as VET sensors.
After ensuring sufficient AzAla supply through the internal establishment of an enzymatic synthesis, AzAla could be incorporated at various positions in FDH. Despite spectral overlap between free and bound N3-, the latter could be identified by its narrower FWHM. For some variants, no binding could be observed. Circular dichroism spectra showed that these variants structurally deviate slightly from other variants and the wild type (WT). VET could be observed over 22 Å from two regions of the protein to the N3- bound in the active center, at protein concentrations of below 2 mM. Unbound N3- did not generate signals, allowing it to be added in excess ensuring the saturation of the protein in VET experiments.
The activity of FDH WT and four AzAla mutants was investigated under substrate saturation without and with AzAla excitation. In these experiments, a slight reduction in activity under illumination was observed, even for the WT, who is not expected to interact with the excitation light. So far, a difference in sample temperature cannot be excluded as the cause for this decline.
The presented experiments with FDH illustrate the potential of low-molecular-weight ligands as VET sensors, with N3- being particularly attractive due to its simple structure (preventing Fermi resonances) and its high extinction coefficient. Its use can add many metalloproteins as potential targets for VET experiments and allows investigation without a VET sensor ncAA. Additionally, initial experiments were conducted to measure light-dependent FDH activity. By specifically exciting protein LFMs, this project could contribute in the future to answering longstanding questions about the extraordinary catalytic efficiency of enzymes.
The production of π±, K±, and (p¯¯¯)p is measured in pp collisions at s√=13 TeV in different topological regions. Particle transverse momentum (pT) spectra are measured in the ``toward'', ``transverse'', and ``away'' angular regions defined with respect to the direction of the leading particle in the event. While the toward and away regions contain the fragmentation products of the near-side and away-side jets, respectively, the transverse region is dominated by particles from the Underlying Event (UE). The relative transverse activity classifier, RT=NT/⟨NT⟩, is used to group events according to their UE activity, where NT is the measured charged-particle multiplicity per event in the transverse region and ⟨NT⟩ is the mean value over all the analysed events. The first measurements of identified particle pT spectra as a function of RT in the three topological regions are reported. The yield of high transverse momentum particles relative to the RT-integrated measurement decreases with increasing RT in both the toward and away regions, indicating that the softer UE dominates particle production as RT increases and validating that RT can be used to control the magnitude of the UE. Conversely, the spectral shapes in the transverse region harden significantly with increasing RT. This hardening follows a mass ordering, being more significant for heavier particles. The pT-differential particle ratios (p+p¯¯¯)/(π++π−) and (K++K−)/(π++π−) in the low UE limit (RT→0) approach expectations from Monte Carlo generators such as PYTHIA 8 with Monash 2013 tune and EPOS LHC, where the jet-fragmentation models have been tuned to reproduce e+e− results.
The production of π±, K±, and (p¯¯¯)p is measured in pp collisions at s√=13 TeV in different topological regions. Particle transverse momentum (pT) spectra are measured in the ``toward'', ``transverse'', and ``away'' angular regions defined with respect to the direction of the leading particle in the event. While the toward and away regions contain the fragmentation products of the near-side and away-side jets, respectively, the transverse region is dominated by particles from the Underlying Event (UE). The relative transverse activity classifier, RT=NT/⟨NT⟩, is used to group events according to their UE activity, where NT is the measured charged-particle multiplicity per event in the transverse region and ⟨NT⟩ is the mean value over all the analysed events. The first measurements of identified particle pT spectra as a function of RT in the three topological regions are reported. The yield of high transverse momentum particles relative to the RT-integrated measurement decreases with increasing RT in both the toward and away regions, indicating that the softer UE dominates particle production as RT increases and validating that RT can be used to control the magnitude of the UE. Conversely, the spectral shapes in the transverse region harden significantly with increasing RT. This hardening follows a mass ordering, being more significant for heavier particles. The pT-differential particle ratios (p+p¯¯¯)/(π++π−) and (K++K−)/(π++π−) in the low UE limit (RT→0) approach expectations from Monte Carlo generators such as PYTHIA 8 with Monash 2013 tune and EPOS LHC, where the jet-fragmentation models have been tuned to reproduce e+e− results.
The production of π±, K±, and (p¯¯¯)p is measured in pp collisions at s√=13 TeV in different topological regions. Particle transverse momentum (pT) spectra are measured in the ``toward'', ``transverse'', and ``away'' angular regions defined with respect to the direction of the leading particle in the event. While the toward and away regions contain the fragmentation products of the near-side and away-side jets, respectively, the transverse region is dominated by particles from the Underlying Event (UE). The relative transverse activity classifier, RT=NT/⟨NT⟩, is used to group events according to their UE activity, where NT is the measured charged-particle multiplicity per event in the transverse region and ⟨NT⟩ is the mean value over all the analysed events. The first measurements of identified particle pT spectra as a function of RT in the three topological regions are reported. The yield of high transverse momentum particles relative to the RT-integrated measurement decreases with increasing RT in both the toward and away regions, indicating that the softer UE dominates particle production as RT increases and validating that RT can be used to control the magnitude of the UE. Conversely, the spectral shapes in the transverse region harden significantly with increasing RT. This hardening follows a mass ordering, being more significant for heavier particles. The pT-differential particle ratios (p+p¯¯¯)/(π++π−) and (K++K−)/(π++π−) in the low UE limit (RT→0) approach expectations from Monte Carlo generators such as PYTHIA 8 with Monash 2013 tune and EPOS LHC, where the jet-fragmentation models have been tuned to reproduce e+e− results.
The production of π±, K±, and (p¯¯¯)p is measured in pp collisions at s√=13 TeV in different topological regions. Particle transverse momentum (pT) spectra are measured in the ``toward'', ``transverse'', and ``away'' angular regions defined with respect to the direction of the leading particle in the event. While the toward and away regions contain the fragmentation products of the near-side and away-side jets, respectively, the transverse region is dominated by particles from the Underlying Event (UE). The relative transverse activity classifier, RT=NT/⟨NT⟩, is used to group events according to their UE activity, where NT is the measured charged-particle multiplicity per event in the transverse region and ⟨NT⟩ is the mean value over all the analysed events. The first measurements of identified particle pT spectra as a function of RT in the three topological regions are reported. The yield of high transverse momentum particles relative to the RT-integrated measurement decreases with increasing RT in both the toward and away regions, indicating that the softer UE dominates particle production as RT increases and validating that RT can be used to control the magnitude of the UE. Conversely, the spectral shapes in the transverse region harden significantly with increasing RT. This hardening follows a mass ordering, being more significant for heavier particles. The pT-differential particle ratios (p+p¯¯¯)/(π++π−) and (K++K−)/(π++π−) in the low UE limit (RT→0) approach expectations from Monte Carlo generators such as PYTHIA 8 with Monash 2013 tune and EPOS LHC, where the jet-fragmentation models have been tuned to reproduce e+e− results.
This work focuses on the investigation of K+, K- and ϕ-meson production in Ag(1.58 A GeV)+Ag collisions. The energetically cheapest channel for direct K+ production in binary NN-collisions NN→NΛK+ lies at exactly this energy. For the remaining K- and ϕ-mesons, an excess energy of 0.31 GeV and 0.34 GeV in the centre of mass system has to be provided by the system. This makes these particles an excellent probe for effects inside the medium.
K+ and K- mesons can be reconstructed directly as they possess a cτ of approximately 3.7 m. Using the approximately 3 billion recorded Ag(1.58 A GeV)+Ag 0-30% most central collision events, all reconstructed K+ and K- within the detector acceptance are investigated for their kinematic properties and their particle production rates compared to a selection of existing models.
Production of K0S, Λ (Λ), Ξ±, and Ω± in jets and in the underlying event in pp and p–Pb collisions
(2023)
The production of strange hadrons (K0S, Λ, Ξ±, and Ω±), baryon-to-meson ratios (Λ/K0S, Ξ/K0S, and Ω/K0S), and baryon-to-baryon ratios (Ξ/Λ, Ω/Λ, and Ω/Ξ) associated with jets and the underlying event were measured as a function of transverse momentum (pT) in pp collisions at s√=13 TeV and p-Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector at the LHC. The inclusive production of the same particle species and the corresponding ratios are also reported. The production of multi-strange hadrons, Ξ± and Ω±, and their associated particle ratios in jets and in the underlying event are measured for the first time. In both pp and p-Pb collisions, the baryon-to-meson and baryon-to-baryon yield ratios measured in jets differ from the inclusive particle production for low and intermediate hadron pT (0.6−6 GeV/c). Ratios measured in the underlying event are in turn similar to those measured for inclusive particle production. In pp collisions, the particle production in jets is compared with PYTHIA 8 predictions with three colour-reconnection implementation modes. None of them fully reproduces the data in the measured hadron pT region. The maximum deviation is observed for Ξ± and Ω±, which reaches a factor of about six. In p-Pb collisions, there is no significant event-multiplicity dependence for particle production in jets, in contrast to what is observed in the underlying event. The presented measurements provide novel constraints on hadronisation and its Monte Carlo description. In particular, they demonstrate that the fragmentation of jets alone is insufficient to describe the strange and multi-strange particle production in hadronic collisions at LHC energies.
Production of K0S, Λ (Λ), Ξ± and Ω± in jets and in the underlying event in pp and p–Pb collisions
(2023)
The production of strange hadrons (K0S, Λ, Ξ±, and Ω±), baryon-to-meson ratios (Λ/K0S, Ξ/K0S, and Ω/K0S), and baryon-to-baryon ratios (Ξ/Λ, Ω/Λ, and Ω/Ξ) associated with jets and the underlying event were measured as a function of transverse momentum (pT) in pp collisions at s√=13 TeV and p-Pb collisions at sNN−−−√=5.02 TeV with the ALICE detector at the LHC. The inclusive production of the same particle species and the corresponding ratios are also reported. The production of multi-strange hadrons, Ξ± and Ω±, and their associated particle ratios in jets and in the underlying event are measured for the first time. In both pp and p-Pb collisions, the baryon-to-meson and baryon-to-baryon yield ratios measured in jets differ from the inclusive particle production for low and intermediate hadron pT (0.6−6 GeV/c). Ratios measured in the underlying event are in turn similar to those measured for inclusive particle production. In pp collisions, the particle production in jets is compared with PYTHIA 8 predictions with three colour-reconnection implementation modes. None of them fully reproduces the data in the measured hadron pT region. The maximum deviation is observed for Ξ± and Ω±, which reaches a factor of about six. In p-Pb collisions, there is no significant event-multiplicity dependence for particle production in jets, in contrast to what is observed in the underlying event. The presented measurements provide novel constraints on hadronisation and its Monte Carlo description. In particular, they demonstrate that the fragmentation of jets alone is insufficient to describe the strange and multi-strange particle production in hadronic collisions at LHC energies.
The Chiral Magnetic Wave (CMW) phenomenon is essential to provide insights into the strong interaction in QCD, the properties of the quark-gluon plasma, and the topological characteristics of the early universe, offering a deeper understanding of fundamental physics in high-energy collisions. Measurements of the charge-dependent anisotropic flow coefficients are studied in Pb-Pb collisions at center-of-mass energy per nucleon-nucleon collision sNN−−−√= 5.02 TeV to probe the CMW. In particular, the slope of the normalized difference in elliptic (v2) and triangular (v3) flow coefficients of positively and negatively charged particles as a function of their event-wise normalized number difference, is reported for inclusive and identified particles. The slope rNorm3 is found to be larger than zero and to have a magnitude similar to rNorm2, thus pointing to a large background contribution for these measurements. Furthermore, rNorm2 can be described by a blast wave model calculation that incorporates local charge conservation. In addition, using the event shape engineering technique yields a fraction of CMW (fCMW) contribution to this measurement which is compatible with zero. This measurement provides the very first upper limit for fCMW, and in the 10-60% centrality interval it is found to be 26% (38%) at 95% (99.7%) confidence level.
The Chiral Magnetic Wave (CMW) phenomenon is essential to provide insights into the strong interaction in QCD, the properties of the quark-gluon plasma, and the topological characteristics of the early universe, offering a deeper understanding of fundamental physics in high-energy collisions. Measurements of the charge-dependent anisotropic flow coefficients are studied in Pb-Pb collisions at center-of-mass energy per nucleon-nucleon collision sNN−−−√= 5.02 TeV to probe the CMW. In particular, the slope of the normalized difference in elliptic (v2) and triangular (v3) flow coefficients of positively and negatively charged particles as a function of their event-wise normalized number difference, is reported for inclusive and identified particles. The slope rNorm3 is found to be larger than zero and to have a magnitude similar to rNorm2, thus pointing to a large background contribution for these measurements. Furthermore, rNorm2 can be described by a blast wave model calculation that incorporates local charge conservation. In addition, using the event shape engineering technique yields a fraction of CMW (fCMW) contribution to this measurement which is compatible with zero. This measurement provides the very first upper limit for fCMW, and in the 10-60% centrality interval it is found to be 26% (38%) at 95% (99.7%) confidence level.
Presolar grain isotopic ratios as constraints to nuclear physics inputs for s-process calculations
(2023)
The isotopic abundances in presolar SiC grains of AGB origin provide important and precise constraints to those star nucleosynthesis models. By comparing the values of the s-element abundances resulting from calculations with the ones measured in these dust grains, it turns out that new measurements of weak-interaction rates in ionized plasmas, as well as of neutron-capture cross sections, are needed, especially in the region near the neutron magic numbers 50 and 82.
Precise tune determination and split beam emittance reconstruction at the CERN PS synchrotron
(2023)
In accelerator physics, the need to improve the performance and better control the operating point of an accelerator has become, year after year, an increasingly important need in order to achieve higher energies and brightness, as well as point-like particle beams. If this involves increasingly advanced technological developments (in terms, for example, of materials for more intense superconducting magnets), it can not take place in the absence of targeted studies of linear and non-linear beam dynamics. In the context of this Ph.D. thesis in physics, linear and non-linear dynamics of charged particles in circular accelerators is the topic that will be discussed and treated in detail. In particular, the presentation and discussion of the results will be divided in two main topics: the need to know the physical properties of a proton beam; and the development of innovative methods to determine and study the accelerator’s working point. With regard to the first topic, an innovative procedure will be presented to determine the transverse size of the PS beam in the beam extraction phase. Among the different ways the extraction occurs at the PS, the analysed one is based on the transverse splitting of the beam by means of non-linear fields. Thus, the knowledge of the transverse beam size is not trivial since resonant linear and non-linear beam structures (namely, core and islands) arise and, for each of them, the beam size has to be quantified. This parameter is crucial for two main reasons: the accelerator that will receive the beam exiting the upstream accelerator may have restrictions (physical or magnetic) that involve a partial or total loss of the incoming beam; and any experiments located downstream of the considered accelerator may need a beam with a transversal size as constant as possible; consequently, its monitoring and control are essential. The second topic concerns the accurate determination of the working point of an accelerator, defined as the number of transverse oscillations the particle beam travels per unit of accelerator circumference, both horizontally and vertically. This quantity is called horizontal and vertical tune, respectively. Their knowledge is also crucial to understand whether the beam will be stable or unstable. In fact, not all tune values are acceptable, as there are particular values that bring the beam into resonance. In this configuration, the amplitude of the transverse oscillations of the particles increases in an uncontrolled manner and leads to the loss of all or part of the beam. Note that, in particular operating conditions, the resonant conditions are sought and desired to model, in a suitable way, the transversal shape of the beam, such as the above mentioned PS extraction scheme. It is even clearer how much the determination of the machine working point is essential to determine the operating conditions of an accelerator. In this context, several methods (also taken from the field of applied mathematics) to calculate the tune will be demonstrated and tested numerically on different types of synthetic signals. At the end of this description, the use of experimental data will allow to obtain the benchmark of a new method for the direct calculation of some characteristic quantities of non-linear beam dynamics (namely, the amplitude detuning, i.e. the variation of tune as a function of intensity of the perturbation provided to the beam.
Precise intensity monitoring at CRYRING@ESR: on designing a Cryogenic Current Comparator for FAIR
(2023)
In the field of today’s beam intensity diagnostic there is a significant gap in the non-interceptive, calibrated measurement of the absolute intensity of continuous (unbunched) dc beams with current amplitudes below 1 μA. At the Facility for Antiproton and Ion Research (FAIR) low-intensity DC beams will occur during slow extraction from the synchrotrons as well as for coasting beams of highly-charged or exotic nuclei in the storage rings. The lack of adequate beam instrumentation limits the experimental program as well as the accuracy of experimental results.
The Cryogenic Current Comparator (CCC) can close the diagnostic gap with a high-precision dc current reading independent of ion-species and of beam parameters. However, the established detector design based on a core with high magnetic permeability and on a radial shield geometry has well-known weaknesses concerning magnetic shielding efficiency and intrinsic current noise. To eliminate these weaknesses, a novel coreless CCC with a co-axial shield was constructed and combined with a high-performance SQUID contributed by the Leibniz-Institute of Photonic Technology (Leibniz-IPHT Jena). The new axial CCC model was compared to a radial CCC with the established design provided by the Friedrich-Schiller-University Jena. According to numerical simulations prepared at TU Darmstadt and test measurements of the detectors in the laboratory, the new design offered a significant improvement of the shielding factor – from 75dB to 207dB at the required dimensions – and eliminated all noise contributions from the core material, promising an improved current resolution. Although the lower inductance of the pickup coil reduced the coupling to the beam significantly, the noise properties of the new CCC type were comparable to the classical version with a high-permeability core. However, the expected decrease of the low-frequency noise and thus an increase of the current resolution could not be observed at this stage of development.
Consequently, the classical CCC based on the radial shielding and high-permeability core had to be installed in CRYRING@ESR to provide best possible intensity measurements for the upcoming experimental campaign. In CRYRING the CCC was operated with beam currents between 1nA and 20μA and with different ion species (H, Ne, O, Pb, U). It was shown that the CCC provides a noise-limited current resolution of better than 3.2 nArms at a bandwidth of 200 kHz as well as a noise level below 40 pA/√Hz above 1 kHz. During the operation, the main noise sources of the accelerator environment had to be identified and suitable mitigation strategies were developed. Temperature and pressure fluctuations were suppressed with a newly-designed cryogenic support system based on a 70 l helium bath cryostat, developed and built in collaboration with the Institut für Luft- und Kältetechnik Dresden, in combination with a helium re-liquefier. The cryogenic operating time was restricted to around 7 days, which must be expanded significantly in the future. Digital filters were developed to remove the perturbations of the helium liquefier and of the neighboring dipole magnets. Given the promising results the CCC system can be considered as a prototype for future CCCs at FAIR.
Post-merger gravitational-wave signal from neutron-star binaries: a new look at an old problem
(2023)
The spectral properties of the post-merger gravitational-wave signal from a binary of neutron stars encodes a variety of information about the features of the system and of the equation of state describing matter around and above nuclear saturation density. Characterizing the properties of such a signal is an “old” problem, which first emerged when a number of frequencies were shown to be related to the properties of the binary through “quasiuniversal” relations. Here we take a new look at this old problem by computing the properties of the signal in terms of the Weyl scalar ψ4. In this way, and using a database of more than 100 simulations, we provide the first evidence for a new instantaneous frequency, y f0 4, associated with the instant of quasi-time-symmetry in the dynamics, and which also follows a quasi-universal relation. We also derive a new quasi-universal relation for the merger frequency f h mer, which provides a description of the data that is 4 times more accurate than previous expressions while requiring fewer fitting coefficients. Finally, consistent with the findings of numerous studies before ours, and using an enlarged ensemble of binary systems, we point out that the ℓ = 2, m = 1 gravitational-wave mode could become comparable with the traditional ℓ = 2, m = 2 mode on sufficiently long timescales, with strain amplitudes in a ratio |h21|/|h22| ∼ 0.1–1 under generic orientations of the binary, which could be measured by present detectors for signals with a large signal-to-noise ratio or by third-generation detectors for generic signals should no collapse occur.
Post-merger gravitational-wave signal from neutron-star binaries: a new look at an old problem
(2023)
The spectral properties of the post-merger gravitational-wave signal from a binary of neutron stars encodes a variety of information about the features of the system and of the equation of state describing matter around and above nuclear saturation density. Characterising the properties of such a signal is an “old” problem, which first emerged when a number of frequencies were shown to be related to the properties of the binary through “quasi-universal” relations. Here we take a new look at this old problem by computing the properties of the signal in terms of the Weyl scalar ψ4. In this way, and using a database of more than 100 simulations, we provide the first evidence for a new instantaneous frequency, f ψ4 0, associated with the instant of quasi timesymmetry in the postmerger dynamics, and which also follows a quasi-universal relation. We also derive a new quasi-universal relation for the merger frequency f h mer, which provides a description of the data that is four times more accurate than previous expressions while requiring fewer fitting coefficients. Finally, consistently with the findings of numerous studies before ours, and using an enlarged ensamble of binary systems we point out that the ℓ = 2, m = 1 gravitational-wave mode could become comparable with the traditional ℓ = 2, m = 2 mode on sufficiently long timescales, with strain amplitudes in a ratio |h 21|/|h 22| ∼ 0.1 − 1 under generic orientations of the binary, which could be measured by present detectors for signals with large signal-to-noise ratio or by third-generation detectors for generic signals should no collapse occur.
In QCD at large enough isospin chemical potential Bose-Einstein Condensation (BEC) takes place, separated from the normal phase by a phase transition. From previous studies the location of the BEC line at the physical point is known. In the chiral limit the condensation happens already at infinitesimally small isospin chemical potential for zero temperature according to chiral perturbation theory. The thermal chiral transition at zero density might then be affected, depending on the shape of the BEC boundary, by its proximity. As a first step towards the chiral limit, we perform simulations of 2+1 flavors QCD at half the physical quark masses. The position of the BEC transition is then extracted and compared with the results at physical masses.
An excess of J/ψ yield at very low transverse momentum (pT<0.3 GeV/c), originating from coherent photoproduction, is observed in peripheral and semicentral hadronic Pb–Pb collisions at a center-of-mass energy per nucleon pair of sNN=5.02 TeV. The measurement is performed with the ALICE detector via the dimuon decay channel at forward rapidity (2.5<y<4). The nuclear modification factor at very low pT and the coherent photoproduction cross section are measured as a function of centrality down to the 10% most central collisions. These results extend the previous study at sNN=2.76 TeV, confirming the clear excess over hadronic production in the pT range 0−0.3 GeV/c and the centrality range 70–90%, and establishing an excess with a significance greater than 5σ also in the 50–70% and 30–50% centrality ranges. The results are compared with earlier measurements at sNN=2.76 TeV and with different theoretical predictions aiming at describing how coherent photoproduction occurs in hadronic interactions with nuclear overlap.
An excess of J/ψ yield at very low transverse momentum (pT<0.3 GeV/c), originating from coherent photoproduction, is observed in peripheral and semicentral hadronic Pb−Pb collisions at a center-of-mass energy per nucleon pair of sNN−−−√=5.02 TeV. The measurement is performed with the ALICE detector via the dimuon decay channel at forward rapidity (2.5<y<4). The nuclear modification factor at very low pT and the coherent photoproduction cross section are measured as a function of centrality down to the 10% most central collisions. These results extend the previous study at sNN−−−√=2.76 TeV, confirming the clear excess over hadronic production in the pT range 0−0.3 GeV/c and the centrality range 70−90%, and establishing an excess with a significance greater than 5σ also in the 50−70% and 30−50% centrality ranges. The results are compared with earlier measurements at sNN−−−√=2.76 TeV and with different theoretical predictions aiming at describing how coherent photoproduction occurs in hadronic interactions with nuclear overlap.
K+K− pairs may be produced in photonuclear collisions, either from the decays of photoproduced ϕ(1020) mesons, or directly as non-resonant K+K− pairs. Measurements of K+K− photoproduction probe the couplings between the ϕ(1020) and charged kaons with photons and nuclear targets. We present the first measurement of coherent photoproduction of K+K− pairs on lead ions in ultra-peripheral collisions using the ALICE detector, including the first investigation of direct K+K− production. There is significant K+K− production at low transverse momentum, consistent with coherent photoproduction on lead targets. In the mass range 1.1<MKK<1.4 GeV/c2 above the ϕ(1020) resonance, for rapidity |yKK|<0.8 and pT,KK<0.1 GeV/c, the measured coherent photoproduction cross section is dσ/dy = 3.37 ± 0.61 (stat.) ± 0.15 (syst.) mb. The centre-of-mass energy per nucleon of the photon-nucleus (Pb) system WγPb,n ranges from 33 to 188 GeV, far higher than previous measurements on heavy-nucleus targets. The cross section is larger than expected for ϕ(1020) photoproduction alone. The mass spectrum is fit to a cocktail consisting of ϕ(1020) decays, direct K+K− photoproduction, and interference between the two. The confidence regions for the amplitude and relative phase angle for direct K+K− photoproduction are presented.
Phase transitions in a non-perturbative regime can be studied by ab initio Lattice Field Theory methods. The status and future research directions for LFT investigations of Quantum Chromo-Dynamics under extreme conditions are reviewed, including properties of hadrons and of the hypothesized QCD axion as inferred from QCD topology in different phases. We discuss phase transitions in strong interactions in an extended parameter space, and the possibility of model building for Dark Matter and Electro-Weak Symmetry Breaking. Methodological challenges are addressed as well, including new developments in Artificial Intelligence geared towards the identification of different phases and transitions.
In the framework of the LHC Injectors Upgrade Project (LIU), the CERN Proton Synchrotron Booster (PSB) went through major upgrades resulting in new effects to study, challenges to overcome and new parameter regimes to explore. To assess the achievable beam brightness limit of the machine, a series of experimental and computational studies in the transverse planes were performed. In particular, the new injection scheme induces optics perturbations that are strongly enhanced near the half-integer resonance. In this thesis, methods for dynamically measuring and correcting these perturbations and their impact on the beam performance will be presented. Additionally, the quality of the transverse beam distributions and strategies for improvement will be addressed. Finally, the space charge effects when dynamically crossing the half-integer resonance will be characterized. The results of these studies and their broader significance beyond the PSB will be discussed.
A synchrotron is a particular type of cyclic particle accelerator and the first accelerator concept to enable the construction of large-scale facilities [10], such as the largest particle accelerator in the world, the 27-kilometre-circumference Large Hadron Collider (LHC) by CERN near Geneva, Switzerland, the European Synchrotron Radiation Facility (ESRF) in Grenoble, France for the synchrotron radiation, the superconducting, heavy ion synchrotron SIS100 under construction for the FAIR facility at GSI, Darmstadt, Germany and so on. Unlike a cyclotron, which can accelerate particles starting at low kinetic energy, a synchrotron needs a pre-acceleration facility to accelerate particles to an appropriate initial value before synchrotron injection. A pre-acceleration can be realized by a chain of other accelerator structures like a linac, a microtron in case of electrons, for example, Proton and ion injectors Linac 4 and Linac 3 for the LHC, UNLAC as the injector for the SIS18 in GSI and in future the SIS18 as injector for the SIS100. The linac is a commonly used injector for the ion synchrotron and consists of some key components. The three main parts of a linac are: An ion source creating the particles, a buncher system or an RFQ followed by the main drift tube accelerator DTL. In order to meet the energy and the beam current requirement of a synchrotron injector linac, its cost is a remarkable percentage of the total facility costs.
However, the normal conducting linac operation at cryogenic temperatures can be a promising solution in improving the efficiency and reducing the costs of a linac. Synchrotron injectors operate at very low duty factor with beam pulse lengths in 1 micros to 100 micros range, as most of the time is needed to perform the synchrotron cycle. Superconducting linacs are not convenient, as they cannot efficiently operate at low duty factor and high beam currents.
The cryogenic operation of ion linacs is discussed and investigated at IAP in Frankfurt since around 2012 [1, 37]. The motivation was to develop very compact synchrotron injectors at reduced overall linac costs per MV of acceleration voltage. As the needed beam currents for new facilities are increasing as well, the new technology will also allow an efficient realization of higher injector linac energies, which is needed in that case. Operating normal conducting structures at cryogenic temperature exploits the significantly higher conductivity of copper at temperatures of liquid nitrogen and below. On the other hand, the anomalous skin effect reduces the gain in shunt impedance quite a bit[25, 31, 9]. Some intense studies and experiments were performed recently, which are encouraging with respect to increased field levels at linac operation temperatures between 30 K and 70 K [17, 24, 4, 23, 5, 8]. While these studies are motivated by applications in electron acceleration at GHz-frequencies, the aim of this paper is to find applications in the 100 to 700 MHz range, typical for proton and ion acceleration. At these frequencies, a higher impact in saving RF power is expected due to the larger skin depth, which is proportional to the frequency to the power of negative half with respect to the normal skin effect. On the other hand, it is assumed that the improvement in maximum surface field levels will be similar to what was demonstrated already for electron accelerator cavities. This should allow to find a good compromise between reduced RF power needs for achieving a given accelerator voltage and a reduced total linac length to save building costs.
A very important point is the temperature stability of the cavity surface during the RF pulse. This is of increasing importance the lower the operating temperature is chosen: the temperature dependence of the electric conductivity in copper gets rather strong below 80 K, as long as the RRR - value of the copper is adequate. It is very clear, that this technology is suited for low duty cycle operated cavities only - with RF pulse lengths below one millisecond. At longer pulses the cavity surface will be heated within the pulse to temperatures, where the conductivity advantage is reduced substantially. These conditions fit very well to synchrotron injectors or to pulsed beam power applications.
H – Mode structures of the IH – and of the CH – type are well-known to have rather small cavity diameters at a given operating frequency. Moreover, they can achieve effective acceleration voltage gains above 10 MV/m even at low beam energies, and already at room temperature operation[29]. With the new techniques of 3d – printing of stainless steel and copper components one can reduce cavity sizes even further – making the realization of complex cooling channels much easier.
Another topic are copper components in superconducting cavities – like power couplers. It is of great importance to know exactly the thermal losses at these surfaces, which can’t be cooled efficiently in an easy way.
The free energy of TAP-solutions for the SK-model of mean field spin glasses can be expressed as a nonlinear functional of local terms: we exploit this feature in order to contrive abstract REM-like models which we then solve by a classical large deviations treatment. This allows to identify the origin of the physically unsettling quadratic (in the inverse of temperature) correction to the Parisi free energy for the SK-model, and formalizes the true cavity dynamics which acts on TAP-space, i.e. on the space of TAP-solutions. From a non-spin glass point of view, this work is the first in a series of refinements which addresses the stability of hierarchical structures in models of evolving populations.
A considerable effort has been dedicated recently to the construction of generic equations of state (EOSs) for matter in neutron stars. The advantage of these approaches is that they can provide model-independent information on the interior structure and global properties of neutron stars. Making use of more than 106 generic EOSs, we asses the validity of quasi-universal relations of neutron star properties for a broad range of rotation rates, from slow-rotation up to the mass-shedding limit. In this way, we are able to determine with unprecedented accuracy the quasi-universal maximum-mass ratio between rotating and nonrotating stars and reveal the existence of a new relation for the surface oblateness, i.e., the ratio between the polar and equatorial proper radii. We discuss the impact that our findings have on the imminent detection of new binary neutron-star mergers and how they can be used to set new and more stringent limits on the maximum mass of nonrotating neutron stars, as well as to improve the modelling of the X-ray emission from the surface of rotating stars.