Refine
Year of publication
Document Type
- Doctoral Thesis (29)
- Master's Thesis (3)
Has Fulltext
- yes (32)
Is part of the Bibliography
- no (32)
Keywords
- HADES (4)
- CBM (2)
- CBM Experiment (2)
- Control System (2)
- Dileptonen (2)
- EPICS (2)
- Schwerionenphysik (2)
- Spurselektion (2)
- dileptons (2)
- heavy ion physics (2)
Institute
- Physik (32)
Starting from the first observation of the halo phenomenon 20 years ago, more and more neutron-rich light nuclei were observed. The study of unstable nuclear systems beyond the dripline is a relatively new branch of nuclear physics. In the present work, the results of an experiment at GSI (Darmstadt) with relativistic beams of the halo nuclei 8He, 11Li and 14Be with energies of 240, 280 and 305 MeV/nucleon, respectively, impinging on a liquid hydrogen target are discussed. Neutron/proton knockout reactions lead to the formation of unbound systems, followed by their immediate decay. The experimental setup, consisting of the neutron detector LAND, the dipole spectrometer ALADIN and different types of tracking detectors, allows the reconstruction of the momentum vectors of all reaction products measured in coincidence. The properties of unbound nuclei are investigated by reconstructing the relative-energy spectra as well as by studying the angular correlations between the reaction products. The observed systems are 9He, 10He, 10Li, 12Li and 13Li. The isotopes 12Li and 13Li are observed for the first time. They are produced in the 1H(14Be, 2pn)12Li and 1H(14Be, 2p)13Li knockout reactions. The obtained relative-energy spectrum of 12Li is described as a single virtual s-state with a scattering length of as = -22;13.7(1.6) fm. The spectrum of 13Li is interpreted as a resonance at an energy of Er = 1.47(13) MeV and a width of Gamma ~ 2 MeV superimposed on a broad correlated background distribution. The isotope 10Li is observed after one-neutron knockout from the halo nucleus 11Li. The obtained relative-energy spectrum is described by a low-lying virtual s-state with a scattering length as = -22.4(4.8) fm and a p-wave resonance with Er = 0.566(14) MeV and Gamma = 0.548(30) MeV, in agreement with previous experiments. The observation of the nucleus 8He in coincidence with one or two neutrons, as a result of proton knockout from 11Li, allows to reconstruct the relative-energy spectra for the heavy helium isotopes, 9He and 10He. The low-energy part of the 9He spectrum is described by a virtual s-state with a scattering length as = -3.16(78) fm. In addition, two resonance states with l 6= 0 at energies of 1.33(8) and 2.4 MeV are observed. For the 10He spectrum, two interpretations are possible. It can be interpreted as a superposition of a narrow resonance at 1.42(10) MeV and a broad correlated background distribution. Alternatively, the spectrum is being well described by two resonances at energies of 1.54(11) and 3.99(26) MeV. Additionally, three-body energy and angular correlations in 10He and 13Li nuclei at the region of the ground state (0 < ECnn < 3 MeV) are studied, providing information about structure of these unbound nuclear systems.
The Compressed Baryonic Matter (CBM) is one of the core experiments at the future Facility for Anti-proton and Ion Research (FAIR), Darmstadt, Germany. Its goal is to investigate nuclear matter characteristics at high net-baryon densities and moderate temperatures. The Silicon Tracking System (STS) is a central detector system of CBM.
It is placed inside a 1Tm magnet and operated at a temperature of about −10 °C to keep radiation-induced bulk current in the 300μm double-sided microstrip silicon sensors low. The design of the STS aims to minimize the material budget in the detector acceptance (2.5° < θ < 25°). In order to do so, the readout electronics is placed outside the active area, and the analog signals are transported via ultra-thin micro-cables. The STS comprises eight tracking stations with 876 modules. Each module is assembled on a carbon fiber ladder, which is subsequently mounted in the C-shaped aluminum frame.
The scope of the thesis focused on developing a modular control system framework that can be implemented for different sizes of experimental setups. The developed framework was used for setups that required a remote operation, like the irradiation of the powering modules for the front-end electronics (FEE), but also in laboratory-based setups where the automation and archiving were needed (thermal cycling of the STS electronics).
The low voltage powering modules will be placed in the vicinity of the experiment, therefore they will experience a total dose of up to 40mGy over the 10 years of STS lifetime.
To estimate the effects of the radiation on the low-voltage module performance, a dedicated irradiation campaign took place. It aimed at estimating the rate of radiation induced soft errors, that lead to the switch off of the FEE.
Regular power cycles of multiple front-end boards (FEBs) pose a risk to the experiment operation. Firstly, such behavior could negatively influence the physics performance but also have deteriorating effects on the hardware. It was further assessed what are the limitations of the FEBs with respect to the thermal cycling and the mechanical stress. The results served as an indication of possible failure modes of the FEB at the end of STS lifetime. Failure modes after repeated cycles and potential reasons were determined (e.g., Coefficient of Thermal Expansion (CTE) difference between the materials).
Due to the conditions inside the STS efficient temperature and humidity monitoring and control are required to avoid icing or water condensation on the electronics or silicon sensors. The most important properties of a suitable sensor candidate are resilience to the magnetic field, ionizing radiation tolerance, and fairly small size.
A general strategy for ambient parameters monitoring inside the STS was developed, and potential sensor candidates were chosen. To characterize the chosen relative humidity sensors the developed control framework was introduced. A sampling system with a ceramic sensor and Fiber Optic Sensors (FOS) were identified as reliable solutions for the distributed sensing system. Additionally, the industrial capacitive sensors will be used as a reference during the commissioning.
Two different designs of FOS were tested: a hygrometer and 5 sensors multiplexed in an array. The FOS hygrometer turned out to be a more reliable solution. One of the possible reasons for a worse performance is a relatively low distance between the subsequent sensors (15 cm) and a thicker coating. The results obtained from the time response study pointed out that the thinner coating of about 15μm should be a good compromise between the humidity sensitivity and the time response.
The implementation of the containerized-based control system framework for the mSTS is described in detail. The deployed EPICS-based framework proved to be a reliable solution and ensured the safety of the detector for almost 1.5 years. Moreover, the data related to the performance of the detector modules were analyzed and significant progress in the quality of modules was noted. Obtained data was also used to estimate the total fluence, which was based on the leakage current changes.
The developed framework provided a unique opportunity to automate and control different experimental setups which provided crucial data for the STS. Furthermore, the work underlines the importance of such a system and outlines the next steps toward the realization of a reliable Detector Control System for STS.
Lepton pairs emerging from decays of virtual photons represent promising probes of nuclear matter under extreme conditions of temperature and density. These etreme conditions can be reached in heavy-ion collisions in various facilities around the world. Hereby the collision energy in the center-of-mass system (√SNN) varies from few GeV (SIS) to the TeV (LHC). In the energy domain of 1 - 2 GeV per nucleon (GeV/u), the HADES experiment at GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt studies dielectrons and strangeness production.
Various reactions, for example collisions of pions, protons, deuterons and heavy-ions with nuclei have been studied since its installation in the year 2001. Hereby the so called DLS Puzzle was solved experimentally, with remeasuring C+C at 1 and 2 GeV/u and by careful studies of inclusive pp and pn reactions at 1.25 GeV. With these measurements the so-called reference spectrum was established. Measurements of e+ e− production Ar+KCl showed an enhancement on the dilepton spectrum above the trivial NN back-
ground. Theory predicts a strong enhancement of medium radiation with the system size, due to large production of fast decaying baryonic resonances like ∆ and N∗ . The heaviest system measured so far was Au+Au at a kinetic beam energy of 1.23 GeV/u. The precise determination of the medium radiation depends
on a precise knowledge of the underlying hadronic cocktail composed of various sources contributing to the measured dilepton spectrum. In general the medium radiation needs to be separated from contributions coming from long-lived particles, that decay after the freeze out of the system. For a more model independent
understanding of the dilepton cocktail the production cross sections of these particles need to measured independently. In the related energy regime the main contributers are π0 and η Dalitz decays. Both mesons have a dominant decay into two real photons and have been reconstructed successfully in this channel. Since HADES has no electromagnetic calorimeter the mesons can not be identified in this decay channel directly. In this thesis the capability of HADES to detect e+ e− pairs from conversions of real photons is demonstrated.
Therefore not only the conversion probability but also the resulting efficiencies are shown. Furthermore, the reconstruction method for neutral mesons will be explained and the resulting spectra are interpreted. The measurement of neutral pions is compared to the independent measured charged pion distribution, and
extrapolated to full phase space. An integrated approach is used to determine the η yield. Both measurement are compared to the world data and to theory model claculations. Finally, the measurements will be used together with the reconstructed dilepton spectra to determine the amount and the properties of in medium radiation in the Au+Au system.
The work presented in this thesis addresses a key issue of the CBM experiment at FAIR, which aims to study charm production in heavy ion collisions at energies ranging from 10 to 40 AGeV . For the first time in this kinematical range, open charm mesons will be used as a probe of the nuclear fireball. Despite of their short decay length, which is typically in the order of few 100 µm in the laboratory frame, those mesons will be identified by reconstructing their decay vertex.
The study of the electromagnetic structure of hadrons plays an important role in understanding the nature of matter. In particular the emission of lepton pairs out of the hot and dense collision zone in heavy-ion reactions is a promising probe to investigate in-medium properties of hadrons and in general the properties of matter under such extreme conditions. The first experimental observation of an enhanced di-electron yield in the invariant-mass region 0:3 - 0:7 GeV/c2 in p+Be collisions at 4:9 GeV/u beam energy [2] was announced by the DLS collaboration [1]. Recent results of the HADES collaboration show a moderate enhancement above n Dalitz decay contributions for 12C+12C at 1 and 2 GeV/u [3, 4] confirming the DLS results. There are several theoretical explanations of this observation, most of them focusing on possible in-medium modifications of the properties of vector mesons. At low beam energies the question whether the observed excess is related to any in-medium effects remains open because of uncertainties in the description of elementary di-electron sources. In this work the di-electron production in p+p and d+p reactions at a kinetic beam energy of 1:25 GeV/u measured by the HADES spectrometer is discussed. At Ekin = 1:25 GeV/u, i.e. below the n meson production threshold in proton-proton reactions, the delta Dalitz decay is expected to be the most abundant source above the pi 0 Dalitz decay region. The observed large difference in di-electron production in p+p and d+p collisions suggests that di-electron production in the d+p system is dominated by the n+p interaction. In order to separate delta Dalitz decays and np bremsstrahlung the di-electron yield observed in p+p and n+p reactions, both measured at the same beam energy, has been compared. The main interest here is the investigation of iso-spin effects in baryonic resonance excitations and the off-shell production of vector mesons [5]. We indeed observe a large difference in di-electron production in p+p and n+p reactions. Results of these studies will be compared to recent calculations. We will also present our experimentally defined cocktail for heavy-ion data. At much higher beam energies experimental results of the CERES [6] and NA60 [7] collaborations also show an enhancement in the invariant mass region 0:3 - 0:7 GeV/c2, in principle similar to the situation in DLS. A strong excess of lepton pairs observed by recent high energy heavy-ion dilepton experiments hint to a strong influence of baryons, however no data exist at highly compressed baryonic matter, achievable in heavy-ion collisions from 8 - 45 GeV/u beam energy. These conditions would allow to study the expected restoration of chiral symmetry by measuring in-medium modifications of hadronic properties, an experimental program which is foreseen by the future CBM experiment at FAIR. The experimental challenge is to suppress the large physical background on the one hand and to provide a clean identification of electrons on the other hand. In this work, strategies to reduce the combinatorial background in electron pair measurements with the CBM detector are discussed. The main goal is to study the feasibility of effectively reducing combinatorial background with the currently foreseen experimental setup, which does not provide electron identification in front of the magnetic field.
The Compressed Baryonic Matter (CBM) experiment will explore the phase diagram of strongly interacting matter in the region of high net baryonic densities. The matter at these extreme conditions will be produced and studied in heavy-ion collisions with a fixed target set-up.
The present work is dedicated to the main component of the CBM experiment - the Silicon Tracking System (STS). The STS comprises of 8 tracking stations with 1292 double sided silicon microstrip sensors. The STS has to enable the reconstruction of up to 1000 charged particle tracks per nucleus-nucleus interaction at the rate of up to 10 MHz, provide a momentum resolution of Δp/p =1%, and withstand the radiation load of up to 1 x 1014 neq/cm2 (neq — radiation dose of 1 MeV neutron equivalent). Self-triggering read-out electronics will be located on the periphery of the detecting planes, and connected to the sensors with low mass micro-cables.
During the R&D phase, as well as in the pre-series and series production phase, the characterization of the sensors, of the front-end electronics and of the complete detector modules has to be performed. It is evident that characterization of more than 1000 silicon microstrip sensors and later of complete detector modules is very time-consuming, and may even damage the objects if not performed carefully. One of the goals of this work was to develop a systematic procedure for the quality assurance for the double-sided silicon microstrip sensors. This includes static optical inspection and visual tests, passive electrical test (such as leakage current, bulk capacitance, inter-strip capacitance & resistances, bias resistance and coupling capacitance), radiation hardness and long-term stability. A strategy for the quality assurance of these sensors is presented, defining the various tests to be performed and the documentation of the results. The techniques and quality assurance criteria will be applied for the pre-series and series production.
With decreasing feature size and increase in functionality and structures, the classical mechanical probe approach for internal fault detection and functional testing faces increasing challenges. In the field of silicon based chips and sensors there is rarely any analysis on the topic of non-invasive or contact-less probing and characterization, despite the fact that the contact-less probing is becoming more and more important as the fabrication technologies become smaller and more susceptible to the parasitic impact of mechanical probes. The silicon micro-strip double sided sensors used in STS have a complex structure, such as 1024 metal electrodes, 2048 bias resistors, 2048 DC pads and 4098 AC pads for probing, several guard rings, and even more in the 6.2 cm x 6.2 cm prototype sensor. Photo-intrusive technique is the best solution for the characterization and investigation of crucial parameters related to the detector operation and its functionality. A photo-intrusive probing is a method in which a non-invasive pulsed laser of a desired wavelength is used to inject the photon into the bulk and resulting in electron-hole pairs (e-h). In a completely depleted silicon sensor the charge injected (or generated) by the pulsed laser beam could be detected as current and shall be used for characterization.
A non-invasive contact-less Laser Test System (LTS) was developed based on a pulsed laser to investigate properties of the silicon sensors. The set-up is able to inject charge locally and scan sensors(or detector modules) with a pulsed infra-red laser driven by a step motor. The LTS is designed to measure sensor response in an automatized procedure at several thousand positions across the sensor with focused infra-
red laser light (spot size = 12 μm , wavelength = 1060 nm). The duration (10 ns) and power (5 mW) of the laser pulses are selected such that the absorption of the laser light in the 300 μm thick silicon sensors produces a number of about 24000 electrons, which is similar to the charge created by the minimum ionizing particles (MIP) in these sensors. The set-up was used to developed characterization procedures to determine the charge sharing between strips, and to measure a qualitative uniformity of the sensor response over the whole active area. The prototype sensors which are tested with the set-up are small prototype sensors (256 strips, pitch = 50 μm on each side) and full-size detector modules (1024 strips/side and pitch = 58 μm). They are read-out using a self-triggering prototype read-out electronic ASIC called n-XYTER. Laser scans for amplitude response, charge sharing in the inter-strip region, and spot-size determination technique are reported. For the verification of the some design parameters, unique methods of determining coupling capacitance, and inter-strip capacitance have been developed. The modules were also tested with proton beams, and the charge sharing in the inter-strip region has been compared to the laser test results.
Understanding the hadron spectrum is one of the primary goals of non-perturbative QCD. Many predictions have experimentally been confirmed, others still remain under experimental investigation. Of particular interest is how gluonic excitations give rise to states with constituent glue. One class of such states are hybrid mesons that are predicted by theoretical models and Lattice QCD calculations. Searching for and understanding the nature of these states is a primary physics goal of the GlueX experiment at the CEBAF accelerator at Jefferson Lab. A search for a JPC = 1−− hybrid meson candidate, the Y(2175), in φ(1020)π+π+ and φ(1020)f0(980) channels in photoproduction on a proton target has been conducted. A first measurement of non-resonant φ(1020)π+π+ and φ(1020)f0(980) total cross sections in photoproduction has been performed. An upper limit on the resonance production cross section for the Y (2175) → φ(1020)π+π+ and Y (2175) → φ(1020)f0(980) channels are estimated. Since the analysis essentially depends on the quality of the charged kaon identification, also an optimization of particle identification through an improvement of the energy loss estimation in the central drift chamber by a truncated mean method has been investigated.
At sufficiently high temperatures and baryon densities, nuclear matter is expected to undergo a transition into the Quark-Gluon-Plasma (QGP) consisting of deconfined quarks and gluons and accompanied by chiral symmetry restoration. Signals of these two fundamental characteristics of Quantum-Chromo-Dynamics (QCD) can be studied in ultra-relativistic heavy-ion collisions producing a relatively large volume of high energy and nucleon densities as existent in the early universe. Dileptons are unique bulk-penetrating sources for this purpose since they penetrate through the surrounding medium with negligible interaction and are created throughout the entire evolution of the initially created fireball. A multitude of experiments at SIS18, SPS and RHIC have taken on the challenging task to measure these rare probes in a heavy-ion environment. NA60's results from high-quality dimuon measurements have identified the broadened ρ spectral function as favorable scenario to explain the low-mass dilepton excess, and partonic sources as dominant at intermediate dilepton masses.
Enabled by the addition of a TOF detector system in 2010, the first phase of the Beam Energy Scan (BES-I) at RHIC allows STAR to conduct an unprecedented energy-dependent study of dielectron production within a homogeneous experimental environment, and hence close the wide gap in the QCD phase diagram between SPS and top RHIC energies. This thesis concentrates on the understanding of the LMR enhancement regarding its invariant mass, transverse momentum and energy dependence. It studies dielectron production in Au+Au collisions at beam energies of 19.6, 27, 39, and 62.4 GeV with sufficient statistics. In conjunction with the published STAR results at top RHIC energy, this thesis presents results on the first comprehensive energy-dependent study of dielectron production.
This includes invariant mass- and transverse momenta-spectra for the four beam energies measured in 0-80% minimum-bias Au+Au collisions with high statistics up to 3.5 GeV/c² and 2.2 GeV/c, respectively. Their comparison with cocktail simulations of hadronic sources reveals a sizeable and steadily increasing excess yield in the LMR at all beam energies. The scenario of broadened in-medium ρ spectral functions proves to not only serve well as dominating underlying source but also to be universal in nature since it quantitatively and qualitatively explains the LMR enhancements measured over the wide range from SPS to top RHIC energies. It shows that most of the enhancement is governed by interactions of the ρ meson with thermal resonance excitations in the late(r)-stage hot and dense hadronic phase. This conclusion is supported by the energy-dependent measurement of integrated LMR excess yields and enhancement factors. The former do not exhibit a strong dependence on beam energy as expected from the approximately constant total baryon density above 20 GeV, and the latter show agreement with the CERES measurement at SPS energy. The consistency in excess yields and agreement with model calculations over the wide RHIC energy regime makes a strong case for LMR enhancements on the order of a factor 2-3.
The extent of the results presented here enables a more solid discussion of its relation to chiral symmetry restoration from a theoretical point of view. High-statistics measurements at BES-II hold the promise to confirm these conclusions along with the LMR enhancment's relation to total baryon density with decreasing beam energy.
In this thesis, the flow coefficients vn of the orders n = 1 − 6 are studied for protons and light nuclei in Au+Au collisions at Ebeam = 1.23 AGeV, equivalent to a center-of-mass energy in the nucleon-nucleon system of √sNN = 2.4 GeV. The detailed multi-differential measurement is performed with the HADES experiment at SIS18/GSI. HADES, with its large acceptance, covering almost full azimuth angle, combined with its high mass-resolution and good particle-identification capability, is well equipped to study the azimuthal flow pattern not only for protons, deuterons, and tritons but also for charged pions, kaons, the φ-mesons, electrons/positrons, as well as light nuclei like helions and alphas. The high statistics of more than seven billion Au-Au collisions recorded in April/May 2012 with HADES enables for the first time the measurement of higher order flow coefficients up to the 6th harmonic. Since the Fourier coefficient of 7th and 8th order are beyond the statistical significance only an upper bound is given. The Au+Au collision system is the largest reaction system with the highest particle multiplicities, which was measured so far with HADES. A dedicated correction method for the flow measurement had to be developed to cope with the reconstruction in-efficiencies due to occupancies of the detector system. The systematical bias of the flow measurement is studied and several sources of uncertainties identified, which mainly arise from the quality selection criteria applied to the analyzed tracks, the correction procedure for reconstruction inefficiencies, the procedures for particle identification (PID) and the effects of an azimuthally non-uniform detector acceptance. The systematic point-to-point uncertainties are determined separately for each particle type (proton, deuteron and triton), the order of the flow harmonics vn, and the centrality class. Further, the validity of the results is inspected in the range of their evaluated systematic uncertainties with several consistency checks. In order to enable meaningful comparisons between experimental observations and predictions of theoretical models, the classification of events should be well defined and in sufficiently narrow intervals of impact parameter. Part of this work included the implementation of the procedure to determine the centrality and orientation of the reaction.
In the conclusion the experimental results are discussed, including various scaling properties of the flow harmonics. It is found that the ratio v4/v2 for protons and light nuclei (deuterons and tritons) at midrapidity for all centrality classes approaches values close to 0.5 at high transverse momenta, which was suggested to be indicative for an ideal hydrodynamic behaviour. A remarkable scaling is observed in the pt dependence of v2 (v4) at mid-rapidity of the three hydrogen isotopes, when dividing by their nuclear mass number A (A^2) and pt by A. This is consistent with naive expectations from nucleon coalescence, butraises the question whether this mass ordering can also be explained by a hydrodynamical-inspired approach, like the blast-wave model. The relation of v2 and v4 to the shape of the initial eccentricity of the collision system is studied. It is found that v2 is independent of centrality for all three particle species after dividing it by the averaged second order participant eccentricity v2/⟨ε2⟩. A similar scaling is shown for v4 after division by ⟨ε2⟩^2.
The Compressed Baryonic Matter (CBM) Experiment will investigate heavy ion collisions and reactions at interaction rates of 100 kHz in a targeted energy range of up to 11 AGeV for systems such as gold-gold or lead-lead. It will be one of the major scientific experiments of the Facility for Antiproton and Ion Research in Europe (FAIR) currently under construction at the site of the GSI Helmholtzzentrum für Schwerionenforschung (GSI) in Darmstadt, Germany. CBM is going to be a fixed target experiment consisting of a superconducting magnet, multiple detectors of various types, and high-performance computing for online event reconstruction and selection. The detector closest to the interaction point of the experiment will be the Micro Vertex Detector (MVD). Consisting of four planar stations equipped with custom CMOS pixel sensors, it will allow to reconstruct the primary vertex with high precision and will help to reconstruct secondary vertices and identify particles originating from conversion in the detector material.
Due to the high interaction rates foreseen for CBM, understanding and minimizing systematic errors due to the detectors’ operating conditions will become all the more important to obtain significant measurement results, as statistical errors in the measurements of many observables are diminishing due to the enormous amount of data available.
Furthermore, the MVD will be the first detector based on CMOS pixel sensors used in a large physics experiment, that will be operated in vacuum. As a result, many aspects of the mechanical and electrical integration of the detector require careful testing and validation.
This thesis addresses both those challenges specifically for the Micro Vertex Detector with the development of a control system for the operation and validation of the MVD prototype “PRESTO” in vacuum. The prototype was selected as device under test as the final MVD is not yet built.
The developed control system helps a) to operate the prototype safely and keep it at the desired working point and b) to record important time-series data of the state of the detector prototype. Those two aspects allow the control system (which might later serve as a ‘blueprint’ for the final detector) to minimize the mentioned systematic errors as much as possible and to contribute to the understanding of remaining systematic errors using correlations with the time-series data. The controlled operation of the prototype in vacuum allowed to validate the integration concepts from a wide range of mechanical and electrical aspects in an endurance test for more than a year with 24/7 operation.
The prototype for this study itself was named “PRESTO” (standing for ‘PREcursor of the Second sTatiOn of the CBM-MVD’). It represents one quadrant of an MVD detector plane, equipped with a total of 15 MIMOSA-26 sensors on the front and back side of a carrier plate. Within this thesis, major parts of the prototype itself were designed. Custom ultra-thin flat flexible cables for data and power were designed and validated. Furthermore, the CNC-machined Aluminium heatsink to mount and cool the prototype design was refined to increase thermal performance. A custom vacuum feedthrough for a total of 21 flat ribbon cables was designed and fabricated. The read-out chain for MIMOSIS-26 was extended to cover a total of 8 sensors with a single and newer TRB-3 FPGA board and was set-up with the prototype. Vacuum equipment including chambers, hoses, pumps, valves and gauges were integrated to form a large vacuum testing system. A cooling circuit for the prototype was assembled comprising an external chiller, hoses, vacuum feedthroughs, as well as temperature, flow and pressure sensors.
The control system was developed to serve the needs of the prototype, while taking the requirements of the final MVD already into account. The main design goals of the control system are:
• compatibility with the other detectors and the overall CBM experiment,
• access to real-time measurements of all necessary parameters (‘process values’),
• reliable, fail-safe operation of the detector,
• recording of all time-series data (‘archiving’),
• cost efficiency and acceptance within the physics community,
• good usability for the users (‘operators’),
• long-term maintainability.
The recorded time-series data of the process variables (i.e. sensor readings) allow a post-measurement analysis of variations in the detector performance. The longterm archiving of all relevant system parameters is therefore of outstanding importance, which is why the software intended for this purpose – called “archiver” – was given special attention in this thesis.
For this reason in particular, it is necessary to implement a comprehensive control system that allows the detector to be operated safely under these conditions and cooled effectively. Before the start of this doctoral thesis, vigilant and extensively trained operators were always necessary for this. The control system that has been developed makes it possible that, after basic training, the detector can also be operated by a less specialised shift supervisor during measurement campaigns.
...