Refine
Year of publication
Document Type
- Doctoral Thesis (29)
- Master's Thesis (3)
Has Fulltext
- yes (32)
Is part of the Bibliography
- no (32)
Keywords
- HADES (4)
- CBM (2)
- CBM Experiment (2)
- Control System (2)
- Dileptonen (2)
- EPICS (2)
- Schwerionenphysik (2)
- Spurselektion (2)
- dileptons (2)
- heavy ion physics (2)
Institute
- Physik (32)
In April and May 2012 data on Au+Au collisions at beam energies of Ekin = 1.23A GeV were recorded with the High Acceptance Di-Electron Spectrometer, which is located at the GSI Helmholtz Center for Heavy Ion Research in Darmstadt, Germany. At this beam energy all hadrons containing strangeness are produced below their elementary production threshold. The required energy is not available in binary NN collisions but must be provided by the system e.g. through multi-particle interactions or medium effects like a modified in-medium potential (e.g. KN/ΛN potential). Thus, a high sensitivity to these medium effects is expected in the investigated system.
The baryon-dominated systems created in relativistic heavy-ion collisions (HIC) at SIS18 energies reach densities of about 2-3 times ground state density p0 and may be similar to the properties of matter expected in the inner core of neutron stars. It is in particular the behavior of hadrons containing strangeness, i.e. kaons and hyperons, and their potentials in the dense medium which may have severe implications on astrophysical objects and processes. As ab-initio calculations of quantum chromodynamics (QCD) cannot be performed rigorously on the lattice at finite baryo-chemical potentials due to the fermion sign problem, effective descriptions have to be used in order to model properties of dense systems and the involved particles. The only way to access the in-medium potential of strange hadrons above nuclear ground state density p0 is by comparing data from relativistic HIC to such effective microscopic models. Up to now, not much data on neutral kaons and Λ hyperons are available from heavy collision systems close to their NN production threshold. These two electromagnetically uncharged strange hadrons are in particular well suited to study their potential in a dense nucleon-dominated environment as their kinematic spectra are not affected by Coulomb interactions.
HADES (High Acceptance DiElectron Spectrometer), located at GSI, is a versatile detector for precise spectroscopy of e+ e- pairs and charged hadrons produced on a fixed target in a 1 to 3.5 AGeV kinetic beam energy region. The main experimental goal is to investigate properties of dense nuclear matter created in heavy ion collisions and learn about in-medium hadron properties.
In the HADES set-up 24 Mini Drift Chambers (MDC) allow for track reconstruction and determining the particle momentum by exploiting charged particle deflection in a magnetic field. In addition, the drift chambers contribute to particle identification by measuring the energy loss. The read-out concept foresees each sensing wire to be equipped with a preamplifier, analog pulse shaper and discriminator. In the current front-end electronics, the ASD-8 ASIC comprises the above modules. Due to limitations of the current on-board time to digital converters (TDC), especially regarding higher reaction rates expected at the future FAIR facility (HADES at SIS-100), the electronics need to be replaced by new board featuring multi-hit TDCs. Whereas ASD-8 chips cannot be procured anymore, a promising replacement candidate is the PASTTREC ASIC, developed by JU Krakow, which was tested w.r.t. suitability for MDC read-out in a variety of set-ups and, where possible, in direct comparison to ASD-8.
The timing precision, being the most crucial performance parameter of the joint system of detector and read-out electronics, was assessed in two different set-ups, i.e. a cosmic muon tracking set-up and a beam test at the COSY accelerator at Juelich using a minimum ionizing proton beam.
The beam test results were reproduced and can thus be quantitatively explained in a three dimensional GARFIELD simulation of a HADES MDC drift cell. In particular, the simulation is able to describe the characteristic dependence of the time precision on the track position within the cell.
A circuit simulation (SPICE) was used to closely model the time development of a raw drift chamber pulse, measured as a response to X-rays from a 55 Fe source. The insights gained from this model were used for attributing realistic charge values to the time over threshold values measured with the read-out ASICs in a charge calibration set-up. Furthermore, a high-level circuit simulation of the PASTTREC shaper is implemented to serve as a demonstration of the effect of the individual shaping and tail cancellation stages which are present in both ASICs.
In this thesis, different physical and electrical aspects of silicon microstrip sensors and low-mass multi-line readout cables have been investigated. These silicon microstrip sensors and readout cables will be used in the Silicon Tracking System (STS) of the fixed-target heavy-ion Compressed Baryonic Matter (CBM) experiment which is under development at the upcoming Facility for Antiproton and ion Research (FAIR) in Darmstadt, Germany. The highly segmented low-mass tracking system is a central CBM detector system to resolve the high tracking densities of charged particles originating from beam-target interactions. Considering the low material budget requirement the double-sided silicon microstrip detectors have been used in several planar tracking stations. The readout electronics is planned to be installed at the periphery of the tracking stations along with the cooling system. Low-mass multi-line readout cables shall bridge the distance between the microstrip sensors and the readout electronics. The CBM running operational scenario suggests that some parts of the tracking stations are expected to be exposed to a total integrated particle fluence of the order of 1e14 neq/cm2. After 1e14 neq/cm2 the damaged modules in the tracking stations will be replaced. Thus radiation hard sensor is an important requirement for the sensors. Moreover, to cope with the high reaction rates, free-streaming (triggerless) readout electronics with online event reconstruction must be used which require high signal-to-noise (SNR) ratio (i.e., high signal efficiency, low noise contributions). Therefore, reduction in noise is a major goal of the sensor and cable development.
For better insight into the different aspects of the silicon microstrip sensors and multi-line readout cables, the simulation study has been performed using SYNOPSYS TCAD tools. 3D models of the silicon microstrip sensors and the readout cables were implemented which is motivated by the stereoscopic construction of the silicon microstrip sensors. For the evaluation of the performance of the silicon microstrip sensors in the harsh radiation environment during experimental operation, a radiation damage model has been included. It reproduces the behavior of the irradiated CBM prototype sensors. In addition to the static characteristics, the interstrip parameters relevant to understand strip isolation and cross-talk issues have been extracted. The transient simulations have been performed to estimate the charge collection performance of the irradiated sensors. The signal transmission in the readout cables has been evaluated with the finite element simulation tool RAPHAEL. Based on the performance of the front-end electronics used for early prototyping in the CBM experiment, capacitive and resistive noise contributions from the silicon microstrip sensors and multi-line readout cables have been extracted.
To validate the aforementioned simulations, numerous tests have been performed both on the multi-line readout cables and silicon microstrip sensors. Characterizations of multi-line readout cables and silicon microstrip sensors in laboratory conditions have been found to agree reasonably well with the simulations. Considering the expected radiation environment the behavior of silicon microstrip sensors have been studied especially in terms of noise and charge collection efficiency. Source-scan of the silicon microstrip sensors using 241Am is presented. In order to test a first system of detector stations including the data acquisition system, slow control and online monitoring software and for track reconstruction, in-beam tests have been performed at the COSY synchrotron of the Research Center Juelich, Germany. Further, different design parameters have been suggested to improve the sensor and readout cable design on the basis of the simulations and the measurements. Many of these parameters have been implemented in the new prototypes under production. These new prototypes will be tested in-beam by the end of 2013.
The study of meson production in proton-proton collisions in the energy range
up to one GeV above the production threshold provides valuable information about
the nature of the nucleon-nucleon interaction. Theoretical models describe the interaction
between nucleons via the exchange of mesons. In such models, different
mechanisms contribute to the production of the mesons in nucleon-nucleon collisions.
The measurement of total and differential production cross sections provide information
which can help in determining the magnitude of the various mechanisms.
Moreover, such cross section information serves as an input to the transport calculations
which describe e.g. the production of e+e− pairs in proton- and pion-induced
reactions as well as in heavy ion collisions.
In this thesis, the production of ω and η mesons in proton-proton collisions at 3.5
GeV beam energy was studied using the High Acceptance DiElectron Spectrometer
(HADES) installed at the Schwerionensynchrotron (SIS 18) at the Helmholtzzenturm
f¨ur Schwerionenforschung in Darmstadt.
About 80 000 ω mesons and 35 000 η mesons were reconstructed. Total production
cross sections of both mesons were determined. Furthermore, the collected statistics
allowed for extracting angular distributions of both mesons as well as performing
Dalitz plot studies.
The ω and η mesons were reconstructed via their decay into three pions (π+π−π0)
in the exclusive reaction pp −→ ppπ+π−π0. The charged particles were identified
via their characteristic energy loss, via the measurement of their time of flight and
momentum, or using kinematics.
The neutral pion was reconstructed using the missing mass method. A kinematic
fit was applied to improve the resolution and to select events in which a π0 was
produced.
The correction of measured yields for the effects of spectrometer acceptance was done
as a function of four variables (two invariant masses and two angles). Systematic
studies of the acceptance for different input distributions were performed.
The measured yields were normalized to the number of measured events of elastic
scattering. Systematic errors due to the methods of the data analysis and the
background subtraction were investigated.
Production angular distributions of ω and η mesons were measured. Both mesons
exhibit a slightly anisotropic angular distribution.
The Dalitz plot of ω meson production shows indications of resonant production.
However, the deviation of the distribution from the one expected by phase space
simulations is not large.
The Dalitz plot of η meson production shows a signal of the production via the
N(1535) resonance, The contribution of N(1535) to the production was quantified
to be about 47%. The angular distribution of η mesons does not show significant
differences between resonant and non resonant production.
The total production cross section of ω mesons in the reaction pp −→ ppω was
determined to be 106.5 ± 0.9 (stat) ± 7.9 (sys) [μb] where stat indicates statistical
error and sys indicates systematic error, while that of η mesons was determined to
be 136.9 ± 0.9 (stat) ± 10.1 (sys) [μb] in the reaction pp −→ ppη
Sensors for high rate charge particle tracking have to withstand the harsh radiation doses deposited by the particles to be sensed. This holds particularly for the novel CMOS Monolithic Active Pixel Sensors, which are considered a promising sensor technology for future vertex detectors due to their very light material budget and excellent spatial resolution. To resist the radiation doses expected close to the interaction regions of heavy-ion experiments, the sensors have to be hardened against radiation doses, which exceed the native tolerance of CMOS technology significantly. In this thesis, the results of non-ionizing radiation hardness studies at the IKF on sensor prototypes developed at the IPHC in Strasbourg are presented. Our results demonstrate that the CMOS sensors evaluated in the context of this thesis can withstand non-ionizing radiation of up to 5×10^14 neq/cm^2. This hardness qualifies them as promising candidates for use in future vertex detectors.
In this thesis, the emission of protons as well as the production of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are analyzed multi-differentially as a function of transverse momentum, rapidity and centrality. Therefore, the 3.03 billion 30 % most central Ag(1.58A GeV)+Ag events recorded by HADES are used. Furthermore, the lifetimes of Λ hyperons, Κ0S mesons and 3ΛH hypernuclei are measured. The obtained 3ΛH lifetime of (253 ± 24 ± 42) ps is compatible with the lifetime of free Λ hyperons, as predicted by theoretic calculations due to its low binding energy. Finally, also the double strange Ξ– hyperons are reconstructed. Unfortunately, the fully optimized signals lie below the confidence threshold of 5σ, which is why both an production rate and an upper production limit are estimated using averaged acceptance and efficiency corrections. Never before, 3ΛH or Ξ– were successfully reconstructed and analyzed in heavy-ion collisions at such low energies. The obtained results are compared to previous measurements and put in context with world data form different energies and collision systems.
Das Compressed Baryonic Matter Experiment (CBM) wird im Rahmen der Facility for Antiproton and Ion Research (FAIR) entwickelt, um das Phasendiagramm stark wechselwirkender Materie vorwiegend im Bereich hoher Dichte ausgiebig zu studieren. Dazu sollen Kollisionen schwerer Ionen durchgeführt werden und die Reaktionsprodukte mit hoher Präzision in Teilchendetektoren gemessen und identfiziert werden. Eine wichtige Aufgabe besteht in der Unterscheidung von Elektronen und Pionen, zu der ein Übergangsstrahlungszähler (Transition Radiation Detector) beiträgt. Übergangsstrahlung wird im relevanten Impulsbereich dieser Teilchen nur von Elektronen emittiert und soll im Detektor registriert werden.
In der vorliegenden Arbeit wird die Entwicklung dieses Detektors auf Basis von Vieldrahtproportionalkammern (Multiwire Proportional Chamber ) hauptsächlich anhand von Simulationen diskutiert, aber auch erste Testmessungen eines Prototypen vorgestellt. Der Schwerpunkt der Simulationen eines einzelnen Detektors liegt in der Untersuchung der Effiienz in Abhängigkeit seiner Dicke.
Der Übergangsstrahlungszähler für CBM wird aus mehreren Detektorlagen bestehen. Daher wird außerdem die Effizienz des Gesamtsystems analysiert, indem verschiedene Methoden zur Kombination der einzelnen Signale angewendet werden. Darüber hinaus wird die Effizienz des verfolgten Detektorkonzepts in Abhängigkeit des Radiators, der Anzahl der Detektorlagen, sowie des Teilchenimpulses präsentiert.
Lepton pairs emerging from decays of virtual photons represent promising probes of nuclear matter under extreme conditions of temperature and density. These etreme conditions can be reached in heavy-ion collisions in various facilities around the world. Hereby the collision energy in the center-of-mass system (√SNN) varies from few GeV (SIS) to the TeV (LHC). In the energy domain of 1 - 2 GeV per nucleon (GeV/u), the HADES experiment at GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt studies dielectrons and strangeness production.
Various reactions, for example collisions of pions, protons, deuterons and heavy-ions with nuclei have been studied since its installation in the year 2001. Hereby the so called DLS Puzzle was solved experimentally, with remeasuring C+C at 1 and 2 GeV/u and by careful studies of inclusive pp and pn reactions at 1.25 GeV. With these measurements the so-called reference spectrum was established. Measurements of e+ e− production Ar+KCl showed an enhancement on the dilepton spectrum above the trivial NN back-
ground. Theory predicts a strong enhancement of medium radiation with the system size, due to large production of fast decaying baryonic resonances like ∆ and N∗ . The heaviest system measured so far was Au+Au at a kinetic beam energy of 1.23 GeV/u. The precise determination of the medium radiation depends
on a precise knowledge of the underlying hadronic cocktail composed of various sources contributing to the measured dilepton spectrum. In general the medium radiation needs to be separated from contributions coming from long-lived particles, that decay after the freeze out of the system. For a more model independent
understanding of the dilepton cocktail the production cross sections of these particles need to measured independently. In the related energy regime the main contributers are π0 and η Dalitz decays. Both mesons have a dominant decay into two real photons and have been reconstructed successfully in this channel. Since HADES has no electromagnetic calorimeter the mesons can not be identified in this decay channel directly. In this thesis the capability of HADES to detect e+ e− pairs from conversions of real photons is demonstrated.
Therefore not only the conversion probability but also the resulting efficiencies are shown. Furthermore, the reconstruction method for neutral mesons will be explained and the resulting spectra are interpreted. The measurement of neutral pions is compared to the independent measured charged pion distribution, and
extrapolated to full phase space. An integrated approach is used to determine the η yield. Both measurement are compared to the world data and to theory model claculations. Finally, the measurements will be used together with the reconstructed dilepton spectra to determine the amount and the properties of in medium radiation in the Au+Au system.
QCD matter is expected to exist in different phases, when heated to high temperatures and getting highly compressed. Each phase could be characterized by distinct properties. A way to access extreme phases of matter in the laboratory are heavy-ion collisions at (ultra-)relativistic energies. During the collision, the temperature and density is evolving and reaches a maximum temperature and density far beyond the ground state of matter. The matter properties depend on the incident collision energy. Typically, a collision is separated into three collisions stages, namely first chance collisions (I), hot and dense stage (II) and freeze-out stage (III). Out of those, the second one is of major interest, since the extreme states of matter are generated within. For this reason, the most prominent change of the hadrons is expected to appear there in. Those changes are caused by i.e. modification of the hadronic spectral function. However, to retrieve such information is complicated. Hadrons are strongly interacting particles and therefore, carry little information about the hot and dense stage. For that purpose, decays of hadrons (low-mass vector mesons) to e+e- pairs via a virtual photon, so-called dielectrons, are an ideal probe. Electrons and positrons do not interact strongly and transport the information about the hot and dense stage nearly undisturbed to the detector. Unfortunately, the production of dielectrons is suppressed by a branching ratio of ≈ 10^(-5) and requires a precise lepton identification. Nonetheless, previous experiments have extracted a dilepton signal and observed in the low-mass range an excess over the hadronic cocktail. Latter one is expected to be caused by thermal radiation induced by the medium. Up to now, experiments conducted dilepton measurements with a focus on larger collision energies and large collision systems. Measurements of dielectrons at collision energies of around 1-2A GeV were only conducted for small and medium size collision systems. HADES continued the systematic studies by a measurement of Au+Au collisions at 1.23A GeV.
The detection of dielectrons requires detectors that handle high data rates and specific detectors for a high purity lepton identification. In HADES, the strongest separation of electrons or positrons from the hadronic background is provided by a ring imaging Cherenkov detector (RICH). Its electron identification is based on Cherenkov photons, that are emitted in ring like patterns. In this work a new approach, using the time-of-flight information to preselect electrons and the reconstructed particle trajectory to estimate ring positions, is utilized to improve the lepton identification. The concept of the so-called backtracking algorithm will be explained and applied to e+e- identification in Au+Au collisions. The whole analysis chain comprises single lepton identification, pair reconstruction and correction for efficiency and acceptance losses. The final pair spectra will be presented in form of their invariant mass, pt, mt and helicity distributions. Subsequently, transport model calculations as well as results from the recently developed coarse-grained transport approach will be compared to the dielectron spectra. Moreover, the centrality dependence of the excess yield and true (not "blue-shifted") temperature of the fireball will be presented. The results will be put in context to measurements of lighter collisions systems and at higher energies.
Im September 2005 wurden von der HADES-Kollaboration an der GSI in Darmstadt Daten der Schwerionen-Reaktion Ar+KCl bei 1,76A GeV aufgenommen. Neben den Pionen und Dileptonen wurden bereits fast alle Teilchen mit Seltsamkeitsinhalt rekonstruiert. In dieser Arbeit wird zum ersten Mal eine Analyse der leichten Fragmente Deuteronen, Tritonen und 3Helium mit HADES durchgeführt.
Die gemessenen Multiplizitäten wurden mit einem statistischen Hadronisationsmodell verglichen und zeigen gute Übereinstimmung mit diesem. Dies legt die Vermutung nahe, dass das System Ar+KCl bei 1,76A GeV einen hohen Grad an Thermalisierung erreicht. Zu einer weiteren Untersuchung dieser Hypothese wurden die sogenannten effektiven Temperaturen Teff der Teilchen der chemischen Ausfriertemperatur aus dem statistischen Modellfit gegenübergestellt. Bei der effektiven Temperatur handelt es sich um die inversen Steigungsparameter von Boltzmann-Fits an die transversalen Massenspektren mt-m0 bei Schwerpunktsrapidität. Diese Temperatur entspricht bei einer isotropen, statischen Quelle der kinetischen Ausfriertemperatur und sollte somit unterhalb oder gleich der chemischen Ausfriertemperatur sein. Im Falle der effektiven Temperaturen der Ar+KCl-Daten liegen diese jedoch systematisch höher und die Teilchen ohne Seltsamkeitsinhalt zeigen einen massenabhängigen Anstieg, welcher eine radiale kollektive Anregung des Systems vermuten lässt.
Die transversalen Massenspektren der leichten Fragmente werden unter der Annahme eines thermalisierten Systems mit Boltzmann-Funktionen angepasst. Daraus werden die effektiven Temperaturen von Teff,Deuteronen = (139,5 ± 34,9) MeV und Teff,T ritonen = (247,9 ± 62,0) MeV extrahiert, was die Annahme von kollektivem Fluss der Teilchen zu unterstützen scheint. Vergleicht man diese Werte mit den effektiven Temperaturen der leichteren Teilchen, kann mithilfe einer linearen Funktion die kinetische Ausfriertemperatur Tkin = (74,7 ± 5,8) MeV und radiale Flussgeschwindigkeit βr = 0,37 ± 0,13 bestimmt werden. In einem zweiten Ansatz werden daher die Spektren mit Siemens-Rasmussen-Funktionen, die eine radiale Ausdehnung mit einbeziehen, angepasst und daraus die globalen Parameter T = (74 ± 7) MeV und βr = 0,36 ± 0,02 bestimmt. Diese Werte liegen an der oberen Grenze in dem für diesen Energiebereich erwarteten Bereich.
Die Siemens-Rasmussen-Funktionen liefern eine bessere Beschreibung der transversalen Massenspektren und werden zur Extrapolation der nicht abgedeckten transversalen Massenbereiche genutzt. Die Integration liefert die Verteilung der Zählrate als Funktion der Rapidität. Diese Verteilung zeigt zwei Maxima nahe Strahl- und Target-Rapidität, was im Widerspruch zu einer statischen, thermischen Quelle der Teilchen steht.