Conference Proceeding
Refine
Year of publication
Document Type
- Conference Proceeding (248) (remove)
Has Fulltext
- yes (248)
Is part of the Bibliography
- no (248)
Keywords
Institute
- Physik (248) (remove)
Collective flow phenomena are a sensitive probe for the properties of extreme QCD matter. However, their interpretation relies on the understanding of the initial conditions e.g. the eccentricity of the nuclear overlap region. HADES [1] provides a large acceptance combined with a high mass-resolution and therefore allows to study di-electron and hadron production in heavy-ion collisions with unprecedented precision. In this contribution, the capability of HADES to study flow harmonics by utilizing multi-particle azimuthal correlation techniques is discussed. Due to the high statistics of seven billion Au+Au collisions at 1.23 AGeV collected in 2012, a systematic study of higher-order flow harmonics, the differentiation between collective and non-flow effects, and as well the multi-differential (pt, rapidity, centrality) analysis is possible.
We investigate BB̅ systems by computing potentials of two static quarks in the presence of two quarks of finite mass using lattice QCD. By solving the Schrodinger equation we check whether these potentials are sufficiently attractive to host bound states. Particular focus is put on the experimentally most promising bottomonium-like tetraquark candidate Zb± with quantum numbers I(JP) = 1(1+).
There are only 3 methods for the production of heavy and superheavy (SH) nuclei, namely, fusion reactions, a sequence of neutron capture and beta(-) decay and multinucleon transfer reactions. Low values of the fusion cross sections and very short half-lives of nuclei with Z<120 put obstacles in synthesis of new elements. At the same time, an important area of SH isotopes located between those produced in the cold and hot fusion reactions remains unstudied yet. This gap could be filled in fusion reactions of 48Ca with available lighter isotopes of Pu, Am, and Cm. New neutron-enriched isotopes of SH elements may be produced with the use of a 48Ca beam if a 250Cm target would be prepared. In this case we get a real chance to reach the island of stability owing to a possible beta(+) decay of 291114 and 287112 nuclei formed in this reaction with a cross section of about 0.8 pb. A macroscopic amount of the long-living SH nuclei located at the island of stability may be produced by using the pulsed nuclear reactors of the next generation only if the neutron fluence per pulse will be increased by about three orders of magnitude. Multinucleon transfer processes look quite promising for the production and study of neutron-rich heavy nuclei located in upper part of the nuclear map not reachable by other reaction mechanisms. Reactions with actinide beams and targets are of special interest for synthesis of new neutron-enriched transfermium nuclei and not-yet-known nuclei with closed neutron shell N=126 having the largest impact on the astrophysical r-process. The estimated cross sections for the production of these nuclei allows one to plan such experiments at currently available accelerators.
We present an overview on the resonance dynamics within the microscopic parton-hadron-string dynamics (PHSD) approach which incorporates explicit partonic degrees-of-freedom in terms of strongly interacting quasiparticles (quarks and gluons) in line with an equation-of-state from lattice QCD as well as the dynamical hadronization and hadronic collision dynamics in the final reaction phase. We discuss how the vector meson resonances can be used as a probe of the in-medium effects and demostrate that the low mass dilepton spectra show visible in-medium effects from dynamical vector-meson spectral functions from SIS to SPS energies whereas at RHIC and LHC energies such medium effects become more moderate. We show also that the intermediate mass spectra are dominated by the radiation from the partonic degrees of freedom at RHIC and LHC energies.
p-process nucleosynthesis via proton-capture reactions in thermonuclear supernovae explosions
(2015)
Model calculations within the framework of the so-called γ process show an underproduction of the p nucleus with the highest isotopic abundace 92Mo. This discrepancy can be narrowed by taking into account the alternative production site of a type Ia supernova explosion. Here, the nucleus 92Mo can be produced by a sequence of proton-capture reactions. The amount of 92Mo nuclei produced via this reaction chain is most sensitive to the reactions 90Zr(p,γ) and 91Nb(p,γ). Both rates have to be investigated experimentally to study the impact of this nucleosynthesis aspect on the long-standing 92Mo-problem. We have already measured the proton-capture reaction on 90Zr using high-resolution in-beam γ-ray spectroscopy. In this contribution, we will present our preliminary results of the total cross sections as well as the partial cross sections. Furthermore, we plan to measure the 91Nb(p,γ) reaction soon. Due to the radioactive target material, the 91Nb nuclei have to be produced prior to the experiment. The current status of this production will be presented in this contribution.
We discuss the effects of the final hadronic state, in ultra-relativistic nuclear collisions, on hadronic resonance properties and measurable production rates. In particular we will compare our results with recent ALICE data on resonance production. We show that the hadronic phase of the system evolution has a considerable impact on the measured resonance ratios and pT spectra. We also discuss some of the remaining uncertainties in the model and how they may be addressed in future studies.
An overview is given on the experimental study of physics with relativistic heavy-ion collisions, with emphasis on recent measurements at the Large Hadron Collider (LHC) and the Relativistic Heavy Ion Collider (RHIC). The focus here is laid on p–Pb collisions at the LHC and the corresponding d–Au measurements at RHIC. The topics touched are “collectivity and approach to equilibrium”, “high pT and jets”, “heavy flavour and electroweak bosons” and “search for exotic objects”.
The dynamics of strange vector meson resonances (K* and K̄*) is investigated within the Parton-Hadron-String Dynamics (PHSD) transport approach. We present the time evolution of the production of K*− resonances from the QGP phase by quark fusion as well as from hadronic sources. We also give a brief overview of the modification of the K* through Kπ decay and K*N interaction in a hot and dense nuclear medium.
We compute potentials of two static antiquarks in the presence of two quarks qq of finite mass using lattice QCD. In a second step we solve the Schrödinger equation, to determine, whether the resulting potentials are sufficiently attractive to host a bound state, which would indicate the existence of a stable qqb¯b¯ tetraquark. We find a bound state for qq=(ud−du)/2–√ with corresponding quantum numbers I(JP)=0(1+) and evidence against the existence of bound states with isospin I=1 or qq∈{cc,ss}.
XIII Nuclei in the Cosmos, 7-11 July, 2014 Debrecen, Hungary.
As an alternative production scenario to the so-called g process, the most abundant p nucleus 92Mo may be produced by a chain of proton-capture reactions in supernovae type Ia. The reactions 90Zr(p,g) and 91Nb(p,g) are the most important reactions in this chain. We have measured the first reaction using high-resolution in-beam g-spectroscopy at HORUS, Cologne, Germany, to contribute to the existing experimental data base. So far, we only investigated the high-energy part of the Gamow window and the analysis is still in progress. We plan to study the second reaction in standard kinematics at the FRANZ facility, Frankfurt, Germany. Current developments at FRANZ will be explained in detail.
We investigate the properties of the QCD matter across the deconfinement phase transition. In the scope of the parton-hadron string dynamics (PHSD) transport approach, we study the strongly interacting matter in equilibrium as well as the out-of equilibrium dynamics of relativistic heavy-ion collisions. We present here in particular the results on the electromagnetic radiation, i.e. photon and dilepton production, in relativistic heavy-ion collisions and the relevant correlator in equilibrium, i.e. the electric conductivity. By comparing our calculations for the heavy-ion collisions to the available data, we determine the relative importance of the various production sources and address the possible origin of the observed strong elliptic flow ν2 of direct photons.
We discuss recent applications of the partonic perturbative QCD based cascade model BAMPS with focus on heavy-ion phenomenology in the hard and soft momentum range. First, the elliptic flow and suppression of charm and bottom quarks are studied at LHC energies. Thereafter, we compare in a detailed study the standard Gunion-Bertsch approximation of the matrix elements for inelastic processes to the exact results in leading order perturbative QCD. Since a disagreement is found, we propose an improved Gunion-Bertsch matrix element, which agrees with the exact result in all phase space regions.
We have measured the radiative neutron-capture cross section and the total neutron-induced cross section of one of the most important isotopes for the s process, the 25Mg. The measurements have been carried out at the neutron time-of-flight facilities n_TOF at CERN (Switzerland) and GELINA installed at the EC-JRC-IRMM (Belgium). The cross sections as a function of neutron energy have been measured up to approximately 300 keV, covering the energy region of interest to the s process. The data analysis is ongoing and preliminary results show the potential relevance for the s process.
We present the results of two-pion production in tagged quasi-free np collisions at a deutron incident beam energy of 1.25 GeV/c measured with the High-Acceptance Di-Electron Spectrometer (HADES) installed at GSI. The specific acceptance of HADES allowed for the first time to obtain high-precision data on π+π− and π−π0 production in np collisions in a region corresponding to large transverse momenta of the secondary particles. The obtained differential cross section data provide strong constraints on the production mechanisms and on the various baryon resonance contributions (∆∆, N(1440), N(1520), ∆(1600)). The invariant mass and angular distributions from the np → npπ+π −and np → ppπ−π0 reactions are compared with different theoretical model predictions.
We present results for calculating fusion cross-sections using a new microscopic approach based on a time-dependent density-constrained DFT calculations. The theory is implemented by using densities and other information obtained from TDDFT time-evolution of the nuclear system as a constraint on the density for DFT calculations.
We have studied one-proton-removal reactions of about 500MeV/u 17Ne beams on a carbon target at the R3B/LAND setup at GSI by detecting beam-like 15O-p and determining their relative-energy distribution. We exclusively selected the removal of a 17Ne halo proton, and the Glauber-model analysis of the 16F momentum distribution resulted in an s2 contribution in the 17Ne ground state of about 40%.
We study the impact of nonequilibrium effects on the relevant signals within a chiral fluid dynamics model including explicit propagation of the Polyakov loop. An expanding heat bath of quarks is coupled to the Langevin dynamics of the order parameter fields. The model is able to describe relaxational processes, including critical slowing down and the enhancement of soft modes near the critical point. At the first-order phase transition we observe domain formation and phase coexistence in the sigma and Polyakov loop field leading to a significant amount of clumping in the energy density. This effect gets even more pronounced if we go to systems at finite baryon density. Here the formation of high-density clusters could provide an important observable signal for upcoming experiments at FAIR and NICA.We conclude that improving our understanding of dynamical symmetry breaking is important to give realistic estimates for experimental observables connected to the QCD phase transition.
We analyze hadrochemical freeze-out in central Pb+Pb collisions at CERN SPS and LHC energies. Employing the UrQMD hybrid transport model we study the effects of the final hadron/resonance expansion phase on the hadron multiplicities established at hadronization. The bulk meson yields freeze out directly at hadronization whereas the baryon-antibaryon sector is subject to significant alterations, due to annihilation and regeneration processes. We quantify the latter changes by survival factors for each species which are applied to modify the statistical model predictions for the data. The modified SM analysis recovers the hadronization points, which coincide with the recent lattice QCD predictions of the parton-hadron transition line at finite baryochemical potential.
Recent results on baryon production in relativistic heavy ion collisions show that a revision of the chemical freeze-out conditions is necessary. Particularly, there is evidence that chemical freezeout does not occur at full chemical equilibrium. We present a method to reconstruct original hadronization conditions and show that the newly found points in the T − µB plane are in very good agreement with extrapolations of the lattice QCD critical line.
Spinodal crumbling
(2013)
Extending a previously developed two-phase equation of state, we simulate head-on relativistic lead-lead collisions with fluid dynamics, augmented with a finite-range term, and study the effects of the phase structure on the evolution of the baryon density. For collision energies that bring the bulk of the system into the mechanically unstable spinodal region of the phase diagram, the density irregularities are being amplified significantly. We also present results for the associated clump size distribution.
The physics of EPOS
(2013)
poster presentation at the 31st International Symposium on Lattice Field Theory LATTICE 2013:
We explore and compare three mixed action setups with Wilson twisted mass sea quarks and different valence quark actions: (1) Wilson twisted mass, (2) Wilson twisted mass + clover and (3) Wilson + clover. Our main goal is to reduce lattice discretization errors in mesonic spectral quantities, in particular to reduce twisted mass parity and isospin breaking.
We derive the Polyakov-loop thermodynamic potential in the perturbative approach to pure SU(3) Yang-Mills theory. The potential expressed in terms of the Polyakov loop in the fundamental representation corresponds to that of the strong-coupling expansion, of which the relevant coefficients of the gluon energy distribution are specified by characters of the SU(3) group. At high temperature, the potential exhibits the correct asymptotic behavior, whereas at low temperature, it disfavors gluons as appropriate dynamical degrees of freedom. To quantify the Yang-Mills thermodynamics in confined phase, we introduce a hybrid approach which matches the effective gluon potential to that of glueballs, constrained by the QCD trace anomaly in terms of dilaton fields.
The study of energy and system size dependence of fluctuations of identified hadrons is one of the key goals of NA61/SHINE at the CERN SPS. Results may allow to discover the critical point (CP) of strongly interacting matter as well as to uncover properties of the onset of deconfinement (OD). Measured fluctuations are affected by numerous other effects like volume fluctuations and conservation laws. NA49 seems to observe fluctuations possibly related to the CP in collisions of medium size nuclei at the top SPS energy. However, this result will remain inconclusive until systematic data on energy and system size dependence will be available. Moreover, fluctuations in p+p as well as in Pb+Pb interactions should be better understood. In this contribution new results on multiplicity fluctuations of identified hadrons in p+p interactions at the CERN SPS energies will be presented. The NA61 data will be compared with the corresponding results on central Pb+Pb collisions of NA49 in the common acceptance region of both experiments. Furthermore, predictions of models (EPOS, UrQMD and HSD) for p+p interactions will be tested.
The QGP that might be created in ultrarelativistic heavy-ion collisions is expected to radiate thermal dilepton radiation. However, this thermal dilepton radiation interferes with dileptons originating from hadron decays. In the invariant mass region between the f and J=y peak (1GeV <= M l+l <=. 3GeV) the most substantial background of hadron decays originates from correlated DD¯ -meson decays. We evaluate this background using a Langevin simulation for charm quarks. As background medium we utilize the well-tested UrQMD-hybrid model. The required drag and diffusion coefficients are taken from a resonance approach. The decoupling of the charm quarks from the hot medium is performed at a temperature of 130MeV and as hadronization mechanism a coalescence approach is chosen. This model for charm quark interactions with the medium has already been successfully applied to the study of the medium modification and the elliptic flow at FAIR, RHIC and LHC energies. In this proceeding we present our results for the dilepton radiation from correlated D¯D decays at RHIC energy in comparison to PHENIX measurements in the invariant mass range between 1 and 3 GeV using different interaction scenarios. These results can be utilized to estimate the thermal QGP radiation.
As microscopic transport models usually have difficulties to deal with in-medium effects in heavy-ion collisions, we present an alternative approach that uses coarse-grained output from transport calculations with the UrQMD model to determine thermal dilepton emission rates. A four-dimensional space-time grid is set up to extract local baryon and energy densities, respectively temperature and baryon chemical potential. The lepton pair emission is then calculated for each cell of the grid using thermal equilibrium rates. In the current investigation we inlcude the medium-modified r spectral function by Eletsky et al., as well as contributions from the QGP and four-pion interactions for high collision energies. First dielectron invariant mass spectra for Au+Au collisions at 1.25 AGeV and for dimuons from In+In at 158 AGeV are shown. At 1.25 AGeV a clear enhancement of the total dilepton yield as compared to a pure transport result is observed. In the latter case, we compare our outcome with the NA60 dimuon excess data. Here a good agreement is achieved, but the yield in the low-mass tail is underestimated. In general the results show that the coarse-graining approach gives reasonable results and can cover a broad collision-energy range.
We report on the event-by-event multiplicity fluctuations of identified particles in central Pb+Pb collisions measured by the NA49 experiment at the CERN SPS. Employing a novel approach we unfolded the moments of the unknown multiplicity distributions of protons (p), kaons (K), pions (π) and electrons. Using these moments we reconstructed an excitation function of the fluctuation measure νdyn[A;B], with A and B denoting different particle types. Specifically, we reconstructed νdyn for the [p, π], [p, K] and [K, π] pairs. The energy dependence of νdyn is in agreement with previously published NA49 results on the related measure σdyn. Moreover, for [K; p] and [K;p] pairs, we discovered a dependence of the fluctuation measure νdyn on the phase space coverage (acceptance). Interestingly for the [p,π] case no significant acceptance dependence was observed. These observations provide a likely explanation of the reported differences between measurements of NA49 and those of STAR in central Au+Au collisions.
Using a partonic transport model we investigate the evolution of conical structures in ultrarelativistic matter. Using two different source terms and varying the transport properties of the matter we study the formation of Mach Cones. Furthermore, in an additional study we extract the two-particle correlations from the numerical calculations and compare them to an analytical approximation. The influence of the viscosity to the shape of Mach Cones and the corresponding two-particle correlations is studied by adjusting the cross section of the medium.
The Compressed Baryonic Matter (CBM) experiment [1] is a fixed target heavy-ion experiment that will operate at the international Facility for Antiproton and Ion Research (FAIR) [2] now under construction in Darmstadt, Germany. The experiment intends to study rare probes, which are emitted from heavy ion collisions with a beam energy of 4 to 45 AGeV. A focus is laid to the short lived open charm particles and to particles decaying into di-lepton pairs. Handling the up to 107 Au+Au collisions/s required for generating those probes with sufficient statistics, as much as reaching the required sensitivity for observing them, forms a major challenge for the silicon detectors of the experiment. We present the concept and the development status of two central detectors of CBM, the CMOS pixel based micro vertex detector (MVD) and the micro-strip detector based silicon tracking system (STS).
22nd International Workshop on Vertex Detectors, 15-20 September 2013 Lake Starnberg, Germany
While the existence of a strongly interacting state of matter, known as “quark-gluon plasma” (QGP), has been established in heavy ion collision experiments in the past decade, the task remains to map out the transition from the hadronic matter to the QGP. This is done by measuring the dependence of key observables (such as particle suppression and elliptic flow) on the collision energy of the heavy ions. This procedure, known as "beam energy scan", has been most recently performed at the Relativistic Heavy Ion Collider (RHIC).
Utilizing a Boltzmann+hydrodynamics hybrid model, we study the collision energy dependence of initial state eccentricities and the final state elliptic and triangular flow. This approach is well suited to investigate the relative importance of hydrodynamics and hadron transport at different collision energies.
This work presents an effective model for strongly interacting matter and the QCD equation of state (EoS). The model includes both hadron and quark degrees of freedom and takes into account the transition of chiral symmetry restoration as well as the deconfinement phase transition. At low temperatures T and baryonic densities ρB a hadron resonance gas is described using a SU(3)-flavor sigma-omega model and a quark phase is introduced in analogy to PNJL models for higher T and ρB. In this way, the correct asymptotic degrees of freedom are used in a wide range of T and ρB. Here, results of this model concerning the chiral and deconfinement phase transitions and thermodynamic model properties are presented. Large hadron resonance multiplicities in the transition region emphasize the importance of heavy-mass resonance states in this region and their impact on the chiral transition behavior. The resulting phase diagram of QCD matter at small chemical potentials is in line with latest lattice QCD and thermal model results.
We study the implications on compact star properties of a soft nuclear equation of state determined from kaon production at subthreshold energies in heavy-ion collisions. On one hand, we apply these results to study radii and moments of inertia of light neutron stars. Heavy-ion data provides constraints on nuclear matter at densities relevant for those stars and, in particular, to the density dependence of the symmetry energy of nuclear matter. On the other hand, we derive a limit for the highest allowed neutron star mass of three solar masses. For that purpouse, we use the information on the nucleon potential obtained from the analysis of the heavy-ion data combined with causality on the nuclear equation of state.
Pseudo-Critical Temperature and Thermal Equation of State from Nf = 2 Twisted Mass Lattice QCD
(2012)
We report about the current status of our ongoing study of the chiral limit of two-flavor QCD at finite temperature with twisted mass quarks. We estimate the pseudo-critical temperature Tc for three values of the pion mass in the range of mPS ~ 300 and 500 MeV and discuss different chiral scenarios. Furthermore, we present first preliminary results for the trace anomaly, pressure and energy density. We have studied several discretizations of Euclidean time up to Nt = 12 in order to assess the continuum limit of the trace anomaly. From its interpolation we evaluate the pressure and energy density employing the integral method. Here, we have focussed on two pion masses with mPS ~ 400 and 700 MeV.
A 5-gap timing RPC equipped with patterned electrodes coupled to both charge-sensitive and timing circuits yields a time accuracy of 77 ps along with a position accuracy of 38 μm. These results were obtained by calculating the straight-line fit residuals to the positions provided by a 3-layer telescope made out of identical detectors, detecting almost perpendicular cosmic-ray muons. The device may be useful for particle identification by time-of-flight, where simultaneous measurements of trajectory and time are necessary.
We study the light scalar mesons a_0(980) and kappa using N_f = 2+1+1 flavor lattice QCD. In order to probe the internal structure of these scalar mesons, and in particular to identify, whether a sizeable tetraquark component is present, we use a large set of operators, including diquark-antidiquark, mesonic molecule and two-meson operators. The inclusion of disconnected diagrams, which are technically rather challenging, but which would allow us to extend our work to e.g. the f_0(980) meson, is introduced and discussed.
It is a long discussed issue whether light scalar mesons have sizeable four-quark components. We present an exploratory study of this question using Nf = 2+1+1 twisted mass lattice QCD. A mixed action approach ignoring disconnected contributions is used to calculate correlatormatrices consisting of mesonic molecule, diquark-antidiquark and two-meson interpolating operators with quantum numbers of the scalar mesons a0(980) (1(0++)) and k (1/2(0+)). The correlation matrices are analyzed by solving the generalized eigenvalue problem. The theoretically expected free two-particle scattering states are identified, while no additional low lying states are observed. We do not observe indications for bound four-quark states in the channels investigated.
We present and compare new types of algorithms for lattice QCD with staggered fermions in the limit of infinite gauge coupling. These algorithms are formulated on a discrete spatial lattice but with continuous Euclidean time. They make use of the exact Hamiltonian, with the inverse temperature beta as the only input parameter. This formulation turns out to be analogous to that of a quantum spin system. The sign problem is completely absent, at zero and non-zero baryon density. We compare the performance of a continuous-time worm algorithm and of a Stochastic Series Expansion algorithm (SSE), which operates on equivalence classes of time-ordered interactions. Finally, we apply the SSE algorithm to a first exploratory study of two-flavor strong coupling lattice QCD, which is manageable in the Hamiltonian formulation because the sign problem can be controlled.
It is widely believed that chiral symmetry is spontaneously broken at zero temperature in the strong coupling limit of staggered fermions, for any number of colors and flavors. Using Monte Carlo simulations, we show that this conventional wisdom, based on a mean-field analysis, is wrong. For sufficiently many fundamental flavors, chiral symmetry is restored via a bulk, first-order transition. This chirally symmetric phase appears to be analytically connected with the expected conformal window of manyflavor continuum QCD. We perform simulations in the chirally symmetric phase at zero quark mass for various system sizes L, and measure the torelon mass and the Dirac spectrum. We find that all observables scale with L, which is hence the only infrared length scale. Thus, the strong-coupling chirally restored phase appears as a convenient laboratory to study IR-conformality. Finally, we present a conjecture for the phase diagram of lattice QCD as a function of the bare coupling and the number of quark flavors.
We discuss recent applications of the partonic pQCD based cascade model BAMPS with focus on heavy-ion phenomeneology in hard and soft momentum range. The nuclear modification factor as well as elliptic flow are calculated in BAMPS for RHIC end LHC energies. These observables are also discussed within the same framework for charm and bottom quarks. Contributing to the recent jet-quenching investigations we present first preliminary results on application of jet reconstruction algorithms in BAMPS. Finally, collective effects induced by jets are investigated: we demonstrate the development of Mach cones in ideal matter as well in the highly viscous regime.
The human immunodeficiency virus (HIV) is currently ranked sixth in the worldwide causes of death [1]. One treatment approach is to inhibit reverse transcriptase (RT), an enzyme essential for reverse transcription of viral RNA into DNA before integration into the host genome [2]. By using non-nucleoside RT inhibitors (NNRTIs) [3], which target an allosteric binding site, major side effects can be evaded. Unfortunately, high genetic variability of HIV in combination with selection pressure introduced by drug treatment enables the virus to develop resistance against this drug class by developing point mutations. This situation necessitates treatment with alternative NNRTIs that target the particular RT mutants encountered in a patient.
Previously, proteochemometric approaches have demonstrated some success in predicting binding of particular NNRTIs to individual mutants; however a structurebased approach may help to further improve the predictive success of such models. Hence, our aim is to rationalize the experimental activity of known NNRTIs against a variety of RT mutants by combining molecular modeling, long-timescale atomistic molecular dynamics (MD) simulation sampling and ensemble docking. Initial control experiments on known inhibitor-RT mutant complexes using this protocol were successful, and the predictivity for further complexes is currently being evaluated. In addition to predictive power, MD simulations of multiple RT mutants are providing fundamental insight into the dynamics of the allosteric NNRTI binding site which is useful for the design of future inhibitors. Overall, work of this type is hoped to contribute to the development of predictive efficacy models for individual patients, and hence towards personalized HIV treatment options.
We explore the phase diagram of two flavour QCD at vanishing chemical potential using dynamical O(a)-improved Wilson quarks. In the approach to the chiral limit we use lattices with a temporal extent of Nt = 16 and spatial extent L = 32;48 and 64 to enable the extrapolation to the thermodynamic limit with small discretisation effects. In addition to an update on the scans at constant k, reported earlier, we present first results from scans along lines of constant physics at a pion mass of 290 MeV.We probe the transition using the Polyakov loop and the chiral condensate, as well as spectroscopic observables such as screening masses.
One-photon and multi-photon absorption, spontaneous and stimulated photon emission, resonance Raman scattering and electron transfer are important molecular processes that commonly involve combined vibrational-electronic (vibronic) transitions. The corresponding vibronic transition profiles in the energy domain are usually determined by Franck-Condon factors (FCFs), the squared norm of overlap integrals between vibrational wavefunctions of different electronic states. FC profiles are typically highly congested for large molecular systems and the spectra usually become not well-resolvable at elevated temperatures. The (theoretical) analyses of such spectra are even more difficult when vibrational mode mixing (Duschinsky) effects are significant, because contributions from different modes are in general not separable, even within the harmonic approximation. A few decades ago Doktorov, Malkin and Man'ko [1979 J. Mol. Spectrosc. 77, 178] developed a coherent state-based generating function approach and exploited the dynamical symmetry of vibrational Hamiltonians for the Duschinsky relation to describe FC transitions at zero Kelvin. Recently, the present authors extended the method to incorporate thermal, single vibronic level, non-Condon and multi-photon effects in energy, time and probability density domains for the efficient calculation and interpretation of vibronic spectra. Herein, recent developments and corresponding generating functions are presented for single vibronic levels related to fluorescence, resonance Raman scattering and anharmonic transition.
The influence of an ac current of arbitrary amplitude and frequency on the mixed-state dc-voltage-ac-drive tiltingratchet response of a superconducting film with uniaxial cosine pinning potential at finite temperature is theoretically investigated. The results are obtained in the single-vortex approximation, within the frame of an exact solution of the Langevin equation for non-interacting vortices. Both experimentally achievable, the dc ratchet response and absorbed ac power are predicted to demonstrate a pronounced filter-like behavior at microwave frequencies. Based on our findings, we propose a cut-off filter and discuss its operating curves as functions of the driving parameters, i.e, ac amplitude, frequency, and dc bias. The predicted results can be examined, e.g, on superconducting films with a washboard pinning potential landscape.
The LANSCE linear accelerator at Los Alamos National Laboratory provides H− and H+ beams to several user facilities that support Isotope Production, NNSA Stockpile Stewardship, and Basic Energy Science programs. These beams are initially accelerated to 750 keV using Cockcroft-Walton (CW) based injectors that have been in operation for over 37 years. They have failure modes which can result in prolonged operational downtime due to the unavailability of replacement parts. To reduce long-term operational risks and to realize future beam performance goals in support of the Materials Test Station (MTS) and the Matter-Radiation Interactions in Extremes (MaRIE) Facility, plans are underway to develop a Radio-Frequency Quadrupole (RFQ) based front end as a modern injector replacement for the existing CW injectors. Our progress to date will be discussed.
Beam test of the direct plasma injection scheme (DPIS) is carried out successfully for the first time in China, by setting up a comprehensive test and research platform of RFQ and laser ion source. The C6+ beam is accelerated successfully, and the peak beam current reaches more than 6mA which is measured by a Faraday cup of unique structure. The RF power coupled into the RFQ cavity is also examined, and results reveal that it is the RF power of about 195kW that can produce the peak beam current.
A CW RFQ prototype
(2011)
A short RFQ prototype was built for RF-tests of high power RFQ structures. We will study thermal effects and determine critical points of the design. HF-simulations with CST Microwave Studio and measurements were done. The cw-tests with 20 kW/m RF-power and simulations of thermal effects with ALGOR were finished successfully. The optimization of some details of the HF design is on focus now. First results and the status of the project will be presented.
Accelerator Driven Systems (ADS) are promising tools for the efficient transmutation of nuclear waste products in dedicated industrial installations, called transmuters. The Myrrha project at Mol, Belgium, placed itself on the path towards these applications with a multipurpose and versatile system based on a liquid PbBi (LBE) cooled fast reactor (80 MWth) which may be operated in both critical and subcritical modes. In the latter case the core is fed by spallation neutrons obtained from a 600 MeV proton beam hitting the LBE coolant/target. The accelerator providing this beam is a high intensity CW superconducting linac which is laid out for the highest achievable reliability. The combination of a parallel redundant and of a fault tolerant scheme should allow obtaining an MTBF value in excess of 250 hours that is required for optimal integrity and successful operation of the ADS. Myrrha is expected to be operational in 2023. The forthcoming 4-year period is fully dedicated to R&D activities, and in the field of the accelerator they are strongly focused on the reliability aspects and on the proper shaping of the beam trip spectrum.
Chromatic, geometric and space charge effects on laser accelerated protons focused by a solenoid
(2011)
We studied numerically emittance and transmission effects by chromatic and geometric aberrations, with and without space charge, for a proton beam behind a solenoid in the laser proton experiment LIGHT at GSI. The TraceWin code was employed using a field map for the solenoid and an initial distribution with exponential energy dependence close to the experiment. The results show a strong effect of chromatic, and a relatively weak one of geometric aberrations as well as dependence of proton transmission on distance from the solenoid. The chromatic effect has an energy filtering property due to the finite radius beam pipe. Furthermore, a relatively modest dependence of transmission on space charge is found for p production intensity below 1011.
n order to reach the desired intensities of heavy ion beams for the experiments at FAIR, SIS18 and SIS100 have to be operated with intermediate charge states. Operation with intermediate charge state heavy ions at the intensity level of about 1011 ions per cycle has never been demonstrated elsewhere and requires a dedicated upgrade program for SIS18 and a dedicated machine design for SIS100. The specific problems coming along with the intermediate charge state operation in terms of charge exchange processes at collisions with residual gas atoms, pressure bumps by ion induced desorption and corresponding beam loss appears far below the typical space charge limits. Thus, new design concepts and new technical equipment addressing these issues are developed and realized with highest priority. The upgrade program of SIS18 addressing the goal of minimum ionization beam loss and stable residual gas pressure conditions has been defined in 2005. A major part of this upgrade program has been successfully realized, with the result of a world record in accelerated number of intermediate charge state heavy ions.
We review our knowledge of the phase diagram of QCD as a function of temperature, chemical potential and quark masses. The presence of tricritical lines at imaginary chemical potential m = i p 3 T, with known scaling behaviour in their vicinity, puts constraints on this phase diagram, especially in the case of two light flavors. We show first results in our project to determine the finite-temperature behaviour in the Nf = 2 chiral limit.
We explore the shape and orientation of the freezeout region of non-central heavy ion collisions.
For this we fit the freezeout distribution with a tilted ellipsoid. The resulting tilt angle is compared
to the same tilt angle extracted via an azimuthally sensitive HBT analysis. This allows to access
the tilt angle experimentally, which is not possible directly from the freezeout distribution. We
also show a systematic study on the system decoupling time dependence on dNch/dh, using HBT
results from the UrQMD transport model. In this study we found that the decoupling time scales
with (dNch/dh)1/3 within each energy, but the scaling is broken across energies.
We analyze general convergence properties of the Taylor expansion of observables to finite chemical potential in the framework of an effective 2+1 flavor Polyakov-quark-meson model. To compute the required higher order coefficients a novel technique based on algorithmic differentiation has been developed. Results for thermodynamic observables as well as the phase structure obtained through the series expansion up to 24th order are compared to the full model solution at finite chemical potential. The available higher order coefficients also allow for resummations, e.g. Padé series, which improve the convergence behavior. In view of our results we discuss the prospects for locating the QCD phase boundary and a possible critical endpoint with the Taylor expansion method.
We report on the first steps of an ongoing project to add gauge observables and gauge corrections
to the well-studied strong coupling limit of staggered lattice QCD, which has been shown earlier
to be amenable to numerical simulations by the worm algorithm in the chiral limit and at finite
density. Here we show how to evaluate the expectation value of the Polyakov loop in the framework
of the strong coupling limit at finite temperature, allowing to study confinement properties
along with those of chiral symmetry breaking. We find the Polyakov loop to rise smoothly, thus
signalling deconfinement. The non-analytic nature of the chiral phase transition is reflected in the
derivative of the Polyakov loop. We also discuss how to construct an effective theory for non-zero
lattice coupling, which is valid to O(b).
QCD at finite temperature and denisty remains intractable by Monte Carlo simulations for quark
chemical potentials m >∼T. It has been a long standing problem to derive effective theories from
QCD which describe the phase structure of the former with controlled errors. We propose a
solution to this problem by a combination of analytical and numerical methods. Starting from
lattice QCD with in Wilson’s formulation, we derive an effective action in terms of Polyakov
loops by means of combined strong coupling and hopping expansions. The theory correctly
reflects the centre-symmetry in the pure gauge limit and its breaking through quarks. It is valid
for heavy quarks and lattices up to Nt ∼ 6. Its sign problem can be solved and we are able to
calculate the deconfinement transition of QCD with heavy quarks for all chemical potentials.
LatticeQCD using OpenCL
(2011)
We analyze the universal critical behavior at the chiral critical point in QCD with three degenerate quark masses. We confirm that this critical point lies in the universality class of the three dimensional Ising model. The symmetry of the Ising model, which is Z(2), is not directly realized in the QCD Hamiltonian. After making an ansatz for the magnetization- and energy-like operators as linear admixtures of the chiral condensate and the gluonic action, we determine several non-universal mixing and normalization constants. These parameters determine an unambiguous mapping of the critical behavior in QCD to that of the 3d-Ising model. We verify its validity by showing that the thus obtained orderparameter scales in accordance with the magnetic equation of state of the 3d-Ising model.
In recent years, Hagedorn states have been used to explain the equilibrium and transport properties of a hadron gas close to the QCD critical temperature. These massive resonances are shown to lower h/s to near the AdS/CFT limit close to the phase transition. A comparison of the Hagedorn model to recent lattice results is made and it is found that the hadrons can reach chemical equilibrium almost immediately, well before the chemical freeze-out temperatures found in thermal fits for a hadron gas without Hagedorn states.
As the successor of the EUROTRANS project, the MAX project is aiming to continue the R&D effects for a European Accelerator-Driven System and to bring the conceptual design to reality. The layout of the driver linac for MAX will follow the reference design made for the XT-ADS phase of the EUROTRANS project. For the injector part, new design strategies and approaches, e.g. half resonant frequency, half transition-energy between the RFQ and the CH-DTL, and using the 4-rod RFQ structure instead of the originally proposed 4-vane RFQ, have been conceived and studied to reach a more reliable CW operation at reduced costs. In this paper, the design and simulation results of the MAX injector are presented.
The MYRRHA Project (Multi Purpose Hybrid Reactor for High Tech Applications) at Mol/belgium will be a user facility with emphasis on research with neutron generated by a spallation source. One main aspect is the demonstration of nuclear waste technology using an accelerator driven system. A superconducting linac delivers a 4 mA, 600 MeV proton beam. The first accelerating section is covered by the 17 MeV injector. It consists of a proton source, an RFQ, two room temperature CH cavities and 4 superconducting CH-cavities. The initial design has used an RF frequency of 352 MHz. Recently the frequency of the injector has been set to 176 MHz. The main reason is the possible use of a 4-rod-RFQ with reduced power dissipation and energy, respectively. The status of the overall injector layout including cavity design is presented.
A modern linear accelerator of ions is a long chain of different accelerating-focusing structures. The design of new linacs, as well as an upgrade and optimization of operating facilities, requires precise and reliable beam matching with the subsequent sections. Proper matching of the beam to the channel allows to improve the performance of the whole linac and to reduce the specific costs. Additionally it helps to avoide particle loss in high energy high intensity linacs. Generally a matching algorithm combines precisely measured or calculated accelerating-focusing external fields and experimentally obtained details of the beam parameters with an advanced code for beam dynamics simulations including space charge effects. Experimental results are introduced into a code as input data. The described algorithm has already been successfully implemented for several GSI projects: an upgrade of the GSI heavy ion linac UNILAC, an ion linac for the cancer therapy, the proton linac for the FAIR facility, a facility for laser acceleration of ions and others. Measured data and results of beam dynamics simulations leading to an achieved improvement of the linac performance are presented.
MYRRHA is conceived as an accelerator driven system (ADS) for transmutation of high level nuclear waste. The neutron source is created by coupling a proton accelerator of 600 MeV with a 4 mA proton beam, a spallation source and a sub-critical core. The IAP of Frankfurt University is responsible for the development of the 17 MeV injector operated at 176 MHz. The injector consists of a 1.5 MeV 4-Rod-RFQ and six CH-drifttube-structures. The first two CH-structures will be operated at room temperature and the other CH-structures are superconducting cavities assembled in one cryo-module. To achieve the extremely high reliability required by the ADS application, the design of the 17 MeV injector has been intensively studied, with respect to thermal issues, minimum peak fields and field distribution.
Usually 4-ROD Radio Frequency Quadrupoles (RFQ) are built for frequencies up to 216 MHz. For higher frequencies 4-VANE structures are more common. The advantages of 4-Rod structures, the greater flexibility for tuning and being more comfortable for maintenance, are motivating the development of a 4-Rod RFQ for higher frequencies than 216 MHz. In particular a 325 MHz RFQ with an output energy of 3 MeV is needed for the proton linac for the FAIR project of GSI. This paper reports about the design studies and the latest developments of this RFQ.
For the injector upgrade at FNAL a 4-rod Radio Frequency Quadrupole (RFQ) with a resonance frequency of 200 MHz has been build. With this short structure of only 1.3 m a very compact injector design has been realized. Simulations with CST Microwave Studio® were performed for the design. Their results leading to the RF characterizations of the RFQ and the final RF setup which has been accomplished at IAP of the Goethe-University Frankfurt are presented in this paper.
A test stand for optical beam tomography was developed. As a new non-destructive beam-diagnostic system for high current ion beams, the test stand will be installed in the low energy beam transport section (LEBT) of the Frankfurt Neutron Source (FRANZ) behind the chopper system. The test stand consists of a rotatable vacuum chamber with a mounted CCD camera. The maximum rotation angle amounts to 270°. In a first phase the optical beam profile measurement and 3D density reconstruction is tested with a time independent 10 keV He beam. The measurements and performance of data processing algorithms are compared with the beam transport simulations. In a later phase the performance with time dependent beams (120 keV, 200 mA) at a repetition rate of 250 kHz and a duty cycle of 2.5% has to be evaluated. An overview of the first phase results is shown.
A non-interceptive optical diagnostic system on the basis of beam tomography, was developed for the planned Frankfurt Neutron Source (FRANZ). The proton driver linac of FRANZ will provide energies up to 2.0 MeV. The measurement device will non-interceptively derive required beam parameters at the end of the LEBT at beam energies of 120 keV and a current of 200 mA. On a narrow space of 351.2 mm length a rotatable tomography tank will perform a multi-turn tomography with a high and stable vacuum pressure. The tank allows to plug different measurement equipment additionally to the CCD Camera installed, to perform optical beam tomography. A collection of developed algorithms provides information about the density distribution, shape, size, location and emittance on the basis of CCD images. Simulated, as well as measured data have been applied to the evaluation algorithms to test the reliability of the beam. The actual contribution gives an overview on the current diagnostic possibilities of this diagnostic system.
The HITRAP linear decelerator currently being set up at GSI will provide slow, few keV/u highly charged ions for atomic physics experiments. The expected beam intensity is up to 105 ions per shot. To optimize phase and amplitude of the RF systems intensity, bunch length and kinetic energy of the particles need to be monitored. The bunch length that we need to fit is about 2 ns, which is typically measured by capacitive pickups. However, they do not work for the low beam intensities that we face. We investigated the bunch length with a fast CVD diamond detector working in single particle counting mode. Averaging over 8 shots yields a clear, regular picture of the bunched beam. Energy measurements by capacitive pickups are limited by the presence of intense primary and partially decelerated beam and hence make tuning of the IH-structure impossible. The energy of the decelerated fraction of the beam behind the first deceleration cavity was determined to about 10 % accuracy with a permanent dipole magnet combined with a MCP. Better detector calibration should help reaching the required 1%. Design of the detectors as well as the results of the measurements will be presented.
At the Institute for Applied Physics (IAP), University of Frankfurt, a s.c. 325 MHz CH-Cavity is under development for future beam tests at GSI UNILAC, Darmstadt. The cavity with 7 accelerating cells has a geometrical beta of 0.15 corresponding to 11.4 AMeV. The design gradient is 5 MV/m. The geometry of this resonator was optimized with respect to a compact design, low peak fields, surface processing, power coupling and tuning. Furthermore a new tuning system based on bellow tuners inside the resonator will control the frequency during operation. After rf tests in Frankfurt the cavity will be tested with a 10 mA, 11.4 AMeV beam delivered by the GSI UNILAC. In this paper rf simulations, multipacting analysis as well as thermal calculations will be presented.
At GSI a new, superconducting (sc) continuous wave (cw) LINAC is under design in cooperation with the Institute for Applied Physics (IAP) of Frankfurt University and the Helmholtz Institut Mainz (HIM). This proposed LINAC is highly requested by a broad community of future users to fulfill the requirements of nuclear chemistry, nuclear physics, and especially in the research field of Super Heavy Elements (SHE). In this context the preliminary layout of the LINAC has been carried out by IAP. The main acceleration of up to 7.3 AMeV will be provided by nine sc Crossbar-H-mode (CH) cavities operated at 217 MHz. Currently, a prototype of the cw LINAC as a demonstrator is under development. The demonstrator comprises a sc CH-cavity embedded between two sc solenoids mounted in a horizontal cryomodule. A full performance test of the demonstrator in 2013/14 by injecting and accelerating a beam from the GSI High Charge Injector (HLI) is one important milestone of the project. The status of the demonstrator is presented.
The superconducting CH-structure (Crossbar-H-mode) is a multi-cell drift tube cavity for the low and medium energy range operated in the H21-mode, which has been developed at the Institute for Applied Physics (IAP) of Frankfurt University. With respect to different high power applications two types of superconducting CH-structures (f = 325 MHz, β = 0.16, seven cells and f = 217 MHz, β = 0.059, 15 cells) are presently under construction and accordingly under development. The structural mechanical simulation is a very important aspect of the cavity design. Furthermore, several simulations with ANSYS Workbench have been performed to predict the deformation of the cavity walls due to the cavity cool-down, pressure effects and mechanical vibrations. To readjust the fast frequency changes in consequence of the cavity shape deformation, a new concept for the dynamic frequency tuning has been investigated, including a novel type of bellow-tuner.
The ARMADILLO bunch compressor currently being designed at IAP is capable of reaching a longitudinal pulse compression ratio of 45 for proton beams of 150 mA at 2 MeV. It will provide one nanosecond proton pulses with a peak current of 7.7 A. The system guides nine linacμbunches deflected by a 5 MHz rf kicker and uses four dipole magnets - two homogeneous and two with field gradients - to merge them on the target. For longitudinal focusing and an energy variation of ±200 keV two multitrack rf cavities are included. ARMADILLO will be installed at the end of the Frankfurt Neutron Source FRANZ making use of the unique 250 kHz time structure. This contribution will provide an overview of the layout of the system as well as recent advances in component design and beam dynamics of the compressor.
The Frankfurt Neutron Source at the Stern-Gerlach-Zentrum is driven by a 2 MeV proton linac consisting of a 4-rod-radio-frequency-quadrupol (RFQ) and an 8 gap IH-DTL structure. RFQ and IH cavity will be powered by only one radio frequency (RF) amplifier to reduce costs. The RF-amplifier of the RFQ-IH combination is coupled into the RFQ. Internal inductive coupling along the axis connects the RFQ with the IH cavity ensuring the required power transition as well as a fixed phase relation between the two structures. The main acceleration of 120 keV up to 2.03 MeV will be reached by the RFQ-IH combination with 175 MHz and at a total length of 2.3 m. The losses in the RFQ-IH combination are about 200 kW.
Space charge lenses use a confined electron cloud for the focusing of ion beams. The focusing strength is given by the electron density whereas the density distribution influences the mapping quality of the space charge lens and is related to the confinement. The plasma parameters, loss as well as production mechanisms have a strong impact on plasma beam interactions. A scaled up space charge lens was constructed to investigate the properties of a nonneutral plasmas in detail. New non-interceptive diagnostic has been developed to characterize the collective behaviour of the confined nonneutral plasma in terms of an optimized lens design and parameters. Experimental results will be presented in comparison with numerical simulations.
Chopper systems are used to pulse charged particle beams. In most cases, electric deflection systems are used to generate beam pulses of defined lengths and appropriate repetition rates. At high beam intensities, the field distribution of the chopper system needs to be adapted precisely to the beam dynamics in order to avoid aberrations. An additional challenge is a robust design which guarantees reliable operation. For the Frankfurt Neutron Source FRANZ, an E×B chopper system is being developed which combines static magnetic deflection with a pulsed electric field in a Wien filter configuration. It will generate proton pulses with a flat top of 50 ns at a repetition rate of 250 kHz for 120 keV, 200 mA beams. For the electric deflection, pre-experiments with static and pulsed fields were performed using a helium ion beam. In pulsed mode operation, ion beams of different energies were deflected with voltages of up to ±6 kV and the resulting response was measured using a beam current transformer. A comparison between experiments and theoretical calculations as well as numerical simulations are presented.
Experimental results and theoretical predictions in laser acceleration of protons achieved energies of ten to several tens of MeV. The LIGHT project (Laser Ion Generation, Handling and Transport) is proposed to use the PHELIX laser accelerated protons and to provide transport, focusing and injection into a conventional accelerator. This study demonstrates transport and focusing of laser-accelerated 10 MeV protons by a pulsed 18 T magnetic solenoid. The effect of co-moving electrons on the beam dynamics is investigated. The unique features of the proton distribution like small emittances and high yield of the order of 1013 protons per shot open new research area. The possibility of creating laser based injectors for ion accelerators is addressed. With respect to transit energies, direct matching into DTL's seems adequate. The bunch injection into a proposed CH− structure is under investigation at IAP Frankfurt. Options and simulation tools are presented.
Space charge lenses using a stable electron cloud for focusing low energy heavy ion beams are an alternative concept to conventional ion optics. Due to external fields electrons are confined inside the lens’ volume. In case of a homogeneously distributed electron cloud the linear electric space charge field enables beam focusing free of aberration. Since the mapping quality of the lens is related to the confinement, non-destructive diagnostics has been developed to determine the plasma parameters and to characterize the collective behavior of the confined nonneutral plasma. Moreover, a scaled up space charge lens was constructed for a detailed investigation of the nonneutral plasma properties as well as beam interactions with a stable confined electron cloud. Experimental results will be presented in comparison with numerical simulations.
This novel kind of neutron beam facility will provide 1 ns short neutron pulses with an approximately thermal energy distribution around 30 keV. The pulse repetition rate will be up to 250 kHz, the total proton number per pulse will be up to 6×1010 in the final stage, starting with a p – source current of 200 mA. A second target station will allow n – activation experiments by cw beam operation. An intense 2 MeV proton beam will drive a neutron source by the 7 Li (p,n) 7 Be reaction. The facility is under construction at the physics experimental hall of the J.W. Goethe – University. The 1m thick concrete tunnel was installed in 2009. In 2011 all rf amplifiers will be delivered and installed. Successful 200 mA proton source experiments in 2010 at a test stand will be followed by experiments on the 120 kV FRANZ terminal in 2011. The 250 kHz, 100 ns chopper in front of the rf linac is under construction, while the 2 MeV bunch compressor design was finished and the technical design of all components has started. The main accelerator cavity is under construction. First 2 MeV beam tests are expected for end of 2012.
An optimized design of a stellarator-type storage ring for low energy ion beams was numerically investigated. The magnetic field variation along the circumference and therefore magnetic heating is suppressed by using simple circular correction coils. Particle-in-Cell (PIC) simulations in a magnetic flux coordinate system show the ability of high current ion beam accumulation in such a configuration with unique features for clockwise and anticlockwise moving beams. Additionally scaled down experiments with two 30 degree room temperature toroidal segments were performed to demonstrate toroidal transport and to develop optical beam diagnostics. Properties of multi-component beams, redistribution of transversal momenta in the non-adiabatic part of the experimental configuration and investigation of strongly confined beam induced electron clouds will be addressed.
The SIS300 synchrotron, planned for the new Facility for Antiproton and Ion Research (FAIR) at GSI-Darmstadt, will become the first superconducting synchrotron worldwide using cos(θ) magnets for resonant slow extraction. A multi-objective optimization algorithm has been developed for the design of the non-linear magnet scheme. The optimization algorithm makes use of the analytical model for the slow extraction from Kobayashi, the analytical description of the resonance excitation and amplitude-dependent tune-shift from Bengtsson, and corrects the chromaticity in order to fulfill the Hardt condition. As a result, the placement of the chromatic and harmonic sextupole magnets in SIS300, the number of sextupole families and the gradients of these families have been optimized for a high efficiency slow extraction. The algorithm accounts also for the sextupole errors on the dipole magnets, compensating its effects. Furthermore, optimized time-dependent settings for the sextupole magnets are generated to compensate the persistent current decay occurring at slow extraction. Tolerances for the magnets are set for the limits where the compensation is no longer valid.
SIS100 is the main synchrotron of the FAIR project. It is designed to accelerate high intensity intermediate charge state uranium beams from 200 MeV/u up to 2.7 GeV/u. Intermediate charge state heavy ions are exposed to a high probability of charge exchange due to collisions with residual gas molecules. Since the charge exchange process changes the magnetic rigidity, the involved ions are lost behind dispersive elements, and an energy-dependent gas desorption takes place. The StrahlSim code has been used to predict the stability of the residual gas pressure in SIS100 under beam loss driven dynamic conditions. The results show, that a stable operation at highest U28+ intensities is possible, under the constraint that the vacuum chambers of the ion catcher system are cold enough to pump hydrogen. Furthermore, in order to determine the load to the cryogenic system, the average beam energy deposition onto the ion catcher system has been calculated.
We discuss the implementation and results of a recently developed microscopic method for calculating ion-ion interaction potentials and fusion cross-sections. The method uses the TDHF evolution to obtain the instantaneous many-body collective state using a density constraint. The ion-ion potential as well as the coordinate dependent mass are calculated from these states. The method fully accounts for the dynamical processes present in the TDHF time-evolution and provides a parameter-free way of calculating fusion cross-sections.
Development of fragmented low-Z ion beams for the NA61 fixed-target experiment at the CERN SPS
(2011)
The NA61 experiment, aims to study the properties of the onset of deconfinement at low SPS energies and to find signatures of the critical point of strongly interacting matter. A broad range in T-μB phase diagram will be covered by performing an energy (13A-158A GeV/c) and system size (p+p, Be+Be, Ar+Ca, Xe+La) scan. In a first phase, fragmented ion beams of 7Be or 11C produced as secondaries with the same momentum per nucleon when the incident primary Pb-ion beam hits a thin Be target will be used. The H2 beam line that transports the beam to the experiment acts as a double spectrometer which combined with a new thin target (degrader) where fragments loose energy proportional to the square of their charge allows the separation of the wanted A/Z fragments. Thin scintillators and TOF measurement for the low energy points are used as particle identification devices. In this paper results from the first test of the fragmented ion beam done in 2010 will be presented showing that a pure Be beam can be obtained satisfying the needs of the experiment.
For the research program with cooled antiprotons at FAIR a dedicated 70 MeV, 70 mA proton injector is required. The main acceleration of this room temperature linac will be provided by six CH cavities operated at 325 MHz. Each cavity will be powered by a 2.5 MW Klystron. For the second acceleration unit from 11.5 MeV to 24.2 MeV a 1:2 scaled model has been built. Low level RF measurements have been performed to determine the main parameters and to prove the concept of coupled CH cavities. For this second tank technical and mechanical investigations have been performed in 2010 to develop a complete technical concept for the manufacturing. In Spring 2011, the construction of the first power prototype has started. The main components of this cavity will be ready for measurements in summer 2011. At that time, the cavity will be tested with a preliminary aluminum drift tube structure, which will allow precise frequency and field tuning. This paper will report on the recent technical development and achievements. It will outline the main fabrication steps towards that novel type of proton DTL. Also first low level RF measurements are expected.
Intense ion beams with small phase space occupation (high brilliance) are mandatory to keep beam losses low in high current injector accelerators like those planned for FAIR. The low energy beam transport from the ion source towards the linac has to keep the emittance growth low and has to support the optimization of the ion source tune. The Frankfurt Neutron Source Facility FRANZ is currently under construction. An intense beam of protons (2 MeV, 200 mA) will be used for neutron production using the Li7(p,n)Be7 reaction for studies of the astrophysical s-process. A collimation channel, which can be adjusted to allow the transport of beams with a certain beam emittance, is an ideal tool to optimize the ion source tune in terms of beam brightness. Therefore a collimation channel in the Low Energy Beam Transport section will be used. Through defined apertures and transversal phase space rotation using focusing solenoids the beam halo as well as unwanted H2+ and H3+ fractions will be cut. Theoretical studies which were carried out so far and a first design of the setup will be presented.
Beam measurements with the new RFQ beam matching section at the Frankfurt Funneling Experiment
(2011)
Funneling is a method to increase low energy beam currents in multiple stages. The Frankfurt Funneling Experiment is a model of such a stage. The experiment is built up of two ion sources with electrostatic lens systems, a Two-Beam-RFQ accelerator, a funneling deflector and a beam diagnostic system. The two beams are bunched and accelerated in a Two-Beam RFQ. A funneling deflector combines the bunches to a common beam axis. A new beam transport system between RFQ accelerator and deflector has been constructed and mounted. With these extended RFQ-electrodes the drift between the Two-Beam-RFQ and the rf-deflector will be minimized and therefore unwanted emittance growth reduced. After first rf measurements current work are beam tests with the improved Two-Beam-RFQ. First results will be presented.
8th International Conference on Nuclear Physics at Storage Rings Stori11, October 9-14, 2011 Laboratori Nazionale di Frascati, Italy.
Storage rings offer the possibility of measuring proton- and alpha-induced reactions in inverse kinematics. The combination of this approachwith a radioactive beamfacility allows, in principle, the determination of the respective cross sections for radioactive isotopes. Such data are highly desired for a better understanding of astrophysical nucleosynthesis processes like the p-process. A pioneering experiment has been performed at the Experimental Storage Ring (ESR) at GSI using a stable 96Ru beam at 9-11 AMeV and a hydrogen target. Monte-Carlo simulations of the experiment were made using the Geant4 code. In these simulations, the experimental setup is described in detail and all reaction channels can be investigated. Based on the Geant4 simulations, a prediction of the shape of different spectral components can be performed. A comparison of simulated predictions with the experimental results shows a good agreement and allows the extraction of the cross section.
We present results of lattice QCD simulations with mass-degenerate up and down and mass-split strange and charm (Nf = 2+1+1) dynamical quarks using Wilson twisted mass fermions at maximal twist. The tuning of the strange and charm quark masses is performed at three values of the lattice spacing a ~ 0:06 fm, a ~ 0:08 fm and a ~ 0:09 fm with lattice sizes ranging from L ~ 1:9 fm to L ~ 3:9 fm. We perform a preliminary study of SU(2) chiral perturbation theory by combining our lattice data from these three values of the lattice spacing.
We compute the static-light baryon spectrum with Nf = 2 flavors of sea quarks using Wilson twisted mass lattice QCD. As light valence quarks we consider quarks, which have the same mass as the sea quarks with corresponding pion masses in the range 340MeV<∼ mPS<∼ 525MeV, as well as partially quenched quarks, which have the mass of the physical s quark. We extract masses of states with isospin I = 0,1/2,1, with strangeness S = 0,−1,−2, with angular momentum of the light degrees of freedom j = 0,1 and with parity P = +,−. We present a preliminary extrapolation in the light u/d and an interpolation in the heavy b quark mass to the physical point and compare with available experimental results.
The isospin, spin and parity dependent potential of a pair of static-light mesons is computed using Wilson twisted mass lattice QCD with two flavors of degenerate dynamical quarks. From the results a simple rule can be deduced stating, which isospin, spin and parity combinations correspond to attractive and which to repulsive forces.
The QCD phase diagram as a function of temperature, T, and chemical potential for baryon
number, mB, is still unknown today, due to the sign problem, which prohibits direct Monte Carlo
simulations for non-vanishing baryon density. Investigations in models sharing chiral symmetry
with QCD predict a phase diagram, in which the transition corresponds to a smooth crossover at
zero density, but which is strengthened by chemical potential to turn into a first order transition
beyond some second order critical point. This contribution reviews the lattice evidence in favour
and against the existence of a critical point.
The CBM experiment will investigate heavy-ion collisions at beam energies from 8 to 45 AGeV at the future accelerator facility FAIR. The goal of the experiment is to study the QCD phase diagram in the vincinity of the QCD critical point. To do so, CBM aims at measuring rare probes among them open charm. In order to identify those rare and short lived particles despite the rich combinatorial background generated in heavy ion collisions, a micro vertex detector (MVD) providing an unprecedented combination of high rate capability and radiation hardness, very light material budget and excellent granularity is required. In this work, we will discuss the concept of this detector and summarize the status of the R&D.
CMOS sensors are the most promising candidates for the Micro-Vertex-Detector (MVD) of the CBM experiment at GSI, as they provide an unprecedented compromise between spatial resolution, low material budget, adequate radiation tolerance and readout speed. To study the integration of these sensors into a detector module, a so-called MVD-demonstrator has been developed. The demonstrator and its in-beam performance will be presented and discussed in this work.