Conference Proceeding
Refine
Year of publication
Document Type
- Conference Proceeding (248) (remove)
Has Fulltext
- yes (248)
Is part of the Bibliography
- no (248)
Keywords
Institute
- Physik (248) (remove)
In this proceeding we review our recent work using supervised learning with a deep convolutional neural network (CNN) to identify the QCD equation of state (EoS) employed in hydrodynamic modeling of heavy-ion collisions given only final-state particle spectra ρ(pT, Ф). We showed that there is a traceable encoder of the dynamical information from phase structure (EoS) that survives the evolution and exists in the final snapshot, which enables the trained CNN to act as an effective “EoS-meter” in detecting the nature of the QCD transition.
The standard implementation of the HRG model has been shown to be unable to describe all the available data on QCD matter. Here we show the balance of repulsive and attractive hadronic interactions on QCD thermodynamics through observables both calculated by lattice simulations and measured in experiment. Attractive interactions are mediated by resonance formation, which are here implemented through extra states predicted by the Quark Model, while repulsive interactions are modelled by means of Excluded Volume (EV) effects. Informations on flavour dependent effective sizes are extracted. It is found that EV effects are present in lattice QCD thermodynamics, and are essential for a comprehensive description of higher order fluctuations of conserved charges.
This paper traces the military role of Tibnīn and its rulers in the Latin East against the Muslims until 1187/ 583. Tibnīn played a key role in overcoming the Muslims in Tyre and controlled it in 1124. It also played a vital role in the conflict between Damascus and the Kingdom of Jerusalem. Tibnīn participated in defending Antioch, Banyas, Hebron and Transjordan several times. Furthermore, its soldiers and Knights joined the army of the Kingdom of Jerusalem to capture Ascalon in 1153, and joined the campaigns of Amaury I, King of Jerusalem, against Egypt from 1164 to1169. The military situation of Tibnīn under the rule of the royal house until its fall to the Muslims in 1187/ 583 will be studied as well
We will discuss the issue of Landau levels of quarks in lattice QCD in an external magnetic field. We will show that in the two-dimensional case the lowest Landau level can be identified unambiguously even if the strong interactions are turned on. Starting from this observation, we will then show how one can define a “plowest Landau level” in the four-dimensional case, and discuss how much of the observed effects of a magnetic field can be explained in terms of it. Our results can be used to test the validity of low-energy models of QCD that make use of the lowest-Landau-level approximation.
The QCD phase diagram at finite temperature and density has attracted considerable interest over many decades now, not least because of its relevance for a better understanding of heavy-ion collision experiments. Models provide some insight into the QCD phase structure but usually rely on various parameters. Based on renormalization group arguments, we discuss how the parameters of QCD low-energy models can be determined from the fundamental theory of the strong interaction. We particularly focus on a determination of the temperature dependence of these parameters in this work and comment on the effect of a finite quark chemical potential. We present first results and argue that our findings can be used to improve the predictive power of future model calculations.
We discuss the effects of the final hadronic state, in ultra-relativistic nuclear collisions, on hadronic resonance properties and measurable production rates. In particular we will compare our results with recent ALICE data on resonance production. We show that the hadronic phase of the system evolution has a considerable impact on the measured resonance ratios and pT spectra. We also discuss some of the remaining uncertainties in the model and how they may be addressed in future studies.
In this talk we discuss the effects of the hadronic rescattering on final state observables in high energy nuclear collisions. We do so by employing the UrQMD transport model for a realistic description of the hadronic decoupling process. The rescattering of hadrons modifies every hadronic bulk observable. For example apparent multiplicity of resonances is suppressed as compared to a chemical equilibrium freeze-out model. Stable and unstable particles change their momentum distribution by more than 30% through rescattering. The hadronic rescattering also leads to a substantial decorrelation of the conserved charge distributions. These findings show that it is all but trivial to conclude from the final state observables on the properties of the system at an earlier time where it may have been in or close to local equilibrium.
The dynamics of strange vector meson resonances (K* and K̄*) is investigated within the Parton-Hadron-String Dynamics (PHSD) transport approach. We present the time evolution of the production of K*− resonances from the QGP phase by quark fusion as well as from hadronic sources. We also give a brief overview of the modification of the K* through Kπ decay and K*N interaction in a hot and dense nuclear medium.
A full session was organized in memory of Helmut Oeschler during the 2017 edition of the Strangeness in Quark Matter Conference. It was heart-warming to discuss with the audience his main achievements and share anecdotes about this exceptionally praised and appreciated colleague, who was also a great friend for many at the conference. A brief summary of the session is provided with these proceedings.
Observations of long rang azimuthal correlations in small collision systems (p+p/A) have triggered an enormous excitement in the heavy-ion community. However, it is presently unclear to what extent the experimentally observed correlations should be attributed to initial state momentum correlations and/or the final state response to the initial state geometry. We discuss how a consistent theoretical description of the nonequilibrium dynamics is important to address both effects within a unified framework and present first results from weakly coupled non-equilibrium simulations in [1] to quantify the relative importance of initial state and final state effects based on theoretical calculations.
We compute hybrid static potentials in SU(3) lattice gauge theory. We present a method to automatically generate a large set of suitable creation operators with defined quantum numbers from elementary building blocks. We show preliminary results for several channels and discuss, which structures of the gluonic flux tube seem to be realized by the ground states in these channels.
We discuss the current developments by the European Twisted Mass Collaboration in extracting parton distribution functions from the quasi-PDF approach. We concentrate on the non-perturbative renormalization prescription recently developed by us, using the RI′ scheme. We show results for the renormalization functions of matrix elements needed for the computation of quasi-PDFs, including the conversion to the MS scheme, and for renormalized matrix elements. We discuss the systematic effects present in the Z-factors and the possible ways of addressing them in the future.
We report on the status of ongoing investigations aiming at locating the deconfinement critical point with standard Wilson fermions and Nf = 2 flavors towards the continuum limit (standard Columbia plot); locating the tricritical masses at imaginary chemical potential with unimproved staggered fermions at Nf = 2 (extended Columbia plot); identifying the order of the chiral phase transition at μ = 0 for Nf = 2 via extrapolation from non integer Nf (alternative Columbia plot).
Targeting for rare observables, the CBM experiment will operate at high interaction rates of up to 10 MHz, which is unprecedented in heavy-ion experiments so far. It requires a novel free-streaming readout system and a new concept of data processing. The huge data rates of the CBM experiment will be reduced online to the recordable rate before saving the data to the mass storage. Full collision reconstruction and selection will be performed online in a dedicated processor farm. In order to make an efficient event selection online a clean sample of particles has to be provided by the reconstruction package called First Level Event Selection (FLES).
The FLES reconstruction and selection package consists of several modules: track finding, track fitting, event building, short-lived particles finding, and event selection. Since detector measurements contain also time information, the event building is done at all stages of the reconstruction process. The input data are distributed within the FLES farm in a form of time-slices. A time-slice is reconstructed in parallel between processor cores. After all tracks of the whole time-slice are found and fitted, they are collected into clusters of tracks originated from common primary vertices, which then are fitted, thus identifying the interaction points. Secondary tracks are associated with primary vertices according to their estimated production time. After that short-lived particles are found and the full event building process is finished. The last stage of the FLES package is a selection of events according to the requested trigger signatures. The event reconstruction procedure and the results of its application to simulated collisions in the CBM detector setup are presented and discussed in detail.
Professor Walter Greiner, our mentor, colleague, and friend, passed away in the age of eighty. During his lifetime, the search for elements beyond uranium started and elements up to the so far heaviest one with atomic number 118 were discovered. In this talk I will present a short history from early searches for ‘trans-uraniums’ up to the production and safe identification of shell-stabilized ‘Super-Heavy Nuclei’ (SHN). The nuclear shell model reveals that these nuclei should be located in a region with closed shells for the protons at Z = 114, 120 or 126 and for the neutrons at N = 184. The outstanding aim of experimental investigations is the exploration of this region of spherical SHN. Systematic studies of heavy ion reactions for the synthesis of SHN revealed production cross-sections which reached values down to one picobarn and even below for the heaviest species. The systematics of measured cross-sections can be understood only on the basis of relatively high fission barriers as predicted for nuclei in and around the island of SHN. A key role in answering some of the open questions plays the synthesis of isotopes of element 120. Attempts aiming for synthesizing this element at the velocity filter SHIP will be reported.
We study tetraquark resonances with lattice QCD potentials computed for two static quarks and two dynamical quarks, the Born-Oppenheimer approximation and the emergent wave method of scattering theory. As a proof of concept we focus on systems with isospin I = 0, but consider different relative angular momenta l of the heavy b quarks. We compute the phase shifts and search for S and T matrix poles in the second Riemann sheet. We predict a new tetraquark resonance for l = 1, decaying into two B mesons, with quantum numbers I(JP) = 0(1−), mass MeV and decay width MeV.
We investigate the well-known vector state ψ(4040) in the frame-work of a quantum field theoretical model. In particular, we study its spectral function and search for the pole(s) in the complex plane. Quite interestingly, the spectral function has a non-standard shape and two poles are present. The role of the meson-meson quantum loops (in particular DD* ones) is crucial and could also explain the not yet conformed “state” Y(4008).
As a first step, a simple and pedagogical recall of the η-η′ system is presented, in which the role of the axial anomaly, related to the heterochiral nature of the multiplet of (pseudo)scalar states, is underlined. As a consequence, η is close to the octet and η′ to the singlet configuration. On the contrary, for vector and tensor states, which belong to homochiral multiplets, no anomalous contribution to masses and mixing is present. Then, the isoscalar physical states are to a very good approximation nonstrange and strange, respectively. Finally, for pseudotensor states, which are part of an heterochiral multiplet (just as pseudoscalar ones), a sizable anomalous term is expected: η2(1645) roughly corresponds to the octet and η2(1870) to the singlet.
Charmonia with different transverse momentum pT usually comes from different mechanisms in the relativistic heavy ion collisions. This work tries to review the theoretical studies on quarkonium evolutions in the deconfined medium produced in p-Pb and Pb-Pb collisions. The charmonia with high pT are mainly from the initial hadronic collisions, and therefore sensitive to the initial energy density of the bulk medium. For those charmonia within 0.1 < pT < 5 GeV/c at the energies of Large Hadron Collisions (LHC), They are mainly produced by the recombination of charm and anti-charm quarks in the medium. In the extremely low pT ∼ 1/RA (RA is the nuclear radius), additional contribution from the coherent interactions between electromagnetic fields generated by one nucleus and the target nucleus plays a non-negligible role in the J/ψ production even in semi-central Pb-Pb collisions.
Using a partonic transport model we investigate the evolution of conical structures in ultrarelativistic matter. Using two different source terms and varying the transport properties of the matter we study the formation of Mach Cones. Furthermore, in an additional study we extract the two-particle correlations from the numerical calculations and compare them to an analytical approximation. The influence of the viscosity to the shape of Mach Cones and the corresponding two-particle correlations is studied by adjusting the cross section of the medium.
In the 1960s, theoretical concepts prepared the path to nuclear matter with proton and neutron numbers far beyond the nuclei known at that time. The new laboratory GSI was founded for research on reactions with heavy ions, in particular those for production of the predicted super-heavy nuclei. In this contribution it is presented how the interaction between experiment and theory resulted in a continuous improvement of the experimental set-ups on the one hand, and of the knowledge of the processes during the nuclear reaction and of the properties of the produced nuclei on the other hand. In the course of this work six new elements from 107 to 112 were produced and identified. An overview of the present status of experimental results and a comparison with theoretical interpretations is given.
We have studied one-proton-removal reactions of about 500MeV/u 17Ne beams on a carbon target at the R3B/LAND setup at GSI by detecting beam-like 15O-p and determining their relative-energy distribution. We exclusively selected the removal of a 17Ne halo proton, and the Glauber-model analysis of the 16F momentum distribution resulted in an s2 contribution in the 17Ne ground state of about 40%.
p-process nucleosynthesis via proton-capture reactions in thermonuclear supernovae explosions
(2015)
Model calculations within the framework of the so-called γ process show an underproduction of the p nucleus with the highest isotopic abundace 92Mo. This discrepancy can be narrowed by taking into account the alternative production site of a type Ia supernova explosion. Here, the nucleus 92Mo can be produced by a sequence of proton-capture reactions. The amount of 92Mo nuclei produced via this reaction chain is most sensitive to the reactions 90Zr(p,γ) and 91Nb(p,γ). Both rates have to be investigated experimentally to study the impact of this nucleosynthesis aspect on the long-standing 92Mo-problem. We have already measured the proton-capture reaction on 90Zr using high-resolution in-beam γ-ray spectroscopy. In this contribution, we will present our preliminary results of the total cross sections as well as the partial cross sections. Furthermore, we plan to measure the 91Nb(p,γ) reaction soon. Due to the radioactive target material, the 91Nb nuclei have to be produced prior to the experiment. The current status of this production will be presented in this contribution.
The Compressed Baryonic Matter (CBM) experiment [1] is a fixed target heavy-ion experiment that will operate at the international Facility for Antiproton and Ion Research (FAIR) [2] now under construction in Darmstadt, Germany. The experiment intends to study rare probes, which are emitted from heavy ion collisions with a beam energy of 4 to 45 AGeV. A focus is laid to the short lived open charm particles and to particles decaying into di-lepton pairs. Handling the up to 107 Au+Au collisions/s required for generating those probes with sufficient statistics, as much as reaching the required sensitivity for observing them, forms a major challenge for the silicon detectors of the experiment. We present the concept and the development status of two central detectors of CBM, the CMOS pixel based micro vertex detector (MVD) and the micro-strip detector based silicon tracking system (STS).
22nd International Workshop on Vertex Detectors, 15-20 September 2013 Lake Starnberg, Germany
XIII Nuclei in the Cosmos, 7-11 July, 2014 Debrecen, Hungary.
As an alternative production scenario to the so-called g process, the most abundant p nucleus 92Mo may be produced by a chain of proton-capture reactions in supernovae type Ia. The reactions 90Zr(p,g) and 91Nb(p,g) are the most important reactions in this chain. We have measured the first reaction using high-resolution in-beam g-spectroscopy at HORUS, Cologne, Germany, to contribute to the existing experimental data base. So far, we only investigated the high-energy part of the Gamow window and the analysis is still in progress. We plan to study the second reaction in standard kinematics at the FRANZ facility, Frankfurt, Germany. Current developments at FRANZ will be explained in detail.
We present the results of two-pion production in tagged quasi-free np collisions at a deutron incident beam energy of 1.25 GeV/c measured with the High-Acceptance Di-Electron Spectrometer (HADES) installed at GSI. The specific acceptance of HADES allowed for the first time to obtain high-precision data on π+π− and π−π0 production in np collisions in a region corresponding to large transverse momenta of the secondary particles. The obtained differential cross section data provide strong constraints on the production mechanisms and on the various baryon resonance contributions (∆∆, N(1440), N(1520), ∆(1600)). The invariant mass and angular distributions from the np → npπ+π −and np → ppπ−π0 reactions are compared with different theoretical model predictions.
We have measured the radiative neutron-capture cross section and the total neutron-induced cross section of one of the most important isotopes for the s process, the 25Mg. The measurements have been carried out at the neutron time-of-flight facilities n_TOF at CERN (Switzerland) and GELINA installed at the EC-JRC-IRMM (Belgium). The cross sections as a function of neutron energy have been measured up to approximately 300 keV, covering the energy region of interest to the s process. The data analysis is ongoing and preliminary results show the potential relevance for the s process.
We discuss recent applications of the partonic perturbative QCD based cascade model BAMPS with focus on heavy-ion phenomenology in the hard and soft momentum range. First, the elliptic flow and suppression of charm and bottom quarks are studied at LHC energies. Thereafter, we compare in a detailed study the standard Gunion-Bertsch approximation of the matrix elements for inelastic processes to the exact results in leading order perturbative QCD. Since a disagreement is found, we propose an improved Gunion-Bertsch matrix element, which agrees with the exact result in all phase space regions.
We investigate the properties of the QCD matter across the deconfinement phase transition. In the scope of the parton-hadron string dynamics (PHSD) transport approach, we study the strongly interacting matter in equilibrium as well as the out-of equilibrium dynamics of relativistic heavy-ion collisions. We present here in particular the results on the electromagnetic radiation, i.e. photon and dilepton production, in relativistic heavy-ion collisions and the relevant correlator in equilibrium, i.e. the electric conductivity. By comparing our calculations for the heavy-ion collisions to the available data, we determine the relative importance of the various production sources and address the possible origin of the observed strong elliptic flow ν2 of direct photons.
We present results for calculating fusion cross-sections using a new microscopic approach based on a time-dependent density-constrained DFT calculations. The theory is implemented by using densities and other information obtained from TDDFT time-evolution of the nuclear system as a constraint on the density for DFT calculations.
There are only 3 methods for the production of heavy and superheavy (SH) nuclei, namely, fusion reactions, a sequence of neutron capture and beta(-) decay and multinucleon transfer reactions. Low values of the fusion cross sections and very short half-lives of nuclei with Z<120 put obstacles in synthesis of new elements. At the same time, an important area of SH isotopes located between those produced in the cold and hot fusion reactions remains unstudied yet. This gap could be filled in fusion reactions of 48Ca with available lighter isotopes of Pu, Am, and Cm. New neutron-enriched isotopes of SH elements may be produced with the use of a 48Ca beam if a 250Cm target would be prepared. In this case we get a real chance to reach the island of stability owing to a possible beta(+) decay of 291114 and 287112 nuclei formed in this reaction with a cross section of about 0.8 pb. A macroscopic amount of the long-living SH nuclei located at the island of stability may be produced by using the pulsed nuclear reactors of the next generation only if the neutron fluence per pulse will be increased by about three orders of magnitude. Multinucleon transfer processes look quite promising for the production and study of neutron-rich heavy nuclei located in upper part of the nuclear map not reachable by other reaction mechanisms. Reactions with actinide beams and targets are of special interest for synthesis of new neutron-enriched transfermium nuclei and not-yet-known nuclei with closed neutron shell N=126 having the largest impact on the astrophysical r-process. The estimated cross sections for the production of these nuclei allows one to plan such experiments at currently available accelerators.
The HITRAP linear decelerator currently being set up at GSI will provide slow, few keV/u highly charged ions for atomic physics experiments. The expected beam intensity is up to 105 ions per shot. To optimize phase and amplitude of the RF systems intensity, bunch length and kinetic energy of the particles need to be monitored. The bunch length that we need to fit is about 2 ns, which is typically measured by capacitive pickups. However, they do not work for the low beam intensities that we face. We investigated the bunch length with a fast CVD diamond detector working in single particle counting mode. Averaging over 8 shots yields a clear, regular picture of the bunched beam. Energy measurements by capacitive pickups are limited by the presence of intense primary and partially decelerated beam and hence make tuning of the IH-structure impossible. The energy of the decelerated fraction of the beam behind the first deceleration cavity was determined to about 10 % accuracy with a permanent dipole magnet combined with a MCP. Better detector calibration should help reaching the required 1%. Design of the detectors as well as the results of the measurements will be presented.
A test stand for optical beam tomography was developed. As a new non-destructive beam-diagnostic system for high current ion beams, the test stand will be installed in the low energy beam transport section (LEBT) of the Frankfurt Neutron Source (FRANZ) behind the chopper system. The test stand consists of a rotatable vacuum chamber with a mounted CCD camera. The maximum rotation angle amounts to 270°. In a first phase the optical beam profile measurement and 3D density reconstruction is tested with a time independent 10 keV He beam. The measurements and performance of data processing algorithms are compared with the beam transport simulations. In a later phase the performance with time dependent beams (120 keV, 200 mA) at a repetition rate of 250 kHz and a duty cycle of 2.5% has to be evaluated. An overview of the first phase results is shown.
Space charge lenses use a confined electron cloud for the focusing of ion beams. The focusing strength is given by the electron density whereas the density distribution influences the mapping quality of the space charge lens and is related to the confinement. The plasma parameters, loss as well as production mechanisms have a strong impact on plasma beam interactions. A scaled up space charge lens was constructed to investigate the properties of a nonneutral plasmas in detail. New non-interceptive diagnostic has been developed to characterize the collective behaviour of the confined nonneutral plasma in terms of an optimized lens design and parameters. Experimental results will be presented in comparison with numerical simulations.
A non-interceptive optical diagnostic system on the basis of beam tomography, was developed for the planned Frankfurt Neutron Source (FRANZ). The proton driver linac of FRANZ will provide energies up to 2.0 MeV. The measurement device will non-interceptively derive required beam parameters at the end of the LEBT at beam energies of 120 keV and a current of 200 mA. On a narrow space of 351.2 mm length a rotatable tomography tank will perform a multi-turn tomography with a high and stable vacuum pressure. The tank allows to plug different measurement equipment additionally to the CCD Camera installed, to perform optical beam tomography. A collection of developed algorithms provides information about the density distribution, shape, size, location and emittance on the basis of CCD images. Simulated, as well as measured data have been applied to the evaluation algorithms to test the reliability of the beam. The actual contribution gives an overview on the current diagnostic possibilities of this diagnostic system.
Intense ion beams with small phase space occupation (high brilliance) are mandatory to keep beam losses low in high current injector accelerators like those planned for FAIR. The low energy beam transport from the ion source towards the linac has to keep the emittance growth low and has to support the optimization of the ion source tune. The Frankfurt Neutron Source Facility FRANZ is currently under construction. An intense beam of protons (2 MeV, 200 mA) will be used for neutron production using the Li7(p,n)Be7 reaction for studies of the astrophysical s-process. A collimation channel, which can be adjusted to allow the transport of beams with a certain beam emittance, is an ideal tool to optimize the ion source tune in terms of beam brightness. Therefore a collimation channel in the Low Energy Beam Transport section will be used. Through defined apertures and transversal phase space rotation using focusing solenoids the beam halo as well as unwanted H2+ and H3+ fractions will be cut. Theoretical studies which were carried out so far and a first design of the setup will be presented.
Beam test of the direct plasma injection scheme (DPIS) is carried out successfully for the first time in China, by setting up a comprehensive test and research platform of RFQ and laser ion source. The C6+ beam is accelerated successfully, and the peak beam current reaches more than 6mA which is measured by a Faraday cup of unique structure. The RF power coupled into the RFQ cavity is also examined, and results reveal that it is the RF power of about 195kW that can produce the peak beam current.
A CW RFQ prototype
(2011)
A short RFQ prototype was built for RF-tests of high power RFQ structures. We will study thermal effects and determine critical points of the design. HF-simulations with CST Microwave Studio and measurements were done. The cw-tests with 20 kW/m RF-power and simulations of thermal effects with ALGOR were finished successfully. The optimization of some details of the HF design is on focus now. First results and the status of the project will be presented.
Beam measurements with the new RFQ beam matching section at the Frankfurt Funneling Experiment
(2011)
Funneling is a method to increase low energy beam currents in multiple stages. The Frankfurt Funneling Experiment is a model of such a stage. The experiment is built up of two ion sources with electrostatic lens systems, a Two-Beam-RFQ accelerator, a funneling deflector and a beam diagnostic system. The two beams are bunched and accelerated in a Two-Beam RFQ. A funneling deflector combines the bunches to a common beam axis. A new beam transport system between RFQ accelerator and deflector has been constructed and mounted. With these extended RFQ-electrodes the drift between the Two-Beam-RFQ and the rf-deflector will be minimized and therefore unwanted emittance growth reduced. After first rf measurements current work are beam tests with the improved Two-Beam-RFQ. First results will be presented.
Usually 4-ROD Radio Frequency Quadrupoles (RFQ) are built for frequencies up to 216 MHz. For higher frequencies 4-VANE structures are more common. The advantages of 4-Rod structures, the greater flexibility for tuning and being more comfortable for maintenance, are motivating the development of a 4-Rod RFQ for higher frequencies than 216 MHz. In particular a 325 MHz RFQ with an output energy of 3 MeV is needed for the proton linac for the FAIR project of GSI. This paper reports about the design studies and the latest developments of this RFQ.
For the injector upgrade at FNAL a 4-rod Radio Frequency Quadrupole (RFQ) with a resonance frequency of 200 MHz has been build. With this short structure of only 1.3 m a very compact injector design has been realized. Simulations with CST Microwave Studio® were performed for the design. Their results leading to the RF characterizations of the RFQ and the final RF setup which has been accomplished at IAP of the Goethe-University Frankfurt are presented in this paper.
The LANSCE linear accelerator at Los Alamos National Laboratory provides H− and H+ beams to several user facilities that support Isotope Production, NNSA Stockpile Stewardship, and Basic Energy Science programs. These beams are initially accelerated to 750 keV using Cockcroft-Walton (CW) based injectors that have been in operation for over 37 years. They have failure modes which can result in prolonged operational downtime due to the unavailability of replacement parts. To reduce long-term operational risks and to realize future beam performance goals in support of the Materials Test Station (MTS) and the Matter-Radiation Interactions in Extremes (MaRIE) Facility, plans are underway to develop a Radio-Frequency Quadrupole (RFQ) based front end as a modern injector replacement for the existing CW injectors. Our progress to date will be discussed.
n order to reach the desired intensities of heavy ion beams for the experiments at FAIR, SIS18 and SIS100 have to be operated with intermediate charge states. Operation with intermediate charge state heavy ions at the intensity level of about 1011 ions per cycle has never been demonstrated elsewhere and requires a dedicated upgrade program for SIS18 and a dedicated machine design for SIS100. The specific problems coming along with the intermediate charge state operation in terms of charge exchange processes at collisions with residual gas atoms, pressure bumps by ion induced desorption and corresponding beam loss appears far below the typical space charge limits. Thus, new design concepts and new technical equipment addressing these issues are developed and realized with highest priority. The upgrade program of SIS18 addressing the goal of minimum ionization beam loss and stable residual gas pressure conditions has been defined in 2005. A major part of this upgrade program has been successfully realized, with the result of a world record in accelerated number of intermediate charge state heavy ions.
Accelerator Driven Systems (ADS) are promising tools for the efficient transmutation of nuclear waste products in dedicated industrial installations, called transmuters. The Myrrha project at Mol, Belgium, placed itself on the path towards these applications with a multipurpose and versatile system based on a liquid PbBi (LBE) cooled fast reactor (80 MWth) which may be operated in both critical and subcritical modes. In the latter case the core is fed by spallation neutrons obtained from a 600 MeV proton beam hitting the LBE coolant/target. The accelerator providing this beam is a high intensity CW superconducting linac which is laid out for the highest achievable reliability. The combination of a parallel redundant and of a fault tolerant scheme should allow obtaining an MTBF value in excess of 250 hours that is required for optimal integrity and successful operation of the ADS. Myrrha is expected to be operational in 2023. The forthcoming 4-year period is fully dedicated to R&D activities, and in the field of the accelerator they are strongly focused on the reliability aspects and on the proper shaping of the beam trip spectrum.
Development of fragmented low-Z ion beams for the NA61 fixed-target experiment at the CERN SPS
(2011)
The NA61 experiment, aims to study the properties of the onset of deconfinement at low SPS energies and to find signatures of the critical point of strongly interacting matter. A broad range in T-μB phase diagram will be covered by performing an energy (13A-158A GeV/c) and system size (p+p, Be+Be, Ar+Ca, Xe+La) scan. In a first phase, fragmented ion beams of 7Be or 11C produced as secondaries with the same momentum per nucleon when the incident primary Pb-ion beam hits a thin Be target will be used. The H2 beam line that transports the beam to the experiment acts as a double spectrometer which combined with a new thin target (degrader) where fragments loose energy proportional to the square of their charge allows the separation of the wanted A/Z fragments. Thin scintillators and TOF measurement for the low energy points are used as particle identification devices. In this paper results from the first test of the fragmented ion beam done in 2010 will be presented showing that a pure Be beam can be obtained satisfying the needs of the experiment.